Top header photo
 Trainiax logo
HomeNew Contact Links

Undecorated Drawings - CRR

Selected Scales: 1:181:361:55

See the Locomotive Phases section for phase descriptions.

1:18 Drawings

Number of Drawings: 16

Model Built Phase Numbers Notes Last modified
EMD GP11
  
1979-04 -
1979-05
1b CRR 4600-4605 GP7 rebuild 2014-10-24
EMD GP38
  
1967-04 1a3 CRR 2000-2009
2019-01-23Revision history:

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
EMD GP38-2
  
1978-06 2a2 (F.L.)
CRR 6000-6004
2019-01-24Revision history:

2018-01-14
- Corrected small transparency error under exhaust stacks

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Revised roof fan hatch

2019-01-24
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
EMD GP38-2
  
1979-04 2b1 (F.L.)
CRR 6005-6006
2019-01-24Revision history:

2018-01-14
- Corrected small transparency error under exhaust stacks

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Revised roof fan hatch

2019-01-24
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
EMD GP38-2
  
1979-07 -
1979-08
2b2 (F.L.)
CRR 6045; LN 6031-6044; SCL 6046-6050
2019-01-24Revision history:

2018-01-14
- Corrected small transparency error under exhaust stacks

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Revised roof fan hatch

2019-01-24
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
EMD SD40-2
  
1980-08 2c1 (F.L.)
CRR 8127-8129
2019-01-22Revision history:

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Added missing bell
EMD SD40-2
  
1981-09 2d2 (F.L.)
CRR 8131-8132
2019-01-22Revision history:

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Added missing bell
EMD SD45-2
  
1972-11 -
1974-02
CRR 3607-3624
2019-08-07Revision history:

2014-02-17
- Truck shape and casting logo

2014-10-22
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2017-11-11
- Revised central hood door spacing

2019-07-24
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle hood doors narrowed by 0.5"
- Rear hood seam and doors moved rearward by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack and dynamic brake taper

2019-08-07
- Changed center axle shock strut to earlier version

1:36 Drawings

Number of Drawings: 14

Model Built Phase Numbers Notes
EMD GP16
  
1979 (R) CRR 4600-4605 Rebuilt by IC
to GP11 specs
EMD GP38-2
  
1978-06 2a2 (F.L.)
CRR 6000-6004
EMD GP38-2
  
1979-04 2b1 (F.L.)
AWP 6007-6008;
CRR 6005-6006;
GA 6009-6010
EMD GP38-2
  
1979-07 -
1979-08
2b2 (F.L.)
CRR 6045;
LN 6031-6044;
SCL 6046-6050
EMD SD40
  
1966-09 1a3 CRR 3000-3007
EMD SD40
  
1968-08 -
1969-02
2b CRR 3008-3014
EMD SD40
  
1971-06 2c CRR 3015-3024

1:55 Drawings

Number of Drawings: 6

Model Phase Numbers Notes Accuracy
EMD SD40
  
1a3 CRR 3000-3007
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD40-2
  
2c1 (F.L.)
CRR 8127-8129
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)
EMD SD45-2
  
CRR 3607-3624
Accuracy legend for 1:55 drawings:
★ 2007-2008 drawings (mostly accurate)
☆ 2005-2007 drawings (generally accurate)
— 2000-2004 drawings (not dimensionally accurate)