Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - BO

Selected scales:


See the Locomotive Phases section for phase descriptions.

1:18 Drawings

Model Built Phase Numbers Notes Last modified
EMD GP30
  
1962-10 -
1963-01
1c1 BO 6900-6976
2019-07-31Revision history:

2012-12-16
- Air reservoir size

2014-10-24
- Radiator fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2015-01-20
- Revised radiator intakes - distinction between Phases 1a-1c2 vs. 1d-2b

2015-07-26
- Removed angled walkway plate from top step
- Revised engine room door height (0.5" lower)
- Corrected broken line in cab roof (right-side view)

2016-02-27
- Corrected pilots, support plates and footboards (representing GP18-GP30 version rather than GP35 and later version)

2017-09-02
- Corrected minor line glitch on latches on first engine room door
- Revised coupler pockets
- Corrected mismatched hood seams behind conductor's side inertial air intake
- Revised center radiator fan (changed to cap-top instead of open-top)

2017-10-07
- Revised bottom hatches on hood ends
- Removed bottom hatch latch hooks on short hood

2019-07-31
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors narrowed by 0.75"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
EMD GP35
  
1964-03 -
1964-04
1a2 BO 3500-3519
2019-01-21Revision history:

2012-12-16
- Air reservoir size

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
EMD GP35
  
1964-05 -
1964-09
1b1 BO 3540-3559;
CO 3520-3539
2019-01-21Revision history:

2012-12-16
- Air reservoir size

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
EMD GP35
  
1965-09 -
1965-12
2b BO 3581; CO 3537:2, 3563:2, 3574:2, 3582-3584
2019-08-07Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2019-08-07
- Corrected line/crop issue at right of image
EMD GP38
  
1967-10 -
1967-12
2a1 BO 3800-3849;
CO 3850-3899
2019-01-23Revision history:

2012-12-16
- Revised air reservoir size

2014-10-23
- Truck shape and casting logos
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2016-03-03
- Roof hatch around radiator fans

2016-10-17 paper
- Revised shape at front of dynamic brake housing

2017-03-25
- Added circular panels on hood ends

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
EMD GP38
  
1970-07 -
1970-12
2b BO 4800-4819;
CO 4820-4829
2019-01-23Revision history:

2012-12-16
- Revised air reservoir size

2014-10-23
- Truck shape and casting logos
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2016-03-03
- Roof hatch around radiator fans

2016-10-17 paper
- Revised shape at front of dynamic brake housing

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
EMD GP40
  
1966-11 1a3 BO 3684-3699
2019-01-24Revision history:

2014-10-22
- Truck shape and casting logos
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2016-10-12
- Fuel tank supports (Phase 1 units only)
- Cab sub-base ribs (Except Phase 1a1 units)

2018-10-31
- Corrected minor line glitch on latches on first engine room door

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
- Corrected pipe overlapping bell
EMD GP40
  
1969-02 -
1969-04
2b BO 3700-3739
2019-01-23Revision history:

2012-12-16
- Air reservoir size

2014-10-22
- Truck shape and casting logos
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2017-03-25
- Added circular panels on hood ends

2018-10-31
- Corrected minor line glitch on latches on first engine room door

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
EMD GP40
  
1970-12 -
1971-03
2b BO 3740-3779
2019-01-23Revision history:

2012-12-16
- Air reservoir size

2014-10-22
- Truck shape and casting logos
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2018-10-31
- Corrected minor line glitch on latches on first engine room door

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
EMD GP40
  
1971-05 -
1971-12
2c BO 4000-4064; CO 3780-3794, 4065-4099
2019-01-23Revision history:

2012-12-16
- Air reservoir size

2014-10-22
- Truck shape and casting logos
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2018-10-31
- Corrected minor line glitch on latches on first engine room door

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
EMD GP40-2
  
1972-08 -
1972-11
1a2 (C.S.)
BO GM50, 1977, 4100-4162;
CO 4165-4184
2019-01-24Revision history:

2012-12-16
- Air reservoir size

2014-08-02
- Truck casting logos
- Revised inertial air intake

2014-10-22
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2017-09-27
- Corrected minor line glitch on latches on first engine room door

2019-01-21
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-24
- Fuel tank moved 2.5" rearward
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Revised exhaust stack
EMD GP40-2
  
1975-04 -
1975-07
1a2 (C.S.)
BO 4185-4246
2019-01-24Revision history:

2012-12-16
- Air reservoir size

2014-08-02
- Truck casting logos
- Revised inertial air intake

2014-10-22
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2017-09-27
- Corrected minor line glitch on latches on first engine room door

2019-01-21
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-24
- Fuel tank moved 2.5" rearward
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Revised exhaust stack
EMD GP40-2
  
1977-02 2a1 (C.S.)
BO 4247-4256
2019-01-24Revision history:

2012-12-16
- Air reservoir size

2014-08-02
- Truck casting logos
- Revised inertial air intake

2014-10-22
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2015-03-29
- Inertial air intakes (revised upper/lower ridge detail)
- Rear steps (removed top step corner extension)

2017-09-27
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-21
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-24
- Fuel tank moved 2.5" rearward
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Revised exhaust stack
EMD GP40-2
  
1978-01 -
1978-03
2a1 (C.S.)
BO 4287-4311;
CO 4262-4286
2019-01-24Revision history:

2012-12-16
- Air reservoir size

2014-08-02
- Truck casting logos
- Revised inertial air intake

2014-10-22
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2015-03-29
- Inertial air intakes (revised upper/lower ridge detail)
- Rear steps (removed top step corner extension)

2017-09-27
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-21
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-24
- Fuel tank moved 2.5" rearward
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Revised exhaust stack
EMD GP40-2
  
1978-11 -
1979-03
2a2 (C.S.)
BO 4322-4351;
WM 4312-4321
2019-01-24Revision history:

2012-12-16
- Air reservoir size

2014-08-02
- Truck casting logos
- Revised inertial air intake

2014-10-22
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2015-03-29
- Inertial air intakes (revised upper/lower ridge detail)
- Rear steps (removed top step corner extension)
- Added hose pockets on rear pilot plates

2017-09-27
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-21
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-24
- Fuel tank moved 2.5" rearward
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Revised exhaust stack
EMD GP40-2
  
1981-06 2d (C.S.)
BO 4422-4447
2019-01-24Revision history:

2012-12-16
- Air reservoir size

2014-08-02
- Truck casting logos
- Revised inertial air intake

2014-10-22
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2015-03-29
- Inertial air intakes (revised upper/lower ridge detail)
- Rear steps (removed top step corner extension)

2015-08-19
- Air reservoir piping

2017-09-27
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-21
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-24
- Fuel tank moved 2.5" rearward
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
EMD SD35
  
1964-07 -
1964-10
1a BO 7400-7419
2020-01-19Revision history:

2020-01-19
- Narrower stepwell edges
EMD SD35
  
1965-09 2b2 BO 7437-7440 2020-05-14
EMD SD40
  
1967-05 1b2 (C.S.)
BO 7482-7494;
CO 7475-7481
2019-08-10Revision history:

2017-05-16
- Added missing speed recorder cable

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake fans
- Removed extra bolt on exhaust stack housing

2018-01-02
- Added missing section of bell

2018-02-25
- Removed ballast plate above fuel tank

2018-10-05
- Updated handrail stanchions with even bottoms

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Corrected pipe overlapping bell

2019-01-23
- Relocated dynamic brakes
- Revised exhaust stack

2019-08-10
- Added missing grabiron ahead of right-side battery box
EMD SD40
  
1969-04 2b1 (C.S.)
BO 7497-7500;
CO 7501-7506
2019-08-10Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake fans
- Removed extra bolt on exhaust stack housing

2018-02-25
- Removed ballast plate above fuel tank

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Relocated dynamic brakes
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear

2019-08-10
- Added missing grabiron ahead of right-side battery box
EMD SD40-2
  
1977-01 -
1977-02
2a1 BO 7600-7619
2019-01-23Revision history:

2017-09-26
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
EMD SD50
  
1984-07 -
1984-08
(CSX)
BO 8576-8595
2020-01-05Revision history:

2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
- Revised hood behind cab (SD60 right-side views only)

1:36 Drawings

Model Built Phase Numbers Notes
EMD GP38
  
1967-10 -
1967-12
2a2 BO 3800-3849;
CO 3850-3899
EMD GP38
  
1970-07 -
1970-12
2b BO 4800-4819;
CO 4820-4829
EMD GP40
  
1966-11 1a3 BO 3684-3699
EMD GP40
  
1969-02 -
1969-04
2b BO 3700-3739
EMD GP40
  
1970-12 -
1971-03
2b BO 3740-3779
EMD GP40
  
1971-05 -
1971-12
2c BO 4000-4064;
CO 3780-3794, 4065-4099
EMD GP40-2
  
1972-08 -
1972-11
1a2 (C.S.)
BO GM50, 1977, 4100-4162;
CO 4165-4184
EMD GP40-2
  
1975-04 -
1975-07
1a2 (C.S.)
BO 4185-4246
EMD GP40-2
  
1977-02 2a1 (C.S.)
BO 4247-4256
EMD GP40-2
  
1978-01 -
1978-03
2a1 (C.S.)
BO 4287-4311;
CO 4262-4286
EMD GP40-2
  
1978-11 -
1979-03
2a2 (C.S.)
BO 4322-4351;
WM 4312-4321
EMD GP40-2
  
1981-06 2d (C.S.)
BO 4422-4447
EMD SD40
  
1967-05 1b2 (C.S.)
BO 7482-7494;
CO 7475-7481
EMD SD40
  
1969-04 2b1 (C.S.)
BO 7497-7500;
CO 7501-7506
EMD SD40-2
  
1977-01 -
1977-02
2a1 BO 7600-7619
EMD SD50
  
1984-07 -
1984-08
2b2 (CSX)
BO 8576-8595

1:55 Drawings

Model Phase Numbers Notes Accuracy
EMD GP30
  
1c1 BO 6900-6976
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP35
  
1a2 BO 3500-3519
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP35
  
1b1 CO 3529-3539;
BO 3540-3559
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP38
  
2a2 BO 3800-3849;
CO 3850-3899
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP38
  
" " As modified
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP38
  
2b BO 4800-4819;
CO 4820-4829
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40
  
1a3 BO 3684-3699
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40
  
2b BO 3700-3739
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40
  
2b BO 3740-3779
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40
  
2c BO 4000-4064;
CO 4065-4099
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40-2
  
1a2 (C.S.)
BO 4100-4162, 4185-4246;
CO 4165-4184
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40-2
  
2a2 (C.S.)
BO 4322-4351;
WM 4312-4321
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40M-3
  
TM 1163, 1163, 1171, 1173, 1176, 1178 ex-BO
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40M-3
  
TM 1166 ex-BO
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40M-3
  
TM 1169, 1175, 1179 ex-BO
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40M-3
  
TM 1174 ex-BO
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP9
  
2b BO 675-696, re# 6425-6446;
6447-6500
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP9
  
2b BO 6501-6510
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP9
  
2c BO 6511-6571
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP9
  
3 BO 6572-6598
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD SD40
  
1b2 (C.S.)
BO 7482-7494, CO 7475-7481
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD SD40
  
2b1 (C.S.)
BO 7497-7500, CO 7501-7506
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD SD40-2
  
2a1 BO 7600-7619
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
FM H16-44
  
3b BO 925-927
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
FM H16-44
  
3b BO 6705-6709
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)