Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - GMD GP38-2(W)

Selected scales:


See the GP38-2 Phases for phase descriptions.

1:18 Drawings

Model Built Phase Numbers Notes Last modified
GMD GP38-2(W)
  
1973-06 CN 5560; re# 4760 builder's plate: GP38-2
2021-01-11Revision history:

2013-01-05
- Cab handrail attachments

2014-10-19
- Added rerail frogs
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)

2016-02-08
- Revised rear headlight housing contour

2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- Revised paper air filter housing

2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)

2021-01-11
- Fuel tank height and gap from underframe
GMD GP38-2(W)
  
" CN 4760 " (as modified)
2021-01-11Revision history:

2013-01-05
- Cab handrail attachments

2014-10-19
- Added coupler knuckle bracket (rear pilot)
- Added oil retention tank (behind fuel tank)
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)

2016-02-08
- Revised rear headlight housing contour

2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- Revised paper air filter housing

2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)

2021-01-11
- Fuel tank height and gap from underframe
GMD GP38-2(W)
  
1973-10 -
1974-01
CN 5561-5610;
re# 4761-4810
builder's plate: GP38-2
2021-01-11Revision history:

2013-01-05
- Cab handrail attachments

2014-10-19
- Added rerail frogs
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)

2016-02-08
- Revised rear headlight housing contour

2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- Revised paper air filter housing

2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)

2021-01-11
- Fuel tank height and gap from underframe
GMD GP38-2(W)
  
" CN 4761-4810 " (as modified)
single plow
2021-01-11Revision history:

2013-01-05
- Cab handrail attachments

2014-10-19
- Added coupler knuckle bracket (rear pilot)
- Added oil retention tank (behind fuel tank)
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)

2016-02-08
- Revised rear headlight housing contour

2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- Revised paper air filter housing

2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)

2021-01-11
- Fuel tank height and gap from underframe
GMD GP38-2(W)
  
" " " (as modified)
dual plows
2021-01-11Revision history:

2013-01-05
- Cab handrail attachments

2014-10-19
- Added coupler knuckle bracket (rear pilot)
- Added oil retention tank (behind fuel tank)
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)

2016-02-08
- Revised rear headlight housing contour

2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- Revised paper air filter housing

2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)

2021-01-11
- Fuel tank height and gap from underframe