Model
| Built
| Phase
| Numbers
| Qty
| Notes
| Last modified
|
EMD SD60M ← →
| 1989-12 - 1990-03
| 1c
| BN 9200-9249
| 50
| Equipped for fuel tender
| 2023-01-19Revision history:
2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
2020-11-28
- Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5")
- Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2021-01-10
- Fuel tank length, height and gap from underframe
2022-12-12
- Coupler cut levers
- Corner handrail end plate attachment points
2023-01-19
- Hood door and radiator intake height
- Reversed orientation of radiator intakes (left side)
|
|
EMD SD60M ← →
| "
| "
| "
| "
| As modified; strobe lights later replaced with ditch lights
| 2023-01-19Revision history:
2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
2020-11-28
- Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5")
- Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2021-01-10
- Fuel tank length, height and gap from underframe
2022-12-12
- Coupler cut levers
- Corner handrail end plate attachment points
2023-01-19
- Hood door and radiator intake height
- Reversed orientation of radiator intakes (left side)
|
|
EMD SD60M ← →
| 1991-01 - 1991-03
| 2a
| BN 1991, 9250-9298
| 50
|
| 2023-01-19Revision history:
2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
2020-11-28
- Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5")
- Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised anticlimber supports
- Revised radiator fan dimensions and spacing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2021-01-10
- Fuel tank length, height and gap from underframe
2022-12-12
- Coupler cut levers
- Corner handrail end plate attachment points
2023-01-19
- Hood door and radiator intake height
- Reversed orientation of radiator intakes (left side)
|
|
EMD SD60M ← →
| 1992-12 - 1993-01
| 2c
| CR 5500-5514
| 15
|
| 2023-01-19Revision history:
2017-12-22
- Added circular hatches to long hood end
2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
2020-11-28
- Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5")
- Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised anticlimber supports
- Revised radiator fan dimensions and spacing
- Changed radiator fans to later Q-type
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2021-01-10
- Fuel tank length, height and gap from underframe
2022-12-12
- Coupler cut levers
- Corner handrail end plate attachment points
- Horn manifold and back cap dimensions
2023-01-19
- Hood door and radiator intake height
- Reversed orientation of radiator intakes (left side)
|
|
EMD SD60M ← →
| 1993-01 - 1993-06
| 2c
| CR 5515-5543, 5545-5575
| 60
|
| 2023-01-19Revision history:
2017-12-22
- Added circular hatches to long hood end
2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
2020-11-28
- Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5")
- Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised anticlimber supports
- Revised radiator fan dimensions and spacing
- Changed radiator fans to later Q-type
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2021-01-10
- Fuel tank length, height and gap from underframe
2022-12-12
- Coupler cut levers
- Corner handrail end plate attachment points
- Horn manifold and back cap dimensions
2023-01-19
- Hood door and radiator intake height
|
|
EMD SD60M ← →
| 1990-09 - 1990-12
| 1d
| UP 6216-6268
| 53
|
| 2023-01-19Revision history:
2020-11-28
- Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5")
- Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
- Revised rooftop access panels over engine compartment
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised anticlimber supports
- Revised radiator fan dimensions and spacing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2020-12-08
- Removed rear numberboards
2021-01-10
- Fuel tank length, height and gap from underframe
2022-12-12
- Coupler cut levers
- Corner handrail end plate attachment points
- Horn manifold and back cap dimensions
2023-01-19
- Hood door and radiator intake height
- Reversed orientation of radiator intakes (left side)
|
|
EMD SD60M ← →
| 1991-11 - 1992-03
| 2b
| UP 6269-6315
| 47
|
| 2023-01-19Revision history:
2020-11-28
- Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5")
- Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised anticlimber supports
- Revised radiator fan dimensions and spacing
- Revised headlight housing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2020-12-08
- Removed rear numberboards
2021-01-10
- Fuel tank length, height and gap from underframe
2022-12-12
- Coupler cut levers
- Corner handrail end plate attachment points
- Horn manifold and back cap dimensions
2023-01-19
- Hood door and radiator intake height
- Reversed orientation of radiator intakes (left side)
|
|
EMD SD60M ← →
| 1992-10
| 2b
| UP 6316-6365
| 50
|
| 2023-01-19Revision history:
2020-11-28
- Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5")
- Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised anticlimber supports
- Revised radiator fan dimensions and spacing
- Revised headlight housing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2020-12-08
- Removed rear numberboards
2021-01-10
- Fuel tank length, height and gap from underframe
2022-12-12
- Coupler cut levers
- Corner handrail end plate attachment points
- Horn manifold and back cap dimensions
2023-01-19
- Hood door and radiator intake height
- Reversed orientation of radiator intakes (left side)
|
|