Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - GE Dash 9-40CW

Selected scales:


1:18 Drawings

Model Built Phase Numbers Notes Last modified
GE Dash 9-40CW
  
1996-01 -
1996-02
2a NS 8889-8931
2022-11-12Revision history:

2016-02-06
- Shortened rear-most hood intake under radiator intakes

2016-02-20
- Added traction pin in center of trucks

2017-01-30 (8889 only)
- Added angled panel behind right-side radiator intake

2017-01-23
- Piping behind fuel tank

2017-01-25
- Revised cab side window size and location (slightly taller, moved slightly upward)

2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2018-12-28
- Corrected underframe line glitch above fuel gauge

2019-10-03
- Revised rear ditch lights

2020-10-20
- Revised truck brake piping
- Reversed orientation of truck brake hose (right-side)

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-12
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height
GE Dash 9-40CW
   
1996-02 -
1996-04
2a NS 8932-8947, 8948-9008
2022-11-12Revision history:

2016-02-06
- Shortened rear-most hood intake under radiator intakes

2016-02-20
- Added traction pin in center of trucks

2017-01-23
- Piping behind fuel tank

2017-01-25
- Revised cab side window size and location (slightly taller, moved slightly upward)

2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2018-12-28 (8889-9128)
- Corrected underframe line glitch above fuel gauge

2019-10-03
- Revised rear ditch lights

2020-10-20
- Revised truck brake piping
- Reversed orientation of truck brake hose (right-side)

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-12
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height
GE Dash 9-40CW
  
1997-02 -
1997-05
2a NS 9009-9128
2022-11-12Revision history:

2016-02-06
- Shortened rear-most hood intake under radiator intakes

2016-02-20
- Added traction pin in center of trucks

2017-01-23
- Piping behind fuel tank

2017-01-25
- Revised cab side window size and location (slightly taller, moved slightly upward)

2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2018-12-28
- Corrected underframe line glitch above fuel gauge

2019-10-03
- Revised rear ditch lights

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-12
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height
GE Dash 9-40CW
    
1998-02 -
1998-10
2c1, 2c2, 2d NS 9129-9154, 9155-9169, 9170-9258
2022-11-12Revision history:

2016-02-20
- Added traction pin in center of trucks

2016-10-09
- Added cab signalling sensor behind steps

2017-01-23
- Fuel tank seam
- Piping behind fuel tank

2017-01-25
- Revised cab side window size and location (slightly taller, moved slightly upward)

2017-02-08
- Corrected location of hinges on first 2 hood doors under front air intake (left side)

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2019-10-03
- Revised rear ditch lights

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-12
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height
GE Dash 9-40CW
  
1998-10 2d NS 9259-9264
2022-11-12Revision history:

2016-02-20
- Added traction pin in center of trucks

2016-10-09
- Added cab signalling sensor behind steps

2017-01-23
- Fuel tank seam
- Piping behind fuel tank

2017-01-25
- Revised cab side window size and location (slightly taller, moved slightly upward)

2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2019-10-03
- Revised rear ditch lights

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-12
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height
GE Dash 9-40CW
  
1999-02- 2000-03 2f NS 9265-9441
2022-11-12Revision history:

2016-02-20
- Added traction pin in center of trucks

2016-10-09
- Added cab signalling sensor behind steps

2017-01-23
- Fuel tank seam
- Piping behind fuel tank

2017-01-25
- Revised cab side window size and location (slightly taller, moved slightly upward)

2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2019-10-03
- Revised rear ditch lights

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-12
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height
GE Dash 9-40CW
   
2000-03 -
2000-05
2f NS 9442-9529, 9530-9534
2022-11-12Revision history:

2016-02-20
- Added traction pin in center of trucks

2016-10-09
- Added cab signalling sensor behind steps

2017-01-23
- Fuel tank seam
- Piping behind fuel tank

2017-01-25
- Revised cab side window size and location (slightly taller, moved slightly upward)

2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2019-10-03
- Revised rear ditch lights

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-12
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height
GE Dash 9-40CW
  
2000-12 -
2001-12
2g NS 9535-9719
2022-11-12Revision history:

2016-02-20
- Added traction pin in center of trucks

2016-10-09
- Added cab signalling sensor behind steps

2017-01-23
- Fuel tank seam
- Piping behind fuel tank

2017-01-25
- Revised cab side window size and location (slightly taller, moved slightly upward)

2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2019-10-03
- Revised rear ditch lights

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-12
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height
GE Dash 9-40CW
  
2001-12 2g NS 9720-9744
2022-11-12Revision history:

2016-02-20
- Added traction pin in center of trucks

2016-10-09
- Added cab signalling sensor behind steps

2017-01-23
- Fuel tank seam
- Piping behind fuel tank

2017-01-25
- Revised cab side window size and location (slightly taller, moved slightly upward)

2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2019-10-03
- Revised rear ditch lights

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-12
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height
GE Dash 9-40CW
   
2003-01 -
2004-03
2h NS 9745-9811, 9812-9841
2022-11-12Revision history:

2016-02-20
- Added traction pin in center of trucks

2016-10-09
- Added cab signalling sensor behind steps

2017-01-23
- Fuel tank seam
- Piping behind fuel tank

2017-01-25
- Revised cab side window size and location (slightly taller, moved slightly upward)

2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2019-10-03
- Revised rear ditch lights

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-12
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height
GE Dash 9-40CW
  
2004-03 -
2004-05
2h NS 9842-9886
2022-11-12Revision history:

2016-02-20
- Added traction pin in center of trucks

2016-10-09
- Added cab signalling sensor behind steps

2017-01-23
- Piping behind fuel tank

2017-01-25
- Revised cab side window size and location (slightly taller, moved slightly upward)

2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2019-10-03
- Revised rear ditch lights

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-12
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height
GE Dash 9-40CW
  
2004-09 -
2004-12
2h NS 9887-9978
2022-11-12Revision history:

2016-02-20
- Added traction pin in center of trucks

2016-10-09
- Added cab signalling sensor behind steps

2017-01-23
- Piping behind fuel tank

2017-01-25
- Revised cab side window size and location (slightly taller, moved slightly upward)

2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2019-10-03
- Revised rear ditch lights

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-12
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height

See also: