Undecorated Drawings - KCS
Selected scales: |
1:18 Drawings
Model | Built | Phase | Numbers | Notes | Last modified |
---|---|---|---|---|---|
EMD GP30 ← → | 1962-05 | 1a | KCS 100-109 | 2022-03-15Revision history:
2016-02-27 - Corrected pilots, support plates and footboards (representing GP18-GP30 version rather than GP35 and later version) 2017-09-02 - Corrected minor line glitch on latches on first engine room door - Revised coupler pockets - Corrected mismatched hood seams behind conductor's side inertial air intake - Revised center radiator fan (changed to cap-top instead of open-top) 2017-10-07 - Revised bottom hatches on hood ends - Removed bottom hatch latch hooks on short hood 2019-07-31 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors narrowed by 0.75" - Middle hood doors narrowed by 0.25" - Increased height of walkway blower duct and bottom of hood doors 2020-12-06 - Increased handrail thickness - Revised radiator fans (48" fans) 2022-01-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts - Corrected minor transparency glitch with front truck traction motor air ducts (right side) 2022-03-15 - Horn manifold and back cap dimensions | |
EMD GP30 ← → | 1963-07 | 2a | KCS 110-119 | 2022-03-15Revision history:
2016-02-27 - Corrected pilots, support plates and footboards (representing GP18-GP30 version rather than GP35 and later version) 2017-09-02 - Corrected minor line glitch on latches on first engine room door - Revised coupler pockets - Corrected mismatched hood seams behind conductor's side inertial air intake - Revised center radiator fan (changed to cap-top instead of open-top) 2017-10-07 - Revised bottom hatches on hood ends - Removed bottom hatch latch hooks on short hood 2019-07-31 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors narrowed by 0.75" - Middle hood doors narrowed by 0.25" - Increased height of walkway blower duct and bottom of hood doors 2020-12-06 - Increased handrail thickness - Revised radiator fans (48" fans) 2022-01-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts - Corrected minor transparency glitch with front truck traction motor air ducts (right side) 2022-03-15 - Horn manifold and back cap dimensions | |
EMD GP38-2 ← → | 1974-01 | 1b2 | KCS 4000-4009 | 2023-01-09Revision history:
2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised paper air filter housing and dynamic brake taper - Revised roof fan hatch 2019-01-24 - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward 2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-07 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD GP38-2 ← → | 1978-06 | 2a2 | KCS 4010-4011 | 2023-01-09Revision history:
2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised paper air filter housing and dynamic brake taper - Revised roof fan hatch 2019-01-24 - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward 2020-11-11 - Removed batten strip from rear of dynamic brake hatch (left side) 2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-08 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD GP40-2 ← → | 1979-08 | 2b2 | KCS 792, 798 | 2023-01-09Revision history:
2019-01-21 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-24 - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward - Revised exhaust stack 2020-11-11 - Removed batten strip from rear of dynamic brake hatch 2020-12-07 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-08 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD SD40 ← → | 1966-10 - 1966-12 | 1b1 | KCS 600-613 | 2022-03-21Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
EMD SD70ACe ← → | 2011-09 - 2011-10 | 2f | EMDX 2100-2114 | 2100-2109 re# KCS 4130-4139; 2110-2114 re# EMDX 1201-1205 | 2022-03-30Revision history:
2017-02-06 - Relocated traction motor cables above rear truck (left side) - Minor revisions to cables above front truck (left side) - Minor correction to rear edge of panel behind inverter cabinet (below grabirons) (left side) 2017-09-19 - Revised truck traction pin (near center axle on trucks) - Added minor truck details (bolts under axles and pins at radial-steering arm ends) - Smaller radiator fan diameter and spacing, fans moved rearward - Added missing section of air pipe behind front steps (left side) - Revised inverter cabinet grills 2017-11-11 - Relocated hole below handbrake wheel (right side) 2017-12-17 - Revised cables/pipes under back of cab (right side) 2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Added missing portion of brake levers near brake cylinders - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points |
EMD SD70ACe ← → | 2005-10 - 2005-12 | 2a2 | KCS 4000-4029 | HTSC trucks | 2022-03-30Revision history:
2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points |
EMD SD70ACe ← → | 2007-08 - 2007-10 | 2d2 | KCS 4030-4059 | HTSC trucks | 2022-03-30Revision history:
2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points |
EMD SD70ACe ← → | 2008-01 - 2008-03 | 2e1 | KCS 4100-4129 | HTSC trucks | 2022-03-30Revision history:
2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points |
GE AC4400CW ← → | 1999-11 - 1999-12 | 2a1 | KCS 2000-2049 | 2022-11-11Revision history:
2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side) 2020-10-20 - Added X-panel under central air intake (left side) - Added sideframe holes below cab sub-base 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-01-05 - Added numberboard latches 2022-11-11 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts | |
GE ES44AC ← → | 2011-12 - 2012-10 | 2f1 | KCSM 4760-4764, KCS 4765-4809 | 2022-11-29Revision history:
2019-08-12 - Corrected minor transparency issue in radiators (left side) 2020-01-14 - Revised grabirons behind cab (left-side) - Revised wide handrail stanchions 2021-01-12 - Increased corner handrail thickness - Revised end handrail stanchions 2022-01-09 - Added numberboard seam - Cab door window height - Corrected line glitch on right front / left rear traction motor air duct - Added missing sight glass under right side radiators 2022-11-12 - Coupler cut lever and pilot details - Corner handrail and step bolts - Added missing truck brake piping (left side) 2022-11-28 - Corner step height - Added AEI tag above left rear truck | |
GE ES44AC ← → | 2013 - 2014-05 | 2f2 | KCS 4810-4829 | 2022-11-29Revision history:
2019-08-12 - Corrected minor transparency issue in radiators (left side) 2020-01-14 - Revised grabirons behind cab (left-side) - Revised wide handrail stanchions - Thinner side handrails 2021-01-12 - Increased corner and side handrail thickness - Revised end handrail stanchions 2022-01-09 - Added numberboard seam - Cab door window height - Corrected line glitch on right front / left rear traction motor air duct - Added missing sight glass under right side radiators 2022-11-12 - Coupler cut lever and pilot details - Corner handrail and step bolts - Added missing truck brake piping (left side) 2022-11-28 - Corner step height - Added AEI tag above left rear truck | |
GE ES44AC ← → | 2014-10 - 2015-07 | 2g | KCS 4830-4869, KCSM 4870-4894 | 2022-11-29Revision history:
2020-01-14 - Revised grabirons behind cab (left-side) - Revised wide handrail stanchions - Thinner side handrails 2021-01-12 - Increased corner and side handrail thickness - Revised end handrail stanchions 2022-01-09 - Added numberboard seam - Cab door window height - Corrected line glitch on right front / left rear traction motor air duct - Added missing sight glass under right side radiators 2022-11-12 - Coupler cut lever and pilot details - Corner handrail and step bolts - Added missing truck brake piping (left side) 2022-11-28 - Corner step height - Added AEI tag above left rear truck |
1:36 Drawings
Model | Built | Phase | Numbers | Notes |
---|---|---|---|---|
EMD GP38-2 ← → | 1974-01 | 1b | KCS 4000-4009 | |
EMD GP38-2 ← → | 1978-06 | 2a | KCS 4010-4011 | |
EMD GP40-2 ← → | 1979-08 | 2b2 | KCS 792, 798 | |
EMD GP40-2 ← → | 1981-02 | 2c2 | KCS 796-797 | |
EMD SD70ACe ← → | 2007 | 2d2 | KCS 4030-4059 | HTSC trucks |
EMD SD70ACe ← → | 2008 | 2e | KCS 4100-4129 | HTSC trucks isolated cab |
GE ES44AC ← → | 2007 | 2b | KCS 4680-4709; KCSM 4710-4729 |
1:55 Drawings
Model | Phase | Numbers | Notes | Accuracy |
---|---|---|---|---|
EMD GP30 ← → | 1a | KCS 100-109 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP30 ← → | 2a | KCS 110-119 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD40 ← → | 1b1 | KCS 600-613 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD40 ← → | 2b1, 2b2 | KCS 614-627 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD40 ← → | 2c | KCS 628-636 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD40-2 ← → | 1a2 | KCS 637-666 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD40-2 ← → | " | " | as modified | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD SD40-2 ← → | 2a1 | KCS 667-676 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD40-2 ← → | " | " | as modified | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD SD40-2 ← → | " | " | as modified | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD SD40-2 ← → | 2a3, 2a4 | KCS 677-686 | 123" short hood | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD SD40-2 ← → | 2c1 | KCS 687-690 | 123" short hood | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD SD40-2 ← → | " | " | as modified | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD SD40-2 ← → | 2c1 | KCS 691, 692 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD40-2 ← → | " | " | as modified | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD SD60 ← → | KCS 714-723 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD60 ← → | KCS 724-759 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
GE AC4400CW ← → | 2a | KCS 2000-2049 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GMD GP40-2L(W) ← ← → | KCS 4700-4707 | ex-CN | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GMD GP40-2L(W) ← → | KCS 4708 | ex-CN | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GMD GP40-2L(W) ← ← → | KCS 4709-4722 | ex-CN | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
See also: