Drawings > Undecorated Drawings - By Type > GMD GP38-2(W)
Undecorated Drawings - GMD GP38-2(W)
Selected scales: |
1:18 Drawings
Model | Built | Phase | Numbers | Qty | Notes | Last modified |
---|---|---|---|---|---|---|
GMD GP38-2(W) ← → | 1973-06 | CN 5560 re# 4760 | 1 | builder's plate: GP38-2 | 2023-01-09Revision history:
2013-01-05 - Cab handrail attachments 2014-10-19 - Added rerail frogs - Corrected rear pilot handrail (stanchions flush on pilot) - Corrected right side handrail (angled section at cab) - Revised radiator fans (bottom rim edge and upper rim clips) 2016-02-08 - Revised rear headlight housing contour 2019-01-25 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised roof fan hatch - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward - Corrected minor line glitch on latches on cab sub-base door and first engine room door - Revised paper air filter housing 2020-12-10 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-11 - Fuel tank height and gap from underframe 2022-12-01 - Coupler cut levers - Corner handrail end plate / stairwell attachment points 2023-01-09 - Long hood end seams | |
GMD GP38-2(W) ← → | " | " | " | " (as modified) | 2023-01-09Revision history:
2013-01-05 - Cab handrail attachments 2014-10-19 - Added coupler knuckle bracket (rear pilot) - Added oil retention tank (behind fuel tank) - Corrected rear pilot handrail (stanchions flush on pilot) - Corrected right side handrail (angled section at cab) - Revised radiator fans (bottom rim edge and upper rim clips) 2016-02-08 - Revised rear headlight housing contour 2019-01-25 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised roof fan hatch - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward - Corrected minor line glitch on latches on cab sub-base door and first engine room door - Revised paper air filter housing 2020-12-10 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-11 - Fuel tank height and gap from underframe 2022-12-01 - Coupler cut levers - Corner handrail end plate / stairwell attachment points 2023-01-09 - Long hood end seams | |
GMD GP38-2(W) ← → | 1973-10 - 1974-01 | CN 5561-5610 re# 4761-4810 | 50 | builder's plate: GP38-2 | 2023-01-09Revision history:
2013-01-05 - Cab handrail attachments 2014-10-19 - Added rerail frogs - Corrected rear pilot handrail (stanchions flush on pilot) - Corrected right side handrail (angled section at cab) - Revised radiator fans (bottom rim edge and upper rim clips) 2016-02-08 - Revised rear headlight housing contour 2019-01-25 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised roof fan hatch - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward - Corrected minor line glitch on latches on cab sub-base door and first engine room door - Revised paper air filter housing 2020-12-10 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-11 - Fuel tank height and gap from underframe 2022-12-01 - Coupler cut levers - Corner handrail end plate / stairwell attachment points 2023-01-09 - Long hood end seams | |
GMD GP38-2(W) ← → | " | " | " | " (as modified) single plow | 2023-01-09Revision history:
2013-01-05 - Cab handrail attachments 2014-10-19 - Added coupler knuckle bracket (rear pilot) - Added oil retention tank (behind fuel tank) - Corrected rear pilot handrail (stanchions flush on pilot) - Corrected right side handrail (angled section at cab) - Revised radiator fans (bottom rim edge and upper rim clips) 2016-02-08 - Revised rear headlight housing contour 2019-01-25 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised roof fan hatch - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward - Corrected minor line glitch on latches on cab sub-base door and first engine room door - Revised paper air filter housing 2020-12-10 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-11 - Fuel tank height and gap from underframe 2022-12-01 - Coupler cut levers - Corner handrail end plate / stairwell attachment points 2023-01-09 - Long hood end seams | |
GMD GP38-2(W) ← → | " | " | " | " (as modified) dual plows | 2023-01-09Revision history:
2013-01-05 - Cab handrail attachments 2014-10-19 - Added coupler knuckle bracket (rear pilot) - Added oil retention tank (behind fuel tank) - Corrected rear pilot handrail (stanchions flush on pilot) - Corrected right side handrail (angled section at cab) - Revised radiator fans (bottom rim edge and upper rim clips) 2016-02-08 - Revised rear headlight housing contour 2019-01-25 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised roof fan hatch - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward - Corrected minor line glitch on latches on cab sub-base door and first engine room door - Revised paper air filter housing 2020-12-10 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-11 - Fuel tank height and gap from underframe 2022-12-01 - Coupler cut levers - Corner handrail end plate / stairwell attachment points 2023-01-09 - Long hood end seams | |
1:36 Drawings
Model | Built | Phase | Numbers | Notes |
---|---|---|---|---|
GMD GP38-2(W) ← → | 1973-06 | CN 5560; re# 4760 | builder's plate: GP38-2 | |
GMD GP38-2(W) ← → | " | CN 4760 | " (as modified) | |
GMD GP38-2(W) ← → | 1973-10 - 1974-01 | CN 5561-5610; re# 4761-4810 | builder's plate: GP38-2 | |
GMD GP38-2(W) ← → | " | CN 4761-4810 | " (as modified) single plow | |
GMD GP38-2(W) ← → | " | " | " (as modified) dual plows | |
1:55 Drawings
Model | Phase | Numbers | Notes | Accuracy |
---|---|---|---|---|
GMD GP38-2(W) ← → | CN 5560-5610 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
GMD GP38-2(W) ← → | CN 4760-4810; ex-5560-5610 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
See also: