Model
| Built
| Phase
| Numbers
| Qty
| Notes
| Last modified
|
EMD GP20 ← →
| 1960-08
| 1a
| EMDX 5625-5628
| 4
|
| 2023-07-10Revision history:
2020-12-05
- Increased handrail thickness
- Revised radiator and dynamic brake fans
2022-01-03
- Larger roof lift rings
- Added lift rings around dynamic brakes
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Corner step height increased by 2"
- Footboard height increased by 1.25"
- Revised coupler carrier / draft gear
- Horn manifold and back cap dimensions
2022-11-15
- Changed draft gear housing from M-375/MS-485 to M-380/M-381
2023-02-07
- Removed handrail stanchion top clamps
- Adjusted handrail stanchion spacing next to short hood
- Added missing section of front hood doors (right side)
2023-02-16
- Fuel tank height
- Fuel filler
- Added missing line segment on bottom front edge of generator room doors (right side)
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
EMD GP20 ← →
| 1960-08
| 1a
| SP 7234-7237
| 4
| ex-EMDX 5625-5628; re# 4084-4087
| 2023-07-10Revision history:
2020-12-05
- Increased handrail thickness
- Revised radiator and dynamic brake fans
2022-01-03
- Larger roof lift rings
- Added lift rings around dynamic brakes
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Corner step height increased by 2"
- Footboard height increased by 1.25"
- Revised coupler carrier / draft gear
2022-11-15
- Changed draft gear housing from M-375/MS-485 to M-380/M-381
2023-02-07
- Removed handrail stanchion top clamps
- Adjusted handrail stanchion spacing next to short hood
- Added missing section of front hood doors (right side)
2023-02-16
- Fuel tank height
- Fuel filler
- Added missing line segment on bottom front edge of generator room doors (right side)
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
EMD GP35 ← →
| 1963-07 - 1963-08
| 1a1
| EMDX 5652, 5654
| 2
|
| 2022-03-02Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-02
| 1a1
| EMDX 5661
| 1
| re# EMDX 1964
| 2022-03-02Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP40X ← →
| 1965-04
|
| EMDX 433A
|
| GP40 test-bed on GP35 frame
| 2022-03-02Revision history:
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans
2020-12-16
- Revised radiator fan spacing
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe
- Handrail stanchions above fuel tank (left side)
|
|
EMD GP59 ← →
| 1985-06
| 1
| EMDX 8-9
| 2
|
| 2022-12-11Revision history:
2014-02-15
- Truck shape and casting logo
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
2014-11-15
- Revised inertial air intakes
2015-08-25
- Revised end handrails (center stanchions moved in from the end, modified stanchion/chain support)
2015-09-03
- Corrected location of front class lights
2020-01-05
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
2020-12-15
- Increased handrail thickness
- Fuel tank vent pipe (increased diameter, revised fittings)
- Revised radiator and dynamic brake fan dimensions and spacing
- Increased metal sand pipe diameter
2021-01-12
- Fuel tank height and gap from underframe
2021-02-10
- Revised side handrail stanchions
2022-12-11
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
- Anticlimber
|
|
EMD GP59 ← →
| 1985-06
| 1
| EMDX 10
| 1
|
| 2022-12-11Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
2014-11-15
- Revised inertial air intakes
2015-08-25
- Revised end handrails (center stanchions moved in from the end, modified stanchion/chain support)
2015-09-03
- Corrected location of front class lights
2020-01-05
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
2020-12-15
- Increased handrail thickness
- Fuel tank vent pipe (increased diameter, revised fittings)
- Revised radiator and dynamic brake fan dimensions and spacing
- Increased metal sand pipe diameter
2021-01-12
- Fuel tank height and gap from underframe
2021-02-10
- Revised side handrail stanchions
2022-12-11
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
- Anticlimber
|
|
EMD SD40X ← →
| 1964-07
| 1a
| EMDX 434
| 1
| SD40 test-bed on SD35 frame to GMO 950
| 2022-03-21Revision history:
2020-01-19
- Narrower stepwell edges
2020-12-16
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD40X ← → →
| 1965-02 - 1965-04
| 1d1, 1d2
| EMDX 434A-434F
| 6
| SD40 test-bed on SD35 frame to UP 3040-3045
| 2022-03-21Revision history:
2020-01-19
- Narrower stepwell edges
2020-12-16
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD40X ← →
| 1965-04
| 1d2
| EMDX 434G-434H
| 2
| SD40 test-bed on SD35 frame; to UP 3046-3047 Radiator intakes as modified by UP (lack of as-built reference photos)
| 2022-03-21Revision history:
2020-12-16
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1965-12 - 1966-01
| 1a1
| EMDX 4351-4353
| 3
|
| 2022-03-21Revision history:
2014-12-31
- Underframe height
- Truck details and casting logos
2017-05-20
- Removed dynamic brake roof vent
- Revised handrail stanchion at rear of walkway blower duct
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD60 ← →
| 1986-10 - 1986-12
|
| EMDX 9000-9099
| 100
| Oakway Leasing
| 2023-01-19Revision history:
2017-07-01
- Corrected latches on first and last tall hood doors
2017-12-31
- Revised angled sheet behind bottom step
- Revised piping behind fuel tank
2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
- Revised hood behind cab (right-side view)
2020-11-28
- Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2020-12-26
- Corrected location of handrail attachment point to rear of cab (left side)
2021-01-10
- Fuel tank height and gap from underframe
2021-01-22
- Relocated horn
2022-12-12
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-19
- Hood door and radiator intake height
|
|
EMD SD70ACe ← →
| 2011-08
| 2f
| EMDX 2012
| 1
|
| 2022-03-30Revision history:
2017-02-06
- Relocated traction motor cables above rear truck (left side)
- Minor revisions to cables above front truck (left side)
- Minor correction to rear edge of panel behind inverter cabinet (below grabirons) (left side)
2017-09-19
- Revised truck traction pin (near center axle on trucks)
- Added minor truck details (bolts under axles and pins at radial-steering arm ends)
- Smaller radiator fan diameter and spacing, fans moved rearward
- Added missing section of air pipe behind front steps (left side)
- Revised inverter cabinet grills
2017-11-11
- Relocated hole below handbrake wheel (right side)
2017-12-17
- Revised cables/pipes under back of cab (right side)
2020-12-22
- Increased handrail thickness
2021-01-11
- Fuel tank height and gap from underframe
2022-01-21
- Added missing portion of brake levers near brake cylinders
- Corrected line glitch above cab nose door (right side)
2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
|
|
EMD SD70ACe ← →
| 2011-09 - 2011-10
| 2f
| EMDX 2100-2114
| 15
| 2100-2109 re# KCS 4130-4139; 2110-2114 re# EMDX 1201-1205
| 2022-03-30Revision history:
2017-02-06
- Relocated traction motor cables above rear truck (left side)
- Minor revisions to cables above front truck (left side)
- Minor correction to rear edge of panel behind inverter cabinet (below grabirons) (left side)
2017-09-19
- Revised truck traction pin (near center axle on trucks)
- Added minor truck details (bolts under axles and pins at radial-steering arm ends)
- Smaller radiator fan diameter and spacing, fans moved rearward
- Added missing section of air pipe behind front steps (left side)
- Revised inverter cabinet grills
2017-11-11
- Relocated hole below handbrake wheel (right side)
2017-12-17
- Revised cables/pipes under back of cab (right side)
2020-12-22
- Increased handrail thickness
2021-01-11
- Fuel tank height and gap from underframe
2022-01-21
- Added missing portion of brake levers near brake cylinders
- Corrected line glitch above cab nose door (right side)
2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
|
|