Undecorated Drawings - MEC
Selected scales: |
1:18 Drawings
Model | Built | Phase | Numbers | Notes | Last modified |
---|---|---|---|---|---|
ALCO RS-11 ← → | 1956-06 | 1a1 | MEC 801; PTM 1082 | PTM 1082 re# MEC 802 | 2023-11-20Revision history:
2019-01-09 - Shorter cab side window - Added radiator fan clips 2019-01-11 - Replaced curved sanding line pipe at ends with hose - Revised pipes on engineer's side behind fuel tank - Added rooftop vent on conductor's side behind cab 2019-01-14 - Revised air cooling manifold piping (over intercooler intake) 2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2020-11-04 - Narrower cab side window 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing 2022-03-23 - Coupler cut lever and pilot end handrail 2023-11-20 - Added missing step behind cab (right side) |
EMD GP38 ← → | 1966-11 | 1a3 | MEC 251-262 | 2022-03-02Revision history:
2018-12-01 - Corrected minor line glitch on latches on first engine room door 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Revised handrail stanchion spacing - Fuel tank and air reservoirs moved 1" to 1.5" rearward 2020-12-04 - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Added missing pixel in left side frame above rear of fuel tank 2021-01-09 - Fuel tank height and gap from underframe 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-03-02 - Horn manifold and back cap dimensions | |
EMD GP38 ← → | 1967-12 | 2a1 | MEC 263 | 2022-03-02Revision history:
2018-12-01 - Corrected minor line glitch on latches on first engine room door 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Revised handrail stanchion spacing - Fuel tank and air reservoirs moved 1" to 1.5" rearward 2020-12-04 - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Added missing pixel in left side frame above rear of fuel tank 2021-01-09 - Fuel tank height and gap from underframe 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-03-02 - Horn manifold and back cap dimensions | |
GE U18B ← → | 1975-05 | 2h3 | MEC 400-409 | 2022-02-10Revision history:
2020-02-11 - Corrected minor line glitch in front upper air intake (right side) - Revised air filter behind fuel tank (right side) 2020-02-13 - Increased corner step spacing 2020-12-31 - Increased corner handrail thickness 2021-02-05 - Fuel filler 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets |
1:36 Drawings
Model | Built | Phase | Numbers | Notes |
---|---|---|---|---|
EMD GP38 ← → | 1966-11 - 1966-12 | 1a3 | MEC 251-262 | |
EMD GP38 ← → | " | " | " | as modified |
EMD GP38 ← → | 1967-10 | 2a2 | MEC 263 | |
EMD GP38 ← → | " | " | " | as modified |
GMD GP40-2(W) ← → | MEC 509-519 | ex-CN | ||
GMD GP40-2L(W) ← → | MEC 500-507 | ex-CN | ||
GMD GP40-2L(W) ← → | MEC 508 | ex-CN |
1:55 Drawings
Model | Phase | Numbers | Notes | Accuracy |
---|---|---|---|---|
EMD GP38 ← → | 1a3 | MEC 251-262 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38 ← → | " | " | As modified | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
GE U18B ← → | 2h1 | MEC 400-409 | Blomberg trucks | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
GMD GP40-2(W) ← → | MEC 509-519 | ex-CN | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GMD GP40-2L(W) ← → | MEC 500-507 | ex-CN | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GMD GP40-2L(W) ← → | MEC 508 | ex-CN | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
See also: