Undecorated Drawings - SCL
Selected scales: |
1:18 Drawings
Model | Built | Phase | Numbers | Notes | Last modified |
---|---|---|---|---|---|
EMD GP38-2 ← → | 1973-03 - 1973-11 | 1b2 | (F.L.) SCL 500-555 | 2023-01-09Revision history:
2018-01-10 - Added rear Mars light - Changed front Gyralite to Mars light 2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised paper air filter housing and dynamic brake taper - Revised roof fan hatch 2019-01-24 - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward 2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-07 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams 2023-10-25 - Nathan P-series horn dimensions | |
EMD GP38-2 ← → | 1979-07 - 1979-08 | 2b2 | (F.L.) CRR 6045; LN 6031-6044; SCL 6046-6050 | 2023-01-09Revision history:
2018-01-14 - Corrected small transparency error under exhaust stacks 2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised paper air filter housing and dynamic brake taper - Revised roof fan hatch 2019-01-24 - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward 2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-08 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD GP38-2 ← → | 1980-03 | 2c1 | (F.L.) GA 6051-6052, SCL 6053-6054 | 2023-01-09Revision history:
2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised paper air filter housing and dynamic brake taper - Revised roof fan hatch 2019-01-24 - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward 2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-08 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD GP38-2 ← → | 1980-10 - 1980-11 | 2c2 | (F.L.) SCL 6055-6065 | 2023-01-09Revision history:
2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised paper air filter housing and dynamic brake taper - Revised roof fan hatch 2019-01-24 - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward 2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-08 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD GP40-2 ← → | 1972-12 | 1a1 | (F.L.) SCL 1636-1656 | 2023-01-09Revision history:
2014-10-22 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) 2017-09-27 - Corrected minor line glitch on latches on first engine room door 2019-01-21 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-24 - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward - Revised exhaust stack 2020-12-07 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-07 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD GP40-2 ← → | 1980-06 | 2c1 | (F.L.) SCL 6617-6621 | 2023-01-09Revision history:
2017-09-27 - Revised position of lift ring and flag holder at rear of long hood - Corrected minor line glitch on latches on first engine room door 2018-01-10 - Removed front Gyralite - Removed cab visors/sunshades - Revised antenna 2019-01-21 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-24 - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward 2019-08-07 - Removed partial cab light glitch (left side) 2020-12-07 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-08 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD SD40-2 ← → | 1979-07 - 1979-08 | 2b2 | (F.L.) SCL 8040-8066 | 2023-01-09Revision history:
2017-12-08 - Removed pixel error on front radiator fan (right side view) 2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised exhaust stack 2020-12-18 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) - Adjusted height of center hinge of engine room doors - Added missing line segment in traction motor cables above fuel filler (left side) 2021-01-09 - Fuel tank height and gap from underframe 2022-03-19 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD SD40-2 ← → | 1980-05 - 1980-06 | 2c1 | (F.L.) SCL 8087-8094, 8130 | 2023-01-09Revision history:
2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Added missing bell 2020-12-18 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) - Adjusted height of center hinge of engine room doors - Added missing line segment in traction motor cables above fuel filler (left side) 2021-01-09 - Fuel tank height and gap from underframe 2022-03-19 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD SD45 ← → | 1968-10 | 2b1 | SCL 2010-2023 | 2022-03-29Revision history:
2017-05-20 - Removed dynamic brake roof vent - Revised handrail stanchion at rear of walkway blower duct 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-07 - Corrected sand line glitch near steps (right side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
EMD SD45 ← → | 1971-09 - 1971-10 | 2c | SCL 2024-2044 | 2022-03-29Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-07 - Corrected sand line glitch near steps (right side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
EMD SD45-2 ← → | 1974-08 - 1974-09 | SCL 2045-2059 | 2023-01-09Revision history:
2014-02-17 - Truck shape and casting logo 2014-10-22 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) 2017-11-11 - Revised central hood door spacing 2019-07-24 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle hood doors narrowed by 0.5" - Rear hood seam and doors moved rearward by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised exhaust stack and dynamic brake taper 2019-08-07 - Changed center axle shock strut to earlier version 2020-12-22 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-20 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | ||
GE B23-7 ← → | 1978-01 - 1978-02 | 1a | (F.L.) SCL 5100-5114 | 2022-08-02Revision history:
2018-01-15 - Minor correction to sand line above right rear truck 2018-11-21 - Revised air reservoir height and brackets - Changed air reservoir brackets to early style with vertical C-channel supports - Relocated rear traction motor cables closer to fuel tank - Added end-mounted fuel gauge on fuel tank 2020-11-18 - Revised horn 2021-01-05 - Increased corner handrail thickness 2021-01-23 - Relocated fuel cutoff switch to within side sill 2021-02-11 - Pipe behind rear truck - Fuel filler - Added safety valve to front air reservoir (left side) - Small pipe clips above fuel tank (right side) - Longer handrail stanchion in front of cab (right side) 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Horn manifold and back cap dimensions | |
GE B23-7 ← → | 1978-08 | 2a | (F.L.) SCL 5140-5153 | 2023-02-18Revision history:
2018-11-21 - Revised air reservoir height and brackets - Changed air reservoir brackets to early style with vertical C-channel supports - Added end-mounted fuel gauge on fuel tank 2020-11-18 - Revised horn 2021-01-05 - Increased corner handrail thickness 2021-02-11 - Pipe behind rear truck - Added sloped plate under frame behind draft gear - Fuel filler - Added safety valve to front air reservoir (left side) - Small pipe clips above fuel tank (right side) - Longer handrail stanchion in front of cab (right side) 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Horn manifold and back cap dimensions 2023-02-18 - Bottom taper on stairwell side sheet | |
GE B30-7 ← → | 1980-03 | 2c | SCL 5500-5509 | 2023-02-18Revision history:
2018-01-19 - Added missing section of panel near front steps 2018-11-21 - Revised air reservoir height and brackets - Added end-mounted fuel gauge on fuel tank 2021-01-05 - Increased corner handrail thickness 2021-02-11 - Pipe behind rear truck - Added sloped plate under frame behind draft gear - Rear headlight and numberboards - Fuel filler - Added safety valve to front air reservoir (left side) - Small pipe clips above fuel tank (right side) - Longer handrail stanchion in front of cab (right side) 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Horn manifold and back cap dimensions 2023-02-18 - Bottom taper on stairwell side sheet | |
GE B30-7 ← → | 1980-05 | 2d | SCL 5510-5516 | 2023-02-18Revision history:
2018-01-19 - Added missing section of panel near front steps 2018-11-21 - Revised air reservoir height and brackets - Added end-mounted fuel gauge on fuel tank 2021-01-05 - Increased corner handrail thickness 2021-02-11 - Pipe behind rear truck - Added sloped plate under frame behind draft gear - Rear headlight and numberboards - Fuel filler - Added safety valve to front air reservoir (left side) - Small pipe clips above fuel tank (right side) - Longer handrail stanchion in front of cab (right side) 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Horn manifold and back cap dimensions 2023-02-18 - Bottom taper on stairwell side sheet | |
GE BQ23-7 ← → | 1978-11 - 1979-02 | 1d | SCL 5130-5139 | 2023-02-18Revision history:
2018-01-15 - Minor correction to sand line above right rear truck 2018-11-21 - Revised air reservoir height and brackets - Changed air reservoir brackets to early style with vertical C-channel supports - Relocated rear traction motor cables closer to fuel tank - Added end-mounted fuel gauge on fuel tank 2019-07-22 - Removed panel above front steps 2020-11-18 - Revised horn 2021-01-05 - Increased corner handrail thickness 2021-02-11 - Pipe behind rear truck - Added sloped plate under frame behind draft gear - Fuel filler - Added safety valve to front air reservoir (left side) - Small pipe clips above fuel tank (right side) - Added underframe box / conduit behind top step (left side) 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Horn manifold and back cap dimensions 2023-02-18 - Bottom taper on stairwell side sheet | |
GE C30-7 ← → | 1979-03 | 1b | (F.L.) SCL 7016-7024 | Adirondack trucks | 2023-02-18Revision history:
2018-11-22 - Revised air reservoir height and brackets - Changed air reservoir brackets to early style with vertical C-channel supports - Added end-mounted fuel gauge on fuel tank 2020-11-18 - Revised horn 2021-01-04 - Increased corner handrail thickness 2021-02-12 - Added safety valve to front air reservoir (left side) - Added notch and square hole at top of bolted strip behind front air intake (right side) - Fuel filler - Longer handrail stanchion in front of cab (right side) 2022-08-03 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Horn manifold and back cap dimensions 2023-02-18 - Bottom taper on stairwell side sheet |
GE C30-7 ← → | " | " | " | Rockwell trucks | 2023-02-18Revision history:
2018-11-22 - Revised air reservoir height and brackets - Changed air reservoir brackets to early style with vertical C-channel supports - Added end-mounted fuel gauge on fuel tank 2020-11-18 - Revised horn 2021-01-04 - Increased corner handrail thickness 2021-02-12 - Added safety valve to front air reservoir (left side) - Added notch and square hole at top of bolted strip behind front air intake (right side) - Fuel filler - Longer handrail stanchion in front of cab (right side) 2022-08-03 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Horn manifold and back cap dimensions 2023-02-18 - Bottom taper on stairwell side sheet |
GE C30-7 ← → | 1979-08 | 1c | (F.L.) SCL 7025-7031 | 2023-02-18Revision history:
2018-11-22 - Revised air reservoir height and brackets - Added end-mounted fuel gauge on fuel tank 2021-01-04 - Increased corner handrail thickness 2021-01-27 - Removed partial valve from air line behind front steps 2021-02-12 - Added safety valve to front air reservoir (left side) - Added notch and square hole at top of bolted strip behind front air intake (right side) - Fuel filler - Longer handrail stanchion in front of cab (right side) 2022-08-03 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Horn manifold and back cap dimensions 2023-02-18 - Bottom taper on stairwell side sheet | |
GE C30-7 ← → | 1980-03 | 2a | (F.L.) SCL 7052-7061 | 2023-02-18Revision history:
2018-11-22 - Revised air reservoir height and brackets - Added end-mounted fuel gauge on fuel tank 2021-01-04 - Increased corner handrail thickness 2021-01-27 - Removed partial valve from air line behind front steps 2021-02-12 - Added safety valve to front air reservoir (left side) - Added notch and square hole at top of bolted strip behind front air intake (right side) - Rear headlight and numberboards - Fuel filler - Longer handrail stanchion in front of cab (right side) 2022-08-03 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Horn manifold and back cap dimensions 2023-02-18 - Bottom taper on stairwell side sheet | |
GE C30-7 ← → | 1981-10 | 2c | (F.L.) SCL 7070-7094 | 2023-02-18Revision history:
2018-11-22 - Revised air reservoir height and brackets - Added end-mounted fuel gauge on fuel tank 2020-11-18 - Revised horn 2021-01-04 - Increased corner handrail thickness 2021-01-27 - Removed partial valve from air line behind front steps 2021-02-12 - Added safety valve to front air reservoir (left side) - Added notch and square hole at top of bolted strip behind front air intake (right side) - Rear headlight and numberboards - Fuel filler - Changed bolted strip / front hood doors to later-phase version - Longer handrail stanchion in front of cab (right side) - Revised seams under door behind cab 2022-08-03 - Coupler cut lever and pilot details - Corner handrail and step bolts - Horn manifold and back cap dimensions 2023-02-18 - Bottom taper on stairwell side sheet | |
GE U18B ← → | 1973-03 - 1973-05 | 2f | SCL 300-324 | FB-2 trucks | 2022-03-15Revision history:
2018-12-20 - Added water level sight glass on right rear of hood 2019-08-12 - Removed stray pixel from #2 axle (left side) 2020-01-25 - Revised hood doors behind cab (left side) 2020-02-11 - Corrected minor line glitch in front upper air intake (right side) 2020-12-31 - Increased corner handrail thickness 2021-02-04 - Fuel filler - Higher footboards 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets 2022-03-15 - Horn manifold and back cap dimensions |
GE U18B ← → | 1973-12 | 2g2 | SCL 250-261 | FB-2 trucks, small fuel tank | 2022-03-15Revision history:
2018-12-20 - Added water level sight glass on right rear of hood 2019-08-12 - Corrected line glitch on left front/right rear axles (exposed axle caps only) - Removed stray pixel from #2 axle (left side) 2020-02-11 - Corrected minor line glitch in front upper air intake (right side) 2020-12-31 - Increased corner handrail thickness 2021-02-04 - Fuel filler - Higher footboards 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets 2022-03-15 - Horn manifold and back cap dimensions |
GE U18B ← → | 1973-11 - 1974-11 | 2g2 | SCL 325-392 | Blomberg trucks | 2022-03-15Revision history:
2018-12-20 - Added water level sight glass on right rear of hood 2020-02-11 - Corrected minor line glitch in front upper air intake (right side) 2020-12-31 - Increased corner handrail thickness 2021-02-04 - Fuel filler - Higher footboards 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets 2022-03-15 - Horn manifold and back cap dimensions |
GE U33B ← → | 1967-12 - 1968-01 | 2a | SCL 1719-1734 | 2023-01-24Revision history:
2021-02-13 - Longer handrail stanchion in front of cab (right side) 2021-02-25 - Air intake screen 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Revised dynamic brake grids 2022-03-15 - Horn manifold and back cap dimensions 2023-01-24 - Added rear Gyralite | |
GE U33B ← → | 1968-10 | 2b2 | SCL 1735-1747 | 2022-03-15Revision history:
2021-02-04 - Added ATS shoe (right side) - Relocated antenna - Fuel filler 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2021-02-25 - Air intake screen 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Revised dynamic brake grids 2022-03-15 - Horn manifold and back cap dimensions | |
GE U36B ← → | 1970-05 - 1970-08 | 2c | SCL 1748-1777 | 2022-03-15Revision history:
2018-12-20 - Added water level sight glass on right rear of hood 2020-01-25 - Revised hood doors behind cab (left side) 2020-02-11 - Corrected minor line glitch in front upper air intake (right side) 2020-04-09 - Added speed recorders on every axle (left side) 2020-12-31 - Increased corner handrail thickness 2021-02-04 - Added ATS shoe (right side) - Fuel filler 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets 2022-03-15 - Horn manifold and back cap dimensions | |
GE U36B ← → | 1971-03 - 1971-04 | 2e | SCL 1778-1796 | 1784, 1788 and 1789 were Phase 2d | 2022-03-15Revision history:
2018-12-20 - Added water level sight glass on right rear of hood 2020-01-25 - Revised hood doors behind cab (left side) 2020-02-11 - Corrected minor line glitch in front upper air intake (right side) 2020-12-31 - Increased corner handrail thickness 2021-02-04 - Fuel filler 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets 2022-03-15 - Horn manifold and back cap dimensions |
GE U36B ← → | 1971-04 - 1971-08 | 2f | SCL 1797-1812 | 2022-03-15Revision history:
2018-12-20 - Added water level sight glass on right rear of hood 2020-01-25 - Revised hood doors behind cab (left side) 2020-02-11 - Corrected minor line glitch in front upper air intake (right side) 2020-12-31 - Increased corner handrail thickness 2021-02-04 - Fuel filler 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets 2022-03-15 - Horn manifold and back cap dimensions | |
GE U36B ← → | 1971-09 - 1971-12 | 2f | SCL 1814-1834 | 2022-03-15Revision history:
2018-12-20 - Added water level sight glass on right rear of hood 2020-01-25 - Revised hood doors behind cab (left side) 2020-02-11 - Corrected minor line glitch in front upper air intake (right side) 2020-12-31 - Increased corner handrail thickness 2021-02-04 - Fuel filler 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets 2022-03-15 - Horn manifold and back cap dimensions |
1:36 Drawings
Model | Built | Phase | Numbers | Notes |
---|---|---|---|---|
EMD GP38-2 ← → | 1979-07 - 1979-08 | 2b2 | (F.L.) CRR 6045; LN 6031-6044; SCL 6046-6050 | |
EMD GP38-2 ← → | 1980-03 | 2c1 | (F.L.) GA 6051-6052; SCL 6053-6054 | |
EMD GP38-2 ← → | 1980-10 - 1980-11 | 2c2 | (F.L.) SCL 6055-6065 | |
EMD MP15AC ← → | 1977-10 - 1978-08 | SCL 4000-4019, 4200-4224; LN 4225-4234 |
1:55 Drawings
Model | Phase | Numbers | Notes | Accuracy |
---|---|---|---|---|
EMD GP38-2 ← → | 1b2 | (F.L.) SCL 500-555 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38-2 ← → | 2a2, 2b2 | (F.L.) LN 6011-6044; SCL 6046-6050 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38-2 ← → | 2c1, 2c2 | (F.L.) SCL 6053-6065 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP40-2 ← → | 1a1 | (F.L.) SCL 1636-1656 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP40-2 ← → | 2c1 | (F.L.) LN 6600-6616; SCL 6617-6621 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP40M-3 ← → | TM 1170, 1177 | ex-SCL | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD45-2 ← → | SCL 2045-2059 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
GE B30-7 ← → | 2c | SCL 5500-5516 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE C30-7 ← → | 1 | (F.L.) SCL 7016-7031 | Adirondack FB-3 trucks | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
GE C30-7 ← → | " | " | Rockwell FB-3 trucks | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
GE C30-7 ← → | 2a | (F.L.) SCL 7052-7061 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE C30-7 ← ← → | 2b, 2c | (F.L.) LN 7062-7069; SCL 7070-7094 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE U18B ← → | 2g | SCL 325-392 | Blomberg trucks | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
GE U33B ← → | 2a | SCL 1719-1734 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE U33B ← → | 2b | SCL 1735-1747 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE U36B ← → | 2c | SCL 1748-1777 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE U36B ← → | 2e | SCL 1778-1796 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE U36B ← → | 2f | SCL 1814-1834 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
See also: