Undecorated Drawings - EMDX
Selected scales: |
1:18 Drawings
Model | Built | Phase | Numbers | Notes | Last modified |
---|---|---|---|---|---|
EMD GP20 ← → | 1960-08 | 1a | EMDX 5625-5628 | 2023-07-10Revision history:
2020-12-05 - Increased handrail thickness - Revised radiator and dynamic brake fans 2022-01-03 - Larger roof lift rings - Added lift rings around dynamic brakes 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Footboard height increased by 1.25" - Revised coupler carrier / draft gear - Horn manifold and back cap dimensions 2022-11-15 - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-07 - Removed handrail stanchion top clamps - Adjusted handrail stanchion spacing next to short hood - Added missing section of front hood doors (right side) 2023-02-16 - Fuel tank height - Fuel filler - Added missing line segment on bottom front edge of generator room doors (right side) 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) | |
EMD GP20 ← → | 1960-08 | 1a | SP 7234-7237 | ex-EMDX 5625-5628; re# 4084-4087 | 2023-07-10Revision history:
2020-12-05 - Increased handrail thickness - Revised radiator and dynamic brake fans 2022-01-03 - Larger roof lift rings - Added lift rings around dynamic brakes 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Footboard height increased by 1.25" - Revised coupler carrier / draft gear 2022-11-15 - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-07 - Removed handrail stanchion top clamps - Adjusted handrail stanchion spacing next to short hood - Added missing section of front hood doors (right side) 2023-02-16 - Fuel tank height - Fuel filler - Added missing line segment on bottom front edge of generator room doors (right side) 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP35 ← → | 1963-07 - 1963-08 | 1a1 | EMDX 5652, 5654 | 2022-03-02Revision history:
2018-11-11 - Corrected minor line glitch on latches on first engine room door 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood 2020-12-06 - Increased handrail thickness - Revised radiator and dynamic brake fans (48" fans) 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Dynamic brake housing dimensions and shape - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts 2022-03-02 - Horn manifold and back cap dimensions | |
EMD GP35 ← → | 1964-02 | 1a1 | EMDX 5661 | re# EMDX 1964 | 2022-03-02Revision history:
2018-11-11 - Corrected minor line glitch on latches on first engine room door 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood 2020-12-06 - Increased handrail thickness - Revised radiator and dynamic brake fans (48" fans) 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Dynamic brake housing dimensions and shape - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts 2022-03-02 - Horn manifold and back cap dimensions |
EMD GP40X ← → | 1965-04 | EMDX 433A | GP40 test-bed on GP35 frame | 2022-03-02Revision history:
2020-12-06 - Increased handrail thickness - Revised radiator and dynamic brake fans 2020-12-16 - Revised radiator fan spacing 2021-01-13 - Fuel tank height and gap from underframe - Fuel tank vent pipe - Handrail stanchions above fuel tank (left side) | |
EMD GP59 ← → | 1985-06 | 1 | EMDX 8-9 | 2022-12-11Revision history:
2014-02-15 - Truck shape and casting logo 2014-10-23 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) 2014-11-15 - Revised inertial air intakes 2015-08-25 - Revised end handrails (center stanchions moved in from the end, modified stanchion/chain support) 2015-09-03 - Corrected location of front class lights 2020-01-05 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-15 - Increased handrail thickness - Fuel tank vent pipe (increased diameter, revised fittings) - Revised radiator and dynamic brake fan dimensions and spacing - Increased metal sand pipe diameter 2021-01-12 - Fuel tank height and gap from underframe 2021-02-10 - Revised side handrail stanchions 2022-12-11 - Coupler cut levers - Corner handrail end plate / stairwell attachment points - Anticlimber | |
EMD GP59 ← → | 1985-06 | 1 | EMDX 10 | 2022-12-11Revision history:
2014-10-23 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) 2014-11-15 - Revised inertial air intakes 2015-08-25 - Revised end handrails (center stanchions moved in from the end, modified stanchion/chain support) 2015-09-03 - Corrected location of front class lights 2020-01-05 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-15 - Increased handrail thickness - Fuel tank vent pipe (increased diameter, revised fittings) - Revised radiator and dynamic brake fan dimensions and spacing - Increased metal sand pipe diameter 2021-01-12 - Fuel tank height and gap from underframe 2021-02-10 - Revised side handrail stanchions 2022-12-11 - Coupler cut levers - Corner handrail end plate / stairwell attachment points - Anticlimber | |
EMD SD40X ← → | 1964-07 | 1a | EMDX 434 | SD40 test-bed on SD35 frame to GMO 950 | 2022-03-21Revision history:
2020-01-19 - Narrower stepwell edges 2020-12-16 - Increased handrail thickness - Revised radiator and dynamic brake fans (48" fans) 2021-01-13 - Fuel tank height and gap from underframe - Fuel tank vent pipe (increased diameter, revised fittings) - Handrail stanchions above fuel tank (left side) 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions |
EMD SD40X ← → → | 1965-02 - 1965-04 | 1d1, 1d2 | EMDX 434A-434F | SD40 test-bed on SD35 frame to UP 3040-3045 | 2022-03-21Revision history:
2020-01-19 - Narrower stepwell edges 2020-12-16 - Increased handrail thickness - Revised radiator and dynamic brake fans (48" fans) 2021-01-13 - Fuel tank height and gap from underframe - Fuel tank vent pipe (increased diameter, revised fittings) - Handrail stanchions above fuel tank (left side) 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions |
EMD SD40X ← → | 1965-04 | 1d2 | EMDX 434G-434H | SD40 test-bed on SD35 frame; to UP 3046-3047 Radiator intakes as modified by UP (lack of as-built reference photos) | 2022-03-21Revision history:
2020-12-16 - Increased handrail thickness - Revised radiator and dynamic brake fans (48" fans) 2021-01-13 - Fuel tank height and gap from underframe - Fuel tank vent pipe (increased diameter, revised fittings) - Handrail stanchions above fuel tank (left side) 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions |
EMD SD45 ← → | 1965-12 - 1966-01 | 1a1 | EMDX 4351-4353 | 2022-03-21Revision history:
2014-12-31 - Underframe height - Truck details and casting logos 2017-05-20 - Removed dynamic brake roof vent - Revised handrail stanchion at rear of walkway blower duct 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
EMD SD60 ← → | 1986-10 - 1986-12 | EMDX 9000-9099 | Oakway Leasing | 2023-01-19Revision history:
2017-07-01 - Corrected latches on first and last tall hood doors 2017-12-31 - Revised angled sheet behind bottom step - Revised piping behind fuel tank 2020-01-05 - Revised center hood door spacing - Increased height of walkway blower duct and bottom of hood doors - Revised hood behind cab (right-side view) 2020-11-28 - Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2020-12-26 - Corrected location of handrail attachment point to rear of cab (left side) 2021-01-10 - Fuel tank height and gap from underframe 2021-01-22 - Relocated horn 2022-12-12 - Coupler cut levers - Corner handrail end plate / stairwell attachment points 2023-01-19 - Hood door and radiator intake height | |
EMD SD70ACe ← → | 2011-08 | 2f | EMDX 2012 | 2022-03-30Revision history:
2017-02-06 - Relocated traction motor cables above rear truck (left side) - Minor revisions to cables above front truck (left side) - Minor correction to rear edge of panel behind inverter cabinet (below grabirons) (left side) 2017-09-19 - Revised truck traction pin (near center axle on trucks) - Added minor truck details (bolts under axles and pins at radial-steering arm ends) - Smaller radiator fan diameter and spacing, fans moved rearward - Added missing section of air pipe behind front steps (left side) - Revised inverter cabinet grills 2017-11-11 - Relocated hole below handbrake wheel (right side) 2017-12-17 - Revised cables/pipes under back of cab (right side) 2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Added missing portion of brake levers near brake cylinders - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points | |
EMD SD70ACe ← → | 2011-09 - 2011-10 | 2f | EMDX 2100-2114 | 2100-2109 re# KCS 4130-4139; 2110-2114 re# EMDX 1201-1205 | 2022-03-30Revision history:
2017-02-06 - Relocated traction motor cables above rear truck (left side) - Minor revisions to cables above front truck (left side) - Minor correction to rear edge of panel behind inverter cabinet (below grabirons) (left side) 2017-09-19 - Revised truck traction pin (near center axle on trucks) - Added minor truck details (bolts under axles and pins at radial-steering arm ends) - Smaller radiator fan diameter and spacing, fans moved rearward - Added missing section of air pipe behind front steps (left side) - Revised inverter cabinet grills 2017-11-11 - Relocated hole below handbrake wheel (right side) 2017-12-17 - Revised cables/pipes under back of cab (right side) 2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Added missing portion of brake levers near brake cylinders - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points |
1:36 Drawings
Model | Built | Phase | Numbers | Notes |
---|---|---|---|---|
EMD SD45 ← → | 1965-12 - 1966-01 | 1a1 | EMDX 4351-4353 | |
EMD SW1500 ← → | 1967-11 | 1b | EMDX 108-109, IU 24 | Type A trucks |
EMD SW1500 ← → | 1968-11 - 1969 | 2a | EMDX 110-112 | Type A trucks |
EMD SW1500 ← → | 1971-04 - 1971-08 | 3b | EMDX 113-114 | Type A trucks |
EMD SW1500 ← → | 1972-12 | 3b | IU 30-32 | Type A trucks IU 24 with EMDX 108-109 above |
See also: