Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - EMD GP38-3

Selected scales:


1:18 Drawings

Model Built Phase Numbers Notes Last modified
EMD GP38-3
  
FWWR 2000 GP35 rebuild (nee DRGW 3038)
2023-12-28Revision history:

2019-07-23
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Corrected minor line glitch on latches on first engine room door

2020-12-09
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-02-08
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-12-28
- Nathan P-series horn dimensions
EMD GP38-3
  
FWWR 2001 GP35 rebuild (nee DRGW 3050)
2023-12-28Revision history:

2019-07-23
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Corrected minor line glitch on latches on first engine room door

2020-12-09
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-02-08
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-12-28
- Nathan P-series horn dimensions
EMD GP38-3
  
FWWR 2002 GP35 rebuild (nee DRGW 3035)
2023-12-28Revision history:

2019-07-23
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Corrected minor line glitch on latches on first engine room door

2020-12-09
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-02-08
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-12-28
- Nathan P-series horn dimensions
EMD GP38-3
  
FWWR 2003 GP35 rebuild (nee SP 7753)
2023-12-28Revision history:

2019-07-23
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Corrected minor line glitch on latches on first engine room door

2020-12-09
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)

2022-02-08
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts

2023-12-28
- Nathan P-series horn dimensions
EMD GP38-3
  
FWWR 2004-2005 GP38 rebuild (nee PC 7922, 7696)
2022-03-03Revision history:

2019-07-23
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Corrected minor line glitch on latches on first engine room door
- Revised radiator intake grills and roof fan hatch
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward

2020-12-09
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank

2021-01-09
- Fuel tank height and gap from underframe

2022-02-08
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-03-03
- Horn manifold and back cap dimensions
EMD GP38-3
  
2004-02 (R) 1 NS 5801 NS GP50 rebuild
2023-12-28Revision history:

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door

2020-12-11
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)

2021-01-12
- Fuel tank height and gap from underframe

2022-11-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-12-21
- End handrail height

2023-12-28
- Nathan P-series horn dimensions
EMD GP38-3
  
2004-06 -
2005-06 (R)
2 NS 5802-5808, 5811-5813 "
2022-12-21Revision history:

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door

2020-12-11
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)

2021-01-12
- Fuel tank height and gap from underframe

2022-11-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-12-21
- End handrail height
EMD GP38-3
  
2004-12 -
2005-06 (R)
" NS 5809-5810, 5814 "
2022-12-21Revision history:

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door

2020-12-11
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)

2021-01-12
- Fuel tank height and gap from underframe

2022-11-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-12-21
- End handrail height
EMD GP38-3
  
2005-07 -
2005-09 (R)
3 NS 5815-5817, 5819 "
2022-12-21Revision history:

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door

2020-12-11
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)

2021-01-12
- Fuel tank height and gap from underframe

2022-11-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-12-21
- End handrail height
EMD GP38-3
  
2005-09 (R) " NS 5818 "
2023-12-28Revision history:

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door

2020-12-11
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)

2021-01-12
- Fuel tank height and gap from underframe

2022-11-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-12-21
- End handrail height

2023-12-28
- Nathan P-series horn dimensions
EMD GP38-3
  
2006-11 -
2006-12 (R)
4 NS 5820, 5823 "
2022-12-21Revision history:

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door

2020-12-11
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)

2021-01-12
- Fuel tank height and gap from underframe

2022-11-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-12-21
- End handrail height
EMD GP38-3
  
2006-12 (R) " NS 5821 "
2022-12-21Revision history:

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door

2020-12-11
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)

2021-01-12
- Fuel tank height and gap from underframe

2022-11-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-12-21
- End handrail height
EMD GP38-3
  
2006-12 (R) " NS 5822 "
2022-12-21Revision history:

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door

2020-12-11
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)

2021-01-12
- Fuel tank height and gap from underframe

2022-11-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-12-21
- End handrail height
EMD GP38-3
  
2006-12 -
2007-01 (R)
" NS 5824-5829 "
2022-12-21Revision history:

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door

2020-12-11
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)

2021-01-12
- Fuel tank height and gap from underframe

2022-11-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-12-21
- End handrail height
EMD GP38-3
  
2007-02 -
2007-04 (R)
5 NS 5830-5834, 5836-5837 "
2022-12-21Revision history:

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door

2020-12-11
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)

2021-01-12
- Fuel tank height and gap from underframe

2022-11-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-12-21
- End handrail height
EMD GP38-3
  
2007-03 (R) " NS 5835 "
2022-12-21Revision history:

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door

2020-12-11
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)

2021-01-12
- Fuel tank height and gap from underframe

2022-11-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-12-21
- End handrail height

See also: