Model
| Built
| Phase
| Numbers
| Qty
| Notes
| Last modified
|
ALCO FA-1 ← →
| 1946-01
|
| ALCO 1500, 1502 (Demonstrators)
| 2
| sold to GMO; re# 700-701
| 2023-02-19
|
|
ALCO FA-1 ← →
| 1946-01 - 1946-11
|
| GMO 702-735
| 34
|
| 2023-02-19
|
|
ALCO FA-1 ← →
| 1946-11 - 1947-01
|
| GMO 736-754
| 19
|
| 2023-02-19
|
|
ALCO PA-1 ← →
| 1946-11 - 1946-12
|
| GMO 290-291
| 2
|
| 2023-02-20
|
|
EMD GP30 ← →
| 1962-12 - 1963-04
| 1c2
| GMO 500-516
| 17
| Type B trucks
| 2022-03-15Revision history:
2016-02-27
- Corrected pilots, support plates and footboards (representing GP18-GP30 version rather than GP35 and later version)
2017-09-02
- Corrected minor line glitch on latches on first engine room door
- Revised coupler pockets
- Corrected mismatched hood seams behind conductor's side inertial air intake
- Revised center radiator fan (changed to cap-top instead of open-top)
2017-10-07
- Revised bottom hatches on hood ends
- Removed bottom hatch latch hooks on short hood
- Revised cab sun shade and mirrors
2019-07-31
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors narrowed by 0.75"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2021-02-09
- Added missing end transoms on trucks
2022-01-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-03-15
- Horn manifold and back cap dimensions
|
|
EMD GP30 ← →
| "
| 1d
| "
| "
| "
| 2022-03-15Revision history:
2016-02-27
- Corrected pilots, support plates and footboards (representing GP18-GP30 version rather than GP35 and later version)
2017-09-02
- Corrected minor line glitch on latches on first engine room door
- Revised coupler pockets
- Corrected mismatched hood seams behind conductor's side inertial air intake
- Revised center radiator fan (changed to cap-top instead of open-top)
2017-10-07
- Revised bottom hatches on hood ends
- Removed bottom hatch latch hooks on short hood
- Revised cab sun shade and mirrors
2019-07-31
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors narrowed by 0.75"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2021-02-09
- Added missing end transoms on trucks
2022-01-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-03-15
- Horn manifold and back cap dimensions
|
|
EMD GP30 ← →
| "
| 1e
| "
| "
| "
| 2022-03-15Revision history:
2016-02-27
- Corrected pilots, support plates and footboards (representing GP18-GP30 version rather than GP35 and later version)
2017-09-02
- Corrected minor line glitch on latches on first engine room door
- Revised coupler pockets
- Corrected mismatched hood seams behind conductor's side inertial air intake
- Revised center radiator fan (changed to cap-top instead of open-top)
2017-10-07
- Revised bottom hatches on hood ends
- Removed bottom hatch latch hooks on short hood
- Revised cab sun shade and mirrors
2019-07-31
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors narrowed by 0.75"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2021-02-09
- Added missing end transoms on trucks
2022-01-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-03-15
- Horn manifold and back cap dimensions
|
|
EMD GP30 ← →
| 1963-05
| 2a
| GMO 517-519
| 3
| Type B trucks
| 2022-03-15Revision history:
2016-02-27
- Corrected pilots, support plates and footboards (representing GP18-GP30 version rather than GP35 and later version)
2017-09-02
- Corrected minor line glitch on latches on first engine room door
- Revised coupler pockets
- Corrected mismatched hood seams behind conductor's side inertial air intake
- Revised center radiator fan (changed to cap-top instead of open-top)
2017-10-07
- Revised bottom hatches on hood ends
- Removed bottom hatch latch hooks on short hood
- Revised cab sun shade and mirrors
2019-07-31
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors narrowed by 0.75"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2021-02-09
- Added missing end transoms on trucks
2022-01-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-03-15
- Horn manifold and back cap dimensions
|
|
EMD GP30 ← →
| 1963-08 - 1963-09
| 2b
| GMO 520-530
| 11
| Type B trucks
| 2022-03-15Revision history:
2016-02-27
- Corrected pilots, support plates and footboards (representing GP18-GP30 version rather than GP35 and later version)
2017-09-02
- Corrected minor line glitch on latches on first engine room door
- Revised coupler pockets
- Corrected mismatched hood seams behind conductor's side inertial air intake
- Revised center radiator fan (changed to cap-top instead of open-top)
2017-10-07
- Revised bottom hatches on hood ends
- Removed bottom hatch latch hooks on short hood
- Revised cab sun shade and mirrors
2019-07-31
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors narrowed by 0.75"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2021-02-09
- Added missing end transoms on trucks
2022-01-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-03-15
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-02
| 1a1
| GMO 601-605
| 5
| Type B Trucks
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2014-11-27
- Revised trucks
2015-07-26
- Added missing fuel gauge (left side)
2016-02-25
- Revised horn
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-03 - 1964-04
| 1a2
| GMO 606-612
| 7
| Type B Trucks
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2014-11-27
- Revised trucks
2015-07-26
- Added missing fuel gauge (left side)
2016-02-25
- Revised horn
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-08 - 1964-09
| 1b1
| GMO 613-624
| 12
| Type B Trucks
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2014-11-27
- Revised trucks
2015-07-26
- Added missing fuel gauge (left side)
2016-02-25
- Revised horn
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← → →
| 1965-01 - 1965-03
| 1c1, 1c2
| GMO 625-636
| 12
| Type B Trucks
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2014-11-27
- Revised trucks
2015-07-26
- Added missing fuel gauge (left side)
2016-02-25
- Revised horn
2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1965-08 - 1965-09
| 2c
| GMO 637-648
| 12
| Type B Trucks
| 2022-03-02Revision history:
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP38 ← →
| 1969-08
| 2b
| GMO 701-720
| 20
|
| 2022-03-02Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing
2019-01-23
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell
2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank
2021-01-09
- Fuel tank height and gap from underframe
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP38-2 ← →
| 1972-04
| 1a
| GMO 740-749
| 10
|
| 2023-01-09Revision history:
2020-12-08
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (right rear under walkway)
2021-01-09
- Air pipe vent valve (left front under walkway)
- Fuel tank height and gap from underframe
2022-02-07
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
2022-03-03
- Horn manifold and back cap dimensions
2023-01-09
- Long hood end seams
|
|
EMD GP38-2 ← →
| 1972-08
| 1b1
| GMO 750-754
| 5
|
| 2023-01-09Revision history:
2020-12-08
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (right rear under walkway)
2021-01-09
- Air pipe vent valve (left front under walkway)
- Fuel tank height and gap from underframe
2022-02-07
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
2022-03-03
- Horn manifold and back cap dimensions
2023-01-09
- Long hood end seams
|
|
EMD GP38AC ← →
| 1971-03 - 1971-12
| 2c, 3
| GMO 721-733
| 13
|
| 2023-10-25Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing
2019-01-23
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell
2020-12-04
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-09
- Fuel tank height and gap from underframe
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
2022-03-02
- Horn manifold and back cap dimensions
2023-10-25
- Bottom latch on second hood door
|
|