Model
| Built
| Phase
| Numbers
| Qty
| Notes
| Last modified
|
GE AC4400CW ← →
| 1999-09
| 2a1
| BNSF 5600-5602
|
|
| 2022-11-11Revision history:
2017-02-05
- Shorter rearmost hood door intake (left side)
2017-02-08
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added missing truck brake piping (left side)
- Added X-panel under central air intake (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-01-05
- Added numberboard latches
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← →
| 2003-04 - 2004-04
| 2c
| BNSF 5603-5717, 5838-5840
|
|
| 2022-11-11Revision history:
2017-02-05
- Shorter rearmost hood door intake (left side)
2017-02-08
- Added empty handbrake chain bracket to front right truck
2020-10-20
- Added missing truck brake piping (left side)
- Added X-panel under central air intake (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-01-05
- Added numberboard latches
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← →
| 2001-11 - 2001-12
| 2a2
| CEFX 1001-1025
|
| Similar to UP specs
| 2022-11-11Revision history:
2017-02-08
- Added empty handbrake chain bracket to front right truck (right side)
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added missing truck brake piping (left side)
- Added X-panel under central air intake (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-01-05
- Added numberboard latches
2022-11-11
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← →
| 2004-09 - 2004-11
| 2c
| CEFX 1026-1059
|
| Similar to CP specs
| 2022-11-14Revision history:
2017-02-08
- Added empty handbrake chain bracket to front right truck (right side)
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2017-09-20
- Added grabiron behind cab (left side)
2020-10-20
- Added missing truck brake piping (left side)
- Added X-panel under central air intake (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
2022-11-14
- Narrower steps
- Added step light behind battery boxes (right side)
|
|
GE AC4400CW ← →
| 1994-11 - 1994-12
| 1a2
| CNW 8801-8835
|
|
| 2022-11-11Revision history:
2017-02-08
- Narrower 2 rear intakes on conductor's side below radiators
- Removed truck yaw dampers and brackets
- Revised front traction motor cable bracket (behind where front yaw damper was located)
- Corrected underframe line behind front fuel filler (right side)
- Removed electronic fuel gauge and relocated fuel cut-off switch
- Added light under cab
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Revised truck brake piping
- Reversed orientation of truck brake hose (right-side view)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← ← →
| 1995-08 - 1995-10
| 1a3, 1a4
| CP 9500-9543, 9544-9582
|
|
| 2022-11-11Revision history:
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← ← →
| 1997-09 - 1998-12
| 1f, 1g1
| CP 8500-8580, 9583-9683
|
|
| 2022-11-14Revision history:
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
2022-11-14
- Narrower steps
- Added step light behind battery boxes (right side)
|
|
GE AC4400CW ← ← →
| 2001-09 - 2003-01
| 2a2, 2b
| CP 8600-8655, 9700-9740
|
|
| 2022-11-14Revision history:
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
2022-11-14
- Narrower steps
- Added step light behind battery boxes (right side)
|
|
GE AC4400CW ← →
| 2003-07 - 2003-09
| 2c
| CP 9750-9784
|
|
| 2022-11-14Revision history:
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
2022-11-14
- Narrower steps
- Added step light behind battery boxes (right side)
|
|
GE AC4400CW ← →
| 2004-04 - 2004-06
| 2c
| CP 9800-9840
|
|
| 2022-11-14Revision history:
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
2022-11-14
- Narrower steps
- Added step light behind battery boxes (right side)
|
|
GE AC4400CW ← →
| 2002-03 - 2002-09
| 2b
| CSXT 547-599, 5101-5122
|
|
| 2022-11-11Revision history:
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added X-panel under central air intake (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height
|
|
GE AC4400CW ← → →
| 1998-05 - 1999-06
| 1g1, 1g2
| FXE 4500-4527; TFM 2600-2649
|
|
| 2022-11-11Revision history:
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added sideframe holes below cab sub-base
- Corrected handrail around inverter cabinet
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← →
| 1999-06 - 2000-11
| 2a1
| FSRR 4400-4414; FXE 4528-4549; TFM 2650-2674
|
|
| 2022-11-11Revision history:
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added X-panel under central air intake (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← ← →
| 2003-06 - 2004-12
| 2c
| FSRR 4415-4429, 4430-4437; FXE 4550-4574
|
|
| 2022-11-11Revision history:
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added X-panel under central air intake (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← →
| 1999-11 - 1999-12
| 2a1
| KCS 2000-2049
|
|
| 2022-11-11Revision history:
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added X-panel under central air intake (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-01-05
- Added numberboard latches
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← ← ← →
| 1995-04 - 1995-10
| 1a3, 1a4
| SP 100-300, 301-352, 353-378
|
|
| 2022-11-11Revision history:
2017-02-08
- Narrower 2 rear intakes on conductor's side below radiators
- Removed truck yaw dampers and brackets
- Revised front traction motor cable bracket (behind where front yaw damper was located)
- Corrected underframe line behind front fuel filler (right-side view)
- Added empty handbrake chain bracket to front right truck (all versions with Hi-Ad trucks)
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Revised truck brake piping
- Reversed orientation of truck brake hose (right-side view)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-01-05
- Added numberboard latches
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← →
| 1994-08
| 1a1
| UP 9997-9999
|
| re# 6700-6702
| 2022-11-11Revision history:
2020-10-20
- Revised truck brake piping
- Reversed orientation of truck brake hose (right-side view)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
GE AC4400CW ← →
| 1995-10 - 1995-11
| 1b
| UP 6838-6866
|
|
| 2022-11-11Revision history:
2017-02-08
- Narrower 2 rear intakes on conductor's side below radiators
- Removed truck yaw dampers and brackets
- Revised front traction motor cable bracket
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Revised truck brake piping
- Reversed orientation of truck brake hose (right-side view)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
GE AC4400CW ← →
| 1995-11
| 1c1
| UP 6867-6884
|
|
| 2022-11-11Revision history:
2017-02-08
- Narrower 2 rear intakes on conductor's side below radiators
- Removed truck yaw dampers and brackets
- Revised front traction motor cable bracket (behind where front yaw damper was located)
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Revised truck brake piping
- Reversed orientation of truck brake hose (right-side view)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
GE AC4400CW ← →
| 1995-11
| 1c1
| UP 6885-6887
|
| Built with self-steering trucks; later equipped with Hi-Ad trucks (same as UP 6867-6884)
| 2022-11-11Revision history:
2017-02-08
- Narrower 2 rear intakes on conductor's side below radiators
- Removed truck yaw dampers and brackets
- Revised front traction motor cable bracket (behind where front yaw damper was located)
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
GE AC4400CW ← →
| 1996-03 - 1996-06
| 1c2
| UP 6738-6837
|
|
| 2022-11-11Revision history:
2017-02-08
- Narrower 2 rear intakes on conductor's side below radiators
- Removed truck yaw dampers and brackets
- Revised front traction motor cable bracket (behind where front yaw damper was located)
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Revised truck brake piping
- Reversed orientation of truck brake hose (right-side view)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
GE AC4400CW ← → → →
| 1997-03 - 1997-06
| 1d, 1e1
| GECX 4000-4009; UP 6550-6565, 6566-6624, 6625-6635
|
| UP 6635 had rearward left cab vent as on Phase 1e2 and later units
| 2022-11-11Revision history:
2017-02-08
- Narrower 2 rear intakes on conductor's side below radiators
- Removed truck yaw dampers (but with brackets installed)
- Revised front traction motor cable bracket (behind where front yaw damper was located)
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added missing truck brake piping (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← →
| 1997-06 - 1997-08
| 1e2
| UP 6636-6699
|
|
| 2022-11-11Revision history:
2017-02-08
- Narrower 2 rear intakes on conductor's side below radiators
- Removed truck yaw dampers (but with brackets installed)
- Revised front traction motor cable bracket (behind where front yaw damper was located)
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added missing truck brake piping (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← →
| 1997-10 - 1997-12
| 1e2
| UP 7080-7100
|
|
| 2022-11-11Revision history:
2017-02-08
- Narrower 2 rear intakes on conductor's side below radiators
- Removed truck yaw dampers (but with brackets installed)
- Revised front traction motor cable bracket (behind where front yaw damper was located)
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added missing truck brake piping (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← →
| 1998-06 - 1998-08
| 1g1
| UP 7101-7137
|
|
| 2022-11-11Revision history:
2017-02-08
- Removed truck yaw dampers (but with brackets installed)
- Revised front traction motor cable bracket (behind where front yaw damper was located)
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added missing truck brake piping (left side)
- Added sideframe holes below cab sub-base
- Corrected handrail around inverter cabinet
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-11
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← → →
| 1999-04 - 1999-08
| 1g2
| UP 7143-7191, 7192-7244
|
|
| 2022-11-11Revision history:
2017-02-08
- Removed truck yaw dampers (but with brackets installed)
- Revised front traction motor cable bracket (behind where front yaw damper was located)
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added missing truck brake piping (left side)
- Added sideframe holes below cab sub-base
- Corrected handrail around inverter cabinet
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-01-05
- Added numberboard latches
2022-11-11
- Removed numberboard hinges
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← → →
| 1999-03 - 2000-11
| 2a1
| UP 6430-6549, 6995-6999, 7138-7142, 7245-7297
|
|
| 2022-11-11Revision history:
2017-02-08
- Removed truck yaw dampers (but with brackets installed)
- Revised front traction motor cable bracket (behind where front yaw damper was located)
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added missing truck brake piping (left side)
- Added X-panel under central air intake (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-01-05
- Added numberboard latches
2022-11-11
- Removed numberboard hinges
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← ← →
| 2001-01 - 2002-02
| 2a2
| UP 5700-5809, 5811-5813
|
|
| 2022-11-11Revision history:
2017-02-08
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added missing truck brake piping (left side)
- Added X-panel under central air intake (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-01-05
- Added numberboard latches
2022-11-11
- Removed numberboard hinges
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← →
| 2001-02 - 2002-12
| 2b
| UP 5810, 5814-5913
|
| Plate between air reservoirs present on late Phase 2a2 units
| 2022-11-11Revision history:
2017-02-08
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added missing truck brake piping (left side)
- Added X-panel under central air intake (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-01-05
- Added numberboard latches
2022-11-11
- Removed numberboard hinges
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE AC4400CW ← ← →
| 2003-01 - 2004-12
| 2c
| UP 5554-5694, 5914-5981, 5982-6081
|
|
| 2022-11-11Revision history:
2017-02-08
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side)
2020-10-20
- Added missing truck brake piping (left side)
- Added X-panel under central air intake (left side)
- Added sideframe holes below cab sub-base
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-01-05
- Added numberboard latches
2022-11-11
- Removed numberboard hinges
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|