Drawings > Undecorated Drawings - By Type > EMD SD40
Undecorated Drawings - EMD SD40
| Selected scales: |
1:18 Drawings
| Model | Built | Phase | Numbers | Qty | Notes | Last modified |
|---|---|---|---|---|---|---|
| EMD SD40 ← → | 1966-03 - 1966-04 | 1a3 | ATSF 1700-1719 | 20 | 2022-03-21Revision history:
2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Corrected pipe overlapping bell 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD40 ← → | 1971-10 - 1971-11 | 2c | BN 6300-6324 | 25 | 2022-03-29Revision history:
2017-03-19 - Added cab door stops 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2018-02-25 - Removed ballast plate above fuel tank 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD40 ← → | 1967-10 - 1968-04 | 2a3 | CBQ (CS) 875-887 | 13 | 2023-01-24Revision history:
2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions 2023-01-24 - Removed end drop steps and handrail chains | |
| EMD SD40 ← → | 1966-08 - 1966-09 | 1a3 | CGW 401-409 | 9 | 2022-03-21Revision history:
2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2020-12-29 - Front fuel tank support (left side) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD40 ← → | 1966-07 - 1966-08 | 1a3 | (C.S.) CO 7450-7469 | 20 | 2022-03-21Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2018-01-02 - Added missing section of bell 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Corrected pipe overlapping bell 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2020-12-29 - Front fuel tank support (left side) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD40 ← → | 1967-05 | 1b2 | (C.S.) BO 7482-7494; CO 7475-7481 | 13 + 7 | 2022-03-21Revision history:
2017-05-16 - Added missing speed recorder cable 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2018-01-02 - Added missing section of bell 2018-02-25 - Removed ballast plate above fuel tank 2018-10-05 - Updated handrail stanchions with even bottoms 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Corrected pipe overlapping bell 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2021-02-04 - Walkway blower duct and side handrail jog position 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD40 ← → | 1969-04 | 2b1 | (C.S.) BO 7497-7500; CO 7501-7506 | 4 + 6 | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2018-02-25 - Removed ballast plate above fuel tank 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions 2022-12-05 - Added sand pipes running below walkway sideframe | |
| EMD SD40 ← → | 1970-06 - 1970-07 | 2b2 | (C.S.) CO 7507-7526 | 20 | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2018-02-25 - Removed ballast plate above fuel tank 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions 2022-12-05 - Added sand pipes running below walkway sideframe | |
| EMD SD40 ← → | 1971-03 | 2c | (C.S.) CO 7527-7536 | 10 | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2018-02-25 - Removed ballast plate above fuel tank 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions 2022-12-05 - Added sand pipes running below walkway sideframe | |
| EMD SD40 ← → | 1969-08 - 1970-01 | 2b1 | GTW 5900-5920 | 21 | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Removed extra bolt on exhaust stack housing 2018-10-17 - Removed rear numberboards 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-12-05 - Added sand pipes running below walkway sideframe | |
| EMD SD40 ← → | 1970-09 | 2b2 | GTW 5921-5929 | 9 | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Removed extra bolt on exhaust stack housing 2018-10-17 - Removed rear numberboards 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-12-05 - Added sand pipes running below walkway sideframe | |
| EMD SD40 ← → | 1967-12 | 2a2 | IC 6000-6005 | 6 | 2022-03-29Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Removed extra bolt on exhaust stack housing 2018-02-25 - Removed ballast plate above fuel tank 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD40 ← → | 1966-10 - 1966-12 | 1b1 | KCS 600-613 | 14 | 2022-03-21Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD40 ← → | 1966-06 - 1966-09 | 1a3 | LN 1225-1228 | 4 | 2022-03-21Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2018-02-25 - Removed ballast plate above fuel tank - Revised fuel gauge - Removed inner sand lines 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points | |
| EMD SD40 ← → | 1969-04 | 2b1 | LN 1229-1233 | 5 | 2022-03-29Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2018-02-25 - Removed ballast plate above fuel tank - Revised fuel gauge - Removed inner sand lines 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack 2019-07-22 - Changed to earlier handrail stanchions (bottoms not lined up) 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points | |
| EMD SD40 ← → | 1970-04 - 1970-09 | 2b2 | LN 1234-1248 | 15 | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2018-02-25 - Removed ballast plate above fuel tank - Revised fuel gauge 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack 2019-07-22 - Changed to earlier handrail stanchions (bottoms not lined up) 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-12-05 - Added sand pipes running below walkway sideframe | |
| EMD SD40 ← → | 1971-05 | 2c | LN 1249-1258 | 10 | 2022-12-05Revision history:
2017-01-04 - Removed hand brake 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2018-02-25 - Removed ballast plate above fuel tank - Revised fuel gauge 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-12-05 - Added sand pipes running below walkway sideframe | |
| EMD SD40 ← → | 1968-05 - 1968-06 | 2a3 | NDeM 8500-8521 | 22 | Export (Mexico) | 2022-11-08 |
| EMD SD40 ← → | 1971-11 - 1971-12 | 3 | NDeM 8536-8575 | 40 | Export (Mexico) | 2022-12-05Revision history:
2022-12-05 - Added sand pipes running below walkway sideframe |
| EMD SD40 ← → | 1966-05 - 1966-06 | 1a3 | NW 1580-1609 | 30 | High short hood | 2022-03-21Revision history:
2017-05-16 - Added grabiron at top of short hood 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Corrected glitch in short hood headlight - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions |
| EMD SD40 ← → | 1971-05 | 2c | NW 1610-1624 | 15 | High short hood | 2022-12-05Revision history:
2017-05-16 - Added grabiron at top of short hood 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack 2019-08-10 - Corrected glitch in short hood headlight - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions 2022-12-05 - Added sand pipes running below walkway sideframe |
| EMD SD40 ← → | 1970-12 - 1971-02 | 2b2 | PC 6240-6284 | 45 | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2018-02-25 - Removed ballast plate above fuel tank 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions 2022-12-05 - Added sand pipes running below walkway sideframe | |
| EMD SD40 ← → → → | 1966-02 - 1966-03 | 1a2, 1a3 | PRR 6040-6104 | 65 | 2022-03-21Revision history:
2017-05-30 - Removed rear flag holder 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2018-01-02 - Added missing section of bell 2018-02-25 - Removed ballast plate above fuel tank 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2020-12-29 - Corrected mismatched front right handrail (PRR 6040-6054) 2021-01-02 - Added MU connector on end handrails 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD40 ← → | 1971-04 | 2c | SOU 3170-3185 | 16 | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-12-05 - Added sand pipes running below walkway sideframe | |
| EMD SD40 ← → | 1972-01 | 3 | SOU 3186-3200 | 15 | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-12-05 - Added sand pipes running below walkway sideframe | |
| EMD SD40 ← ← → → | 1966-01 - 1966-05 | 1a1, 1a2, 1a3 | SP 8400-8410, 8411-8429, 8430-8478 | 11 + 19 + 49 | 2022-11-08Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing (SD40 right-side views) 2018-02-25 - Removed ballast plate above fuel tank 2018-11-14 - Added circular vent on top of short hood 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-11-08 - Fuel filler | |
| EMD SD40 ← → | 1968-05 - 1968-06 | 2a3 | SP 8479-8488 | 10 | 2022-12-11Revision history:
2022-12-11 - Air pipe routing through plow, behind steps and through underframe | |
1:36 Drawings
| Model | Built | Phase | Numbers | Notes |
|---|---|---|---|---|
| EMD SD40 ← → | 1966-06 | 1a3 | ASAB 506 | |
| EMD SD40 ← → | 1968-04 | 2a3 | CBQ 879-887 | |
| EMD SD40 ← → | 1966-09 | 1a3 | CRR 3000-3007 | |
| EMD SD40 ← → | 1968-08 - 1969-02 | 2b | CRR 3008-3014 | |
| EMD SD40 ← → | 1971-06 | 2c | CRR 3015-3024 | |
| EMD SD40 ← → | 1966-07 - 1966-08 | 1a3 | (C.S.) CO 7450-7469 | |
| EMD SD40 ← → | 1967-05 | 1b2 | (C.S.) BO 7482-7494; CO 7475-7481 | |
| EMD SD40 ← → | 1969-04 | 2b1 | (C.S.) BO 7497-7500; CO 7501-7506 | |
| EMD SD40 ← → | 1970-06 - 1970-07 | 2b2 | (C.S.) CO 7507-7526 | |
| EMD SD40 ← → | 1971-03 | 2c | (C.S.) CO 7527-7536 | |
| EMD SD40 ← → | 1970-04 - 1970-05 | 2b | DEEX 001-006 | |
| EMD SD40 ← → | 1972-07 | 3 | DEEX 013-017 | |
| EMD SD40 ← → | 1966-02 - 1966-03 | 1a2 | PRR 6040-6104 | |
| EMD SD40 ← → | 1971-04 - 1972-01 | 2c/3 | SOU 3170-3200 | |
1:55 Drawings
| Model | Phase | Numbers | Notes | Accuracy |
|---|---|---|---|---|
| EMD SD40 ← → | 2c | BN 6300-6324 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 1a1, 1a3 | CNW 867-892 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 1a3 | CRR 3000-3007 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 1a3 | (C.S.) CO 7450-7469 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 1b2 | (C.S.) BO 7482-7494, CO 7475-7481 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 2b1 | (C.S.) BO 7497-7500, CO 7501-7506 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 2b2 | (C.S.) CO 7507-7526 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 2c | (C.S.) CO 7527-7536 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 1a3 | GMO 901-921 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 2a2 | IC 6000-6005 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 1b1 | KCS 600-613 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 2b1, 2b2 | KCS 614-627 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 2c | KCS 628-636 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 2b2 | PC 6240-6284 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 1a2, 1a3 | PRR 6040-6104 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 1a1 | SP 8400-8427 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 1a3 | SP 8428-8478 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 1a3 | UP 3000-3039 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 1b1 | UP 3048-3082 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 2c | UP 3083-3122 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD40 ← → | 1a3 | WM 7470-7474 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
See also: