Model
| Built
| Phase
| Numbers
| Qty
| Notes
| Last modified
|
EMD SD70I ← →
| 1995-07 - 1995-11
| 1d2
| CN 5600-5625
| 26
|
| 2023-01-19Revision history:
2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
2022-12-10
- Cab sub-base door proportions (right side)
2022-12-21
- Fuel tank length
2023-01-19
- Hood door and radiator intake height
|
|
EMD SD70M-2 ← →
| 2007-07 - 2007-11
| 2e1
| CN 8800-8849
| 50
|
| 2022-03-30Revision history:
2016-10-08
- Added missing rear platform lights on the hood end
- Center hood door height
- Large rear hood intake height
2017-09-19
- Revised truck traction pin (near center axle on trucks)
- Added minor truck details (bolts under axles and pins at radial-steering arm ends)
- Smaller radiator fan diameter and spacing, fans moved rearward
- Added missing section of air pipe behind front steps (left side)
- Removed seam at rear of cab (left side)
2017-11-11
- Corrected minor glitch in front truck traction pin (left side)
2017-12-17
- Revised cables/pipes under back of cab (right side)
2020-12-22
- Increased handrail thickness
2021-01-11
- Fuel tank height and gap from underframe
2022-01-21
- Added missing portion of brake levers near brake cylinders
- Corrected line glitch above cab nose door (right side)
2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
|
|
EMD SD70M-2 ← →
| "
| "
| "
| "
| as modified
| 2022-03-30Revision history:
2016-10-08
- Added missing rear platform lights on the hood end
- Center hood door height
- Large rear hood intake height
2017-09-19
- Revised truck traction pin (near center axle on trucks)
- Added minor truck details (bolts under axles and pins at radial-steering arm ends)
- Smaller radiator fan diameter and spacing, fans moved rearward
- Added missing section of air pipe behind front steps (left side)
- Removed seam at rear of cab (left side)
2017-11-11
- Corrected minor glitch in front truck traction pin (left side)
2017-12-17
- Revised cables/pipes under back of cab (right side)
2020-12-22
- Increased handrail thickness
2021-01-11
- Fuel tank height and gap from underframe
2022-01-21
- Added missing portion of brake levers near brake cylinders
- Corrected line glitch above cab nose door (right side)
2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
|
|
EMD SD70M-2 ← →
| 2008-11 - 2010-03
| 2e3
| CN 8850-8914
| 65
|
| 2022-03-30Revision history:
2016-10-08
- Added missing rear platform lights on the hood end
- Center hood door height
- Large rear hood intake height
- Revised intake under radiators (left side)
2017-09-19
- Revised truck traction pin (near center axle on trucks)
- Added minor truck details (bolts under axles and pins at radial-steering arm ends)
- Smaller radiator fan diameter and spacing, fans moved rearward
- Added missing section of air pipe behind front steps (left side)
2017-11-11
- Corrected minor glitch in front truck traction pin (left side)
2017-12-17
- Revised cables/pipes under back of cab (right side)
- Revised handbrake (changed from Phase 2e2 to 2e3)
2020-12-22
- Increased handrail thickness
2021-01-11
- Fuel tank height and gap from underframe
2022-01-21
- Added missing portion of brake levers near brake cylinders
- Corrected line glitch above cab nose door (right side)
2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
|
|
EMD SD70M-2 ← →
| 2010-10 - 2011-02
| 2f
| CN 8915-8964
| 50
|
| 2022-03-30Revision history:
2016-10-08
- Added missing rear platform lights on the hood end
- Center hood door height
- Large rear hood intake height
- Revised intake under radiators (left side)
2017-09-19
- Revised truck traction pin (near center axle on trucks)
- Added minor truck details (bolts under axles and pins at radial-steering arm ends)
- Smaller radiator fan diameter and spacing, fans moved rearward
- Added missing section of air pipe behind front steps (left side)
2017-11-11
- Relocated hole below handbrake wheel (right side)
- Corrected minor glitch in front truck traction pin (left side)
2017-12-17
- Revised cables/pipes under back of cab (right side)
2020-12-22
- Increased handrail thickness
2021-01-11
- Fuel tank height and gap from underframe
2022-01-21
- Added missing portion of brake levers near brake cylinders
- Corrected line glitch above cab nose door (right side)
2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
|
|
EMD SD75I ← → →
| 1996-05 - 1996-12
| 1d2
| CN 5626-5645, 5646-5730
| 20 + 85
|
| 2023-01-19Revision history:
2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
2022-12-10
- Cab sub-base door proportions (right side)
2022-12-21
- Fuel tank length
2023-01-19
- Hood door and radiator intake height
|
|
EMD SD75I ← →
| 1997-08 - 1999-07
| 1e
| CN 5731-5800; ONT 2100-2105
| 70 + 6
|
| 2023-01-19Revision history:
2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
2022-07-12
- Axle shock strut locations
2022-12-10
- Cab sub-base door proportions (right side)
- Added cab side seam
2022-12-21
- Fuel tank length
2023-01-19
- Hood door and radiator intake height
|
|
GE Dash 9-44CW ← →
| 2004-01 - 2004-02
| 2h
| CN 2200-2205
|
| CN Class EF-644g
| 2022-11-12Revision history:
2014-02-22
- Truck casting logo and text
- Short hood height
2015-07-08
- Corrected air reservoir length
- Added missing sand hose in front underframe
- Added missing brake line on truck near brake chain (left side)
- Corrected brake lines
2015-07-21
- Revised vertical bars in dynamic brake intakes
2016-02-20
- Added traction pin in center of trucks
2017-01-23
- Piping behind fuel tank
2017-01-25
- Revised cab side window size and location
2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-12
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added numberboard seam
|
|
GE Dash 9-44CW ← →
| 1997-02 - 1998-02
| 2b
| CN 2523-2562, 2563-2602
|
| CN Class EF-644b, c
| 2022-11-12Revision history:
2015-07-08
- Corrected air reservoir length
- Added missing sand hose in front underframe
- Added missing brake line on truck near brake chain (left side)
- Corrected brake lines
2015-07-21
- Revised vertical bars in dynamic brake intakes
2016-02-20
- Added traction pin in center of trucks
2017-01-23
- Piping behind fuel tank
2017-01-25
- Revised cab side window size and location
2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-12
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added numberboard seam
|
|
GE Dash 9-44CW ← →
| 2001-01 - 2002-09
| 2g
| CN 2603-2642, 2643-2672
|
| CN Class EF-644d, e
| 2022-11-12Revision history:
2015-07-08
- Corrected air reservoir length
- Added missing sand hose in front underframe
- Added missing brake line on truck near brake chain (left side)
- Corrected brake lines
2015-07-21
- Revised vertical bars in dynamic brake intakes
2016-02-20
- Added traction pin in center of trucks
2017-01-23
- Piping behind fuel tank
2017-01-25
- Revised cab side window size and location
2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-12
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added numberboard seam
|
|
GE Dash 9-44CW ← →
| 2004-01 - 2004-02
| 2h
| CN 2673-2696
|
| CN Class EF-644f
| 2022-11-12Revision history:
2014-02-22
- Truck casting logo and text
- Short hood height
2015-07-08
- Corrected air reservoir length
- Added missing sand hose in front underframe
- Added missing brake line on truck near brake chain (left side)
- Corrected brake lines
2015-07-21
- Revised vertical bars in dynamic brake intakes
2016-02-20
- Added traction pin in center of trucks
2017-01-23
- Piping behind fuel tank
2017-01-25
- Revised cab side window size and location
2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-12
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added numberboard seam
|
|
GE Dash 9-44CW ← →
| 2004-06 - 2004-09
| 2h
| CN (IC) 2697-2726
|
| CN Class EF-644h
| 2022-11-12Revision history:
2014-02-22
- Truck casting logo and text
- Short hood height
2015-07-08
- Corrected air reservoir length
- Added missing sand hose in front underframe
- Added missing brake line on truck near brake chain (left side)
- Corrected brake lines
2015-07-21
- Revised vertical bars in dynamic brake intakes
2016-02-20
- Added traction pin in center of trucks
2016-11-06
- Revised panel under cab on conductor's side
2017-01-23
- Piping behind fuel tank
2017-01-25
- Revised cab side window size and location
2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-12
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added numberboard seam
|
|
GE Dash 9-44CWL ← →
| 1994-12
| 1d
| CN 2500-2522
|
| CN Class EF-644a
| 2022-11-12Revision history:
2015-07-21
- Revised vertical bars in dynamic brake intakes
2015-09-07
- Center hood roof & side panels
2016-02-20
- Added traction pin in center of trucks
2017-01-25
- Revised cab side window size and location
2017-02-08
- Added empty handbrake chain bracket to front right truck
- Corrected location of hinges on first 2 hood doors under front air intake (left side)
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)
2017-02-25
- Replaced 2 X-panels ahead of front air intake with single larger X-panel
2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions
- Added / revised X-panels in front hood section
2022-11-12
- Coupler cut lever and pilot details
- Corner handrail and step bolts
|
|
GE ES44AC ← →
| 2012-11 - 2012-12
| 2f1
| CN 2800-2834
|
|
| 2022-11-29Revision history:
2019-08-12
- Corrected minor transparency issue in radiators (left side)
2020-01-14
- Revised grabirons behind cab (left side)
- Revised wide handrail stanchions
2020-05-24
- Moved cab mirror rearward (right side)
2021-01-12
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-01-09
- Added numberboard seam
- Corrected line glitch on right front / left rear traction motor air duct
- Added missing sight glass under right side radiators
2022-11-12
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added missing truck brake piping (left side)
- Narrower steps
2022-11-28
- Corner step height
- Added AEI tag above left rear truck
|
|
GE ES44AC ← →
| 2012-12 - 2013-11
| 2f2
| CN 2835-2909
|
|
| 2022-11-29Revision history:
2019-08-12
- Corrected minor transparency issue in radiators (left side)
2020-01-14
- Revised grabirons behind cab (left side)
- Revised wide handrail stanchions
- Thinner side handrails
2020-05-24
- Moved cab mirror rearward (right side)
2021-01-12
- Increased corner and side handrail thickness
- Revised end handrail stanchions
2022-01-09
- Added numberboard seam
- Corrected line glitch on right front / left rear traction motor air duct
- Added missing sight glass under right side radiators
2022-11-12
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added missing truck brake piping (left side)
- Narrower steps
2022-11-28
- Corner step height
- Added AEI tag above left rear truck
|
|
GE ES44AC ← →
| 2014-12 - 2019-11
| 2g
| CN 2910-2999, 3800-3912
|
|
| 2022-11-29Revision history:
2020-01-14
- Revised grabirons behind cab (left side)
- Revised wide handrail stanchions
- Thinner side handrails
2020-05-24
- Moved cab mirror rearward (right side)
2021-01-12
- Increased corner and side handrail thickness
- Revised end handrail stanchions
2022-01-09
- Added numberboard seam
- Corrected line glitch on right front / left rear traction motor air duct
- Added missing sight glass under right side radiators
2022-11-12
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added missing truck brake piping (left side)
- Narrower steps
2022-11-28
- Corner step height
- Added AEI tag above left rear truck
|
|
GE ES44DC ← →
| 2006-01 - 2006-02
| 1c
| CN 2220-2254
|
| CN Class EF-644j
| 2022-11-29Revision history:
2013-12-07
- Sand brackets
- Front grabirons
- Traction motor cables
- Left cab subbase
2014-02-22
- Truck casting logo and text
- Short hood height
2015-07-08
- Added missing brake line on truck near brake chain (left side)
- Corrected air reservoir length
- Added missing sand hose in front underframe (right side)
2016-02-20
- Added traction pin in center of trucks
2016-11-06
- Revised panel under cab on conductor's side
2016-11-17
- Lowered latch on hood door below exhaust stack (right side)
2017-01-25
- Revised cab side window size and location (slightly shorter; moved slightly upward)
- Added 4 holes behind left front jacking pad
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)
2018-03-26
- Revised door width/spacing under central air intake
- Added 2 holes below front cab sub-base door
2021-01-06
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-13
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added numberboard seam
2022-11-28
- Added AEI tag above left rear truck
|
|
GE ES44DC ← →
| 2007-09 - 2007-11
| 2b
| CN 2255-2289
|
| CN Class EF-644k, l
| 2022-11-29Revision history:
2013-12-07
- Sand brackets
- Front grabirons
- Traction motor cables
- Left cab subbase
2014-02-22
- Truck casting logo and text
- Short hood height
2015-07-08
- Added missing brake line on truck near brake chain (left side)
- Corrected air reservoir length
- Added missing sand hose in front underframe (right side)
2016-02-20
- Added traction pin in center of trucks
2016-11-06
- Revised panel under cab on conductor's side
2016-11-17
- Lowered latch on hood door below exhaust stack (right side)
2017-01-25
- Revised cab side window size and location (slightly shorter; moved slightly upward)
- Added 4 holes behind left front jacking pad
2017-02-08
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)
2018-03-26
- Revised door width/spacing under central air intake
- Added 2 holes below front cab sub-base door
2021-01-06
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-13
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added numberboard seam
2022-11-28
- Added AEI tag above left rear truck
|
|
GE ES44DC ← →
| 2008-02 - 2008-03
| 2c
| CN 2290-2309
|
| CN Class EF-644l
| 2022-11-29Revision history:
2013-12-07
- Sand brackets
- Front grabirons
- Traction motor cables
- Left cab subbase
2014-02-22
- Truck casting logo and text
- Short hood height
2015-07-08
- Added missing brake line on truck near brake chain (left side)
- Corrected air reservoir length
- Added missing sand hose in front underframe (right side)
2016-02-20
- Added traction pin in center of trucks
2016-11-06
- Revised panel under cab on conductor's side
2016-11-17
- Lowered latch on hood door below exhaust stack (right side)
2017-01-25
- Revised cab side window size and location (slightly shorter; moved slightly upward)
- Added 4 holes behind left front jacking pad
2017-02-08
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)
2018-03-26
- Revised door width/spacing under central air intake
- Added 2 holes below front cab sub-base door
2021-01-06
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-13
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added numberboard seam
2022-11-28
- Added AEI tag above left rear truck
|
|
GE ES44DC ← →
| 2010
| 2e
| CN 2310-2344
|
| CN Class EF-644m
| 2022-11-29Revision history:
2013-12-07
- Sand brackets
- Front grabirons
- Traction motor cables
- Left cab subbase
2014-02-22
- Truck casting logo and text
- Short hood height
2015-07-08
- Added missing brake line on truck near brake chain (left side)
- Corrected air reservoir length
- Added missing sand hose in front underframe (right side)
2016-02-20
- Added traction pin in center of trucks
2016-10-09
- Corrected grills under radiator intakes
2016-11-06
- Revised panel under cab on conductor's side
2016-11-17
- Lowered latch on hood door below exhaust stack (right side)
2017-01-25
- Revised cab side window size and location (slightly shorter; moved slightly upward)
- Added 4 holes behind left front jacking pad
2017-02-08
- Added empty handbrake chain bracket to front right truck
2017-02-18
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)
2017-02-23
- Lowered cab sunshade location
2018-03-26
- Revised door width/spacing under central air intake
- Added 2 holes below front cab sub-base door
2020-01-14
- Revised wide handrail stanchions
2021-01-12
- Increased corner handrail thickness
- Revised end handrail stanchions
2022-11-13
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added numberboard seam
2022-11-28
- Corner step height
- Added AEI tag above left rear truck
|
|
GE ET44AC ← →
| 2015-07 - 2015-09
|
| CN 3000-3038
| 39
|
| 2022-11-28Revision history:
2021-01-12
- Increased corner and side handrail thickness
- Revised end handrail stanchions
2022-01-09
- Added numberboard seam
- Corrected line glitch on right front / left rear traction motor air duct
2022-11-12
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added missing truck brake piping (left side)
- Narrower steps
2022-11-28
- Corner step height
- Center hood bolt height
- Added AEI tag above left rear truck
|
|
GE ET44AC ← →
| 2016 - 2020
|
| CN 3039-3120, 3133-3285
| 235
|
| 2022-11-29
|
|
GMD GP35 ← →
| 1964-08
| 1a
| CN 4000-4001
| 2
|
| 2022-02-04Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2016-02-08
- Revised rear headlight housing contour
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
- Corrected corner handrail length
2021-01-04
- Changed rear pilot from rock deflector to footboards
- Removed front pilot grabiron
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
GMD GP38-2(W) ← →
| 1973-06
|
| CN 5560 re# 4760
| 1
| builder's plate: GP38-2
| 2023-01-09Revision history:
2013-01-05
- Cab handrail attachments
2014-10-19
- Added rerail frogs
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)
2016-02-08
- Revised rear headlight housing contour
2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- Revised paper air filter housing
2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD GP38-2(W) ← →
| "
|
| "
| "
| " (as modified)
| 2023-01-09Revision history:
2013-01-05
- Cab handrail attachments
2014-10-19
- Added coupler knuckle bracket (rear pilot)
- Added oil retention tank (behind fuel tank)
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)
2016-02-08
- Revised rear headlight housing contour
2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- Revised paper air filter housing
2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD GP38-2(W) ← →
| 1973-10 - 1974-01
|
| CN 5561-5610 re# 4761-4810
| 50
| builder's plate: GP38-2
| 2023-01-09Revision history:
2013-01-05
- Cab handrail attachments
2014-10-19
- Added rerail frogs
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)
2016-02-08
- Revised rear headlight housing contour
2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- Revised paper air filter housing
2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD GP38-2(W) ← →
| "
|
| "
| "
| " (as modified) single plow
| 2023-01-09Revision history:
2013-01-05
- Cab handrail attachments
2014-10-19
- Added coupler knuckle bracket (rear pilot)
- Added oil retention tank (behind fuel tank)
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)
2016-02-08
- Revised rear headlight housing contour
2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- Revised paper air filter housing
2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD GP38-2(W) ← →
| "
|
| "
| "
| " (as modified) dual plows
| 2023-01-09Revision history:
2013-01-05
- Cab handrail attachments
2014-10-19
- Added coupler knuckle bracket (rear pilot)
- Added oil retention tank (behind fuel tank)
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)
2016-02-08
- Revised rear headlight housing contour
2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- Revised paper air filter housing
2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD GP40 ← →
| 1966-05 - 1966-12
|
| CN 4002-4011
| 10
|
| 2022-02-04Revision history:
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-09
- Fuel tank height and gap from underframe
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
|
|
GMD GP40 ← →
| "
|
| CN 9302-9311; ex 4002-4011
| "
| As modified
| 2022-02-04Revision history:
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-09
- Fuel tank height and gap from underframe
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
|
|
GMD GP40 ← →
| 1967-10
|
| CN 4012-4017
| 6
|
| 2022-02-04Revision history:
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-09
- Fuel tank height and gap from underframe
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
|
|
GMD GP40 ← →
| "
|
| CN 9312-9317; ex 4012-4017
| "
| As modified
| 2022-02-04Revision history:
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-09
- Fuel tank height and gap from underframe
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
|
|
GMD GP40-2(W) ← →
| 1976-03 - 1976-05
|
| CN 9633-9667
| 35
| builder's plate: GP40-2
| 2023-01-09Revision history:
2013-01-05
- Cab handrail attachments
2014-10-19
- Added rerail frogs
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)
2016-02-08
- Revised rear headlight housing contour
2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Revised radiator intake grills
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD GP40-2(W) ← →
| "
|
| "
| "
| " (as modified)
| 2023-01-09Revision history:
2013-01-05
- Cab handrail attachments
2014-10-19
- Added coupler knuckle bracket (rear pilot)
- Added oil retention tank (behind fuel tank)
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)
2016-02-08
- Revised rear headlight housing contour
2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Revised radiator intake grills
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD GP40-2L(W) ← →
| 1974
|
| CN 9400-9490
| 91
| builder's plate: GP40-2L
| 2023-01-09Revision history:
2013-01-05
- Cab handrail attachments
2014-10-19
- Added rerail frogs
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)
2016-02-08
- Revised rear headlight housing contour
2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Revised radiator intake grills
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD GP40-2L(W) ← ← →
| 1974 - 1975
|
| CN 9491-9530, 9531-9632
| 40 + 102
| builder's plate: GP40-2L
| 2023-01-09Revision history:
2013-01-05
- Cab handrail attachments
2014-10-19
- Added rerail frogs
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)
2016-02-08
- Revised rear headlight housing contour
2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Revised radiator intake grills
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD GP40-2L(W) ← ← →
| "
|
| CN 9400-9530, 9531-9632
| "
| " (as modified)
| 2023-01-09Revision history:
2013-01-05
- Cab handrail attachments
2014-10-19
- Added coupler knuckle bracket (rear pilot)
- Added oil retention tank (behind fuel tank)
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)
2016-02-08
- Revised rear headlight housing contour
2019-01-25
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Revised radiator intake grills
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-10
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD GP7 ← →
| 1953-08 - 1953-11
| 2d
| CN 7555-7578 re# 1700-1723, 4800-4823
| 24
|
| 2023-07-10Revision history:
2023-04-20
- Front flag holder location
- Truck axle pedestal wear plates
2023-04-24
- Step kick plate height
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
GMD GP9 ← →
| 1955-02 - 1955-04
| 1a
| CN 1724-1747 re# 4400-4423
| 24
| CN Class GR-17a
| 2023-07-10Revision history:
2023-04-20
- Front flag holder location
- Truck axle pedestal wear plates
2023-04-24
- Step kick plate height
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
GMD GP9 ← →
| 1955-04
| 1b
| CN 1748-1750 re# 4424-4426
| 3
| CN Class GR-17a
| 2023-07-10Revision history:
2023-04-20
- Front flag holder location
- Truck axle pedestal wear plates
2023-04-24
- Step kick plate height
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
GMD GP9 ← →
| 1955-08 - 1956-07
| 1b
| CN 2000-2024, re# 4451-4475; 4476-4495
| 45
| CN Class GR-17f
| 2023-07-10Revision history:
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
GMD GP9 ← →
| 1956-11 - 1957-12
| 2a
| CN 4496-4501, re# 4200-4205; 4588:1-4609:1, re# 4206-4227; 4100-4133
| 6 + 22 + 34
| CN Class GR-17g, n, p Flexicoil trucks
| 2023-07-10Revision history:
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
GMD GP9 ← →
| 1956-11 - 1957-01
| 2a
| CN 4502-4538
| 35
| CN Class GR-17h
| 2023-07-10Revision history:
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
GMD GP9 ← →
| 1957-06 - 1957-07
| 2b
| CN 4560-4587
| 28
| CN Class GR-17m
| 2023-07-10Revision history:
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
GMD GP9 ← →
| 1958-02 - 1958-03
| 2b
| CN 4228-4244
| 17
| CN Class GR-17q Flexicoil trucks
| 2023-07-10Revision history:
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
GMD GP9 ← →
| 1957-12 - 1958-01
| 2b
| CN 4588:2-4609:2
| 22
| CN Class GR-17r
| 2023-07-10Revision history:
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
GMD GP9 ← →
| 1958-04 - 1958-05
| 3a
| CN 4245-4270
| 26
| CN Class GR-17t Flexicoil trucks
| 2023-07-10Revision history:
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
GMD GP9 ← →
| 1959-01 - 1959-11
| 3a
| CN 4271-4339, 4147-4156, 4340-4353
| 93
| CN Class GR-17u, y, z Flexicoil trucks
| 2023-07-10Revision history:
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
GMD SD40 ← →
| 1967-09
|
| CN 5000-5007
| 8
| CN Class GF-30c
| 2023-04-08Revision history:
2017-10-28
- Revised brake system (Dofasco Flexicoil trucks)
- Added battery charge receptacle on right side underframe behind cab
- Relocated horn to recess at front of cab
- Revised speed recorder cable
- Added drip rail above cab side windows
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Relocated dynamic brakes
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-11-09
- Added missing grabiron ahead of right-side battery box
- Removed walkway side frame seam near step wells
2023-04-08
- Lower sand pipe under cab
|
|
GMD SD40 ← →
| 1967-10 - 1968-12
|
| CN 5008-5075
| 68
| CN Class GF-30d
| 2023-04-08Revision history:
2017-10-28
- Revised brake system (Dofasco Flexicoil trucks)
- Added battery charge receptacle on right side underframe behind cab
- Relocated horn to recess at front of cab
- Revised speed recorder cable
- Added drip rail above cab side windows
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-11-09
- Added missing grabiron ahead of right-side battery box
- Removed walkway side frame seam near step wells
2023-04-08
- Lower sand pipe under cab
|
|
GMD SD40 ← →
| 1969-02 - 1969-03
|
| CN 5076-5081
| 6
| CN Class GF-30e
| 2023-04-08Revision history:
2017-10-28
- Revised brake system (Dofasco Flexicoil trucks)
- Added battery charge receptacle on right side underframe behind cab
- Relocated horn to recess at front of cab
- Revised speed recorder cable
- Added drip rail above cab side windows
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-11-09
- Added missing grabiron ahead of right-side battery box
- Removed walkway side frame seam near step wells
2023-04-08
- Lower sand pipe under cab
|
|
GMD SD40 ← →
| 1969-03 - 1969-04
|
| CN 5082-5087
| 6
| CN Class GF-30e
| 2023-04-08Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-11-09
- Added missing grabiron ahead of right-side battery box
- Removed walkway side frame seam near step wells
2023-04-08
- Lower sand pipe under cab
|
|
GMD SD40 ← →
| 1969-05 - 1971-08
|
| CN 5088-5110, 5132-5196
| 23 + 65
| CN Class GF-30e, h, k
| 2023-04-08Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-11-09
- Added missing grabiron ahead of right-side battery box
- Removed walkway side frame seam near step wells
2023-04-08
- Added sand pipes running below walkway sideframe
|
|
GMD SD40 ← →
| 1969
|
| CN 5111-5131
| 21
| CN Class GF-30e, h
| 2023-04-08Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Relocated dynamic brakes
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-11-09
- Added missing grabiron ahead of right-side battery box
- Removed walkway side frame seam near step wells
2023-04-08
- Added sand pipes running below walkway sideframe
|
|
GMD SD40 ← →
| 1971
|
| CN 5197-5214
| 18
| CN Class GF-30k
| 2023-04-08Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-11-09
- Added missing grabiron ahead of right-side battery box
- Removed walkway side frame seam near step wells
2023-04-08
- Added sand pipes running below walkway sideframe
|
|
GMD SD40 ← →
| 1971
|
| CN 5215-5240
| 26
| CN Class GF-30k, m
| 2023-04-08Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised exhaust stack
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-11-09
- Added missing grabiron ahead of right-side battery box
- Removed walkway side frame seam near step wells
2023-04-08
- Added sand pipes running below walkway sideframe
|
|
GMD SD40-2(W) ← →
| 1975-05 - 1975-07
| 1a1
| CN 5241-5261
| 21
| Builder's plate on all SD40-2(W) units: SD40-2
| 2023-01-09Revision history:
2016-02-08
- Revised rear headlight housing contour
2017-01-21
- Revised handbrake chain with pulley (left-side view)
- Added ditch light brackets
2019-01-28
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-18
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
- Corrected line glitch on rear of cab roof (left side)
- Corrected lift ring glitch ahead of dynamic brake fans (right side)
2021-01-09
- Fuel tank height and gap from underframe
2022-03-19
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD SD40-2(W) ← →
| "
|
| "
| "
| As modified
| 2023-01-09Revision history:
2016-02-08
- Revised rear headlight housing contour
2017-01-21
- Revised handbrake chain with pulley (left-side view)
2019-01-28
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-18
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
2021-01-09
- Fuel tank height and gap from underframe
2022-03-19
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD SD40-2(W) ← →
| 1975-07
| 1a1
| CN 5262-5278
| 17
|
| 2023-01-09Revision history:
2016-02-08
- Revised rear headlight housing contour
2017-01-21
- Revised handbrake chain with pulley (left-side view)
- Added ditch light brackets
2019-01-28
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-18
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
- Corrected line glitch on rear of cab roof (left side)
2021-01-09
- Fuel tank height and gap from underframe
2022-03-19
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD SD40-2(W) ← →
| "
|
| "
| "
| As modified
| 2023-01-09Revision history:
2016-02-08
- Revised rear headlight housing contour
2017-01-21
- Revised handbrake chain with pulley (left-side view)
2019-01-28
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-18
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
2021-01-09
- Fuel tank height and gap from underframe
2022-03-19
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD SD40-2(W) ← →
| 1976-01
| 1a2
| CN 5279-5293
| 15
|
| 2023-01-09Revision history:
2019-01-28
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-18
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
- Corrected line glitch on rear of cab roof (left side)
2021-01-09
- Fuel tank height and gap from underframe
2022-03-19
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD SD40-2(W) ← →
| "
| "
| "
| "
| As modified
| 2023-01-09Revision history:
2019-01-28
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-18
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
2021-01-09
- Fuel tank height and gap from underframe
2022-03-19
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD SD40-2(W) ← →
| 1978-07 - 1978-10
| 1a3
| CN 5294-5313
| 20
|
| 2023-01-09Revision history:
2019-01-28
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-18
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
- Corrected line glitch on rear of cab roof (left side)
- Corrected lift ring glitch ahead of dynamic brake fans (right side)
2021-01-09
- Fuel tank height and gap from underframe
2022-03-19
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD SD40-2(W) ← →
| "
| "
| "
| "
| As modified
| 2023-01-09Revision history:
2019-01-28
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-18
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
2021-01-09
- Fuel tank height and gap from underframe
2022-03-19
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD SD40-2(W) ← →
| 1979-12
| 1b
| CN 5314-5323
| 10
|
| 2023-01-09Revision history:
2019-01-28
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-18
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
- Corrected line glitch on rear of cab roof (left side)
- Corrected lift ring glitch ahead of dynamic brake fans (right side)
2021-01-09
- Fuel tank height and gap from underframe
2022-03-19
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD SD40-2(W) ← →
| "
| "
| "
| "
| As modified
| 2023-01-09Revision history:
2019-01-28
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
2020-12-18
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
2021-01-09
- Fuel tank height and gap from underframe
2022-03-19
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2023-01-09
- Long hood end seams
|
|
GMD SD50F ← →
| 1985-04 - 1986-02
|
| CN 5400-5439, 9900-9903
| 44
| 9900-9903 initially classified as SD50AF; re# 5500-5503 & reclassified as SD60F
| 2022-12-01Revision history:
2020-12-22
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Cab corners and sub-base doors
- Sand hoses
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
|
|
GMD SD50F ← →
| 1987-02 - 1987-07
|
| CN 5440-5459
| 20
|
| 2022-12-01Revision history:
2020-12-22
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Cab corners and sub-base doors
- Sand hoses
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
|
|
GMD SD60F ← →
| 1989-02 - 1989-11
|
| CN 5504-5563
| 60
|
| 2022-12-01Revision history:
2020-12-22
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Cab corners and sub-base doors
- Sand hoses
2021-01-11
- Fuel tank height and gap from underframe
2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
|
|
MLW FPA-4 ← →
| 1958-10 - 1959-05
|
| CN 6760-6793
| 34
|
| 2022-03-01Revision history:
2022-02-18
- Increased bottom of underframe height
- Relocated and revised traction motor cable brackets
- Lowered side grills and upper carbody panels
- Adjusted cab, window and nose proportions
- Roof hatch positions
2022-03-01
- Minor side ladder changes
- Carbody roof vent location (left side)
- Added bolts to end diaphragm
- Headlight casing and nose door
|
|
MLW FPA-4 ← →
| "
|
| VIA 6760-6793; ex-CN
| "
| As modified (includes VIA Rail-applied side grabirons)
| 2022-03-01Revision history:
2022-02-18
- Increased bottom of underframe height
- Relocated and revised traction motor cable brackets
- Lowered side grills and upper carbody panels
- Adjusted cab, window and nose proportions
- Roof hatch positions
2022-03-01
- Minor side ladder changes
- Carbody roof vent location (left side)
- Headlight casing and nose door
|
|
MLW FPB-4 ← →
| 1958-10 - 1959-03
|
| CN 6860-6871
| 12
|
| 2022-03-01Revision history:
2022-02-18
- Increased bottom of underframe height
- Relocated and revised traction motor cable brackets
- Lowered side grills and upper carbody panels
- Adjusted cab, window and nose proportions
- Roof hatch positions
2022-03-01
- Minor side ladder changes
- Carbody roof vent location (left side)
- Added bolts to end diaphragms
|
|
MLW FPB-4 ← →
| "
|
| CN / VIA 6860-6871
| "
| As modified
| 2022-03-01Revision history:
2022-02-18
- Increased bottom of underframe height
- Relocated and revised traction motor cable brackets
- Lowered side grills and upper carbody panels
- Adjusted cab, window and nose proportions
- Roof hatch positions
2022-03-01
- Minor side ladder changes
- Carbody roof vent location (left side)
|
|
MLW M-420 ← →
| 1973-05 - 1973-10
|
| CN 2500-2529
| 30
| CN class MR-20a; re# 3500-3529
| 2024-01-26Revision history:
2020-11-25
- Removed rear numberboards
- Removed rear wrap-around pilot
2022-03-15
- Coupler cut lever thickness and height
2024-01-26
- Corrected minor glitches in cab sunshades and class lights
|
|
MLW M-420 ← →
| "
|
| "
| "
| As modified Old door latches
| 2024-01-26Revision history:
2022-03-15
- Coupler cut lever thickness and height
2024-01-26
- Corrected minor glitches in cab sunshades and class lights
|
|
MLW M-420 ← →
| "
|
| "
| "
| As modified New door latches
| 2024-01-26Revision history:
2022-03-15
- Coupler cut lever thickness and height
2024-01-26
- Corrected minor glitches in cab sunshades and class lights
|
|
MLW M-420 ← →
| 1974-03 - 1974-07
|
| CN 2530-2559
| 30
| CN class MR-20b; re# 3530-3559
| 2024-01-26Revision history:
2020-11-25
- Removed rear wrap-around pilot
2022-03-15
- Coupler cut lever thickness and height
2024-01-26
- Corrected minor glitches in cab sunshades and class lights
|
|
MLW M-420 ← →
| "
|
| "
| "
| As modified Old door latches
| 2024-01-26Revision history:
2018-01-29
- Slight revisions to cut-off valves and fittings in air piping (right side)
- Revised battery box covers (right side)
- Revised handbrake wheel notch (right side)
2020-11-25
- Removed pollution collector tank behind fuel tank
2022-03-15
- Coupler cut lever thickness and height
2024-01-26
- Corrected minor glitches in cab sunshades and class lights
|
|
MLW M-420 ← →
| "
|
| "
| "
| As modified New door latches
| 2024-01-26Revision history:
2018-01-29
- Slight revisions to cut-off valves and fittings in air piping (right side)
- Revised battery box covers (right side)
- Revised handbrake wheel notch (right side)
2020-11-25
- Removed pollution collector tank behind fuel tank
2022-03-15
- Coupler cut lever thickness and height
2024-01-26
- Corrected minor glitches in cab sunshades and class lights
|
|
MLW M-420 ← →
| 1976-09 - 1976-12
|
| CN 2560-2579
| 20
| CN class MR-20c; re# 3560-3579
| 2024-01-26Revision history:
2020-11-25
- Added pollution collector tank behind fuel tank
2022-03-15
- Coupler cut lever thickness and height
2024-01-26
- Corrected minor glitches in cab sunshades and class lights
|
|
MLW M-420 ← →
| "
|
| "
| "
| As modified Old door latches
| 2024-01-26Revision history:
2018-01-29
- Slight revisions to cut-off valves and fittings in air piping (right side)
2022-03-15
- Coupler cut lever thickness and height
2024-01-26
- Corrected minor glitches in cab sunshades and class lights
|
|
MLW M-420 ← →
| "
|
| "
| "
| As modified New door latches
| 2024-01-26Revision history:
2018-01-29
- Slight revisions to cut-off valves and fittings in air piping (right side)
2022-03-15
- Coupler cut lever thickness and height
2024-01-26
- Corrected minor glitches in cab sunshades and class lights
|
|
MLW RS-10S ← →
| 1956-10
|
| CN 3066-3073
| 8
| CN class MR-16j; re# 3815-3822
| 2023-12-17Revision history:
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.5"
- Battery box and short hood side doors/grabirons moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Footboards and pilot plate
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-10S ← →
| 1956-11 - 1957-01
|
| CN 3074-3093
| 20
| CN class MR-16k
| 2023-12-17Revision history:
2018-01-28
- Added winterization duct ahead of radiator fan housing
- Reversed door handle orientation (right-side view)
2018-12-14
- Revised piping and air fittings behind fuel tank (right-side view)
- Corrected cab door handle orientation
- Revised battery box covers
- Added missing rear sand hatch (right-side view)
- Revised short hood door size
2018-12-18
- Added missing pipe at rear of fuel tank
2019-01-02
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.5"
- Battery box and short hood side doors/grabirons moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Footboards and pilot plate
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| 1956-12 - 1957-12
| 1a
| CN 3615-3670
| 56
| CN class MR-18b
| 2023-12-17Revision history:
2018-01-28
- Added winterization duct ahead of radiator fan housing
2018-12-14
- Revised piping and air fittings behind fuel tank (right-side view)
- Corrected cab door handle orientation
- Revised battery box covers
- Added missing rear sand hatch (right-side view)
- Revised short hood door size
2018-12-18
- Added missing pipe at rear of fuel tank
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| "
| "
| "
|
| as modified
| 2023-12-17Revision history:
2018-01-28
- Added winterization duct ahead of radiator fan housing
2018-12-14
- Revised piping and air fittings behind fuel tank (right-side view)
- Corrected cab door handle orientation
- Revised battery box covers
- Added missing rear sand hatch (right-side view)
- Revised short hood door size
- Revised carbody air filters
2018-12-18
- Added missing pipe at rear of fuel tank
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| 1957-12 - 1958-03
| 1a
| CN 3671-3676
| 6
| CN class MR-18c
| 2023-12-17Revision history:
2018-01-28
- Added winterization duct ahead of radiator fan housing
2018-12-14
- Revised piping and air fittings behind fuel tank (right-side view)
- Corrected cab door handle orientation
- Revised battery box covers
- Added missing rear sand hatch (right-side view)
- Revised short hood door size
2018-12-18
- Added missing pipe at rear of fuel tank
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| "
| "
| "
|
| as modified
| 2023-12-17Revision history:
2018-01-28
- Added winterization duct ahead of radiator fan housing
2018-12-14
- Revised piping and air fittings behind fuel tank (right-side view)
- Corrected cab door handle orientation
- Revised battery box covers
- Added missing rear sand hatch (right-side view)
- Revised short hood door size
- Revised carbody air filters
2018-12-18
- Added missing pipe at rear of fuel tank
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| "
| 1b
| CN 3677-3700
| 24
| CN class MR-18c
| 2023-12-17Revision history:
2018-01-28
- Added winterization duct ahead of radiator fan housing
2018-12-14
- Revised piping and air fittings behind fuel tank (right-side view)
- Corrected cab door handle orientation
- Revised battery box covers
- Added missing rear sand hatch (right-side view)
- Revised short hood door size
2018-12-18
- Added missing pipe at rear of fuel tank
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| "
| "
| "
|
| as modified
| 2023-12-17Revision history:
2018-01-28
- Added winterization duct ahead of radiator fan housing
2018-12-14
- Revised piping and air fittings behind fuel tank (right-side view)
- Corrected cab door handle orientation
- Revised battery box covers
- Added missing rear sand hatch (right-side view)
- Revised short hood door size
- Revised carbody air filters
2018-12-18
- Added missing pipe at rear of fuel tank
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| 1958-06
| 1c
| CN 3701-3704
| 4
| CN class MR-18d
| 2023-12-17Revision history:
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| "
| "
| "
|
| as modified
| 2023-12-17Revision history:
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| 1958-06 - 1958-11
| 1d
| CN 3705-3745
| 41
| CN class MR-18d
| 2023-12-17Revision history:
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| "
| "
| "
|
| as modified
| 2023-12-17Revision history:
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| 1959-05 - 1959-07
| 2a
| CN 3830-3839
| 10
| CN class MR-18f
| 2023-12-17Revision history:
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| 1959-06 - 1959-12
| 2b
| CN 3100-3129, 3840-3849
| 40
| CN class MR-18e, f
| 2023-12-17Revision history:
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RS-18 ← →
| 1960-01 - 1960-08
| 2c
| CN 3850-3893
| 44
| CN class MR-18g
| 2023-12-17Revision history:
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
|
|
MLW RSC-14 ← →
| 1975 (R)
| 2b
| CN 1750-1756
|
| CN RS-18 rebuild (ex 3843-3849)
| 2023-12-25Revision history:
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
2023-12-21
- Truck brake cylinders, brake rigging and sand lines
|
|
MLW RSC-14 ← →
| 1975 (R)
| 2c
| CN 1757-1787
|
| CN RS-18 rebuild (ex 3850-3893 series)
| 2023-12-25Revision history:
2019-01-03
- Increased frame height by 0.5"
2019-01-09
- Added radiator fan clips
2019-01-12
- Added rooftop vent on conductor's side behind cab
2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes
2022-03-23
- Coupler cut lever and pilot end handrail
2023-12-17
- Corrected number of radiator shutters
2023-12-21
- Truck brake cylinders, brake rigging and sand lines
|
|