2016-12-31

• Added in Drawings/1:18 Undecorated section:
  • 16 GE C30-7 drawings (LN and SCL versions)

2016-12-30

• Added in Drawings/1:18 Undecorated section:
  • 2 GE C30-7 drawings (SCL Phase 1a version)
  • 2 GE C30-7A drawings
  • 2 GE C36-7 drawings (CR version)
• Revised in Drawings/1:18 Undecorated section:
  • GE B23-7 and B36-7 drawings (Phase 3b versions)
    • Added missing side sill hatch ahead of left rear jacking pad
    • Changed horn to Leslie RS-type (CR B36-7 variations)
  • GE C30-7 drawings (CR version)
    • Added flange lubricators
    • Corrected front left truck brake line
    • Added missing right rear air pipe vent valve
    • Revised top corner steps
  • GE C39-8 drawings (CR versions)
    • Added flange lubricators
• Revised in Drawings/1:18 Painted section:
  • CR #5002 (GE B36-7)
    • Added missing side sill hatch ahead of rear jacking pad
    • Changed horn to Leslie RS-type
• Updated in Locomotive Phases section:
  • GE C30-7, C30-7A, C36-7 Phases
    • Converted phases to tabular format
    • Added Phases 1b and 2d

2016-12-29

• Added in Drawings/1:18 Painted section:
  • FWWR #2000 (EMD GP38-3)

2016-12-28

• Added in Drawings/1:18 Undecorated section:
  • 2 GE BQ23-7 drawings
  • 4 GE B30-7 drawings (SCL versions)
• Added in Drawings/1:18 Painted section:
  • SCL #5134 (GE BQ23-7)
• Updated in Locomotive Phases section:
  • GE B23-7, B30-7, B30-7A, B36-7 Phases
    • Converted phases to tabular format
    • Added Phase 2d

2016-12-27

• Added in Drawings/1:18 Undecorated section:
  • 6 GE B23-7 (LN, PW and SCL versions)
  • 2 GE B30-7 drawings (SLSF version)

2016-12-16

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD GP60 drawings (TM version)
  • 2 GMD SD40-2F drawings (as modified version)
• Added in Drawings/1:18 Painted section:
  • CMQ #9017 (GMD SD40-2F)
  • CN #9511 (GMD GP40-2L(W)) - 1,000th 1:18 drawing
  • CP #9009 (GMD SD40-2F)

2016-12-15

• Added in Drawings/1:18 Undecorated section:
  • 2 GMD SD40-2F drawings

2016-12-14

• Added in Drawings/1:18 Undecorated section:
  • 5 GMD SD40-2 drawings (CP Phase 2b, 2c and 2d1 versions)
• Revised in Drawings/1:18 Undecorated section:
  • All GMD SD40-2 drawings
    • Removed plate between bell bracket
    • Removed air dryer on engineer's side (Phase 1b and 2a units)
    • Revised center axle shock strut (Phase 2a units)
    • Shorter corner handrails (Phase 2a units)
    • Added fuel gauge on front of fuel tank (Phase 2a units)

2016-11-19

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD GP38-3 drawings (FWWR 2004-2005)

2016-11-18

• Added in Drawings/1:18 Undecorated section:
  • 8 EMD GP38-3 drawings (FWWR 2000-2003)

2016-11-17

• Revised in Drawings/1:18 Undecorated section:
  • All GE ES40DC, ES44DC and ES44AC right-side views
    • Lowered latch on hood door below exhaust stack

2016-11-09

• Added in Drawings/1:18 Undecorated section:
  • 4 GE ES44AC drawings (CSXT versions)

2016-11-07

• Added in Drawings/1:18 Undecorated section:
  • 6 GE ES44AC drawings (BNSF Phase 1b through 1d versions)
• Revised in Drawings/1:18 Undecorated section:
  • GE ES44AC drawings (BNSF Phase 1f and 1g left-side views)
    • Added walkway box behind inverter cabinet
  • GE ES44AC drawings (NS versions)
    • Added missing grabiron on short hood

2016-11-06

• Revised in Drawings/1:18 Undecorated section:
  • GE ES40DC, ES44DC and ES44AC left-side views
    • Revised panel under cab on conductor's side (4 bolts at top on Phase 1f and later units)

2016-10-29

• Added in Photos section:
  • 23 photos from 2016-10-27 (CBNS)
  • 26 photos from 2016-10-26 (CBNS)
  • 41 photos from 2016-10-25 (CBNS)
  • 9 photos from 2016-10-24 (CBNS)
  • 63 photos from 2016-10-23 (CBNS)

2016-10-19

• Added in Drawings/1:18 Undecorated section:
  • 8 EMD SD40 drawings (GTW, LN and NW versions)
• Revised in Drawings/1:18 Undecorated section:
  • Some EMD GP38, GP38-2, GP40 and GP40-2 drawings (BN, DRGW and DTi versions)
    • Corrected Nathan M3 horn
  • EMD SD40 right-side views
    • Added missing lift ring at exhaust stack

2016-10-18

• Added in Drawings/1:18 Undecorated section:
  • 10 EMD GP40 drawings (DRGW and NW versions)

2016-10-17

• Added in Drawings/1:18 Undecorated section:
  • 4 EMD GP38 drawings (BN and MGA versions)
  • 10 EMD GP38AC drawings (LN, LV, NW and SLSF versions)
• Revised in Drawings/1:18 Undecorated section:
  • EMD GP38 drawings (with paper air filters and dynamic brakes)
    • Revised shape at front of dynamic brake housing

2016-10-16

• Added in Drawings/1:18 Undecorated section:
  • 6 EMD GP38 drawings (LN and MEC versions)
  • 12 EMD GP40 drawings (CBQ, DTI, IC Phase 1a3 and LN versions)
  • 2 GE ES44AC drawings (NS Phase 2c version)
• Revised in Drawings/1:18 Undecorated section:
  • EMD GP35 drawings (CBQ versions)
    • Changed horn to Leslie S-2M
  • EMD GP38 drawings (Phase 1 versions)
    • Removed duplicate MU hose connector
    • Added missing fan caps
  • EMD GP38 drawings (PRSL Phase 2a2 version)
    • Revised fuel tank location

2016-10-15

• Added in Drawings/1:18 Undecorated section:
  • 2 GE ES44AC drawings (NS Phase 2e version)
• Revised in Drawings/1:18 Undecorated section:
  • GE ES44AC left-side views
    • Corrected minor error in rear sand hose/motor cable overlap

2016-10-12

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD GP38 drawings (CRR version)
• Revised in Drawings/1:18 Undecorated section:
  • EMD GP38 and GP40 drawings (Phase 1 through Phase 2a2)
    • Fuel tank supports (Phase 1 units only)
    • Cab sub-base ribs (Except Phase 1a1 units)

2016-10-11

• Updated in Locomotive Phases section:
  • EMD GP38/GP40 phases
    • Converted phases to tabular format
    • Added minor details (fuel tank supports, Phase 2b+ cab sub-base ribs)

2016-10-10

• Revised in Drawings/1:18 Undecorated section:
  • All GE ES40DC drawings and most GE Dash 9-40CW drawings (NS 9129 and up)
    • Added cab signalling sensor behind steps
  • GE ES44DC and ES44AC right-side views (Phase 2d and 2e versions)
    • Corrected grills under radiator intakes
  • GE ES44AC left-side views
    • Added conduit for fuel cutoff switch

2016-10-09

• Added in Drawings/1:18 Undecorated section:
  • 6 EMD SD70ACe drawings (EMDX/KCS Phase 2f and UP Phase 2c versions)

2016-10-08

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD SD70ACe drawings (UP Phase 2d1 version)
• Added in Locomotive Dimensions page:
  • EMD SD70ACe dimensions
• Revised in Drawings/1:18 Undecorated section:
  • All EMD SD70M-2 and SD70ACe drawings
    • Added missing rear platform lights on the hood end
    • Center hood door height
    • Large rear hood intake height
    • Revised intake under radiators on conductor's side (CN Phase 2e2 and 2f SD70M-2)

2016-10-04

• Added in Drawings/1:18 Undecorated section:
  • 6 EMD SD70ACe drawings (NS versions)

2016-10-03

• Added in Drawings/1:18 Undecorated section:
  • 6 EMD SD70ACe drawings (NS and UP versions)
• Revised in Drawings/1:18 Undecorated section:
  • EMD SD70M-2 right-side views (CN Phase 2e2 and 2f versions)
    • cab sub-base door position
    • revised panel ahead of central air intake
    • notch above brake wheel (Phase 2f)

2016-09-23

• Added in Drawings/1:18 Undecorated section:
  • 4 EMD SD70M-2 drawings (CN Phase 2e versions)

2016-09-22

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD SD70M-2 drawings (CN Phase 2f version)
• Updated in Locomotive Phases section:
  • EMD SD70M-2/SD70ACe phases
    • Added introduction
    • Converted phases to tabular format
    • Added Phase 2e2

2016-07-30

• Added in Drawings/1:18 Undecorated section:
  • 4 EMD GP38 drawings (DTI versions)
  • 4 EMD GP38AC drawings (DTI versions)
• Revised in Drawings/1:18 Undecorated section:
  • Most EMD GP38 drawings
    • Revised fuel tank supports
    • Front traction motor cables (PC left-side views)

2016-07-09

• Added in Photos section:
  • 15 photos from 2016-07-04 (CP)
  • 96 photos from 2016-07-04 (CN)
  • 5 photos from 2016-07-01 (CP)
  • 112 photos from 2016-06-30 (CN)

2016-06-22

• Added in Photos section:
  • 49 photos from 2016-06-21 (SLR)

2016-06-15

• Major update in completed
• Completed re-sizing small versions of photos (in progress all days from June 11 to June 15)
• Added various photos from 1999 through 2005 (previously online but not listed in database, or missing photo files)

2016-06-11

• Major update in progress
• Changed method of displaying images in Photos section, using two image sizes instead of three
• Started re-sizing small versions of photos from maximum of 800 x 600 to maximum of 800 x 300, with EXIF data removed

2016-06-06

• Added in Photos section:
  • 83 photos from 2016-06-06 (SLR)

2016-05-09

• Added in Drawings/1:18 Undecorated section:
  • 2 GE C39-8E drawings (version with Rockwell trucks)
• Revised in Drawings/1:18 Undecorated section:
  • GE C39-8E drawings
    • Added missing front class lights

2016-04-29

• Added in Drawings/1:18 Undecorated section:
  • 6 EMD SD38-2 drawings (EJE versions)
• Revised in Drawings/1:18 Undecorated section:
  • EMD SD38-2 drawings
    • Added truck details behind steps (CNW and LN versions)
    • Revised rear section of dynamic brake housing (SLSF 296-297)

2016-04-23

• Added in Drawings/1:18 Undecorated section:
  • 4 EMD GP35 drawings (EMDX versions)

2016-04-20

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD SD38-2 drawings (LN version)

2016-04-19

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD SD38-2 drawings (CNW version)
  • 6 EMD SD40-2 drawings (CNW versions)
• Revised in Drawings/1:18 Undecorated section:
  • EMD SD40-2 drawings (SOU Phase 2a2 and later versions)
    • Corrected end handrail error from previous update

2016-04-18

• Added in Drawings/1:18 Undecorated section:
  • 4 EMD SD38-2 drawings (SLSF versions)

2016-04-15

• Revised in Drawings/1:18 Undecorated section:
  • EMD SD40-2 drawings (ATSF and BN versions)
    • Revised front class lights (no outer gasket)
    • Removed rear number boards and class lights (ATSF versions)

2016-04-14

• Major update completed
• Updated in Locomotive Phases section:
  • EMD SD40-2 phases
    • Added Phase 1b2, 1c1, 1c2, 2a1 and 2d2 (previous 2a1 through 2a3 are now 2a2 through 2a4)
    • Revised existing detail descriptions
• Revised in Drawings/1:18 Undecorated section:
  • All EMD SD40-2 drawings
    • Revised steps - redrawn steps with deeper angled sheet on Phase 2a2 and later units; minor step revisions on earlier units)
    • Revised jacking pads on some Phase 1a2 through 2a2 units (no casting hole)
    • Added round front platform lights (BN units)
    • Minor corrections to side sill, cab vent and short hood vent on isolated BN and RI units
    • Changed phases to reflect updated SD40-2 phases

2016-04-12

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD SD40-2 drawings (NW 6189-6207)

2016-04-09

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD SD40 drawings (BN version)
• Continued addition of 1:55 drawings to drawing search:
  • EMD SD45-2, SD45T-2 and SD45X drawings

2016-04-08

• Added in Drawings/1:18 Undecorated section:
  • 10 EMD SD40-2 drawings (SOU versions)

2016-04-07

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD GP50 drawings (SOU 7073-7092)
  • 3 EMD SD40-2 drawings (SOU Phase 1a versions)
• Revised in Drawings/1:18 Undecorated section:
  • EMD GP39X and GP50 drawings (SOU versions)
    • Added conductor's side short hood hatch
    • Added short hood flag brackets
    • Removed engineer's side fuel gauge (Phase 1a2 version) and short hood light
    • Revised end handrails

2016-03-29

• Revised in Drawings/1:18 Undecorated section:
  • GE ES44DC drawings (CSXT versions)
    • Revised cab side windows
    • Added grabirons to hood side of Phase 1e version

2016-03-04

• Added in Photos section:
  • 22 photos from 2016-03-03 (CMQ)

2016-03-03

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD SD38 drawings (PC version)
  • 2 EMD SD40 drawings (PC version)
• Revised in Drawings/1:18 Undecorated section:
  • All EMD GP38 drawings
    • Roof hatch around radiator fans
  • EMD SD40-2 drawings (NW versions)
    • Minor truck details

2016-03-01

• Added in Drawings/1:18 Painted section:
  • CEFX #2040 (EMD GP20D)
• Added in Drawings/1:18 Undecorated section:
  • 4 EMD GP18 drawings (BM versions)

2016-02-29

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD GP18 drawings (IC version)
• Revised in Drawings/1:18 Undecorated section:
  • Most EMD GP8, GP10 and GP11 drawings
    • Added hood grabiron behind cab on engineer's side (GP8, GP10)
    • Added pipe conduit behind cab on conductor's side (GP8, GP10)
    • Fewer bolts around radiator intake screens (late GP9 and GP18 rebuilds)

2016-02-28

• Revised in Drawings/1:18 Undecorated section:
  • EMD GP28 drawings
    • Revised cab awning (fabric instead of metal)
  • EMD GP30 drawings (UP versions only)
    • Revised cab mirrors, armrest and awning (fabric instead of metal)

2016-02-27

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD GP11 drawings (IC 8720)
• Revised in Drawings/1:18 Undecorated section:
  • EMD GP30 drawings
    • Corrected pilots, support plates and footboards (representing GP18-GP30 version rather than GP35 and later version)

2016-02-25

• Revised in Drawings/1:18 Undecorated section:
  • EMD GP35 drawings (GMO versions)
    • Revised horn
• Added in Photos section:
  • 6 photos from 2016-01-22 (CMQ)

2016-02-22

• Revised in Drawings/1:18 Undecorated section:
  • All MLW M-630 and M-636 drawings
    • Added minor truck casting details

2016-02-20

• Added in Drawings/1:18 Undecorated section:
  • 5 GE ES44AC drawings (BNSF versions)
• Revised in Drawings/1:18 Undecorated section:
  • All GE Dash 9 series, ES40DC and ES44DC drawings
    • Added traction pin in center of trucks

2016-02-19

• Added in Drawings/1:18 Undecorated section:
  • 18 EMD SD40-2 drawings (ATSF versions)
• Revised in Drawings/1:18 Undecorated section:
  • EMD SD40-2 drawings, SLSF version
    • Removed dynamic brake hatch batten strip

2016-02-18

• Added in Drawings/1:18 Undecorated section:
  • 8 EMD SD40-2 drawings (MKT versions)

2016-02-15

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD SD40-2 drawings (NW Phase 2a2 versions)
  • 4 GE ES44AC drawings (BNSF Phase 2c and 2d versions)
• Updated in Locomotive Phases section:
  • EMD/IC GP8 and GP10 phases
    • Changed order of roster sorted by phase (now also sorted by sub-phase details)
  • GE ES series phases
    • Converted to table format

2016-02-14

• Added in Drawings/1:18 Undecorated section:
  • 6 EMD SD40-2 drawings (NW versions)
  • 2 GE C39-8 drawings (NS Phase 1b versions)
• Revised in Drawings/1:18 Undecorated section:
  • All EMD and GMD SD40-2 and SD40-2(W) drawings
    • Corrected brake line on trucks (in front of truck chains, rather than behind)

2016-02-13

• Added in Drawings/1:18 Undecorated section:
  • 10 GE C39-8 drawings (NS versions)
• Updated in Locomotive Phases section:
  • EMD SD40-2 and GE C39-8 phases
    • Converted to table format

2016-02-11

• Added in Drawings/1:18 Undecorated section:
  • 2 GE C39-8E drawings
  • 11 GMD SD40-2 drawings (CP versions)

2016-02-10

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD GP40-2 drawings (RDG versions)

2016-02-08

• Added in Drawings/1:18 Undecorated section:
  • 8 GMD SD40-2 drawings (CP and ONT versions)
• Revised in Drawings/1:18 Undecorated section:
  • GMD GP30, GP35, GP38-2(W), GP40-2(W), GP40-2L(W) and SD40-2(W) drawings
    • Revised rear headlight housing contour

2016-02-06

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD GP20C-ECO drawings
  • 2 MLW M-630 drawings (as-modified versions with original air intakes)
  • 4 MLW M-636 drawings (as-modified versions with original air intakes or square air filters)
• Revised in Drawings/1:18 Undecorated section:
  • EMD GP15D and GP20D right-side views
    • Corrected speed recorder cable (GP15D)
    • Added missing cab door latch and hinges
  • GE Dash 9-40CW drawings (left-side views of NS 8889-9128)
    • Shortened rear-most hood intake under radiator intakes
  • MLW M-630, M-636 drawings (as-built versions)
    • Removed end drop steps

2016-01-12

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD GP15D drawings (CEFX version)
  • 2 EMD GP20D drawings

2016-01-09

• Added in Photos section:
  • 48 photos from 2016-01-09 (CMQ & SLR)
  • 2 photos from 2015-11-12 (CMQ)
  • 21 photos from 2015-10-30 (CMQ)
  • 8 photos from 2015-10-12 (CMQ)
  • 45 photos from 2015-09-22 (CMQ)
  • 25 photos from 2015-09-12 (SLR)
  • 3 photos from 2015-08-29 (SLR)

2016-01-05

• Added in Drawings/1:18 Undecorated section:
  • 2 GE C30-7 drawings (CR version)

2016-01-04

• Added in Drawings/1:18 Undecorated section:
  • 2 EMD SW1001 drawings (RDG version)