Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - CP

Selected scales:


1:18 Drawings

Model Built Phase Numbers Notes Last modified
EMD GP20C-ECO
  
2012 -
2014
CP 2200-2329
2022-12-12Revision history:

2020-12-15
- Revised side handrail stanchions
- Increased handrail thickness
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-11
- Fuel tank height and gap from underframe

2022-12-12
- Coupler cut levers
- Corner handrail end plate attachment points
GE AC4400CW
   
1995-08 -
1995-10
1a3, 1a4 CP 9500-9543, 9544-9582
2022-11-11Revision history:

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
GE AC4400CW
   
1997-09 -
1998-12
1f, 1g1 CP 8500-8580, 9583-9683
2022-11-14Revision history:

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts

2022-11-14
- Narrower steps
- Added step light behind battery boxes (right side)
GE AC4400CW
   
2001-09 -
2003-01
2a2, 2b CP 8600-8655, 9700-9740
2022-11-14Revision history:

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts

2022-11-14
- Narrower steps
- Added step light behind battery boxes (right side)
GE AC4400CW
  
2003-07 -
2003-09
2c CP 9750-9784
2022-11-14Revision history:

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts

2022-11-14
- Narrower steps
- Added step light behind battery boxes (right side)
GE AC4400CW
  
2004-04 -
2004-06
2c CP 9800-9840
2022-11-14Revision history:

2021-01-04
- Increased corner handrail thickness
- Revised end handrail stanchions

2022-11-11
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts

2022-11-14
- Narrower steps
- Added step light behind battery boxes (right side)
GMD GP30
  
1963-03 1c2 CP 8200-8201
re# 5000-5001
2022-02-04Revision history:

2014-10-24
- Radiator fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2015-01-20
- Revised radiator intakes - distinction between Phases 1a-1c2 vs. 1d-2b

2016-02-08
- Revised rear headlight housing contour

2017-09-02
- Corrected minor line glitch on latches on first engine room door
- Revised coupler pockets
- Corrected mismatched hood seams behind conductor's side inertial air intake
- Revised center radiator fan (changed to cap-top instead of open-top)

2017-10-07
- Revised bottom hatches on hood ends
- Removed bottom hatch latch hooks on short hood

2019-07-31
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors narrowed by 0.75"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors

2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)

2021-01-04
- Removed pilot grabirons

2022-01-30
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
- Corrected minor transparency glitch with front truck traction motor air ducts (right side)
GMD GP35
  
1964-05 -
1965-08
1a CP 8202-8213
re#5002-5013
2022-02-04Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2016-02-08
- Revised rear headlight housing contour

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
- Corrected corner handrail length

2021-01-04
- Removed pilot grabirons

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
GMD GP35
  
1964-05 -
1965-08
1b CP 5014-5023
2022-02-04Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2016-02-08
- Revised rear headlight housing contour

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
- Corrected corner handrail length

2021-01-04
- Removed pilot grabirons

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
GMD GP35
  
1966-01 1c CP 5024-5025
2022-02-04Revision history:

2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos

2016-02-08
- Revised rear headlight housing contour

2018-11-11
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood

2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
- Corrected corner handrail length

2021-01-04
- Removed pilot grabirons

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
GMD GP38-2
  
1983-03 -
1983-06
3a CP 3021-3040 2023-01-10
GMD GP38-2
  
1985-10 -
1986-07
3b CP 3041-3135 2023-01-10
GMD GP38AC
  
1970-05 -
1971-02
CP 3000-3020
2023-01-09Revision history:

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2020-12-04
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-01-09
- Changed panel under headlight from round to flat
- Corrected minor line glitches near stairwells
GMD GP9
  
1954-10 -
1955-01
1a CP 8483-8500
2023-07-10Revision history:

2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
GMD GP9
  
1955-05 -
1955-08
1b CP 8530-8546
2023-07-10Revision history:

2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
GMD GP9
  
1956-07 -
1957-11
2a CP 8611-8708 8702-8708 Phase 2b
2023-07-10Revision history:

2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
GMD GP9
  
1958-01 -
1958-03
2b CP 8801-8823
2023-07-10Revision history:

2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
GMD GP9
  
1959-07 -
1959-08
3a CP 8825-8839
2023-07-10Revision history:

2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
GMD SD40
  
1966-07 -
1966-12
CP 5500-5531 2022-11-09
GMD SD40
  
1967-01 -
1967-04
CP 5532-5564 2022-11-09
GMD SD40-2
  
1972-02 -
1972-07
1a1 CP 5565-5628
2023-01-09Revision history:

2016-12-14
- Removed plate between bell bracket

2019-08-12
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door

2020-12-19
- Revised side handrail stanchions
- Increased handrail thickness
- Corrected rear corner handrail length (right side)
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Added missing line segment in traction motor cables above fuel filler (left side)

2021-01-09
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-01-09
- Long hood end seams
- Flag holders and lift rings under radiator intakes
GMD SD40-2
  
1972 1a2 CP 5629-5658 Built by EMD to GMD/CP specs
2023-01-09Revision history:

2016-12-14
- Removed plate between bell bracket

2019-08-12
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door

2020-12-19
- Revised side handrail stanchions
- Increased handrail thickness
- Corrected rear corner handrail length (right side)
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Added missing line segment in traction motor cables above fuel filler (left side)

2021-01-09
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-01-09
- Long hood end seams
- Flag holders and lift rings under radiator intakes
GMD SD40-2
  
1973-04 -
1973-06
1b CP 5659-5674
2023-01-09Revision history:

2016-12-14
- Removed plate between bell bracket

2019-08-12
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door

2020-12-19
- Revised side handrail stanchions
- Increased handrail thickness
- Corrected rear corner handrail length (right side)
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Added missing line segment in traction motor cables above fuel filler (left side)

2021-01-09
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-01-09
- Long hood end seams
- Flag holders and lift rings under radiator intakes
GMD SD40-2
  
1974-11 -
1974-12
1b CP 5800-5805, 5836 Locotrol masters
2023-01-09Revision history:

2016-12-14
- Removed plate between bell bracket
- Removed air dryer on engineer's side

2019-08-12
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door

2020-12-19
- Revised side handrail stanchions
- Increased handrail thickness
- Corrected rear corner handrail length (right side)
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Added missing line segment in traction motor cables above fuel filler (left side)

2021-01-09
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-01-09
- Long hood end seams
- Flag holders and lift rings under radiator intakes
GMD SD40-2
  
1974-12 -
1975-02
1b CP 5675-5717 5702-5715 Locotrol remotes
others lack cab antenna
2023-01-09Revision history:

2016-12-14
- Removed plate between bell bracket
- Removed air dryer on engineer's side

2019-08-12
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door

2020-12-19
- Revised side handrail stanchions
- Increased handrail thickness
- Corrected rear corner handrail length (right side)
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Added missing line segment in traction motor cables above fuel filler (left side)

2021-01-09
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-01-09
- Long hood end seams
- Flag holders and lift rings under radiator intakes
GMD SD40-2
  
1975-09 -
1976-02
1b CP 5718-5777 5758-5772 Locotrol remotes
others lack cab antenna
2023-01-09Revision history:

2016-12-14
- Removed plate between bell bracket
- Removed air dryer on engineer's side

2019-08-12
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door

2020-12-19
- Revised side handrail stanchions
- Increased handrail thickness
- Corrected rear corner handrail length (right side)
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Added missing line segment in traction motor cables above fuel filler (left side)

2021-01-09
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-01-09
- Long hood end seams
- Flag holders and lift rings under radiator intakes
GMD SD40-2
  
1977-10 -
1979-01
2a CP 5778-5799, 5837-5864, 5900-5912 5837-5869 Locotrol remotes
others lack cab antenna
2023-01-09Revision history:

2016-12-14
- Removed plate between bell bracket
- Removed air dryer on engineer's side
- Revised center axle shock strut
- Shorter corner handrails
- Added fuel gauge on front of fuel tank

2017-01-21
- Removed casting hole from jacking pads

2019-08-12
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door

2020-12-19
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Added missing line segment in traction motor cables above fuel filler (left side)

2021-01-09
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-01-09
- Long hood end seams
- Flag holders and lift rings under radiator intakes
GMD SD40-2
  
1979-01 2a CP 5913-5914
2023-01-09Revision history:

2016-12-14
- Removed plate between bell bracket
- Removed air dryer on engineer's side
- Revised center axle shock strut
- Shorter corner handrails
- Added fuel gauge on front of fuel tank

2017-01-21
- Removed casting hole from jacking pads

2019-08-12
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door

2020-12-19
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Added missing line segment in traction motor cables above fuel filler (left side)

2021-01-09
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-01-09
- Long hood end seams
- Flag holders and lift rings under radiator intakes
GMD SD40-2
  
1979-10 -
1979-11
2b CP 5915-5949
2023-01-09Revision history:

2017-01-21
- Removed casting hole from jacking pads

2019-08-12
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door

2020-12-19
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Added missing line segment in traction motor cables above fuel filler (left side)

2021-01-09
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-01-09
- Long hood end seams
- Flag holders and lift rings under radiator intakes
GMD SD40-2
  
1980-10 -
1981-03
2c CP 5560:2, 5950-6024
2023-01-09Revision history:

2019-08-12
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door

2020-12-19
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Added missing line segment in traction motor cables above fuel filler (left side)

2021-01-09
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-01-09
- Long hood end seams
- Flag holders and lift rings under radiator intakes
GMD SD40-2
  
1982-12 -
1983-02
2d CP 6025-6037
2023-01-09Revision history:

2019-08-12
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door

2020-12-19
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)

2021-01-09
- Fuel tank height and gap from underframe

2022-01-05
- Corrected line glitch on winterization hatch

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2023-01-09
- Long hood end seams
- Flag holders and lift rings under radiator intakes
GMD SD40-2F
  
1988-11 -
1988-12
CP 9000-9024
2023-01-09Revision history:

2020-12-22
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Cab corners and sub-base doors
- Sand hoses

2021-01-09
- Fuel tank height and gap from underframe

2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points

2022-01-09
- Truck axle bearing housings
GMD SD40-2F
  
" " As modified
2023-01-09Revision history:

2020-12-22
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Cab corners and sub-base doors
- Sand hoses

2021-01-09
- Fuel tank height and gap from underframe

2022-12-01
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points

2022-01-09
- Truck axle bearing housings
MLW C-424
  
1965 3a CP 4201-4209 4201 originally numbered 8301
2024-01-03Revision history:

2017-01-19
- Added missing end transoms to Type B trucks
- Added short hood top grabiron (left side)
- Revised rooftop dynamic brake vents

2017-10-07
- Revised dimensions of dynamic brake hatch

2021-12-30
- Hood roof panels and hinges

2022-03-04
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved rearward by 0.5"
- Front/rear hood ends moved inward by 0.25"
- Hood length reduced by 0.75" (length removed in 4 doors under exhaust stack)
- Coupler cut lever thickness and height

2024-01-03
- Hood door latches
MLW C-424
  
1965 3a CP 4210-4232
2024-01-03Revision history:

2017-01-19
- Added missing end transoms to Type B trucks
- Added short hood top grabiron (left side)
- Revised rooftop dynamic brake vents

2017-10-07
- Revised dimensions of dynamic brake hatch

2021-12-30
- Hood roof panels and hinges

2022-03-04
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved rearward by 0.5"
- Front/rear hood ends moved inward by 0.25"
- Hood length reduced by 0.75" (length removed in 4 doors under exhaust stack)
- Coupler cut lever thickness and height

2024-01-03
- Hood door latches
MLW C-424
  
" " CP 4201-4232 As modified
2022-03-04Revision history:

2017-01-19
- Added missing end transoms to Type B trucks
- Added short hood top grabiron (left side)
- Revised rooftop dynamic brake vents

2017-10-07
- Revised dimensions of dynamic brake hatch

2021-12-30
- Hood roof panels and hinges

2022-03-04
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved rearward by 0.5"
- Front/rear hood ends moved inward by 0.25"
- Hood length reduced by 0.75" (length removed in 4 doors under exhaust stack)
- Coupler cut lever thickness and height
MLW C-424
  
" " CP 4202-4206, 4210, 4211, 4213-4215, 4220, 4223, 4228 As modified
Alternator from retired M-630
2022-03-04Revision history:

2017-01-19
- Added missing end transoms to Type B trucks
- Added short hood top grabiron (left side)
- Revised rooftop dynamic brake vents

2017-10-07
- Revised dimensions of dynamic brake hatch

2021-12-30
- Hood roof panels and hinges

2022-03-04
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved rearward by 0.5"
- Front/rear hood ends moved inward by 0.25"
- Hood length reduced by 0.75" (length removed in 4 doors under exhaust stack)
- Coupler cut lever thickness and height
MLW C-424
  
1965 -
1966
3b CP 4233-4250
2024-01-03Revision history:

2017-01-19
- Added missing end transoms to Type B trucks
- Added short hood top grabiron (left side)
- Revised rooftop dynamic brake vents

2017-10-07
- Revised dimensions of dynamic brake hatch

2021-12-30
- Hood roof panels and hinges

2022-03-04
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved rearward by 0.5"
- Front/rear hood ends moved inward by 0.25"
- Hood length reduced by 0.75" (length removed in 4 doors under exhaust stack)
- Coupler cut lever thickness and height

2024-01-03
- Hood door latches
MLW C-424
  
" " " As modified
2022-03-04Revision history:

2017-01-19
- Added missing end transoms to Type B trucks
- Added short hood top grabiron (left side)
- Revised rooftop dynamic brake vents

2017-10-07
- Revised dimensions of dynamic brake hatch

2021-12-30
- Hood roof panels and hinges

2022-03-04
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved rearward by 0.5"
- Front/rear hood ends moved inward by 0.25"
- Hood length reduced by 0.75" (length removed in 4 doors under exhaust stack)
- Coupler cut lever thickness and height
MLW C-424
  
" " CP 4234 As modified
Alternator from retired M-630
2022-03-04Revision history:

2017-01-19
- Added missing end transoms to Type B trucks
- Added short hood top grabiron (left side)
- Revised rooftop dynamic brake vents

2017-10-07
- Revised dimensions of dynamic brake hatch

2021-12-30
- Hood roof panels and hinges

2022-03-04
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved rearward by 0.5"
- Front/rear hood ends moved inward by 0.25"
- Hood length reduced by 0.75" (length removed in 4 doors under exhaust stack)
- Coupler cut lever thickness and height
MLW C-424
  
" " CP 4244 As modified
Alternator from retired M-630
2022-03-04Revision history:

2017-01-19
- Added missing end transoms to Type B trucks
- Added short hood top grabiron (left side)
- Revised rooftop dynamic brake vents

2017-10-07
- Revised dimensions of dynamic brake hatch

2021-12-30
- Hood roof panels and hinges

2022-03-04
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved rearward by 0.5"
- Front/rear hood ends moved inward by 0.25"
- Hood length reduced by 0.75" (length removed in 4 doors under exhaust stack)
- Coupler cut lever thickness and height
MLW M-630
  
1969 -
1970
CP 4508-4512;
4513-4516, re# 4558-4561;
4550-4555;
4570-4573;
4574-4575, re# 4562-4563
2022-10-14Revision history:

2014-10-23
- Truck casting logos

2016-02-06
- Removed end drop steps

2016-02-22
- Added minor truck casting details

2018-12-03
- Added missing intake on right side behind cab

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-630
  
" " As modified
2022-10-14Revision history:

2014-01-07
- Added walkway over central air intake

2014-10-23
- Truck casting logos

2016-02-22
- Added minor truck casting details

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-630
  
1970 CP 4556-4557;
4576-4581, re# 4564-4569
2022-10-14Revision history:

2014-10-23
- Truck casting logos

2016-02-06
- Removed end drop steps

2016-02-22
- Added minor truck casting details

2018-12-03
- Added missing intake on right side behind cab

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-630
  
" CP 4556-4557, 4564, 4566-4569 As modified
2022-10-14Revision history:

2016-02-22
- Added minor truck casting details

2018-12-03
- Added missing intake on right side behind cab

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-630
  
" CP 4565 "
2022-10-14Revision history:

2014-01-07
- Added walkway over central air intake

2014-10-23
- Truck casting logos

2016-02-22
- Added minor truck casting details

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-636
  
1969 CP 4700-4704
2022-10-14Revision history:

2014-01-07
- Revised speed recorders

2014-10-23
- Truck casting logos

2016-02-06
- Removed end drop steps

2016-02-22
- Added minor truck casting details

2018-12-03
- Added missing intake on right side behind cab

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-636
  
" " As modified
2022-10-14Revision history:

2014-01-07
- Added walkway over central air intake
- Revised speed recorders

2014-10-23
- Truck casting logos

2016-02-22
- Added minor truck casting details

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-636
  
1969 -
1970
CP 4705-4727
2022-10-14Revision history:

2014-01-07
- Revised speed recorders

2014-10-23
- Truck casting logos

2016-02-06
- Removed end drop steps

2016-02-22
- Added minor truck casting details

2018-12-03
- Added missing intake on right side behind cab

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-636
  
" " As modified
2022-10-14Revision history:

2014-01-07
- Added walkway over central air intake
- Revised speed recorders

2014-10-23
- Truck casting logos

2016-02-22
- Added minor truck casting details

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-636
  
" CP 4707, 4722 "
2022-10-14Revision history:

2016-02-22
- Added minor truck casting details

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-636
  
1970 CP 4728
2022-10-14Revision history:

2014-01-07
- Revised speed recorders

2014-10-23
- Truck casting logos

2016-02-06
- Removed end drop steps

2016-02-22
- Added minor truck casting details

2018-12-03
- Added missing intake on right side behind cab

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-636
  
" " As modified
2022-10-14Revision history:

2014-10-23
- Truck casting logos

2016-02-22
- Added minor truck casting details

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-636
  
1970 CP 4729-4743
2022-10-14Revision history:

2014-01-07
- Revised speed recorders

2014-10-23
- Truck casting logos

2016-02-06
- Removed end drop steps

2016-02-22
- Added minor truck casting details

2018-12-03
- Added missing intake on right side behind cab

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-636
  
" " As modified
2022-10-14Revision history:

2016-02-22
- Added minor truck casting details

2018-12-03
- Added missing intake on right side behind cab

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW M-636
  
" " "
2022-10-14Revision history:

2014-01-07
- Added walkway over central air intake
- Revised speed recorders

2014-10-23
- Truck casting logos

2016-02-22
- Added minor truck casting details

2021-12-30
- Hood roof panels and hinges

2022-10-14
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
MLW RS-18
  
1957-03 -
1957-06
1a CP 8729-8748 CP class DRS-18a
2023-12-17Revision history:

2018-01-28
- Added winterization duct ahead of radiator fan housing

2018-12-14
- Revised fuel tank height
- Revised piping and air fittings behind fuel tank (right-side view)
- Corrected cab door handle orientation
- Revised battery box covers
- Added missing rear sand hatch (right-side view)
- Revised short hood door size

2018-12-18
- Added missing pipe at rear of fuel tank

2019-01-03
- Increased frame height by 0.5"

2019-01-09
- Added radiator fan clips

2019-01-12
- Added rooftop vent on conductor's side behind cab

2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes

2022-03-23
- Coupler cut lever and pilot end handrail

2023-12-17
- Corrected number of radiator shutters
MLW RS-18
  
1958-03 -
1958-07
1c CP 8749-8800 CP class DRS-18b
2023-12-17Revision history:

2018-01-28
- Added winterization duct ahead of radiator fan housing

2018-12-14
- Revised fuel tank height
- Revised piping and air fittings behind fuel tank (right-side view)
- Corrected cab door handle orientation
- Revised battery box covers
- Added missing rear sand hatch (right-side view)
- Revised short hood door size

2018-12-17
- Added missing pipe in front underframe (right side)

2018-12-18
- Added missing pipe at rear of fuel tank (left side)

2019-01-03
- Increased frame height by 0.5"

2019-01-09
- Added radiator fan clips

2019-01-12
- Added rooftop vent on conductor's side behind cab

2021-12-30
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5" and moved rearward by 0.25"
- Cab sub-base door and hinge spacing
- Removed extra bolt around radiator intakes

2022-03-23
- Coupler cut lever and pilot end handrail

2023-12-17
- Corrected number of radiator shutters

1:36 Drawings

Model Built Phase Numbers Notes
GE AC4400CW
  
2001 2a CP 8600-8655
GE AC4400CW
  
2002 -
2003
2b CP 9700-9740
GE AC4400CW
  
2003 2c CP 9750-9784
GE AC4400CW
  
2004 2c CP 9800-9840
GE ES44AC
  
2005 1c1 CP 8700-8759 Self-steering trucks
GE ES44AC
  
2006 1f1 CP 8760-8824
GE ES44AC
  
2006 2a CP 8825-8839
GE ES44AC
   
2007 2a CP 8840-8859
GE ES44AC
  
2008 2b CP 8860-8899
GMD FP7A
  
1950-09 -
1950-10
1b1 CP 4028-4037
GMD GP38-2
  
1983-03 -
1983-06
3a CP 3021-3040
GMD GP38-2
  
1985-10 -
1986-07
3b CP 3041-3135
GMD GP9
  
1954 -
1955
1a CP 8483-8500
GMD GP9
  
1955-05 -
1955-08
1b CP 8530-8546
GMD GP9u
  
1975 -
1978 (R)
2 CP 8615, 8619;
re# 8200-8201
GMD GP9u
  
" " CP 8200-8201
(as modified)
GMD GP9u
  
1975 -
1978 (R)
1a CP 8518;
re# 8202
Wrecked after renumbering
GMD GP9u
  
1975 -
1978 (R)
2 CP 8530;
re# 8203
GMD GP9u
  
" " CP 8203
(as modified)
GMD GP9u
  
1975 -
1978 (R)
1a CP 8492;
re# 8204
GMD GP9u
  
" " CP 8204
(as modified)
MLW M-630
  
1969 -
1970
CP 4508-4512;
4513-4516, re# 4558-4561;
4550-4555;
4570-4573;
4574-4575, re# 4562-4563
MLW M-630
  
" " As modified
MLW M-630
  
1970 CP 4556-4557;
4576-4581, re# 4564-4569
MLW M-630
  
" " As modified
MLW M-636
  
1969 CP 4700-4704
MLW M-636
  
" " As modified
MLW M-636
  
1969 -
1970
CP 4705-4727
MLW M-636
  
" " As modified

See also: