Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - GE C30-7

Selected scales:


1:18 Drawings

Model Built Phase Numbers Notes Last modified
GE C30-7
  
1977-12 -
1978-06
1a ATSF 8010-8057 Hyatt wheel bearings shown;
Timken bearings (as on later units) on approx. 8048+
2022-08-03Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank

2018-12-01
- Corrected height of wheel bearings
- Removed brake lever pins from truck sideframe

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
GE C30-7
  
1978-10 1b ATSF 8058-8063
2022-08-03Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank

2018-12-01
- Removed brake lever pins from truck sideframe

2019-12-27
- Revised fuel cutoff switch housing

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
GE C30-7
  
1979-04 -
1979-05
1c ATSF 8064-8098 Adirondack trucks
2022-08-03Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2018-12-01
- Removed brake lever pins from truck sideframe

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
GE C30-7
  
" " " Rockwell trucks
2022-08-03Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2018-12-01
- Removed brake lever pins from truck sideframe

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
GE C30-7
  
1980-05 -
1980-06
2b ATSF 8099-8122 Adirondack trucks
2022-08-03Revision history:

2018-12-01
- Removed brake lever pins from truck sideframe

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
" " " Rockwell trucks
2022-08-03Revision history:

2018-12-01
- Removed brake lever pins from truck sideframe

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
1981-05 2c ATSF 8123-8132, 8134, 8136 Adirondack trucks
2022-08-03Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2018-11-30
- Removed front louvers from right-side cab sub-base

2018-12-01
- Removed brake lever pins from truck sideframe

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler cutout in side frame
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
" " " Rockwell trucks
2022-08-03Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2018-11-30
- Removed front louvers from right-side cab sub-base

2018-12-01
- Removed brake lever pins from truck sideframe

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler cutout in side frame
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
1981-06 2c ATSF 8133, 8135, 8137-8152 Adirondack trucks
Locotrol-equipped
2022-08-03Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2018-12-01
- Removed brake lever pins from truck sideframe

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler cutout in side frame
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
" " " Rockwell trucks
Locotrol-equipped
2022-08-03Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2018-12-01
- Removed brake lever pins from truck sideframe

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler cutout in side frame
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
1983-01 2e ATSF 8153-8166 Adirondack trucks
2022-08-03Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2018-12-01
- Removed brake lever pins from truck sideframe

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Corrected sand line glitch behind front truck (right side)
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab
- Added drip rail over door behind cab

2021-02-15
- Added missing section of pipe for handbrake chain (right side)
- Added missing section of inner sand line brackets (under #3 and #4 axles) (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
" " " Rockwell trucks
2022-08-03Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2018-12-01
- Removed brake lever pins from truck sideframe

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Corrected sand line glitch behind front truck (right side)
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab
- Added drip rail over door behind cab

2021-02-15
- Added missing section of pipe for handbrake chain (right side)
- Added missing section of inner sand line brackets (under #3 and #4 axles) (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
1976-09 -
1977-12
1a BN 5500-5544 Adirondack trucks
A small minority had Rockwell trucks
2022-08-03Revision history:

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
GE C30-7
  
1978-09 -
1979-02
1b BN 5545-5581 Adirondack trucks
5567-5581 had lower fuel cutoff switch (as on later units)
2022-08-03Revision history:

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
GE C30-7
  
" " " Rockwell trucks
2022-08-03Revision history:

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
GE C30-7
  
1979-06 -
1979-11
1c BN 5000-5046, 5582-5599 Adirondack trucks
2022-08-03Revision history:

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
GE C30-7
  
" " " Rockwell trucks
2022-08-03Revision history:

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
GE C30-7
  
1980-02 -
1980-07
2a BN 5047-5126 Adirondack trucks
2022-08-03Revision history:

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing rear class lights (left side)
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
GE C30-7
  
" " " Rockwell trucks
2022-08-03Revision history:

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing rear class lights (left side)
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
GE C30-7
  
1981-03 -
1981-06
2c BN 5127-5141 Adirondack trucks
2022-08-03Revision history:

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab

2021-02-15
- Added missing rear class lights (left side)
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
GE C30-7
  
" " " Rockwell trucks
2022-08-03Revision history:

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab

2021-02-15
- Added missing rear class lights (left side)
- Added missing section of pipe for handbrake chain (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
GE C30-7
  
1977-11 1a CR 6600-6609
2022-08-03Revision history:

2016-12-30
- Added flange lubricators
- Corrected front left truck brake line
- Added missing right rear air pipe vent valve
- Revised top corner steps

2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank

2020-11-18
- Revised horn

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
GE C30-7
  
1979-02 1b (F.L.)
LN 7000-7015
Adirondack trucks
2023-02-18Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank

2020-11-18
- Revised horn

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions

2023-02-18
- Bottom taper on stairwell side sheet
GE C30-7
  
" " " Rockwell trucks
2023-02-18Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank

2020-11-18
- Revised horn

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions

2023-02-18
- Bottom taper on stairwell side sheet
GE C30-7
  
1979-03 1b (F.L.)
SCL 7016-7024
Adirondack trucks
2023-02-18Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank

2020-11-18
- Revised horn

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions

2023-02-18
- Bottom taper on stairwell side sheet
GE C30-7
  
" " " Rockwell trucks
2023-02-18Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank

2020-11-18
- Revised horn

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions

2023-02-18
- Bottom taper on stairwell side sheet
GE C30-7
  
1979-08 1c (F.L.)
SCL 7025-7031
2023-02-18Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2021-01-04
- Increased corner handrail thickness

2021-01-27
- Removed partial valve from air line behind front steps

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions

2023-02-18
- Bottom taper on stairwell side sheet
GE C30-7
  
1979-09 1c (F.L.)
LN 7032-7051
2023-02-18Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2021-01-04
- Increased corner handrail thickness

2021-01-27
- Removed partial valve from air line behind front steps

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions

2023-02-18
- Bottom taper on stairwell side sheet
GE C30-7
  
1980-03 2a (F.L.)
SCL 7052-7061
2023-02-18Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2021-01-04
- Increased corner handrail thickness

2021-01-27
- Removed partial valve from air line behind front steps

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions

2023-02-18
- Bottom taper on stairwell side sheet
GE C30-7
  
1980-07 2b (F.L.)
LN 7062-7069
2023-02-18Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2021-01-04
- Increased corner handrail thickness

2021-01-27
- Removed partial valve from air line behind front steps

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions

2023-02-18
- Bottom taper on stairwell side sheet
GE C30-7
  
1981-10 2c (F.L.)
SCL 7070-7094
2023-02-18Revision history:

2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank

2020-11-18
- Revised horn

2021-01-04
- Increased corner handrail thickness

2021-01-27
- Removed partial valve from air line behind front steps

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions

2023-02-18
- Bottom taper on stairwell side sheet
GE C30-7
  
1979-09 -
1979-11
1c NdeM 6701-6729 Export (Mexico)
2022-08-03Revision history:

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
GE C30-7
  
1979-11 -
1981-01
2a NdeM 6730-6799, 9600-9646 Export (Mexico)
2022-08-03Revision history:

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
GE C30-7
  
1981-04 -
1981-08
2c FCP 434-455; NdeM 9647-9652 Export (Mexico)
2022-08-03Revision history:

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
1982-01 -
1982-02
2c some of NdeM 11001-11028 Export (Mexico)
2022-08-03Revision history:

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
1982-01 -
1982-03
2d some of NdeM 11001-11028; 11029-11039 Export (Mexico)
2022-08-03Revision history:

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
1982-06 -
1985-01
2e NdeM 11040-11128 Export (Mexico)
2022-08-03Revision history:

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
1986-05 -
1986-07
2f FCP 456-459; NdeM 11129-11148 Export (Mexico)
2022-08-03Revision history:

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
GE C30-7
  
1978-11 -
1978-12
1b NW 8003-8037
2022-08-03Revision history:

2020-11-18
- Revised horn

2021-01-04
- Increased corner handrail thickness

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
GE C30-7
  
1979-07 -
1979-10
1c NW 8038-8082
2022-08-03Revision history:

2021-01-04
- Increased corner handrail thickness

2021-01-29
- Added pipe in front of fuel tank (right side)

2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)

2021-02-15
- Added missing rear class lights (left side)

2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions

1:55 Drawings

Model Phase Numbers Notes Accuracy
GE C30-7
  
1 BN 5500-5599, 5000-5046 Adirondack FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
" " Rockwell FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
2a BN 5047-5126 Adirondack FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
" " Rockwell FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
2c BN 5127-5141 Adirondack FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
" " Rockwell FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
1 CR 6600-6609
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
1 (F.L.)
LN 7000-7015
Adirondack FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
" " Rockwell FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
1 (F.L.)
SCL 7016-7031
Adirondack FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
" " Rockwell FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
1 (F.L.)
LN 7032-7051
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
2a (F.L.)
SCL 7052-7061
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
   
2b, 2c (F.L.)
LN 7062-7069;
SCL 7070-7094
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
1 NW 8003-8082
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
1 UP 2400-2429
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
1 UP 2430-2459 Adirondack FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
" " Rockwell FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
2a UP 2460-2499 Adirondack FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
" " Rockwell FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
2b UP 2500-2539 Adirondack FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
" " Rockwell FB-3 trucks
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)

See also: