Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - LIRR

Selected scales:


See the Locomotive Phases section for phase descriptions.

1:18 Drawings

Model Built Phase Numbers Notes Last modified
EMD GP38-2
  
1976-01 -
1976-02
1b2 LIRR 250-271
2019-01-24Revision history:

2014-02-16
- Truck shape and casting logos

2014-10-23
- Radiator fans (bottom rim edge and upper rim clips)

2015-03-29
- Inertial air intakes (revised upper/lower ridge detail)

2017-09-27
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Revised roof fan hatch

2019-01-24
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
EMD GP38-2
  
1977-03 2a1 LIRR 272-277
2019-01-24Revision history:

2014-02-16
- Truck shape and casting logos

2014-10-23
- Radiator fans (bottom rim edge and upper rim clips)

2015-03-29
- Inertial air intakes (revised upper/lower ridge detail)
- Rear steps (removed top step corner extension)

2015-08-25
- Revised end handrails above anticlimber (center stanchions moved in from the end)

2017-09-27
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Revised roof fan hatch

2019-01-24
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward

1:36 Drawings

Model Built Phase Numbers Notes
EMD DE30AC
  
1997 -
1998
LIRR 400-422
EMD DM30AC
  
1997 -
1998
LIRR 500-522

1:55 Drawings

Model Phase Numbers Notes Accuracy
EMD GP38-2
  
1b LIRR 250-271
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP38-2
  
2a LIRR 272-277
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP38-2
  
1b LLPX 2234-2251 ex-LIRR
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP38-2
  
2a LLPX 2252-2257 ex-LIRR
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
FM CPA20-5
  
LIRR 2001-2008
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
FM CPA24-5
  
LIRR 2401-2404
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)