Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - EMD GP35

Selected scales:


1:18 Drawings

Model Built Phase Numbers Notes Last modified
EMD GP35
  
1964-03 -
1964-04
1a2 AA 385-390 Type B trucks; no dynamic brakes
2022-02-04Revision history:

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)

2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps

2021-02-09
- Added missing end transoms on trucks

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
EMD GP35
  
1964-05 -
1964-06
1b1 AA 391-394 Type B trucks; no dynamic brakes
2022-02-04Revision history:

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)

2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps

2021-02-09
- Added missing end transoms on trucks

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
EMD GP35
  
1963-10 1a1 ACL 909-915 No dynamic brakes
2022-02-04Revision history:

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
EMD GP35
  
1964-01 -
1964-02
1a1 ATSF 1300-1315
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-03 -
1964-06
1a2 ATSF 1316-1349
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
" 1b1 "
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1965-04 -
1965-05
1d ATSF 1350-1383
2022-03-02Revision history:

2018-11-11
- Revised blower duct (GP40-style: fewer bolts, edge seam)

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1965-06 -
1965-11
2b ATSF 1384-1460
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2019-08-07
- Corrected line/crop issue at right of image

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-03 -
1964-04
1a2 BO 3500-3519
2022-03-02Revision history:

2012-12-16
- Air reservoir size

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-05 -
1964-09
1b1 BO 3540-3559;
CO 3520-3539
2022-03-02Revision history:

2012-12-16
- Air reservoir size

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-09 -
1964-11
1b3 CO 3560-3575
2022-03-02Revision history:

2012-12-16
- Air reservoir size

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1965-09 -
1965-12
2b BO 3581; CO 3537:2, 3563:2, 3574:2, 3582-3584
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2019-08-07
- Corrected line/crop issue at right of image

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1963-12 1a1 CBQ 978-981
2022-03-02Revision history:

2012-12-16
- Air reservoir size

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2016-10-16
- Changed horn to Leslie S-2M

2017-09-03
- Changed cab light from Gyralite to Mars light
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-03 -
1964-04
1a2 CBQ 982-985
2022-03-02Revision history:

2012-12-16
- Air reservoir size

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2016-10-16
- Changed horn to Leslie S-2M

2017-09-03
- Changed cab light from Gyralite to Mars light
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-05 -
1964-08
1b1 CBQ 986-993
2022-03-02Revision history:

2012-12-16
- Air reservoir size

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2016-10-16
- Changed horn to Leslie S-2M

2017-09-03
- Changed cab light from Gyralite to Mars light
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
   
1964-08 -
1964-12
1b2, 1b3, 1b4 CBQ 994-996, 997-999
2022-03-02Revision history:

2012-12-16
- Air reservoir size

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2016-10-16
- Changed horn to Leslie S-2M

2017-09-03
- Changed cab light from Gyralite to Mars light
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-03 1a1 CEI 244
2023-10-25Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1964-03 1a2 CEI 242-243
2023-10-25Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1964-06 -
1964-07
1b1 CEI 245-254
2023-10-25Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1964-09 -
1964-11
1b3 CEI 255-264
2023-10-25Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1965-06 2b CEI 265-272
2023-10-25Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2019-08-07
- Corrected line/crop issue at right of image

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1964-02 1a1 CNW 824-825 No dynamic brakes
2022-03-21Revision history:

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-03 -
1964-04
1a2 CNW 826-833 No dynamic brakes
2022-03-21Revision history:

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
- Removed dynamic brakes (left-side view)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-04 1a2 CNW 834-843 No dynamic brakes
2022-03-21Revision history:

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-05 -
1964-06
1b1 DRGW 3029-3038
2022-02-04Revision history:

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2018-11-14
- Revised steps and pilots

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
EMD GP35
  
1964-12 -
1965-01
1b4 DRGW 3039-3047
2022-02-04Revision history:

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2018-11-14
- Revised steps and pilots

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
EMD GP35
  
1965-01 1c1 DRGW 3048-3050
2022-02-04Revision history:

2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)

2018-11-14
- Revised steps and pilots

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
EMD GP35
  
1964-01 -
1964-02
1a1 DTI 350-357 No dynamic brakes
2022-02-04Revision history:

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
EMD GP35
  
1964-09 1b1 EL 2551-2562
2022-03-02Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1965-08 -
1965-09
2b EL 2563-2586
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2019-08-07
- Corrected line/crop issue at right of image

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1963-07 -
1963-08
1a1 EMDX 5652, 5654
2022-03-02Revision history:

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-02 1a1 EMDX 5661 re# EMDX 1964
2022-03-02Revision history:

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-02 1a1 GMO 601-605 Type B Trucks
2022-03-02Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2014-11-27
- Revised trucks

2015-07-26
- Added missing fuel gauge (left side)

2016-02-25
- Revised horn

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps

2021-02-09
- Added missing end transoms on trucks

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-03 -
1964-04
1a2 GMO 606-612 Type B Trucks
2022-03-02Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2014-11-27
- Revised trucks

2015-07-26
- Added missing fuel gauge (left side)

2016-02-25
- Revised horn

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps

2021-02-09
- Added missing end transoms on trucks

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-08 -
1964-09
1b1 GMO 613-624 Type B Trucks
2022-03-02Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2014-11-27
- Revised trucks

2015-07-26
- Added missing fuel gauge (left side)

2016-02-25
- Revised horn

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps

2021-02-09
- Added missing end transoms on trucks

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
   
1965-01 -
1965-03
1c1, 1c2 GMO 625-636 Type B Trucks
2022-03-02Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2014-11-27
- Revised trucks

2015-07-26
- Added missing fuel gauge (left side)

2016-02-25
- Revised horn

2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps

2021-02-09
- Added missing end transoms on trucks

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1965-08 -
1965-09
2c GMO 637-648 Type B Trucks
2022-03-02Revision history:

2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)

2021-02-09
- Added missing end transoms on trucks

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-02 -
1964-05
1a2 LN 1100-1113 No dynamic brakes
2022-03-02Revision history:

2012-12-16
- Air reservoir size

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2017-01-04
- Removed hand brake (left side)

2017-10-07
- Removed hand brake chain (right side)
- Corrected minor line glitch on latches on first engine room door (right side)

2018-11-11
- Corrected minor line glitch on latches on first engine room door (left side)

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-11 1b4 LN 1114-1115 No dynamic brakes
2022-03-02Revision history:

2012-12-16
- Air reservoir size

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2017-01-04
- Removed hand brake (left side)

2017-10-07
- Removed hand brake chain (right side)
- Corrected minor line glitch on latches on first engine room door (right side)

2018-11-11
- Corrected minor line glitch on latches on first engine room door (left side)

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1963-12 -
1964-01
1a1 MP 600-624 No dynamic brakes
Post-delivery radiator screens
2022-03-02Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
- Removed end drop step and handrail chains

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
   
1965-01 -
1965-04
1c1, 1c2 MP 625-634, 635-649 No dynamic brakes
Post-delivery radiator screens
2022-03-02Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
- Removed end drop step and handrail chains
- Removed dynamic brakes (right-side views)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1963-11 -
1963-12
1a1 NW 200-214 High short hood
2022-03-02Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2017-05-16
- Added grabiron at top of short hood

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2019-08-10
- Corrected glitch in short hood headlight

2020-01-30
- Replaced all-weather cab window (as-modified) with standard window (as-built)
- Added awning

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-03 -
1964-04
1a2 NW 215-239 High short hood
2022-03-02Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2017-05-16
- Added grabiron at top of short hood

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2019-08-10
- Corrected glitch in short hood headlight

2020-01-30
- Replaced all-weather cab window (as-modified) with standard window (as-built)
- Added awning

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
   
1965-01 -
1965-03
1c1, 1c2 NW 1309-1328 High short hood
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2019-08-10
- Corrected glitch in short hood headlight

2020-01-30
- Replaced all-weather cab window (as-modified) with standard window (as-built)

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-05 -
1964-06
1b1 PRR 2252-2296
2022-03-02Revision history:

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2021-01-02
- Corrected mismatched front right handrail (right side)
- Added MU connector on end handrails

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-11 1b3 PRR 2297-2310 2309, 2310 re# 2250, 2251
2022-03-02Revision history:

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2021-01-02
- Corrected mismatched front right handrail (right side)
- Added MU connector on end handrails

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
   
1965-01 -
1965-04
1c1, 1c2 PRR 2311-2370 2369, 2370 re# 2309, 2310
2022-03-02Revision history:

2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2021-01-01
- Corrected mismatched front right handrail (right side)
- Added MU connector on end handrails

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1963-12 1a1 RDG 6501-6506 re# 3620-3625
2022-03-02Revision history:

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2018-11-15
- Corrected glitch in speed recorder cable

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1964-08 -
1964-09
1b1 RDG 3626-3655
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1965-05 1d RDG 3656
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1965-04 2a RI 300-304 No dynamic brakes
2023-10-25Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2019-08-07
- Corrected line/crop issue at right of image

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)

2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1965-05 -
1965-08
2b RI 305-333 No dynamic brakes
2023-10-25Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2019-08-07
- Corrected line/crop issue at right of image

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)

2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1965-04 2a SLSF 717-719
2022-03-02Revision history:

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1965-04 -
1965-12
2b SLSF 720-724, 732
2022-03-02Revision history:

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1965-12 2c SLSF 725-731 Type B trucks
2022-03-02Revision history:

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2020-12-28
- Brake chain bracket (left side)

2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)

2021-02-09
- Added missing end transoms on trucks

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1963-12 1a1 SOU 210-214 High short hood
Central of Georgia
2022-02-04Revision history:

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
EMD GP35
   
1964-12 -
1965-04
1c1, 1c2 SOU 2645-2702,
2705-2715
Type B Trucks; high short hood
2705-2715 Savannah & Atlanta
2022-02-04Revision history:

2021-02-09
- Added missing end transoms on trucks

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
EMD GP35
  
1965-02 1c1 SOU 2703-2704 High short hood
2022-02-04Revision history:

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
EMD GP35
  
1963-12 -
1964-02
1a1 SP 7408-7455;
SSW 760-763
re# SP 6520-6567,
SSW 6500-6503
2023-10-25Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1964-02 -
1964-03
1a2 SP 7456-7464 re# SP 6568-6576
2023-10-25Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1964-05 -
1964-06
1b1 SP 7465-7484 re# SP 6577-6596
2023-10-25Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1964-12 1b4 SP 7700-7712;
SSW 764-771
re# SP 6597-6609,
SSW 6504-6511
2023-10-25Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
   
1965-02 -
1965-03
1c1, 1c2 SP 7713-7720, 7721-7727;
SSW 772-775, 776-779
re# SP 6610-6617,
6618-6624,
SSW 6512-6515,
6516-6519
2023-10-25Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1965-04 -
1965-06
1c2 SP 7728-7761 re# SP 6625-6658
2023-10-25Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
" 1d " "
2023-10-25Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-01-18
- Added lift rings below radiator intakes

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1965-07 -
1965-11
2b SP 7762-7782;
SSW 780-781
re# SP 6659-6679,
SSW 6680-6681
2023-10-25Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2019-08-07
- Corrected line/crop issue at right of image

2020-01-18
- Added lift rings below radiator intakes
- Removed rear numberboards
- Added circular panels on long hood end

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape

2022-11-08
- Fuel filler

2023-10-25
- Nathan P-series horn dimensions
EMD GP35
  
1964-05 -
1964-07
1b1 UP 740-761
2022-03-02Revision history:

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2022-03-02
- Horn manifold and back cap dimensions
EMD GP35
  
1963-11 1a1 WP 3001-3010
2022-02-04Revision history:

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
EMD GP35
  
1964-11 1b4 WP 3011-3012
2022-02-04Revision history:

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
EMD GP35
  
1965-03 -
1965-04
1c2 WP 3013-3022
2022-02-04Revision history:

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

See also: