Undecorated Drawings - SAL
Selected scales: |
1:18 Drawings
Model | Built | Phase | Numbers | Notes | Last modified |
---|---|---|---|---|---|
ALCO C-420 ← → | 1965-05 - 1965-08 | 2b | SAL 110-135 | 2023-08-20Revision history:
2023-08-20 - Changed battery boxes from bolted to hinged | |
ALCO RS-11 ← → | 1960-06 | 2a2 | SAL 100-109 | 2023-12-17Revision history:
2020-11-04 - Narrower cab side window - Removed short hood doors (left side) - Corrected minor line glitch in front sanding line (left side) - Changed brake wheel from surface-mounted to recessed (right side) 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail - Horn manifold and back cap dimensions 2023-12-17 - Corrected number of radiator shutters | |
EMD GP18 ← → | 1960-08 - 1960-09 | 1 | SAL 400-409 | 2023-07-10Revision history:
2020-12-05 - Increased handrail thickness - Revised radiator and dynamic brake fans 2022-01-03 - Larger roof lift rings - Added lift rings around dynamic brakes - Added lift rings on short hood - Removed grabiron behind rear fan - Exhaust stacks 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Footboard height increased by 1.25" - Revised coupler carrier / draft gear - Horn manifold and back cap dimensions 2022-11-15 - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-07 - Removed handrail stanchion top clamps 2023-02-16 - Fuel tank height - Fuel filler 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) | |
EMD GP30 ← → | 1962-11 - 1963-01 | 1c2 | SAL 500-533 | 2022-03-15Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2015-01-20 - Revised radiator intakes - distinction between Phases 1a-1c2 vs. 1d-2b 2015-07-26 - Removed angled walkway plate from top step - Revised engine room door height (0.5" lower) - Corrected broken line in cab roof (right-side view) 2016-02-27 - Corrected pilots, support plates and footboards (representing GP18-GP30 version rather than GP35 and later version) 2017-09-02 - Corrected minor line glitch on latches on first engine room door - Revised coupler pockets - Corrected mismatched hood seams behind conductor's side inertial air intake - Revised center radiator fan (changed to cap-top instead of open-top) 2017-10-07 - Revised bottom hatches on hood ends - Removed bottom hatch latch hooks on short hood 2019-07-31 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors narrowed by 0.75" - Middle hood doors narrowed by 0.25" - Increased height of walkway blower duct and bottom of hood doors 2020-12-06 - Increased handrail thickness - Revised radiator fans (48" fans) 2022-01-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts - Corrected minor transparency glitch with front truck traction motor air ducts (right side) 2022-03-15 - Horn manifold and back cap dimensions | |
GE U30B ← → | 1967-01 - 1967-02 | 1a | SAL 800-814 | 2022-03-15Revision history:
2022-03-15 - Horn manifold and back cap dimensions |
1:55 Drawings
Model | Phase | Numbers | Notes | Accuracy |
---|---|---|---|---|
ALCO C-420 ← | 1 | SAL version | *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
ALCO C-420 ← | 2 | SAL version | *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP40 ← → | 1a3 | SAL 600-650 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP40M-3 ← → | TM 1161, 1164, 1167, 1168 | ex-SAL | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE U30B ← → | 1a | SAL 800-814 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
See also: