Undecorated Drawings - SLSF
Selected scales: |
1:18 Drawings
Model | Built | Phase | Numbers | Notes | Last modified |
---|---|---|---|---|---|
EMD GP15-1 ← → | 1977-08 - 1977-09 | SLSF 100-124 | 2022-03-02Revision history:
2019-07-30 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle hood doors narrowed by 0.75" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Corrected handrail glitch behind cab (left-side view) 2020-12-09 - Revised side handrail stanchions - Increased handrail thickness - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-08 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-03-02 - Horn manifold and back cap dimensions | ||
EMD GP35 ← → | 1965-04 | 2a | SLSF 717-719 | 2022-03-02Revision history:
2020-12-06 - Increased handrail thickness - Revised radiator and dynamic brake fans (48" fans) 2021-01-13 - Fuel tank height and gap from underframe - Fuel tank vent pipe (increased diameter, revised fittings) - Handrail stanchions above fuel tank (left side) 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Dynamic brake housing dimensions and shape 2022-03-02 - Horn manifold and back cap dimensions | |
EMD GP35 ← → | 1965-04 - 1965-12 | 2b | SLSF 720-724, 732 | 2022-03-02Revision history:
2020-12-06 - Increased handrail thickness - Revised radiator and dynamic brake fans (48" fans) 2021-01-13 - Fuel tank height and gap from underframe - Fuel tank vent pipe (increased diameter, revised fittings) - Handrail stanchions above fuel tank (left side) 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Dynamic brake housing dimensions and shape 2022-03-02 - Horn manifold and back cap dimensions | |
EMD GP35 ← → | 1965-12 | 2c | SLSF 725-731 | Type B trucks | 2022-03-02Revision history:
2020-12-06 - Increased handrail thickness - Revised radiator and dynamic brake fans (48" fans) 2020-12-28 - Brake chain bracket (left side) 2021-01-13 - Fuel tank height and gap from underframe - Fuel tank vent pipe (increased diameter, revised fittings) - Handrail stanchions above fuel tank (left side) 2021-02-09 - Added missing end transoms on trucks 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Dynamic brake housing dimensions and shape 2022-03-02 - Horn manifold and back cap dimensions |
EMD GP38-2 ← → | 1972-03 | 1a | SLSF 663-682 | 2023-01-09Revision history:
2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised paper air filter housing and dynamic brake taper - Revised radiator intake grills and roof fan hatch 2019-01-24 - Fuel tank moved 2.5" rearward - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward 2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-07 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD GP38-2 ← → | 1972-11 - 1975-01 | 1b2 | SLSF 400-458, 683-699 | 2023-01-09Revision history:
2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised paper air filter housing and dynamic brake taper - Revised roof fan hatch 2019-01-24 - Fuel tank moved 2.5" rearward - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward 2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-07 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD GP38-2 ← → | 1976-11 - 1976-12 | 1c3 | SLSF 459-478 | 2023-01-09Revision history:
2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised paper air filter housing and dynamic brake taper - Revised roof fan hatch 2019-01-24 - Fuel tank moved 2.5" rearward - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward 2020-12-08 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-07 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD GP38AC ← → | 1971-02 - 1971-03 | 2b | SLSF 633-653 | 2022-03-02Revision history:
2018-12-01 - Corrected minor line glitch on latches on first engine room door 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised paper air filter housing and dynamic brake taper 2019-01-23 - Revised handrail stanchion spacing - Fuel tank and air reservoirs moved 1" to 1.5" rearward - Corrected pipe overlapping bell 2020-12-04 - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Added missing pixel in left side frame above rear of fuel tank 2021-01-09 - Fuel tank height and gap from underframe 2022-01-05 - Corrected line glitch in sand hose ahead of fuel tank (left side) 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-03-02 - Horn manifold and back cap dimensions | |
EMD GP38AC ← → | 1971-04 | 2c | SLSF 654-662 | 2023-10-25Revision history:
2018-12-01 - Corrected minor line glitch on latches on first engine room door 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised paper air filter housing and dynamic brake taper 2019-01-23 - Fuel tank and air reservoirs moved 1" to 1.5" rearward - Corrected pipe overlapping bell 2020-12-04 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-09 - Fuel tank height and gap from underframe 2022-01-05 - Corrected line glitch in sand hose ahead of fuel tank (left side) 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-02 - Horn manifold and back cap dimensions 2023-10-25 - Bottom latch on second hood door | |
EMD GP40-2 ← → | 1979-05 - 1979-06 | 2b2 | SLSF 750-774 | 2023-01-09Revision history:
2014-10-22 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) 2015-03-29 - Inertial air intakes (revised upper/lower ridge detail) - Rear steps (removed top step corner extension) 2015-08-19 - Air reservoir piping 2017-09-27 - Revised position of lift ring and flag holder at rear of long hood - Corrected minor line glitch on latches on first engine room door 2019-01-21 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-24 - Fuel tank moved 2.5" rearward - Front left traction motor cables moved 2.25" rearward - Front right traction motor cables and air piping moved 0.75" to 1" rearward - Revised exhaust stack 2020-11-11 - Removed batten strip from rear of dynamic brake hatch 2020-12-07 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Increased metal sand pipe diameter - Air pipe vent valve (left front / right rear under walkway) 2021-01-09 - Fuel tank height and gap from underframe 2022-02-08 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-03-03 - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD SD38-2 ← → | 1979-06 | 2b2 | SLSF 296-297 | 2023-01-09Revision history:
2016-04-29 - Revised rear section of dynamic brake housing 2017-09-27 - Revised position of lift ring and flag holder at rear of long hood - Corrected minor line glitch on latches on first engine room door 2019-01-23 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised roof fan hatch - Revised paper air filter housing and dynamic brake taper 2020-12-20 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) - Adjusted height of center hinge of engine room doors - Added missing line segment in traction motor cables above fuel filler (left side) 2021-01-09 - Fuel tank height and gap from underframe 2022-03-20 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD SD38-2 ← → | 1979-06 | 2b2 | SLSF 298-299 | 2023-01-09Revision history:
2017-09-27 - Revised position of lift ring and flag holder at rear of long hood - Corrected minor line glitch on latches on first engine room door 2019-01-23 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised roof fan hatch - Revised paper air filter housing 2020-12-20 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) - Adjusted height of center hinge of engine room doors - Added missing line segment in traction motor cables above fuel filler (left side) 2021-01-09 - Fuel tank height and gap from underframe 2022-03-20 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct - Horn manifold and back cap dimensions 2022-11-08 - Corrected line glitch on walkway behind cab 2023-01-09 - Long hood end seams | |
EMD SD40-2 ← → | 1978-07 | 2a4 | SLSF 950-957 | 2023-01-09Revision history:
2014-02-17 - Truck shape and casting logos 2014-10-22 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) 2014-11-07 - Inertial air intakes (added ridge on top) 2016-02-19 - Removed dynamic brake hatch batten strip 2016-04-14 - Revised steps - redrawn steps with deeper angled sheet 2017-09-26 - Revised position of lift ring and flag holder at rear of long hood - Corrected minor line glitch on latches on first engine room door 2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised exhaust stack 2020-12-17 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) - Adjusted height of center hinge of engine room doors - Added missing line segment in traction motor cables above fuel filler (left side) 2021-01-09 - Fuel tank height and gap from underframe 2022-03-19 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD SD45 ← → | 1967-02 - 1967-05 | 1b2 | SLSF 900-913 | 2022-03-21Revision history:
2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
EMD SD45 ← → | 1968-02 | 2a3 | SLSF 914-925 | 2022-03-29Revision history:
2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
EMD SD45 ← → | 1968-10 - 1969-10 | 2b1 | SLSF 926-942 | 2022-12-05Revision history:
2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
EMD SD45 ← → | 1969-12 | 2b1 | SLSF 943-948 | 2022-12-05Revision history:
2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
GE B30-7 ← → | 1977-12 | 1a | SLSF 863-870 | 2022-08-02Revision history:
2018-01-15 - Minor correction to sand line above right rear truck - Removed speed recorder from #3 axle 2018-11-21 - Revised air reservoir height and brackets - Changed air reservoir brackets to early style with vertical C-channel supports - Relocated rear traction motor cables closer to fuel tank - Added end-mounted fuel gauge on fuel tank 2020-02-11 - Revised air filter behind fuel tank (right side view) 2020-11-18 - Revised horn 2021-01-05 - Increased corner handrail thickness 2021-02-11 - Pipe behind rear truck - Added missing end transoms on trucks - Fuel filler - Added safety valve to front air reservoir (left side) - Small pipe clips above fuel tank (right side) - Longer handrail stanchion in front of cab (right side) 2022-08-02 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Horn manifold and back cap dimensions | |
GE U30B ← → | 1968-10 - 1968-11 | 2b1 | SLSF 832-835 | 2022-03-15Revision history:
2021-02-05 - Fuel filler - Added radiator drip rail 2021-02-07 - Added inner sand lines 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps - Added missing end transoms on trucks 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2021-02-25 - Air intake screen 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Revised dynamic brake grids 2022-03-15 - Horn manifold and back cap dimensions | |
GE U30B ← → | 1969-09 | 2b3 | SLSF 836-843 | 2022-03-15Revision history:
2021-02-05 - Fuel filler - Added radiator drip rail 2021-02-07 - Added inner sand lines 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps - Added missing end transoms on trucks 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2021-02-25 - Air intake screen 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets - Revised dynamic brake grids 2022-03-15 - Horn manifold and back cap dimensions | |
GE U30B ← → | 1973-05 | 2g1 | SLSF 844-853 | 2022-03-15Revision history:
2018-12-20 - Added water level sight glass on right rear of hood 2020-02-11 - Corrected minor line glitch in front upper air intake (right side) - Revised air filter behind fuel tank (right side) 2020-12-31 - Increased corner handrail thickness 2021-02-05 - Fuel filler 2021-02-07 - Added inner sand lines 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps - Added missing end transoms on trucks 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets 2022-03-15 - Horn manifold and back cap dimensions | |
GE U30B ← → | 1974-08 - 1974-09 | 2g2 | SLSF 854-857 | 2022-03-15Revision history:
2020-02-13 - Increased corner step spacing (left side) 2020-12-31 - Increased corner handrail thickness 2021-02-05 - Fuel filler 2021-02-07 - Added inner sand lines 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps - Added missing end transoms on trucks 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets 2022-03-15 - Horn manifold and back cap dimensions | |
GE U30B ← → | 1975-03 | 2h3 | SLSF 858-862 | 2022-03-15Revision history:
2020-02-11 - Corrected minor line glitch in front upper air intake (right side) 2020-02-13 - Increased corner step spacing 2020-12-31 - Increased corner handrail thickness 2021-02-05 - Fuel filler 2021-02-07 - Added inner sand lines 2021-02-09 - Air filter bracket and piping behind fuel tank (right side) - Added sloped plate under frame behind draft gear - Added missing section of angled pilot brace behind steps - Added missing end transoms on trucks 2021-02-13 - Longer handrail stanchion in front of cab (right side) 2022-02-08 - Coupler cut lever and pilot details - Corner handrail and step bolts - Cab window gaskets 2022-03-15 - Horn manifold and back cap dimensions |
See also: