Undecorated Drawings - LV
Selected scales: |
1:18 Drawings
Model | Built | Phase | Numbers | Notes | Last modified |
---|---|---|---|---|---|
ALCO C-420 ← → | 1963-10 | 1b | LV 404-415 | 2024-01-11Revision history:
2023-08-20 - Changed battery boxes from bolted to hinged 2024-01-11 - Hood door handles | |
ALCO PA-1 ← → | 1947-08 - 1948-05 | LV 601-614; ALCO 1776 | 2022-03-13 | ||
ALCO RS-11 ← → | 1960-03 | 2b | LV 400-403 | 2023-12-17Revision history:
2019-08-21 - Decreased height of cab sub-base doors 2020-11-04 - Narrower cab side window 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail 2023-11-28 - Hood corner notch and side door dimensions 2023-12-17 - Corrected number of radiator shutters | |
EMD GP18 ← → | 1960-05 - 1960-06 | 1 | LV 302-305 | 2023-07-10Revision history:
2020-12-05 - Increased handrail thickness - Revised radiator and dynamic brake fans 2022-01-03 - Larger roof lift rings - Added lift rings around dynamic brakes - Added lift rings on short hood - Removed grabiron behind rear fan - Exhaust stacks 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Footboard height increased by 1.25" - Revised coupler carrier / draft gear 2022-11-15 - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-01-14 - Added toilet drain pipe behind front steps (right side) 2023-02-07 - Removed handrail stanchion top clamps 2023-02-16 - Fuel tank height - Fuel filler 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) | |
EMD GP38-2 ← → | 1972-11 | 1b2 | LV 314-325 | 2023-01-09Revision history:
2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised paper air filter housing and dynamic brake taper - Revised roof fan hatch 2019-01-24 - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward 2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) - Front uncoupling lever 2021-01-09 - Fuel tank height and gap from underframe 2022-02-07 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD GP38AC ← → | 1971-12 | 3 | LV 310-313 | 2023-10-25Revision history:
2018-12-01 - Corrected minor line glitch on latches on first engine room door 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised paper air filter housing and dynamic brake taper 2019-01-23 - Fuel tank and air reservoirs moved 1" to 1.5" rearward - Corrected pipe overlapping bell 2020-12-04 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-09 - Fuel tank height and gap from underframe 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-02 - Horn manifold and back cap dimensions 2023-10-25 - Bottom latch on second hood door | |
EMD GP9 ← → | 1959-10 | 3c | LV 300-301 | 2023-07-10Revision history:
2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings - Added lift rings around dynamic brakes - Added lift rings on short hood - Removed grabiron behind rear fan - Exhaust stacks 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Footboard height increased by 1.25" - Revised coupler carrier / draft gear 2022-11-15 - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-07 - Removed handrail stanchion top clamps 2023-02-16 - Fuel tank height - Fuel filler 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) | |
GE U23B ← → | 1974-11 | 2h1 | LV 501-512 | 2022-03-15Revision history:
2020-02-11 - Corrected minor line glitch in front upper air intake (right side) - Removed pipe behind fuel tank (right side) 2020-02-13 - Increased corner step spacing 2020-12-31 - Increased corner handrail thickness 2021-02-05 - Fuel filler 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps - Added missing end transoms on trucks 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets 2022-03-15 - Horn manifold and back cap dimensions |
1:36 Drawings
Model | Built | Phase | Numbers | Notes |
---|---|---|---|---|
EMD GP38-2 ← → | 1972-11 | 1b | LV 314-325 | |
EMD GP38AC ← → | 1971-12 | 3 | LV 310-313 | |
GE U23B ← → | 1974-11 | 2h1 | LV 501-512 |
See also: