Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - BN

Selected Scales: 1:181:361:55

See the Locomotive Phases section for phase descriptions.

1:18 Drawings

Number of Drawings: 91

Model Built Phase Numbers Notes Last modified
EMD GP38
  
1970-02 2b BN 2072-2077
2019-01-24Revision history:

2018-12-01
- Corrected minor line glitch on latches on first engine room door
- Revised step/corner handrail height

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell
EMD GP38-2
  
1972-05 1a BN 2078-2087
2019-01-24Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2017-09-27
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Revised radiator intake grills and roof fan hatch

2019-01-24
- Fuel tank moved 2.5" rearward
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
EMD GP38-2
  
1974-11 1b2 BN 2088-2109
2019-01-24Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2015-03-29
- Inertial air intakes (revised upper/lower ridge detail)

2017-09-27
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Revised roof fan hatch

2019-01-24
- Fuel tank moved 2.5" rearward
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
EMD GP50
  
1980-12 1a2 BN 3100-3109 Ordered as SLSF 790-799
2019-08-10Revision history:

2013-01-25
- Central air intake, dynamic brake housing (right side)

2013-03-05
- Corner handrails, pilot braces, rear end plate
- Traction motor cables

2014-02-17
- Truck shape and casting logo

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2015-08-19
- Air reservoir piping (left side)

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
EMD GP50
  
1985-06 -
1985-11
2b BN 3110-3157 Equipped for fuel tender
2019-08-10Revision history:

2013-01-25
- Central air intake, dynamic brake housing (right side)

2013-03-05
- Corner handrails, pilot braces, rear end plate
- Traction motor cables

2014-02-17
- Truck shape and casting logo

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2015-08-19
- Air reservoir piping (left side)

2015-08-25
- Revised end handrails above anticlimber (center stanchions moved in from the end, modified stanchion/chain support)

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
EMD GP50L
  
1985-11 2b BN 3158-3162 Equipped for fuel tender
2019-08-06Revision history:

2013-01-25
- Central air intake, dynamic brake housing (right side)

2013-03-05
- Corner handrails, pilot braces, rear end plate
- Traction motor cables

2014-02-17
- Truck shape and casting logo

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2015-08-19
- Air reservoir piping (left side)

2015-08-25
- Revised end handrails above anticlimber (center stanchions moved in from the end, modified stanchion/chain support)

2019-08-06
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
EMD SD40
  
1971-10 -
1971-11
2c BN 6300-6324
2019-08-10Revision history:

2017-03-19
- Added cab door stops

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake fans
- Removed extra bolt on exhaust stack housing

2018-02-25
- Removed ballast plate above fuel tank

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Relocated dynamic brakes
- Revised exhaust stack

2019-08-10
- Added missing grabiron ahead of right-side battery box
EMD SD40-2
  
1972-01 -
1972-03
1a1 BN 6325-6339;
CS 900-917
BN 6335-6339 re# 6912-6916;
CS 900-917 re# 6348:2-6365:2
2019-01-23Revision history:

2016-04-14
- Revised steps
- Added round front platform lights

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Corrected minor line glitch on latches on first engine room door
- Revised exhaust stack
EMD SD40-2
  
1973-03 -
1973-12
1a2 BN 6340-6375, 6824-6836, 6917-6928 Locotrol-equipped
BN 6340-6363 re# 6800-6823
BN 6364-6375 re# 6900-6911
2019-01-23Revision history:

2016-04-14
- Revised steps
- Added round front platform lights

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Corrected minor line glitch on latches on first engine room door
- Revised exhaust stack
EMD SD40-2
  
1974-02 -
1974-05
1a2 BN 6376-6385;
CS 918-925, 980, 996
CS 918-925 re# 6366:2-6373:2
CS 980, 996 re# 6850, 6950
2019-01-23Revision history:

2016-04-14
- Revised steps
- Added round front platform lights

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Corrected minor line glitch on latches on first engine room door
- Revised exhaust stack
EMD SD40-2
  
1974-11 -
1974-12
1a2 BN 6700-6707;
CS 950-959
CS 950-959 re# 7820-7829
2019-01-23Revision history:

2016-04-14
- Revised steps
- Added round front platform lights

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Corrected minor line glitch on latches on first engine room door
- Revised exhaust stack
EMD SD40-2
  
1976-02 -
1976-03
1c1 BN 6708-6752
2019-01-23Revision history:

2016-04-14
- Revised steps
- Revised jacking pads (no casting hole)
- Added round front platform lights

2017-09-26
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
EMD SD40-2
  
1976-02 -
1976-03
2a1 BN 6753-6772
2019-01-23Revision history:

2016-04-14
- Revised steps
- Revised jacking pads (no casting hole)
- Added round front platform lights

2017-09-26
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
EMD SD40-2
  
1977-05 -
1977-06
2a2 BN 6773-6780, 8000-8009;
CS 930-949, 960, 961
CS 930-949 re# 7800-7819
CS 960, 961 re# 7830, 7831
2019-01-23Revision history:

2015-08-25
- Revised end handrails above anticlimber (center stanchions moved in from the end)

2016-04-14
- Revised steps - redrawn steps with deeper angled sheet
- Revised jacking pads (no casting hole)
- Added round front platform lights

2017-09-26
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
EMD SD40-2
  
1977-11 -
1977-12
2a2 BN 6781-6799, 7000-7028
2019-01-23Revision history:

2015-08-25
- Revised end handrails above anticlimber (center stanchions moved in from the end)

2016-04-14
- Revised steps - redrawn steps with deeper angled sheet
- Revised jacking pads (no casting hole)
- Added round front platform lights

2017-09-26
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
EMD SD40-2
  
1978-02 -
1978-04
2a3 BN 7029-7053, 8010-8029
2019-01-23Revision history:

2015-08-25
- Revised end handrails above anticlimber (center stanchions moved in from the end)

2016-04-14
- Revised steps - redrawn steps with deeper angled sheet
- Added round front platform lights

2017-09-26
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
EMD SD40-2
  
1978-06 -
1979-03
2a4 BN 7054-7160;
CS 7832-7877
2019-01-23Revision history:

2015-08-25
- Revised end handrails above anticlimber (center stanchions moved in from the end)

2016-04-14
- Revised steps - redrawn steps with deeper angled sheet
- Added round front platform lights

2017-09-26
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
EMD SD40-2
  
1979-04 -
1979-07
2b1 BN 7161-7166, 8030;
CS 7878-7919
2019-01-23Revision history:

2015-08-25
- Revised end handrails above anticlimber (center stanchions moved in from the end)

2016-04-14
- Revised steps - redrawn steps with deeper angled sheet
- Added round front platform lights

2017-09-26
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
EMD SD40-2
  
1979-06 -
1979-12
2b2 BN 7167-7205, 8031-8089;
CS 7920-7923
BN 7167-7205, 8074-8089 built by GMD
2019-01-23Revision history:

2015-08-25
- Revised end handrails above anticlimber (center stanchions moved in from the end)

2016-04-14
- Revised steps - redrawn steps with deeper angled sheet
- Added round front platform lights

2017-09-26
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
EMD SD40-2
  
1980-01 -
1980-07
2c BN 7206-7291, 8090-8181;
CS 7924-7940
BN 7206-7235 built by GMD
2019-01-22Revision history:

2015-08-25
- Revised end handrails above anticlimber (center stanchions moved in from the end)

2016-04-14
- Revised steps - redrawn steps with deeper angled sheet
- Added round front platform lights

2017-09-26
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
EMD SD45
  
1970-06 -
1970-09
2b2 BN 6472-6497
2019-08-10Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box
EMD SD45
  
1971-05 -
1971-08
2c BN 6498-6542
2019-08-10Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box
EMD SD45
  
1971-10 -
1971-12
2c, 3 BN 6543-6567, CS 868-874 BN units Phase 3; CS units Phase 2c
CS 868-874 to BN 6570-6576
2019-08-10Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box
EMD SD60M
  
1989-12 -
1990-03
1c BN 9200-9249 Equipped for fuel tender
2020-01-05Revision history:

2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
EMD SD60M
  
" " " As modified; strobe lights later replaced with ditch lights
2020-01-05Revision history:

2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
EMD SD60M
  
1991-01 -
1991-03
2a BN 1991, 9250-9298
2020-01-05Revision history:

2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
GE B32-8
  
1984-01 BN 5497-5499 2015-08-01
GE C30-7
  
1976-09 -
1977-12
1a BN 5500-5544 Adirondack trucks
A small minority had Rockwell trucks
2019-12-28
GE C30-7
  
1978-09 -
1979-02
1b BN 5545-5581 Adirondack trucks
5567-5581 had lower fuel cutoff switch (as on later units)
2019-12-28
GE C30-7
  
" " " Rockwell trucks 2019-12-28
GE C30-7
  
1979-06 -
1979-11
1c BN 5000-5046, 5582-5599 Adirondack trucks 2019-12-28
GE C30-7
  
" " " Rockwell trucks 2019-12-28
GE C30-7
  
1980-02 -
1980-07
2a BN 5047-5126 Adirondack trucks 2019-12-28
GE C30-7
  
" " " Rockwell trucks 2019-12-28
GE C30-7
  
1981-03 -
1981-06
2c BN 5127-5141 Adirondack trucks 2019-12-28
GE C30-7
  
" " " Rockwell trucks 2019-12-28
GE U30C
  
1972-01 -
1972-12
2f BN 5306-5352
2020-01-25Revision history:

2020-01-25
- Revised hood doors behind cab (left side)
- Corrected line glitch on brake chain pipe (right side)
GE U30C
  
1972-01 -
1972-12
2f BN 5300:1-5305:1, 5353:1-5364:1 Locotrol-equipped
re# 5800-5805, 5900-5911
2020-01-25Revision history:

2020-01-25
- Revised hood doors behind cab (left side)
- Corrected line glitch on brake chain pipe (right side)
GE U30C
  
1973-07 2g1 BN 5806-5813, 5912-5918 Locotrol-equipped
2020-01-25Revision history:

2020-01-25
- Revised hood doors behind cab (left side)
- Corrected line glitch on brake chain pipe (right side)
GE U30C
  
1973-11 -
1973-12
2g1 BN 5814-5823, 5919-5928 Locotrol-equipped
2020-01-25Revision history:

2020-01-25
- Revised hood doors behind cab (left side)
- Corrected line glitch on brake chain pipe (right side)
GE U30C
  
1974-04 -
1974-05
2g3 BN 5824-5833, 5929-5938 Locotrol-equipped
2020-01-25Revision history:

2020-01-25
- Corrected line glitch on brake chain pipe (right side)
GE U30C
  
1974-11 2g3 BN 5365-5394 2,000th 1:18 drawing
2020-01-25Revision history:

2020-01-25
- Corrected line glitch on brake chain pipe (right side)
GE U30C
  
1975-05 2h2 BN 5300:2-5305:2, 5353:2-5364:2
2020-01-25Revision history:

2020-01-25
- Corrected line glitch on brake chain pipe (right side)
GE U30C
  
1975-06 2h2 BN BN 5834-5839, 5939-5944 Locotrol-equipped
2020-01-25Revision history:

2020-01-25
- Corrected line glitch on brake chain pipe (right side)
GE U33C
   
1971-02 -
1971-09
2f BN 5725-5728, 5729-5763
2020-01-25Revision history:

2020-01-25
- Revised hood doors behind cab (left side)
- Corrected line glitch on brake chain pipe (right side)

1:36 Drawings

Number of Drawings: 50

Model Built Phase Numbers Notes
EMD GP38-2
  
1980-06 2c BN (FWD) 2150-2154
EMD GP39-2
  
1981-03 -
1981-04
2c BN 2700-2739 Single
fuel filler
EMD GP39-2
  
" " " Dual
fuel filler
EMD SD40-2
  
1972-01 -
1972-03
1a1 BN 6325-6339;
CS 900-917
EMD SD40-2
  
1974-02 -
1974-05
1a2 BN 6376-6385;
CS 918-925, 980, 996
EMD SD40-2
  
1974-11 -
1974-12
1a2 BN 6700-6707;
CS 950-959
EMD SD40-2
  
1976-02 -
1976-03
1c1 BN 6708-6752
EMD SD40-2
  
1976-11 -
1976-12
2a1 BN 6753-6772
EMD SD40-2
  
1977-11 -
1977-12
2a2 BN 6781-6799, 7000-7028
GE B30-7AB
  
1982-06 -
1982-09
BN 4000-4052 Rockwell FB-2 trucks
GE C30-7
  
1976-09 -
1979-11
1 BN 5000-5046, 5500-5599 Adirondack trucks
GE C30-7
  
" " " Rockwell trucks
GE C30-7
  
1980-02 -
1980-07
2a BN 5047-5126 Adirondack trucks
GE C30-7
  
" " " Rockwell trucks
GE C30-7
  
1981-03 -
1981-06
2c BN 5127-5141 Adirondack trucks
GE C30-7
  
" " " Rockwell trucks
GE U30C
  
1972-01 -
1972-12
2f BN 5306-5352
GE U30C
  
1972-01 -
1972-12
2f BN 5300:1-5305:1, 5353:1-5364:1 Locotrol-equipped
re# 5800-5805, 5900-5911
GE U30C
   
1973-11 -
1974-05
2g1, 2g3 BN 5814-5823, 5919-5928;
5824-5833, 5929-5938
Adirondack trucks
Locotrol-equipped
GE U30C
   
" " " Rockwell trucks
Locotrol-equipped
GE U30C
  
1974-08 -
1974-11
2g3 BN 5365-5394
GE U30C
  
1975-05 2h2 BN 5300:2-5305:2, 5353:2-5364:2 Adirondack trucks
GE U30C
  
" " " Rockwell trucks
GE U30C
  
1975-06 2h2 BN 5834-5839, 5939-5944 Locotrol-equipped

1:55 Drawings

Number of Drawings: 68

Model Phase Numbers Notes Accuracy
EMD GP38-2
  
1a BN 2078-2087
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD GP38-2
  
1b BN 2088-2109
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD GP38-2
  
2c BN (FWD) 2150-2154
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD GP50
  
1a2 BN 3100-3109
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD GP50
  
2b BN 3110-3157
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD GP50L
  
2b BN 3158-3162
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD40
  
2c BN 6300-6324
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD40-2
  
1a1 BN 6325-6339;
CS 900-917
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD40-2
  
1a2 BN 6376-6385;
CS 918-925, 980, 996
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD40-2
  
1c1 BN 6708-6752
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD40-2
  
2a1 BN 6753-6772
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD40-2
  
2a2 BN 6773-6780, 8000-8009;
CS 930-949, 960, 961
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD40-2
  
2a2 BN 6781-6799, 7000-7028
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD40-2
   
2a3, 2a4 BN 7029-7160, 8010-8029;
CS 7832-7877
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD40-2
  
2b1, 2b2 BN 7161-7205, 8030-8089;
CS 7878-7923
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD40-2
  
2c BN 7206-7291, 8090-8181;
CS 7924-7940
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD60M
  
1c BN 9200-9249
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD60M
  
2a BN 1991, 9250-9298
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SDP40
 
BN version
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE B32-8
  
BN 5497-5499
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
1 BN 5500-5599, 5000-5046 Adirondack FB-3 trucks
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
" " Rockwell FB-3 trucks
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
2a BN 5047-5126 Adirondack FB-3 trucks
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
" " Rockwell FB-3 trucks
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
2c BN 5127-5141 Adirondack FB-3 trucks
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE C30-7
  
" " Rockwell FB-3 trucks
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE U30C
  
2f BN 5306-5352
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE U30C
  
2f BN 5300:1-5305:1, 5353:1-5364:1 Locotrol equipped
re# 5800-5805, 5900-5911
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE U30C
  
2g1 BN 5806-5813, 5912-5918 Locotrol equipped
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE U30C
  
2g1, 2g3 BN 5814-5833, 5919-5938 Locotrol equipped
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE U30C
  
2g3 BN 5365-5394
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE U30C
  
2h2 BN 5300:2-5305:2, 5353:2-5364:2
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE U30C
  
2h2 BN 5834-5839, 5939-5944 Locotrol equipped
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
GE U33C
  
2f BN 5725-5763
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)