| Model
| Built
| Phase
| Numbers
| Qty
| Notes
| Last modified
|
ALCO C-425
← →
| 1964-10 -
1964-11
| 1
| PRR 2416-2421
| 6
|
| 2024-01-03Revision history:
2021-12-30
- Hood roof panels and hinges
2022-03-04
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved rearward by 0.5"
- Front/rear hood ends moved inward by 0.25"
- Hood length reduced by 0.75" (length removed in 4 doors under exhaust stack)
- Coupler cut lever thickness and height
- Added pilot grabirons
- Horn manifold and back cap dimensions
2023-12-31
- Added dummy MU receptacle on end handrails
- Revised axle speed recorders
2024-01-03
- Hood door latches
|
|
|
ALCO C-425
← →
| 1965-02 -
1965-03
| 2a
| PRR 2422-2436
| 15
|
| 2024-01-03
|
|
|
ALCO C-425
← →
| 1965-12
| 2c
| PRR 2437-2446
| 10
|
| 2024-01-03
|
|
|
ALCO FA-2
← →
| 1951-05
| 1a
| PRR 9608A-9619A
| 12
|
| 2022-03-10
|
|
|
ALCO FA-2
← →
| 1951-11 -
1951-12
| 1b
| PRR 9620A-9631A
| 12
|
| 2022-03-10
|
|
|
ALCO RS-11
← →
| 1956-08
| 1a1
| PRR 8617-8625
| 9
|
| 2023-11-20Revision history:
2021-08-01
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Cab moved rearward by 0.5" and lengthened by 0.5"
- Battery box and short hood side doors/grabirons moved rearward by 0.25"
- Side handrail stanchion spacing
- Cab sub-base door and hinge spacing
- Footboards and pilot plate
- Corrected too-short latch on hood door under air intake/intercooler (left side only)
2021-12-30
- Hood roof panels, hinges and exhaust housing
2022-03-23
- Coupler cut lever and pilot end handrail
- Horn manifold and back cap dimensions
2023-11-20
- Added missing step behind cab (right side)
|
|
|
ALCO RS-11
← →
| 1957-02 -
1957-05
| 1a1
| PRR 8626-8635
| 10
|
| 2023-11-20Revision history:
2019-08-21
- Decreased height of cab sub-base doors
- Revised base of handrail stanchion near long hood end
2020-11-04
- Narrower cab side window
2021-08-01
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Cab moved rearward by 0.5" and lengthened by 0.5"
- Battery box and short hood side doors/grabirons moved rearward by 0.25"
- Side handrail stanchion spacing
- Cab sub-base door and hinge spacing
- Footboards and pilot plate
- Corrected too-short latch on hood door under air intake/intercooler (left side only)
2021-12-30
- Hood roof panels, hinges and exhaust housing
2022-03-23
- Coupler cut lever and pilot end handrail
- Horn manifold and back cap dimensions
2023-11-20
- Added missing step behind cab (right side)
|
|
|
ALCO RS-11
← →
| 1957-11 -
1957-12
| 1a2
| PRR 8636-8654
| 19
|
| 2023-11-20Revision history:
2019-08-21
- Decreased height of cab sub-base doors
- Revised base of handrail stanchion near long hood end
2020-11-04
- Narrower cab side window
2021-08-01
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Cab moved rearward by 0.5" and lengthened by 0.5"
- Battery box and short hood side doors/grabirons moved rearward by 0.25"
- Side handrail stanchion spacing
- Cab sub-base door and hinge spacing
- Footboards and pilot plate
- Corrected too-short latch on hood door under air intake/intercooler (left side only)
2021-12-30
- Hood roof panels, hinges and exhaust housing
2022-03-23
- Coupler cut lever and pilot end handrail
- Horn manifold and back cap dimensions
2023-11-20
- Added missing step behind cab (right side)
|
|
|
ALCO RSD-12
← →
| 1957-12 -
1958-04
| 1a3
| PRR 8655-8679
| 25
|
| 2023-12-20Revision history:
2023-12-21
- Truck brake cylinders
|
|
|
EMD GP30
← →
| 1963-02 -
1963-05
| 1d
| PRR 2200-2220
| 21
|
| 2022-03-15Revision history:
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2021-01-01
- Corrected mismatched front right handrail (right side)
2022-01-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
- Corrected minor transparency glitch with front truck traction motor air ducts (right side)
2022-03-15
- Horn manifold and back cap dimensions
|
|
|
EMD GP30
← →
| "
| 1e
| PRR 2221-2251
| 31
|
| 2022-03-15Revision history:
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2021-01-01
- Corrected mismatched front right handrail (right side)
2022-01-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
- Corrected minor transparency glitch with front truck traction motor air ducts (right side)
2022-03-15
- Horn manifold and back cap dimensions
|
|
|
EMD GP35
← →
| 1964-05 -
1964-06
| 1b1
| PRR 2252-2296
| 45
|
| 2022-03-02Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-02
- Corrected mismatched front right handrail (right side)
- Added MU connector on end handrails
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
|
EMD GP35
← →
| 1964-11
| 1b3
| PRR 2297-2310
| 14
| 2309, 2310 re# 2250, 2251
| 2022-03-02Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-02
- Corrected mismatched front right handrail (right side)
- Added MU connector on end handrails
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
|
EMD GP35
← → →
| 1965-01 -
1965-04
| 1c1, 1c2
| PRR 2311-2370
| 60
| 2369, 2370 re# 2309, 2310
| 2022-03-02Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-01
- Corrected mismatched front right handrail (right side)
- Added MU connector on end handrails
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
|
EMD GP9
← →
| 1957-11 -
1959-12
| 3c
| PRR 7145-7269
| 125
|
| 2023-07-10Revision history:
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
|
EMD GP9B
← →
| 1957-11 -
1959-12
| 3c
| PRR 7175B-7204B, 7230B-7239B
| 40
|
| 2023-07-10Revision history:
2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
|
|
|
EMD SD35
← → →
| 1965-02 -
1965-05
| 1d1, 1d2
| PRR 6000-6039
| 40
|
| 2022-03-21Revision history:
2020-12-16
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
|
EMD SD40
← → → →
| 1966-02 -
1966-03
| 1a2, 1a3
| PRR 6040-6104
| 65
|
| 2022-03-21Revision history:
2017-05-30
- Removed rear flag holder
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake fans
- Removed extra bolt on exhaust stack housing
2018-01-02
- Added missing section of bell
2018-02-25
- Removed ballast plate above fuel tank
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
2019-01-23
- Relocated dynamic brakes
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear
2020-11-05
- Corrected line glitch in fuel filler (left side)
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2020-12-29
- Corrected mismatched front right handrail (PRR 6040-6054)
2021-01-02
- Added MU connector on end handrails
2021-01-10
- Fuel tank height and gap from underframe
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
|
EMD SD45
← →
| 1966-10 -
1967-02
| 1b1
| PRR 6105-6169
| 65
|
| 2022-03-21Revision history:
2014-12-31
- Underframe height
- Truck details and casting logos
2017-03-18
- Narrower cab sub-base ribs
- Cab side wind deflectors
2017-05-20
- Removed dynamic brake roof vent
- Revised handrail stanchion at rear of walkway blower duct
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-02
- Added MU connector on end handrails
2021-01-10
- Fuel tank height and gap from underframe
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
|
EMD SD45
← →
| 1967-12 -
1968-02
| 2a2
| PRR 6170-6234
| 65
|
| 2022-03-29Revision history:
2017-05-20
- Removed dynamic brake roof vent
- Revised handrail stanchion at rear of walkway blower duct
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-02
- Added MU connector on end handrails
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
