Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - SP

Selected scales:


See the Locomotive Phases section for phase descriptions.

1:18 Drawings

Model Built Phase Numbers Notes Last modified
EMD GP20
  
1960-08 1a SP 7234-7237 ex-EMDX 5625-5628; re# 4084-4087 2017-11-03
EMD GP20
  
1962-01 -
1962-04
2 SP 7200-7233 re# 4050-4083 2017-11-03
EMD GP30
  
1963-03 1d SP 7400-7407 re# SP 5010-5017
2019-07-31Revision history:

2016-02-27
- Corrected pilots, support plates and footboards (representing GP18-GP30 version rather than GP35 and later version)

2017-09-02
- Corrected minor line glitch on latches on first engine room door
- Revised coupler pockets
- Corrected mismatched hood seams behind conductor's side inertial air intake
- Revised center radiator fan (changed to cap-top instead of open-top)

2017-10-07
- Revised bottom hatches on hood ends
- Removed bottom hatch latch hooks on short hood

2019-07-31
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors narrowed by 0.75"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
EMD GP35
  
1963-12 -
1964-02
1a1 SP 7408-7455;
SSW 760-763
re# SP 6520-6567,
SSW 6500-6503
2019-01-21Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
EMD GP35
  
1964-02 -
1964-03
1a2 SP 7456-7464 re# SP 6568-6576
2019-01-21Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
EMD GP35
  
1964-05 -
1964-06
1b1 SP 7465-7484 re# SP 6577-6596
2019-01-21Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
EMD GP35
  
1964-12 1b4 SP 7700-7712;
SSW 764-771
re# SP 6597-6609,
SSW 6504-6511
2019-01-21Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
EMD GP35
   
1965-02 -
1965-03
1c1, 1c2 SP 7713-7720, 7721-7727;
SSW 772-775, 776-779
re# SP 6610-6617,
6618-6624,
SSW 6512-6515,
6516-6519
2019-01-21Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
EMD GP35
  
1965-04 -
1965-06
1c2 SP 7728-7761 re# SP 6625-6658
2019-01-21Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
EMD GP35
  
" 1d " "
2020-01-18Revision history:

2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards

2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-01-18
- Added lift rings below radiator intakes
EMD GP35
  
1965-07 -
1965-11
2b SP 7762-7782;
SSW 780-781
re# SP 6659-6679,
SSW 6680-6681
2020-01-18Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2019-08-07
- Corrected line/crop issue at right of image

2020-01-18
- Added lift rings below radiator intakes
- Removed rear numberboards
- Added circular panels on long hood end
EMD GP60
  
1988-02 -
1988-04
2a SP 9600-9619
2019-08-10Revision history:

2013-03-05
- Corner handrails, pilot braces, rear end plate
- Traction motor cables

2014-02-15
- Truck shape and casting logo

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2014-11-15
- Revised inertial air intakes

2015-08-31
- Removed flag holders

2019-08-08
- Revised center hood door spacing
- Revised hood behind cab
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
EMD GP60
  
1988-08 -
1988-10
2a SSW 9620-9634
2019-08-10Revision history:

2013-01-26
- Blower duct, central air intake
- Dynamic brake housing
- Trucks
- Fans

2013-03-05
- Corner handrails, pilot braces, rear end plate
- Traction motor cables

2014-02-15
- Truck shape and casting logo

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2014-11-15
- Revised inertial air intakes

2015-08-31
- Removed flag holders

2019-08-08
- Revised center hood door spacing
- Revised hood behind cab
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
EMD GP60
  
1989-08 -
1989-10
2b SSW 9635-9664
2019-08-10Revision history:

2013-01-26
- Blower duct, central air intake
- Dynamic brake housing
- Trucks
- Fans

2013-03-05
- Corner handrails, pilot braces, rear end plate
- Traction motor cables

2014-02-15
- Truck shape and casting logo

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2014-11-15
- Moved rear lift ring from roof to side
- Revised inertial air intakes

2015-08-31
- Removed flag holders

2019-08-08
- Revised center hood door spacing
- Revised hood behind cab
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
EMD GP60
  
1991-04 -
1994-01
2d SP 9715-9794
2019-08-10Revision history:

2013-01-26
- Blower duct, central air intake
- Dynamic brake housing
- Trucks
- Fans

2013-03-05
- Corner handrails, pilot braces, rear end plate
- Traction motor cables

2014-02-15
- Truck shape and casting logo

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)

2014-11-15
- Moved rear lift ring from roof to side
- Revised inertial air intakes

2015-08-31
- Removed flag holders

2019-08-08
- Revised center hood door spacing
- Revised hood behind cab
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
EMD SD35
  
1964-12 -
1965-04
1b3 SP 4816-4844 2020-01-19
EMD SD35
  
" 1c " 2020-01-19
EMD SD40
    
1966-01 -
1966-05
1a1, 1a2, 1a3 SP 8400-8410,
8411-8429, 8430-8478
2019-08-10Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake fans
- Removed extra bolt on exhaust stack housing (SD40 right-side views)

2018-02-25
- Removed ballast plate above fuel tank

2018-11-14
- Added circular vent on top of short hood

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch

2019-01-23
- Relocated dynamic brakes
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear

2019-08-10
- Added missing grabiron ahead of right-side battery box
EMD SD45
  
1966-08 -
1966-09
1a3 SP 8800-8844
2019-08-10Revision history:

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box
GE AC4400CW
   
1995-04 -
1995-08
1a3 SP 100-300, 301-352 2017-02-18
GE AC4400CW
  
1995-10 1a4 SP 353-378 2017-02-18
GE B39-8
  
1987-08 -
1987-09
SP 8000-8039 2015-08-06
GE Dash 9-44CW
  
1994-05 -
1994-12
1c SP 8100-8200
2017-09-30Revision history:

2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)

2017-02-25
- Replaced 2 X-panels ahead of front air intake with single larger X-panel

2017-09-30
- Removed incorrect line under bell

1:36 Drawings

Model Built Phase Numbers Notes
ALCO RS-32
  
1962-03 -
1962-04
SP 7300-7309
EMD GP40-2
  
1978-02 -
1979-02
2a1, 2a2 SP 7608-7627;
SSW 7628-7657
EMD GP40-2
  
1980-03 2c1 SP 7658-7677
EMD GP40-2
  
1984-10 -
1984-11
3 SP 7240-7247;
SSW 7248-7273
EMD GP40X
  
1978-02 SP 7200-7201, 7230-7231 HT-B trucks
EMD GP40X
  
" " as modified
EMD MP15AC
  
1975-08 -
1975-1
SP 2702-2759
EMD SD38-2
  
1973-04 1a SP 2971-2976
EMD SD39
  
1968-08 -
1968-09
SP 5300-5308
EMD SD39
  
1968-09 -
1968-10
SP 5309-5317
EMD SD39
  
1970-04 SP 5318-5325
EMD SD40T-2
  
1974-06 -
1974-07
1a SP 8300-8306, 8350-8356 116" short hood
EMD SD40T-2
  
1978-01 -
1978-04
2a SP 8307-8321, 8357-8371;
SSW 8322-8326, 8372-8376
123" short hood
EMD SD40T-2
  
1978-01 -
1978-02
2a SP 8489-8498
EMD SD40T-2
  
1978-11 -
1979-03
2a SP 8499-8573
EMD SD40T-2
  
1979-03 -
1979-06
2b SP 8327-8341, 8377-8391 123" short hood
EMD SD40T-2
  
1980-03 -
1980-07
2c SP 8230-8299
EMD SD45T-2
  
1972-02 -
1972-06
SP 9166-9260, 9302-9314
EMD SD45T-2
  
1974-01 -
1974-03
SP 9315-9329
EMD SD45T-2
  
1974-01 -
1974-03
SP 9330-9343
EMD SD45T-2
  
1974-01 -
1974-03
SP 9344-9370
EMD SD50
  
1984-08 -
1984-09
2b2 DRGW 5501-5517
EMD SD50
  
" " "
(SP/UP version)
ex-DRGW
EMD SD70M
  
1994-04 -
1994-05
1a SP 9800-9824
EMD SW1500
  
1968-06 -
1969-11
2a SP 2493-2510, 2523-2552;
SSW 2511-2522
Flexicoil trucks
EMD SW1500
  
1970-01 -
1970-04
2b1 SP 2553-2578;
SSW 2579-2582
Flexicoil trucks
EMD SW1500
  
1971-10 -
1971-12
2c SSW 2583-2590;
SP 2591-2612
Flexicoil trucks
EMD SW1500
  
1972-04 -
1973-05
3b SP 2613-2689 Flexicoil trucks
GE B30-7
  
1978-01 -
1978-04
1b SP 7800-7823
GE B30-7
  
1979-02 -
1979-05
1b SP 7824-7853
GE B30-7
  
1979-02 -
1979-05
2b SP 7854-7883

1:55 Drawings

Model Phase Numbers Notes Accuracy
EMD GP20
  
2 SP 7200-7233
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP30
  
1d SSW 750-759;
SP 7400-7407
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP35
  
1a1 SSW 6500-6503;
SP 6520-6567
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP35
  
1a2 SP 6568-6576
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP35
  
1b1 SP 6577-6596
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP35
  
1b3 SSW 6504-6511;
SP 6597-6609
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP35
  
1c SSW 6512-6519;
SP 6610-6653
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP35
  
1d SP 6654-6658
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP35
  
2b SP 6659-6679;
SSW 6680-6681
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP38-2
  
CP 4521 ex-SP GP40X rebuild
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP38-2
  
2c SP 4800-4844
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40-2
  
2a1, 2a2 SP 7608-7627;
SSW 7628-7657
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40-2
  
" " As modified
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40-2
  
2c1 SP 7658-7677, 7940-7959
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40-2
  
" " As modified
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40-2
  
3 SP 7240-7247;
SSW 7248-7273
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40-2
  
" " As modified
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40X
  
SP 7200-7201, 7230-7231
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP40X
  
"
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP60
  
2a SP 9600-9619
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP60
   
2c, 2d DRGW 3154-3156;
SSW 9665-9714;
SP 9715-9794
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD SD40
  
1a1 SP 8400-8427
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD SD40
  
1a3 SP 8428-8478
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD SD40R
  
some of SP 7300-7385
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD SD45T-2
  
SP 9166-9260, 9302-9313;
SSW 9157-9165, 9261-9301
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD SD45T-2
  
SP 9315-9329
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD SD45T-2
  
SP 9330-9370
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD SD45X
 
SP 9500-9502;
EMDX 4201-4203
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE AC4400CW
  
1a SP 100-378
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE B30-7
  
2b SP 7855-7883
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE B36-7
  
3 SP 7754-7769
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE B39-8
  
SP 8000-8039
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE U33C
  
2a SP 8600-8629 Adirondack trucks
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE U33C
  
" " GSC trucks
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE U33C
  
2c SP 8630-8687 Adirondack trucks
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE U33C
  
" " GSC trucks
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE U33C
  
2f SP 8688-8777 Adirondack trucks
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE U33C
  
" " GSC trucks
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE U33C
  
2g1, 2g2 SP 8778-8796 Adirondack trucks
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE U33C
  
" " GSC trucks
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
GE U33C
  
2h1 SP 8585-8599
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)