Model
| Built
| Phase
| Numbers
| Qty
| Notes
| Last modified
|
EMD SD45-2 ← →
| 1972-05
|
| ATSF 5625-5646, 5648-5656
| 31
|
| 2023-01-09Revision history:
2020-12-22
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-20
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
- Horn manifold and back cap dimensions
2023-01-09
- Long hood end seams
|
|
EMD SD45-2 ← →
| "
|
| ATSF 5647, 5657-5661
| 6
|
| 2023-01-09Revision history:
2020-12-22
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-20
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
- Horn manifold and back cap dimensions
2023-01-09
- Long hood end seams
|
|
EMD SD45-2 ← →
| 1973-05 - 1973-06
|
| ATSF 5662-5704
| 43
|
| 2023-01-09Revision history:
2020-12-22
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-20
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
- Horn manifold and back cap dimensions
2023-01-09
- Long hood end seams
|
|
EMD SD45-2 ← →
| 1974-05
|
| ATSF 5705, 5708-5711
| 5
|
| 2023-01-09Revision history:
2023-01-09
- Long hood end seams
|
|
EMD SD45-2 ← →
| 1974-05
|
| ATSF 5706-5707, 5712-5714
| 5
|
| 2023-01-09Revision history:
2023-01-09
- Long hood end seams
|
|
EMD SD45-2 ← →
| 1972-11 - 1974-02
|
| CRR 3607-3624
| 18
|
| 2023-01-09Revision history:
2014-02-17
- Truck shape and casting logo
2014-10-22
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
2017-11-11
- Revised central hood door spacing
2019-07-24
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle hood doors narrowed by 0.5"
- Rear hood seam and doors moved rearward by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack and dynamic brake taper
2019-08-07
- Changed center axle shock strut to earlier version
2020-12-22
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-20
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
- Horn manifold and back cap dimensions
2023-01-09
- Long hood end seams
|
|
EMD SD45-2 ← →
| 1974-08 - 1974-09
|
| SCL 2045-2059
| 15
|
| 2023-01-09Revision history:
2014-02-17
- Truck shape and casting logo
2014-10-22
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
2017-11-11
- Revised central hood door spacing
2019-07-24
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle hood doors narrowed by 0.5"
- Rear hood seam and doors moved rearward by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack and dynamic brake taper
2019-08-07
- Changed center axle shock strut to earlier version
2020-12-22
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-20
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
- Horn manifold and back cap dimensions
2023-01-09
- Long hood end seams
|
|