Undecorated Drawings - EMD SD60M
| Selected scales: |
1:18 Drawings
| Model | Built | Phase | Numbers | Notes | Last modified |
|---|---|---|---|---|---|
| EMD SD60M ← → | 1989-12 - 1990-03 | 1c | BN 9200-9249 | Equipped for fuel tender | 2023-01-19Revision history:
2020-01-05 - Revised center hood door spacing - Increased height of walkway blower duct and bottom of hood doors 2020-11-28 - Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5") - Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2021-01-10 - Fuel tank length, height and gap from underframe 2022-12-12 - Coupler cut levers - Corner handrail end plate attachment points 2023-01-19 - Hood door and radiator intake height - Reversed orientation of radiator intakes (left side) |
| EMD SD60M ← → | " | " | " | As modified; strobe lights later replaced with ditch lights | 2023-01-19Revision history:
2020-01-05 - Revised center hood door spacing - Increased height of walkway blower duct and bottom of hood doors 2020-11-28 - Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5") - Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2021-01-10 - Fuel tank length, height and gap from underframe 2022-12-12 - Coupler cut levers - Corner handrail end plate attachment points 2023-01-19 - Hood door and radiator intake height - Reversed orientation of radiator intakes (left side) |
| EMD SD60M ← → | 1991-01 - 1991-03 | 2a | BN 1991, 9250-9298 | 2023-01-19Revision history:
2020-01-05 - Revised center hood door spacing - Increased height of walkway blower duct and bottom of hood doors 2020-11-28 - Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5") - Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised anticlimber supports - Revised radiator fan dimensions and spacing 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2021-01-10 - Fuel tank length, height and gap from underframe 2022-12-12 - Coupler cut levers - Corner handrail end plate attachment points 2023-01-19 - Hood door and radiator intake height - Reversed orientation of radiator intakes (left side) | |
| EMD SD60M ← → | 1992-12 - 1993-01 | 2c | CR 5500-5514 | 2023-01-19Revision history:
2017-12-22 - Added circular hatches to long hood end 2020-01-05 - Revised center hood door spacing - Increased height of walkway blower duct and bottom of hood doors 2020-11-28 - Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5") - Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised anticlimber supports - Revised radiator fan dimensions and spacing - Changed radiator fans to later Q-type 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2021-01-10 - Fuel tank length, height and gap from underframe 2022-12-12 - Coupler cut levers - Corner handrail end plate attachment points - Horn manifold and back cap dimensions 2023-01-19 - Hood door and radiator intake height - Reversed orientation of radiator intakes (left side) | |
| EMD SD60M ← → | 1993-01 - 1993-06 | 2c | CR 5515-5543, 5545-5575 | 2023-01-19Revision history:
2017-12-22 - Added circular hatches to long hood end 2020-01-05 - Revised center hood door spacing - Increased height of walkway blower duct and bottom of hood doors 2020-11-28 - Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5") - Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised anticlimber supports - Revised radiator fan dimensions and spacing - Changed radiator fans to later Q-type 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2021-01-10 - Fuel tank length, height and gap from underframe 2022-12-12 - Coupler cut levers - Corner handrail end plate attachment points - Horn manifold and back cap dimensions 2023-01-19 - Hood door and radiator intake height | |
| EMD SD60M ← → | 1990-09 - 1990-12 | 1d | UP 6216-6268 | 2023-01-19Revision history:
2020-11-28 - Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5") - Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" - Revised rooftop access panels over engine compartment 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised anticlimber supports - Revised radiator fan dimensions and spacing 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2020-12-08 - Removed rear numberboards 2021-01-10 - Fuel tank length, height and gap from underframe 2022-12-12 - Coupler cut levers - Corner handrail end plate attachment points - Horn manifold and back cap dimensions 2023-01-19 - Hood door and radiator intake height - Reversed orientation of radiator intakes (left side) | |
| EMD SD60M ← → | 1991-11 - 1992-03 | 2b | UP 6269-6315 | 2023-01-19Revision history:
2020-11-28 - Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5") - Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised anticlimber supports - Revised radiator fan dimensions and spacing - Revised headlight housing 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2020-12-08 - Removed rear numberboards 2021-01-10 - Fuel tank length, height and gap from underframe 2022-12-12 - Coupler cut levers - Corner handrail end plate attachment points - Horn manifold and back cap dimensions 2023-01-19 - Hood door and radiator intake height - Reversed orientation of radiator intakes (left side) | |
| EMD SD60M ← → | 1992-10 | 2b | UP 6316-6365 | 2023-01-19Revision history:
2020-11-28 - Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5") - Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised anticlimber supports - Revised radiator fan dimensions and spacing - Revised headlight housing 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2020-12-08 - Removed rear numberboards 2021-01-10 - Fuel tank length, height and gap from underframe 2022-12-12 - Coupler cut levers - Corner handrail end plate attachment points - Horn manifold and back cap dimensions 2023-01-19 - Hood door and radiator intake height - Reversed orientation of radiator intakes (left side) |
1:55 Drawings
| Model | Phase | Numbers | Notes | Accuracy |
|---|---|---|---|---|
| EMD SD60M ← → | 1c | BN 9200-9249 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD60M ← → | 2a | BN 1991, 9250-9298 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD60M ← → | 2c | CR 5500-5514 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD60M ← → | 2c | CR 5515-5543, 5545-5575 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD60M ← → | 1b | SOO 6058-6062 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD60M ← ← → | 1a, 1b | UP 6085-6109, 6110-6215 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD60M ← → | 1d | UP 6216-6268 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD60M ← → | 2b | UP 6269-6365 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
See also: