Model
| Built
| Phase
| Numbers
| Qty
| Notes
| Last modified
|
EMD GP30 ← →
| 1962-04 - 1962-05
| 1a
| DRGW 3001-3013
| 13
|
| 2022-02-04Revision history:
2017-10-07
- Revised bottom hatches on hood ends
- Removed bottom hatch latch hooks on short hood
2019-07-31
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors narrowed by 0.75"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2022-01-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
- Corrected minor transparency glitch with front truck traction motor air ducts (right side)
|
|
EMD GP30 ← →
| 1963-01 - 1963-02
| 1d
| DRGW 3014-3028
| 15
|
| 2022-02-04Revision history:
2017-10-07
- Revised bottom hatches on hood ends
- Removed bottom hatch latch hooks on short hood
2019-07-31
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors narrowed by 0.75"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2022-01-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
- Corrected minor transparency glitch with front truck traction motor air ducts (right side)
|
|
EMD GP35 ← →
| 1964-05 - 1964-06
| 1b1
| DRGW 3029-3038
| 10
|
| 2022-02-04Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2018-11-14
- Revised steps and pilots
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
EMD GP35 ← →
| 1964-12 - 1965-01
| 1b4
| DRGW 3039-3047
| 9
|
| 2022-02-04Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2018-11-14
- Revised steps and pilots
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
EMD GP35 ← →
| 1965-01
| 1c1
| DRGW 3048-3050
| 3
|
| 2022-02-04Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)
2018-11-14
- Revised steps and pilots
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
EMD GP40 ← →
| 1966-01
| 1a1
| DRGW 3051-3063
| 13
|
| 2022-02-04Revision history:
2018-10-31
- Corrected minor line glitch on latches on first engine room door
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
- Corrected pipe overlapping bell
2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank
2021-01-09
- Fuel tank height and gap from underframe
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
|
|
EMD GP40 ← →
| 1966-09 - 1967-02
| 1a3
| DRGW 3064-3080
| 17
|
| 2022-02-04Revision history:
2018-10-31
- Corrected minor line glitch on latches on first engine room door
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
- Corrected pipe overlapping bell
2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank
2021-01-09
- Fuel tank height and gap from underframe
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
|
|
EMD GP40 ← →
| 1969-10
| 2b
| DRGW 3081-3085
| 5
|
| 2022-01-28Revision history:
2018-10-31
- Corrected minor line glitch on latches on first engine room door
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
- Corrected pipe overlapping bell
2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank
2021-01-09
- Fuel tank height and gap from underframe
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
|
|
EMD GP40 ← →
| 1971-11
| 2c
| DRGW 3086-3093
| 8
|
| 2023-12-28Revision history:
2018-10-31
- Corrected minor line glitch on latches on first engine room door
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
- Corrected pipe overlapping bell
2020-12-04
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-09
- Fuel tank height and gap from underframe
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
2023-12-28
- Bottom latch on second hood door (left side)
|
|
EMD GP40-2 ← →
| 1972-12 - 1974-11
| 1a1, 1a2
| DRGW 3094-3112, 3116-3128
| 19 + 13
| Phase 1a2 version illustrated
| 2023-01-09
|
|
EMD GP40-2 ← →
| 1983.03
| 3
| DRGW 3129-3130
| 2
|
| 2023-01-09
|
|
EMD GP60 ← →
| 1990-03 - 1990-05
| 2c
| DRGW 3154-3156; SSW 9665-9714
| 3 + 50
|
| 2022-12-11Revision history:
2013-01-26
- Blower duct, central air intake
- Dynamic brake housing
- Trucks
- Fans
2013-03-05
- Corner handrails, pilot braces, rear end plate
- Traction motor cables
2014-02-15
- Truck shape and casting logo
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
2014-11-15
- Moved rear lift ring from roof to side
- Revised inertial air intakes
2015-08-31
- Removed flag holders
2019-08-08
- Revised center hood door spacing
- Revised hood behind cab
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
2020-12-15
- Revised side handrail stanchions
- Increased handrail thickness
- Fuel tank vent pipe (increased diameter, revised fittings)
- Revised radiator and dynamic brake fan dimensions and spacing
2021-01-12
- Fuel tank height and gap from underframe
2022-12-11
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
- Anticlimber and MU receptacle brackets
|
|
EMD SD50 ← →
| 1984-08 - 1984-09
| 2b2
| DRGW 5501-5517
| 17
|
| 2024-01-30Revision history:
2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
- Revised hood behind cab (SD60 right-side views only)
2020-11-28
- Minor detail revisions to inertial air intake and angled seam behind cab
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2021-01-10
- Fuel tank height and gap from underframe
2022-08-02
- Coupler cut levers
- Corner handrail end plate attachment points
2024-01-28
- Corrected minor glitches in wheel bearings, left side traction motor cables, and left rear coupler cut lever
- Handrail stanchion spacing
- Hood door and radiator intake height
- Rear hood door widths
- Shorter walkway blower duct (left side)
- Narrower step plate behind cab (right side)
|
|