Drawings > Undecorated Drawings - By Type > EMD SD70M-2
Undecorated Drawings - EMD SD70M-2
| Selected scales: |
1:18 Drawings
| Model | Built | Phase | Numbers | Qty | Notes | Last modified |
|---|---|---|---|---|---|---|
| EMD SD70M-2 ← → | 2007-07 - 2007-11 | 2e1 | CN 8800-8849 | 50 | 2022-03-30Revision history:
2016-10-08 - Added missing rear platform lights on the hood end - Center hood door height - Large rear hood intake height 2017-09-19 - Revised truck traction pin (near center axle on trucks) - Added minor truck details (bolts under axles and pins at radial-steering arm ends) - Smaller radiator fan diameter and spacing, fans moved rearward - Added missing section of air pipe behind front steps (left side) - Removed seam at rear of cab (left side) 2017-11-11 - Corrected minor glitch in front truck traction pin (left side) 2017-12-17 - Revised cables/pipes under back of cab (right side) 2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Added missing portion of brake levers near brake cylinders - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points | |
| EMD SD70M-2 ← → | " | " | " | " | as modified | 2022-03-30Revision history:
2016-10-08 - Added missing rear platform lights on the hood end - Center hood door height - Large rear hood intake height 2017-09-19 - Revised truck traction pin (near center axle on trucks) - Added minor truck details (bolts under axles and pins at radial-steering arm ends) - Smaller radiator fan diameter and spacing, fans moved rearward - Added missing section of air pipe behind front steps (left side) - Removed seam at rear of cab (left side) 2017-11-11 - Corrected minor glitch in front truck traction pin (left side) 2017-12-17 - Revised cables/pipes under back of cab (right side) 2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Added missing portion of brake levers near brake cylinders - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points |
| EMD SD70M-2 ← → | 2008-11 - 2010-03 | 2e3 | CN 8850-8914 | 65 | 2022-03-30Revision history:
2016-10-08 - Added missing rear platform lights on the hood end - Center hood door height - Large rear hood intake height - Revised intake under radiators (left side) 2017-09-19 - Revised truck traction pin (near center axle on trucks) - Added minor truck details (bolts under axles and pins at radial-steering arm ends) - Smaller radiator fan diameter and spacing, fans moved rearward - Added missing section of air pipe behind front steps (left side) 2017-11-11 - Corrected minor glitch in front truck traction pin (left side) 2017-12-17 - Revised cables/pipes under back of cab (right side) - Revised handbrake (changed from Phase 2e2 to 2e3) 2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Added missing portion of brake levers near brake cylinders - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points | |
| EMD SD70M-2 ← → | 2010-10 - 2011-02 | 2f | CN 8915-8964 | 50 | 2022-03-30Revision history:
2016-10-08 - Added missing rear platform lights on the hood end - Center hood door height - Large rear hood intake height - Revised intake under radiators (left side) 2017-09-19 - Revised truck traction pin (near center axle on trucks) - Added minor truck details (bolts under axles and pins at radial-steering arm ends) - Smaller radiator fan diameter and spacing, fans moved rearward - Added missing section of air pipe behind front steps (left side) 2017-11-11 - Relocated hole below handbrake wheel (right side) - Corrected minor glitch in front truck traction pin (left side) 2017-12-17 - Revised cables/pipes under back of cab (right side) 2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Added missing portion of brake levers near brake cylinders - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points | |
1:36 Drawings
| Model | Built | Phase | Numbers | Notes |
|---|---|---|---|---|
| EMD SD70M-2 ← → | 2005-12 - 2006-04 | 2a1 | CN 8000-8024 | |
| EMD SD70M-2 ← → | " | " | " | as modified |
| EMD SD70M-2 ← → | 2007-07 - 2007-11 | 2e1 | CN 8800-8849 | |
| EMD SD70M-2 ← → | 2008-11 - 2010-03 | 2e2 | CN 8850-8914 | |
| EMD SD70M-2 ← → | 2010-09 - 2011-02 | 2f | CN 8915-8964 | |
| EMD SD70M-2 ← → | " | " | " | as modified |
| EMD SD70M-2 ← → | 2006-12 | 2a1 | FEC 100-103 | |
| EMD SD70M-2 ← → | 2008 | 2f | FEC 104-107 | |
| EMD SD70M-2 ← → | 2005-10 - 2006-01 | 2a1 | NS 2649-2700 | |
| EMD SD70M-2 ← → | 2006-01 - 2006-05 | 2a1 | NS 2701-2778 | |
1:55 Drawings
| Model | Phase | Numbers | Notes | Accuracy |
|---|---|---|---|---|
| EMD SD70M-2 ← → | 2a1 | CN 8000-8024 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD70M-2 ← → | 2a1 | EMDX 74-76 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD70M-2 ← → | 2a1 | FEC 100-103 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD70M-2 ← → | 2a1 | NS 2649-2700 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD70M-2 ← → | 2a1 | NS 2701-2778 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
See also: