Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - GTW

Selected scales:


See the Locomotive Phases section for phase descriptions.

1:18 Drawings

Model Built Phase Numbers Notes Last modified
EMD GP38-2
  
1978-12 2a2 GTW 5812-5831
2019-01-24Revision history:

2014-10-23
- Radiator fans (bottom rim edge and upper rim clips)

2015-03-14
- Revised anticlimber

2015-03-29
- Inertial air intakes (revised upper/lower ridge detail)
- Rear steps (removed top step corner extension)

2015-08-25
- Revised end handrails above anticlimber (center stanchions moved in from the end)

2017-09-27
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Revised roof fan hatch

2019-01-24
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
EMD GP38-2
  
1980-01 2c1 GTW 5832-5836
2019-01-24Revision history:

2014-10-23
- Radiator fans (bottom rim edge and upper rim clips)

2015-03-14
- Revised anticlimber

2015-03-29
- Inertial air intakes (revised upper/lower ridge detail)
- Rear steps (removed top step corner extension)

2015-08-25
- Revised end handrails above anticlimber (center stanchions moved in from the end)

2017-09-27
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Revised roof fan hatch

2019-01-24
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
EMD GP38AC
  
1971-11 3 GTW 5800-5811
2019-01-31Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing

2019-01-23
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2019-01-31
- Added missing snow shields
EMD SD40
  
1969-08 -
1970-01
2b1 GTW 5900-5920
2019-08-10Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Removed extra bolt on exhaust stack housing

2018-10-17
- Removed rear numberboards

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear

2019-08-10
- Added missing grabiron ahead of right-side battery box
EMD SD40
  
1970-09 2b2 GTW 5921-5929
2019-08-10Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Removed extra bolt on exhaust stack housing

2018-10-17
- Removed rear numberboards

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear

2019-08-10
- Added missing grabiron ahead of right-side battery box

1:36 Drawings

Model Built Phase Numbers Notes
EMD F3A
  
1948-05 GTW 9006-9015
EMD F3A
  
1948-09 4 GTW 9016-9027
EMD GP38-2
  
1978-12 2a GTW 5812-5831
EMD GP9
  
1954-08 1b GTW 1751-1765, re# 4427-4441 CN Class GR-17b
EMD GP9
  
" " GTW 4427-4441
(as modified)
"

1:55 Drawings

Model Phase Numbers Notes Accuracy
EMD GP38-2
  
2a GTW 5812-5831
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP38AC
  
3 GTW 5800-5811
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)