Undecorated Drawings - EMD SD60
Selected scales: |
1:18 Drawings
Model | Built | Phase | Numbers | Notes | Last modified |
---|---|---|---|---|---|
EMD SD60 ← → | 1986-08 - 1986-10 | CNW 8001-8055 | 2023-01-19Revision history:
2017-07-01 - Removed angled braces under front walkway extension - Corrected latches on first and last tall hood doors 2017-12-31 - Revised angled sheet behind bottom step - Revised piping behind fuel tank 2020-01-05 - Revised center hood door spacing - Increased height of walkway blower duct and bottom of hood doors - Revised hood behind cab (right-side view) 2020-11-28 - Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2020-12-26 - Corrected location of handrail attachment point to rear of cab (left side) 2021-01-10 - Fuel tank height and gap from underframe 2022-12-12 - Coupler cut levers - Corner handrail end plate / stairwell attachment points 2023-01-19 - Hood door and radiator intake height | ||
EMD SD60 ← → | 1989-06 - 1989-07 | CR 6843-6857 | 2023-01-19Revision history:
2017-07-01 - Corrected latches on first and last tall hood doors 2017-12-31 - Revised piping behind fuel tank 2020-01-05 - Revised center hood door spacing - Increased height of walkway blower duct and bottom of hood doors - Revised hood behind cab (right-side view) 2020-11-28 - Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2020-12-26 - Corrected location of handrail attachment point to rear of cab (left side) 2021-01-10 - Fuel tank height and gap from underframe 2021-01-27 - Corrected line glitch in speed recorder cable at axle 2022-12-12 - Coupler cut levers - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions 2023-01-19 - Hood door and radiator intake height | ||
EMD SD60 ← → | 1986-10 - 1986-12 | EMDX 9000-9099 | Oakway Leasing | 2023-01-19Revision history:
2017-07-01 - Corrected latches on first and last tall hood doors 2017-12-31 - Revised angled sheet behind bottom step - Revised piping behind fuel tank 2020-01-05 - Revised center hood door spacing - Increased height of walkway blower duct and bottom of hood doors - Revised hood behind cab (right-side view) 2020-11-28 - Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2020-12-26 - Corrected location of handrail attachment point to rear of cab (left side) 2021-01-10 - Fuel tank height and gap from underframe 2021-01-22 - Relocated horn 2022-12-12 - Coupler cut levers - Corner handrail end plate / stairwell attachment points 2023-01-19 - Hood door and radiator intake height | |
EMD SD60 ← → | 1986-02 - 1986-05 | UP 6000-6059 | 2023-01-19Revision history:
2020-01-05 - Revised center hood door spacing - Increased height of walkway blower duct and bottom of hood doors - Revised hood behind cab (right-side view) 2020-11-28 - Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2020-12-26 - Corrected location of handrail attachment point to rear of cab (left side) 2021-01-10 - Fuel tank length, height and gap from underframe 2022-12-12 - Coupler cut levers - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions 2023-01-19 - Hood door and radiator intake height | ||
EMD SD60 ← → | 1988-02 - 1988-06 | UP 6060-6084 | 2023-01-19Revision history:
2020-01-05 - Revised center hood door spacing - Increased height of walkway blower duct and bottom of hood doors - Revised hood behind cab (right-side view) 2020-11-28 - Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5" 2020-12-03 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing 2020-12-05 - Increased fuel tank vent pipe diameter - Sand lines (larger pipe diameter, revised hoses) 2020-12-26 - Corrected location of handrail attachment point to rear of cab (left side) 2021-01-10 - Fuel tank length, height and gap from underframe 2022-12-12 - Coupler cut levers - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions 2023-01-19 - Hood door and radiator intake height |
1:55 Drawings
Model | Phase | Numbers | Notes | Accuracy |
---|---|---|---|---|
EMD SD60 ← → | CNW 8001-8055 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD60 ← → | CR 6843-6867 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD60 ← → | CSXT 6700-6709 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD60 ← → | EMDX 1-4 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD60 ← → | EMDX 9000-9099 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD60 ← → | KCS 714-723 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD60 ← → | KCS 724-759 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD60 ← → | NS 6676-6700 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD60 ← → | SOO 6000-6041 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD60 ← → | SOO 6042-6057 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD60 ← → | UP 6000-6084 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
See also: