Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - EMD GP38

Selected scales:


1:18 Drawings

Model Built Phase Numbers Notes Last modified
EMD GP38
  
1970-06 2b ATSF 3500-3528
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1970-08 -
1970-09
2b ATSF 3529-3560
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1970-02 2b BN 2072-2077
2022-01-28Revision history:

2018-12-01
- Corrected minor line glitch on latches on first engine room door
- Revised step/corner handrail height

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
EMD GP38
  + 
1967-10 -
1967-12
2a1 BO 3800-3849;
CO 3850-3899
2022-03-02Revision history:

2012-12-16
- Revised air reservoir size

2014-10-23
- Truck shape and casting logos
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2016-03-03
- Roof hatch around radiator fans

2016-10-17 paper
- Revised shape at front of dynamic brake housing

2017-03-25
- Added circular panels on hood ends

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  + 
1970-07 -
1970-12
2b BO 4800-4819;
CO 4820-4829
2022-03-02Revision history:

2012-12-16
- Revised air reservoir size

2014-10-23
- Truck shape and casting logos
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2016-03-03
- Roof hatch around radiator fans

2016-10-17 paper
- Revised shape at front of dynamic brake housing

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1967-04 1a3 CRR 2000-2009
2022-03-02Revision history:

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1966-01 1a1 DTI 200-204
2022-02-04Revision history:

2016-10-17
- Removed duplicate MU hose connector
- Added missing fan caps
- Revised shape at front of dynamic brake housing

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
EMD GP38
  
1969-09 2b DTI 205-206
2022-01-28Revision history:

2016-10-17
- Revised shape at front of dynamic brake housing

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
EMD GP38
  
1969-08 2b GMO 701-720
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1970-06 -
1970-07
2b LN 4000-4019
2023-10-25Revision history:

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-10-25
- Nathan P-series horn dimensions
EMD GP38
  
1966-11 1a3 MEC 251-262
2022-03-02Revision history:

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1967-12 2a1 MEC 263
2022-03-02Revision history:

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1969-06 2b MGA 2000-2004
2022-03-02Revision history:

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1969-11 -
1969-12
2b MKT 300-303
2022-03-02Revision history:

2014-10-23
- Truck shape and casting logos
- Radiator fans (bottom rim edge and upper rim clips)

2016-03-03
- Roof hatch around radiator fans

2016-07-30
- Revised fuel tank supports

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1966-10 -
1967-06
1a3 MP 572-577 re# 852-857, 2002-2007;
577 may be Phase 1a4
2022-03-02Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1969-06 -
1969-07
2b PC 7675-7737
2022-03-02Revision history:

2016-03-03
- Roof hatch around radiator fans

2016-07-30
- Revised fuel tank supports
- Left-side front traction motor cables

2016-10-17
- Revised shape at front of dynamic brake housing

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2019-08-10
- Removed grabiron ahead of right-side battery box

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1969-08 -
1969-11
2b PC 7738-7814
2022-03-02Revision history:

2016-03-03
- Roof hatch around radiator fans

2016-07-30
- Revised fuel tank supports
- Left-side front traction motor cables

2016-10-17
- Revised shape at front of dynamic brake housing

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2019-08-10
- Removed grabiron ahead of right-side battery box

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1969-11 2b PC 7815-7824 extended cab
2022-03-02Revision history:

2016-03-03
- Roof hatch around radiator fans

2016-07-30
- Revised fuel tank supports
- Left-side front traction motor cables

2016-10-17
- Revised shape at front of dynamic brake housing

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2019-12-12
- Revised short hood grabiron location and cab roof profile

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1970-05 -
1971-02
2b PC 7825-7903
2022-03-02Revision history:

2016-03-03
- Roof hatch around radiator fans

2016-07-30
- Revised fuel tank supports
- Left-side front traction motor cables

2016-10-17
- Revised shape at front of dynamic brake housing

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2019-08-10
- Removed grabiron ahead of right-side battery box

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1970-08 -
1971-03
2b PC 7904-7907;
PRSL 2010-2014
extended cab
2022-03-02Revision history:

2015-10-14
- Revised fuel tank size

2016-03-03
- Roof hatch around radiator fans

2016-07-30
- Revised fuel tank supports
- Left-side front traction motor cables

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2019-12-12
- Revised short hood grabiron location and cab roof profile

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1971-02 -
1971-04
2b PC 7908-7939
2022-03-02Revision history:

2016-03-03
- Roof hatch around radiator fans

2016-07-30
- Revised fuel tank supports
- Left-side front traction motor cables

2016-10-17
- Revised shape at front of dynamic brake housing

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1967-12 2a1 PRSL 2000-2004 extended cab
2022-03-02Revision history:

2016-03-03
- Roof hatch around radiator fans

2016-07-30
- Revised fuel tank supports

2016-10-16
- Revised fuel tank location

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2019-12-12
- Revised short hood grabiron location and cab roof profile

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions
EMD GP38
  
1969-04 2b PRSL 2005-2009 extended cab
2022-03-02Revision history:

2016-03-03
- Roof hatch around radiator fans

2016-07-30
- Revised fuel tank supports

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2019-12-12
- Revised short hood grabiron location and cab roof profile

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-02
- Horn manifold and back cap dimensions

See also: