Drawings > Undecorated Drawings - By Type > GE B30-7
Undecorated Drawings - GE B30-7
| Selected scales: |
1:18 Drawings
| Model | Built | Phase | Numbers | Qty | Notes | Last modified |
|---|---|---|---|---|---|---|
| GE B30-7 ← → | 1978-05 | 1b | CO 8235-8244 | 10 | 2022-08-02Revision history:
2018-11-21 - Revised air reservoir height and brackets - Changed air reservoir brackets to early style with vertical C-channel supports - Relocated rear traction motor cables closer to fuel tank 2019-08-12 - Corrected line glitch on left front/right rear axles (exposed axle caps only) - Removed stray pixel from #2 axle (left side) 2020-02-11 - Revised air filter behind fuel tank (right side view) 2021-01-05 - Increased corner handrail thickness 2021-01-23 - Relocated fuel cutoff switch to within side sill 2021-02-11 - Pipe behind rear truck - Added sloped plate under frame behind draft gear - Fuel filler - Added safety valve to front air reservoir (left side) - Longer handrail stanchion in front of cab (right side) - Removed end fuel gauge from rear of fuel tank 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets | |
| GE B30-7 ← → | 1979-02 | 1d | CO 8245-8254 | 10 | 2022-08-02Revision history:
2018-11-21 - Revised air reservoir height and brackets - Changed air reservoir brackets to early style with vertical C-channel supports - Relocated rear traction motor cables closer to fuel tank 2020-02-11 - Revised air filter behind fuel tank (right side view) 2021-01-05 - Increased corner handrail thickness 2021-01-23 - Added missing section of sand line nozzle on rear truck (left side) 2021-02-11 - Pipe behind rear truck - Added sloped plate under frame behind draft gear - Added missing end transoms on trucks - Fuel filler - Added safety valve to front air reservoir (left side) - Longer handrail stanchion in front of cab (right side) - Removed end fuel gauge from rear of fuel tank 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets | |
| GE B30-7 ← → | 1979-06 | 2b | CO 8255-8264 | 10 | 2022-08-02Revision history:
2018-11-21 - Revised air reservoir height and brackets 2020-02-11 - Revised air filter behind fuel tank (right side view) 2021-01-05 - Increased corner handrail thickness 2021-01-23 - Added missing section of sand line nozzle on rear truck (left side) 2021-02-11 - Pipe behind rear truck - Added sloped plate under frame behind draft gear - Added missing end transoms on trucks - Fuel filler - Added safety valve to front air reservoir (left side) - Longer handrail stanchion in front of cab (right side) - Removed end fuel gauge from rear of fuel tank 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets | |
| GE B30-7 ← → | 1980-01 | 2c | CO 8265-8278 | 14 | 2022-08-02Revision history:
2018-11-21 - Revised air reservoir height and brackets 2020-02-11 - Revised air filter behind fuel tank (right side view) 2021-01-05 - Increased corner handrail thickness 2021-01-23 - Added missing section of sand line nozzle on rear truck (left side) 2021-02-11 - Pipe behind rear truck - Added sloped plate under frame behind draft gear - Rear headlight and numberboards - Added missing end transoms on trucks - Fuel filler - Added safety valve to front air reservoir (left side) - Longer handrail stanchion in front of cab (right side) - Removed end fuel gauge from rear of fuel tank 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets | |
| GE B30-7 ← → | 1981-03 - 1981-05 | 3a | CO 8279-8298 | 20 | 2023-11-11Revision history:
2018-11-21 - Revised air reservoir height and brackets 2020-02-11 - Revised air filter behind fuel tank (right side view) 2021-01-05 - Increased corner handrail thickness 2021-01-23 - Added missing section of sand line nozzle on rear truck (left side) 2021-02-11 - Added sloped plate under frame behind draft gear - Rear headlight and numberboards - Added missing end transoms on trucks - Fuel filler - Added safety valve to front air reservoir (left side) - Longer handrail stanchion in front of cab (right side) - Added notch and square hole at top of bolted strip above door behind cab - Revised seams under door behind cab - Removed end fuel gauge from rear of fuel tank 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Removed extra cab side windows 2023-11-11 - Increased underframe height | |
| GE B30-7 ← → | 1980-03 | 2c | SCL 5500-5509 | 10 | 2023-02-18Revision history:
2018-01-19 - Added missing section of panel near front steps 2018-11-21 - Revised air reservoir height and brackets - Added end-mounted fuel gauge on fuel tank 2021-01-05 - Increased corner handrail thickness 2021-02-11 - Pipe behind rear truck - Added sloped plate under frame behind draft gear - Rear headlight and numberboards - Fuel filler - Added safety valve to front air reservoir (left side) - Small pipe clips above fuel tank (right side) - Longer handrail stanchion in front of cab (right side) 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Horn manifold and back cap dimensions 2023-02-18 - Bottom taper on stairwell side sheet | |
| GE B30-7 ← → | 1980-05 | 2d | SCL 5510-5516 | 7 | 2023-02-18Revision history:
2018-01-19 - Added missing section of panel near front steps 2018-11-21 - Revised air reservoir height and brackets - Added end-mounted fuel gauge on fuel tank 2021-01-05 - Increased corner handrail thickness 2021-02-11 - Pipe behind rear truck - Added sloped plate under frame behind draft gear - Rear headlight and numberboards - Fuel filler - Added safety valve to front air reservoir (left side) - Small pipe clips above fuel tank (right side) - Longer handrail stanchion in front of cab (right side) 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Horn manifold and back cap dimensions 2023-02-18 - Bottom taper on stairwell side sheet | |
| GE B30-7 ← → | 1977-12 | 1a | SLSF 863-870 | 8 | 2022-08-02Revision history:
2018-01-15 - Minor correction to sand line above right rear truck - Removed speed recorder from #3 axle 2018-11-21 - Revised air reservoir height and brackets - Changed air reservoir brackets to early style with vertical C-channel supports - Relocated rear traction motor cables closer to fuel tank - Added end-mounted fuel gauge on fuel tank 2020-02-11 - Revised air filter behind fuel tank (right side view) 2020-11-18 - Revised horn 2021-01-05 - Increased corner handrail thickness 2021-02-11 - Pipe behind rear truck - Added missing end transoms on trucks - Fuel filler - Added safety valve to front air reservoir (left side) - Small pipe clips above fuel tank (right side) - Longer handrail stanchion in front of cab (right side) 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Horn manifold and back cap dimensions | |
| GE B30-7 ← → | 1978-01 - 1978-04 | 1a | SP 7800-7823 | 24 | 2023-11-12 | |
| GE B30-7 ← → | 1979-02 - 1979-03 | 1d | SP 7824-7853 | 30 | 2023-11-12 | |
| GE B30-7 ← → | 1979-03 - 1979-05 | 2b | SP 7854-7883 | 30 | 2023-11-12 | |
| GE B30-7 ← → | 1980-01 - 1980-04 | 2c | SSW 7770-7799 | 30 | 7700-7773 were early B36-7's | 2023-11-11 |
1:36 Drawings
| Model | Built | Phase | Numbers | Notes |
|---|---|---|---|---|
| GE B30-7 ← → | 1978-05 | 1b | CO 8235-8244 | |
| GE B30-7 ← → | 1979-02 | 1d | CO 8245-8254 | |
| GE B30-7 ← → | 1979-06 | 2b | CO 8255-8264 | |
| GE B30-7 ← → | 1980-01 | 2c | CO 8265-8278 | |
| GE B30-7 ← → | 1978-01 - 1978-04 | 1a | SP 7800-7823 | |
| GE B30-7 ← → | 1979-02 - 1979-05 | 1d | SP 7824-7853 | |
| GE B30-7 ← → | 1979-02 - 1979-05 | 2b | SP 7854-7883 | |
1:55 Drawings
| Model | Phase | Numbers | Notes | Accuracy |
|---|---|---|---|---|
| GE B30-7 ← → | 1b | CO 8235-8244 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| GE B30-7 ← → | 1d | CO 8245-8254 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| GE B30-7 ← → | 2b | CO 8255-8264 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| GE B30-7 ← → | 2c | CO 8265-8278 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| GE B30-7 ← → | 3a | CO 8279-8298 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| GE B30-7 ← → | 2c | SCL 5500-5516 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| GE B30-7 ← → | 2b | SP 7854-7883 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| GE B30-7 ← → | 2c | SSW 7774-7799 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
See also: