Undecorated Drawings - CSXT

Selected scales:

1:18 Drawings

Model	Built	Phase	Numbers	Qty	Notes	Last modified
EMD SD70MAC ← →	1997-07 - 1997-09	1f1	CSXT 700-724	25	re# 4500-4524	2023-01-24Revision history: 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-07-12 - Axle shock strut locations 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot

EMD SD70MAC ← →	1999-08 - 2000-03	1g2	CSXT 725-774	50	re# 4525-4574	2023-01-20Revision history: 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-07-12 - Axle shock strut locations 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot

GE AC4400CW ← →	2002-03 - 2002-09	2b	CSXT 547-599, 5101-5122			2022-11-11Revision history: 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) (right side) 2020-10-20 - Added X-panel under central air intake (left side) - Added sideframe holes below cab sub-base 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-11 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height

GE Dash 8-40C ← →	1989-05 - 1989-12	1b	CSXT 7500-7593			2022-11-18Revision history: 2021-01-05 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts

GE Dash 8-40C ← →	1990-06 - 1990-08	2a	CSXT 7594-7646			2022-11-18Revision history: 2017-06-05 - Changed top of short hood from sloped to flat 2021-01-05 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts

GE Dash 8-40CW ← ← →	1991-04 - 1991-11	1b, 1c	CSXT 7650-7739, 7740-7758			2022-11-18Revision history: 2014-12-21 - Coupler pockets - Uncoupling levers - Minor truck details - Axle shock struts 2015-01-05 - Radiator roof grill dimensions - Dynamic brake roof panels 2015-07-03 - Anticlimber MU cutout (left side) 2015-07-08 - Corrected air reservoir length (right side) 2015-07-21 - Revised vertical bars in dynamic brake intakes (right side) 2015-08-07 - Revised front corner handrails (higher attachment on short hood) - Removed right rear hood grabiron 2015-08-27 - Corrected handrail stanchion spacing (Phase 1c left side) 2017-01-25 - Revised cab side window size and location (slightly taller; moved slightly upward) 2017-02-13 - Removed clamps from middle handrail stanchions (above fuel tank) - Added seam to right rear of fuel tank - Removed erroneous line on right rear top step 2021-01-05 - Increased corner handrail thickness - Revised end handrail stanchions - Revised corner handrail location and attachments 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab door window height

GE Dash 8-40CW ← →	1992-06 - 1992-08	1c	CSXT 7759-7817			2022-11-18Revision history: 2014-12-21 - Coupler pockets - Uncoupling levers - Minor truck details - Axle shock struts 2015-01-05 - Radiator roof grill dimensions - Dynamic brake roof panels 2015-07-03 - Anticlimber MU cutout (left side) 2015-07-08 - Corrected air reservoir length (right side) 2015-07-21 - Revised vertical bars in dynamic brake intakes (right side) 2015-08-07 - Revised front corner handrails (higher attachment on short hood) - Removed right rear hood grabiron 2015-08-27 - Corrected handrail stanchion spacing (left side) 2017-01-25 - Revised cab side window size and location (slightly taller; moved slightly upward) 2017-02-13 - Removed clamps from middle handrail stanchions (above fuel tank) - Added seam to right rear of fuel tank - Removed erroneous line on right rear top step 2018-09-11 - Revised rear numberboards with hinged housing 2021-01-05 - Increased corner handrail thickness - Revised end handrail stanchions - Revised corner handrail location and attachments 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab door window height

GE Dash 8-40CW ← → →	1992-11 - 1993-05	1c, 1d	CSXT 7818-7845, 7846-7917			2022-11-18Revision history: 2014-12-21 - Coupler pockets - Uncoupling levers - Minor truck details - Axle shock struts 2015-01-05 - Radiator roof grill dimensions - Dynamic brake roof panels 2015-07-03 - Anticlimber MU cutout (left side) 2015-07-08 - Corrected air reservoir length (right side) 2015-07-21 - Revised vertical bars in dynamic brake intakes (right side) 2015-08-07 - Revised front corner handrails (higher attachment on short hood) - Removed right rear hood grabiron 2015-08-27 - Corrected handrail stanchion spacing (left side) 2017-01-25 - Revised cab side window size and location (slightly taller; moved slightly upward) 2017-02-13 - Removed clamps from middle handrail stanchions (above fuel tank) - Added seam to right rear of fuel tank - Removed erroneous line on right rear top step 2018-09-11 - Revised rear numberboards with hinged housing 2021-01-05 - Increased corner handrail thickness - Revised end handrail stanchions - Revised corner handrail location and attachments 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab door window height

GE Dash 8-44CW ← →	1993-07	2a	CSXT 9000-9002		Listed by CSX as Dash 9-44CW	2022-11-18Revision history: 2018-09-11 - Revised rear numberboards with hinged housing 2021-01-05 - Increased corner handrail thickness - Revised end handrail stanchions - Revised corner handrail location and attachments 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab door window height

GE Dash 8-44CW ← →	1994-02 - 1994-03	2b	CSXT 9003-9052		"	2022-11-18Revision history: 2018-09-11 - Removed rear numberboards 2021-01-05 - Increased corner handrail thickness - Revised end handrail stanchions - Revised corner handrail location and attachments 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab door window height

GE ES44AC ← →	2007-10 - 2008-05	2b	CSXT 700-839		Self-steering trucks	2022-11-29Revision history: 2020-01-14 - Revised grabirons behind cab (left-side) 2021-01-06 - Increased corner handrail thickness - Revised end handrail stanchions 2022-01-09 - Cab door window height 2022-11-12 - Coupler cut lever and pilot details - Corner handrail and step bolts 2022-11-28 - Added AEI tag above left rear truck - Added chain posts on end handrails - Corrected straight vs. angled end handrail stanchions

GE ES44AC ← →	2008-01 - 2008-09	2c	CSXT 840-949		Self-steering trucks	2022-11-29Revision history: 2020-01-14 - Revised grabirons behind cab (left-side) 2021-01-06 - Increased corner handrail thickness - Revised end handrail stanchions 2022-01-09 - Added numberboard seam - Cab door window height 2022-11-12 - Coupler cut lever and pilot details - Corner handrail and step bolts 2022-11-28 - Added AEI tag above left rear truck - Added chain posts on end handrails - Corrected straight vs. angled end handrail stanchions

GE ES44AC ← →	2011 - 2013	2f1	CSXT 920-997, 3000-3098		Self-steering trucks	2022-11-29

GE ES44AC ← →	2013	2f2	CSXT 3099-3174		Self-steering trucks	2022-11-29

GE ES44AC ← →	2015-07 - 2015-12	2g	CSXT 3175-3199		Self-steering trucks	2022-11-29

GE ES44AC ← →	"	"	CSXT 3200-3249		Hi-Ad trucks	2022-11-29

GE ES44DC ← →	2005-07 - 2005-10	1c	CSXT 5200-5299			2022-11-29Revision history: 2016-02-20 - Added traction pin in center of trucks 2016-03-29 - Revised cab side windows 2016-11-06 - Revised panel under cab on conductor's side 2016-11-17 - Lowered latch on hood door below exhaust stack (right side) 2017-01-25 - Revised cab side window size and location (slightly taller; moved slightly upward) - Added 4 holes behind left front jacking pad 2017-02-08 - Added empty handbrake chain bracket to front right truck 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2017-02-23 - Added hinged panel ahead of left rear jacking pad 2018-03-26 - Revised door width/spacing under central air intake - Added 2 holes below front cab sub-base door 2021-01-06 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-13 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts 2022-11-28 - Added AEI tag above left rear truck - Added chain posts on end handrails - Corrected straight vs. angled end handrail stanchions

GE ES44DC ← →	2006-03 - 2006-06	1e	CSXT 5300-5399			2022-11-29Revision history: 2016-02-20 - Added traction pin in center of trucks 2016-03-29 - Revised cab side windows - Added grabirons to hood side 2016-11-06 - Revised panel under cab on conductor's side 2016-11-17 - Lowered latch on hood door below exhaust stack (right side) 2017-01-25 - Revised cab side window size and location (slightly taller; moved slightly upward) - Added 4 holes behind left front jacking pad 2017-02-08 - Added empty handbrake chain bracket to front right truck 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2018-03-26 - Revised door width/spacing under central air intake - Added 2 holes below front cab sub-base door 2021-01-06 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-13 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts 2022-11-28 - Added AEI tag above left rear truck - Added chain posts on end handrails - Corrected straight vs. angled end handrail stanchions

GE ES44DC ← →	2007-01 - 2007-04	1f	CSXT 5400-5501			2022-11-29Revision history: 2016-02-20 - Added traction pin in center of trucks 2016-03-29 - Revised cab side windows 2016-11-06 - Revised panel under cab on conductor's side 2016-11-17 - Lowered latch on hood door below exhaust stack (right side) 2017-01-23 - Corrected uncoupling lever error above plow 2017-01-25 - Revised cab side window size and location (slightly taller; moved slightly upward) - Added 4 holes behind left front jacking pad 2017-02-08 - Added empty handbrake chain bracket to front right truck 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2018-03-26 - Revised door width/spacing under central air intake - Added 2 holes below front cab sub-base door 2021-01-06 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-13 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts 2022-11-28 - Added AEI tag above left rear truck - Added chain posts on end handrails - Corrected straight vs. angled end handrail stanchions

GE ET44AC ← →	2015-07		CSXT 3250-3374	125		2022-11-29

GE ET44AC ← →	2016 - 2017		CSXT 3375-3474	100		2022-11-29

1:36 Drawings

Model	Built	Phase	Numbers	Notes
GE Dash 8-40C ← →	1989-05 - 1990-08		CSXT 7500-7646

GE ES44AC ← →	2007 - 2008	2b	CSXT 700-839	Self-steering trucks

GE ES44AC ← →	2008	2c	CSXT 840-949	Self-steering trucks

GE ES44DC ← →	2005	1c	CSXT 5200-5299

GE ES44DC ← →	2006	1e	CSXT 5300-5399

GE ES44DC ← →	2007	1f	CSXT 5400-5501

1:55 Drawings

Model	Phase	Numbers	Notes	Accuracy
EMD GP30 RDMT ← →	1c1	CSXT 2200-2249	GP30 rebuild	* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD GP30 RDMT ← →	1c1	CSXT 2250-2286	"	* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD GP30 RDMT ← →	2	"	"	* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD GP30 RDMT ← →	1c1	CSXT 2287-2330	"	* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD GP30 RDMT ← →	2	"	"	* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD GP35 RDMT ← →	1a	CSXT 2200-2249	GP35 rebuild	* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD GP35 RDMT ← →	1b	"	"	* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD GP35 RDMT ← →	1a	CSXT 2250-2286	"	* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD GP35 RDMT ← →	1b	"	"	* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD GP35 RDMT ← →	1a	CSXT 2287-2330	"	* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD GP35 RDMT ← →	1b	"	"	* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD SD60 ← →		CSXT 6700-6709		* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD SD70ACe ← →	1b	CSXT 4831-4850		* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

EMD SD70MAC ← →	2	CSXT 4701-4830		* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

GE AC4400CW ← →	1a	CSXT 2-115		* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

GE AC4400CW ← →	1c	CSXT 116-173		* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

GE AC4400CW ← →	1c	CSXT 202-301		* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

GE AC4400CW ← ← →	1f, 1g	CSXT 301-341, 342-390		* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

GE AC4400CW ← ← →	2a, 2b	CSXT 391-546, 547-599, 5101-5122		* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

GE AC6000CW ← →		CSXT version 1		Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

GE AC6000CW ← →		CSXT version 2		Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

GE Dash 8-40C ← →		CSXT 7500-7646		* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

GE Dash 8-40CW ← →	1	CSXT 7650-7758		* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

GE Dash 8-40CW ← →	1	CSXT 7759-7917		* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

GE Dash 8-44CW ← →	2a	CSXT 9000-9002	Listed by CSX as Dash 9-44CW	* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)

GE ES44DC ← →		CSXT 5200-5399		* Accuracy legend for 1:55 drawings: * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate)