Undecorated Drawings - SOU
Selected scales: |
1:18 Drawings
Model | Built | Phase | Numbers | Notes | Last modified |
---|---|---|---|---|---|
EMD GP30 ← → | 1962-08 - 1962-11 | 1b2 | SOU 2525-2584 | 2022-02-04Revision history:
2020-12-06 - Increased handrail thickness - Revised radiator fans (48" fans) 2022-01-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts - Corrected minor transparency glitch with front truck traction motor air ducts (right side) | |
EMD GP30 ← → | 1963-09 - 1963-11 | 2b | SOU 2585-2644 | 2022-02-04Revision history:
2020-12-06 - Increased handrail thickness - Revised radiator fans (48" fans) 2020-12-27 - MU connector housing 2022-01-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts - Corrected minor transparency glitch with front truck traction motor air ducts (right side) | |
EMD GP35 ← → | 1963-12 | 1a1 | SOU 210-214 | High short hood Central of Georgia | 2022-02-04Revision history:
2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Dynamic brake housing dimensions and shape - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts |
EMD GP35 ← → → | 1964-12 - 1965-04 | 1c1, 1c2 | SOU 2645-2702, 2705-2715 | Type B Trucks; high short hood 2705-2715 Savannah & Atlanta | 2022-02-04Revision history:
2021-02-09 - Added missing end transoms on trucks 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Dynamic brake housing dimensions and shape |
EMD GP35 ← → | 1965-02 | 1c1 | SOU 2703-2704 | High short hood | 2022-02-04Revision history:
2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Dynamic brake housing dimensions and shape - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts |
EMD GP38-2 ← → | 1972-01 - 1972-03 | 1a | SOU 5000-5054 | High short hood | 2023-10-25Revision history:
2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-07 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2023-01-09 - Long hood end seams 2023-10-25 - Nathan P-series horn dimensions |
EMD GP38-2 ← → | 1972-12 - 1973-10 | 1b2 | SOU 5055-5103 | High short hood; SOU 5055-5058 were Phase 1b1 | 2023-10-25Revision history:
2020-01-11 - Revised speed recorder (conductor's side) 2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-07 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2023-01-09 - Long hood end seams 2023-10-25 - Nathan P-series horn dimensions |
EMD GP38-2 ← → | 1974-01 - 1974-11 | 1b2 | SOU 5104-5162 | High short hood | 2023-10-25Revision history:
2020-01-11 - Revised speed recorder (conductor's side) 2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-07 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2023-01-09 - Long hood end seams 2023-10-25 - Nathan P-series horn dimensions |
EMD GP38AC ← → | 1971-04 - 1971-10 | 2c | SOU 2823-2878 | High short hood | 2023-10-25Revision history:
2020-01-11 - Added stepwell lights - Lowered flag holder (right side) 2020-12-04 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-09 - Fuel tank height and gap from underframe 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2023-10-25 - Bottom latch on second hood door - Nathan P-series horn dimensions |
EMD GP39X ← → | 1980-11 | 1a2 | SOU 4600-4605 | GP49 carbody, frame | 2023-12-28Revision history:
2014-10-23 - Truck shape and casting logos 2016-04-07 - Added conductor's side short hood hatch - Added short hood flag brackets - Removed engineer's side fuel gauge and short hood light - Revised end handrails 2020-01-05 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-16 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-12 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height 2022-12-27 - Fuel tank details - Added roof vent ahead of cab |
EMD GP40X ← → | 1978-06 | SOU 7000-7002 | 2023-01-02 | ||
EMD GP50 ← → | 1980-08 - 1980-09 | 1a1 | SOU 7003-7007, 7017-7035 | 2022-12-27Revision history:
2013-01-25 - Central air intake, dynamic brake housing (right side) 2013-03-05 - Corner handrails, pilot braces, rear end plate - Traction motor cables 2014-02-17 - Truck shape and casting logo 2014-10-23 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) 2016-04-07 - Added conductor's side short hood hatch - Added short hood flag brackets - Removed engineer's side fuel gauge (Phase 1a2 version) and short hood light - Revised end handrails 2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-11 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height 2022-12-27 - Fuel tank details - Added roof vent ahead of cab | |
EMD GP50 ← → | 1980-09 - 1980-12 | 1a2 | SOU 7008-7016, 7036-7072 | 2022-12-27Revision history:
2013-01-25 - Central air intake, dynamic brake housing (right side) 2013-03-05 - Corner handrails, pilot braces, rear end plate - Traction motor cables 2014-02-17 - Truck shape and casting logo 2014-10-23 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) 2016-04-07 - Added conductor's side short hood hatch - Added short hood flag brackets - Removed engineer's side fuel gauge (Phase 1a2 version) and short hood light - Revised end handrails 2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-11 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height 2022-12-27 - Fuel tank details - Added roof vent ahead of cab | |
EMD GP50 ← → | 1981-04 - 1981-06 | 1a2 | SOU 7073-7092 | 2022-12-27Revision history:
2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-11 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height 2022-12-27 - Fuel tank details - Added roof vent ahead of cab | |
EMD SD35 ← → | 1965-09 - 1966-01 | 3 | SOU 215-224, 3000-3099 | 2022-03-21Revision history:
2020-12-16 - Increased handrail thickness - Revised radiator and dynamic brake fans (48" fans) 2020-12-28 - Removed cab awning and flag bracket - Relocated front left walkway light - Added speed recorder - Added ATS shoe 2021-01-13 - Fuel tank height and gap from underframe - Fuel tank vent pipe (increased diameter, revised fittings) - Handrail stanchions above fuel tank (left side) 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points | |
EMD SD40 ← → | 1971-04 | 2c | SOU 3170-3185 | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-12-05 - Added sand pipes running below walkway sideframe | |
EMD SD40 ← → | 1972-01 | 3 | SOU 3186-3200 | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake fans - Removed extra bolt on exhaust stack housing 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Relocated dynamic brakes - Revised exhaust stack 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-12-05 - Added sand pipes running below walkway sideframe | |
EMD SD40-2 ← ← → | 1972-12 - 1974-01 | 1a2 | SOU 3201-3216, 3217-3243 | High short hood | 2023-01-09Revision history:
2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Corrected minor line glitch on latches on first engine room door - Revised exhaust stack 2020-12-18 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) - Adjusted height of center hinge of engine room doors - Added missing line segment in traction motor cables above fuel filler (left side) 2021-01-09 - Fuel tank height and gap from underframe 2022-03-19 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2023-01-09 - Long hood end seams |
EMD SD40-2 ← → | 1975-07 | 1b1 | SOU 3244-3254 | High short hood | 2023-01-09Revision history:
2017-09-26 - Revised position of lift ring and flag holder at rear of long hood - Corrected minor line glitch on latches on first engine room door 2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised exhaust stack 2020-12-18 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) - Adjusted height of center hinge of engine room doors - Added missing line segment in traction motor cables above fuel filler (left side) 2021-01-09 - Fuel tank height and gap from underframe 2022-03-19 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-11 - Air pipe routing through plow, behind steps and through underframe 2023-01-09 - Long hood end seams |
EMD SD40-2 ← → | 1978-01 - 1978-02 | 2a2 | SOU 3255-3287 | High short hood | 2023-01-09Revision history:
2016-04-19 - Corrected end handrail error 2017-09-26 - Revised position of lift ring and flag holder at rear of long hood - Corrected minor line glitch on latches on first engine room door 2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised exhaust stack 2020-12-18 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) - Adjusted height of center hinge of engine room doors - Added missing line segment in traction motor cables above fuel filler (left side) 2021-01-09 - Fuel tank height and gap from underframe 2022-03-19 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-11 - Air pipe routing through plow, behind steps and through underframe 2023-01-09 - Long hood end seams |
EMD SD40-2 ← → | " | 2a3 | " | High short hood | 2023-01-09Revision history:
2016-04-19 - Corrected end handrail error 2017-09-26 - Revised position of lift ring and flag holder at rear of long hood - Corrected minor line glitch on latches on first engine room door 2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised exhaust stack 2020-12-18 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) - Adjusted height of center hinge of engine room doors - Added missing line segment in traction motor cables above fuel filler (left side) 2021-01-09 - Fuel tank height and gap from underframe 2022-03-19 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-11 - Air pipe routing through plow, behind steps and through underframe 2023-01-09 - Long hood end seams |
EMD SD40-2 ← → | 1978-05 - 1978-06 | 2a4 | SOU 3288-3302 | High short hood | 2023-01-09Revision history:
2016-04-19 - Corrected end handrail error 2017-09-26 - Revised position of lift ring and flag holder at rear of long hood - Corrected minor line glitch on latches on first engine room door 2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised exhaust stack 2020-12-18 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) - Adjusted height of center hinge of engine room doors - Added missing line segment in traction motor cables above fuel filler (left side) 2021-01-09 - Fuel tank height and gap from underframe 2022-03-19 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-11 - Air pipe routing through plow, behind steps and through underframe 2023-01-09 - Long hood end seams |
EMD SD40-2 ← → | 1979-02 - 1979-06 | 2b1 | SOU 3303-3328 | High short hood | 2023-01-09Revision history:
2016-04-19 - Corrected end handrail error 2017-09-26 - Revised position of lift ring and flag holder at rear of long hood - Corrected minor line glitch on latches on first engine room door 2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised exhaust stack 2020-12-18 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) - Adjusted height of center hinge of engine room doors - Added missing line segment in traction motor cables above fuel filler (left side) 2021-01-09 - Fuel tank height and gap from underframe 2022-03-19 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-11 - Air pipe routing through plow, behind steps and through underframe 2023-01-09 - Long hood end seams |
EMD SD45 ← → → | 1967-11 - 1967-12 | 2a3 | SOU 3105-3121, 3122-3159 | High short hood | 2022-03-29Revision history:
2017-05-20 - Removed dynamic brake roof vent 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box - Corrected glitch in cab eave drip rail 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points |
EMD SD45 ← → | 1970-03 | 2b2 | SOU 3100-3104, 3160-3169 | High short hood | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box - Corrected glitch in cab eave drip rail 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points |
GE B23-7 ← → | 1978-09 - 1979-01 | 1c | SOU 3970-3989 | 2022-08-02Revision history:
2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets | |
GE B23-7 ← → | 1981-02 - 1981-04 | 3a | SOU 3990-4023 | 2023-11-11Revision history:
2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Removed extra cab side windows 2023-11-11 - Increased underframe height | |
GE B30-7A ← → | 1982-04 | 3c | SOU 3500-3521 | Unofficially referred to as B30-7A1 | 2023-11-11Revision history:
2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Removed extra cab side windows 2023-11-11 - Increased underframe height |
GE B36-7 ← → | 1981-03 | 3a | SOU 3815-3820 | 2023-11-11Revision history:
2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Removed extra cab side windows 2023-11-11 - Increased underframe height | |
GE U23B ← → | 1973-05 | 2g | SOU 3905-3914 | 2022-02-10Revision history:
2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets | |
GE U23B ← → | 1974-05 - 1974-06 | 2g | SOU 3915-3934 | 2022-02-10Revision history:
2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets | |
GE U23B ← → | 1975-05 - 1975-07 | 2h3 | SOU 3935-3954 | 2022-02-10Revision history:
2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets | |
GE U23B ← → | 1976-12 - 1977-02 | 2h4 | SOU 3955-3969 | 2022-02-10Revision history:
2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets |
1:55 Drawings
Model | Phase | Numbers | Notes | Accuracy |
---|---|---|---|---|
EMD GP30 ← → | 1b2 | SOU 2525-2584 | High short hood | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD GP30 ← → | 2b | SOU 2585-2644 | High short hood | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD GP35 ← → | 1c | SOU 2645-2702, 2705-2715 | High short hood Type B trucks | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD GP38 ← → | 2b | SOU 2716-2822 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38 ← → | " | " | As modified | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD GP38-2 ← → | 1a | SOU 5000-5054 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38-2 ← → | 1b | SOU 5104-5162 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38-2 ← → | 1c | SOU 5172-5256 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38AC ← → | 2c | SOU 2823-2878 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38AC ← → | " | " | As modified | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD GP39X ← | SOU 4600-4605 | *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD GP40X ← → | SOU 7000-7002 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD GP50 ← → | 1a2 | SOU 7008-7016, 7036-7092 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD24 ← → | SOU 2502-2524, 6305-6325, 6950-6953 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD40-2 ← → | 1a2 | SOU 3201-3243 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD40-2 ← → | 2a2, 2a3 | SOU 3255-3287 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD40-2 ← → | 2b1 | SOU 3303-3328 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD45 ← → | SOU version | *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
See also: