What's New?
See Latest Updates
Past Updates
Past Updates - 2025
2025-12-31
- Added in Drawings/1:18 Painted section:
- LLPX #2235 (EMD GP38-2)
2025-12-30
- Added in Drawings/1:18 Undecorated section:
- 12 rebuilt EMD GP38-2 drawings (LLPX 2259-2276 versions)
2025-12-28
- Added in Lettering and Logos section:
- DRGW lettering
2025-12-27
- Added in Lettering and Logos section:
- GATX logos
- LLPX logo and lettering
2025-12-26
- Added in Drawings/1:18 Undecorated section:
- 4 rebuilt EMD GP38-2 drawings (LLPX 2234-2257 versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD / GMD F40PH and F40PH-2 drawings (versions with K5LA horn)
- Corrected horn bell layering (right side)
- EMD and GMD GP38-2 drawings
- Updated phase numbers (Phase 1b3 through 1d2 versions)
- Added segment of pipe below air reservoir behind fuel tank (except versions with 3600-gallon tank)
- Added sloped handbrake chain housing (Phase 1b2 and earlier left-side views)
- Gyralite shades (Family Lines versions)
- Type F couplers (BN, CP, GMO, KCS and SOU versions)
- Stairwell side sheet (DTI and SOU versions)
- EMD GP38, GP38AC, GP38-2, GP40, GP40-2 and SD38 drawings (DTI versions)
- Revised gong bell
- EMD GP38-2 drawings (LIRR versions)
- Added segment of pipe below air reservoir behind fuel tank
- Fuel gauge
- Stairwell side sheet (Phase 1c1 version)
- Corrected minor error in front handrail (Phase 1c1 left-side view)
- Added missing section of rear MU connector (Phase 1c1 right-side view)
- EMD GP40 drawings
- Gyralite shades (IC, LN and SSW versions)
- Type F couplers (IC and LLPX versions)
- Added retention tank behind fuel tank (LLPX version)
- EMD GP40-2 drawings
- Updated phase numbers (Phase 1a3 and 1b versions)
- Added segment of pipe below air reservoir behind fuel tank (except versions with 3600-gallon tank)
- Added sloped handbrake chain housing (Phase 1a2 and earlier left-side views)
- Gyralite shades (Family Lines versions)
- Type F couplers (KCS version)
- Corrected horn bell layering (right side, versions with K5LA)
- EMD SD38-2 and SD39 drawings (LN and SP versions)
- Gyralite shades
- EMD / GMD F40PH and F40PH-2 drawings (versions with K5LA horn)
- Revised in Drawings/1:18 Painted section:
- DTI #224 (EMD GP38-2)
- DTI #6419 (EMD GP40-2)
- GTW #5836 (EMD GP38-2)
- RI #4613 (EMD GP38-2)
- SOO #4452 (EMD GP38-2)
- Added segment of pipe below air reservoir behind fuel tank
- Stairwell side sheet (DTI #224)
- Revised gong bell (DTI #224 and #6419)
- BO #1977 (EMD GP40-2)
- Added sloped handbrake chain housing
- BO #4331 (EMD GP40-2)
- Corrected horn bell layering
- SLR #3008 (EMD GP40-2)
- Added retention tank behind fuel tank
- Revised in Locomotive Descriptions and Phases section:
- EMD / GMD GP38-2 phases
- Added Phases 1b3 and 1c1
- Relabeled previous Phase 1c2 and 1c3 as Phase 1d1 and 1d2
- Added production dates
- EMD / GMD GP38-2 phases
2025-12-23
- Added in Lettering and Logos section:
- EMDX logo and lettering
2025-12-22
- Added in Lettering and Logos section:
- IC white on black numbers (2 versions)
2025-12-21
- Added in Lettering and Logos section:
- IC diamond and "split rail" logos
- IC white on black lettering (2 versions)
- LLPX numbers
- Added in Lettering and Logos section:
- GATX (LLPX) yellow, gray, blue
2025-12-20
- Added in Lettering and Logos section:
- IC / ICG lettering and numbering (replacing earlier version of numbers)
2025-12-19
- Added in Lettering and Logos section:
- UP "Dependable Transportation" lettering
2025-12-18
- Added in Lettering and Logos section:
- UP "We can handle it" lettering
- Additional UP lettering and number variations
2025-12-17
- Added in Drawings/1:18 Undecorated section:
- 3 MLW M-636 drawings (CN versions)
- Revised in Drawings/1:18 Undecorated section:
- All ALCO 4-axle Century series drawings (except SPS 310-317)
- Pilot support brackets
- All MLW C-424 drawings
- Pilots and support brackets (as-built versions)
- Pilots (as-modified versions)
- All ALCO 4-axle Century series drawings (except SPS 310-317)
2025-12-16
- Revised in Drawings/1:18 Undecorated section:
- All MLW M-630 and M-636 drawings
- Redrawn pilots and end air piping
- Removed CP draft gear / pilot modifications from as-built versions
- Traction motor cables
- Added truck frame hangers near fuel tank
- Centered fuel tank in underframe
- Added missing rear sand hatch
- Type F couplers
- All MLW M-630 and M-636 drawings
2025-12-13
- Added in Drawings/1:18 Undecorated section:
- 2 EMD DD35 drawings (UP as-modified version)
- 2 EMD DDA35 drawings (As-modified version)
2025-12-11
- Added in Photos section:
- 8 photos from 2025-08-15 (SLR)
- 6 photos from 2025-09-10 (CP)
- 13 photos from 2025-09-11 (SLR)
- 16 photos from 2025-09-27 (CBNS)
- 12 photos from 2025-09-28 (CBNS)
- 10 photos from 2025-09-29 (CBNS)
2025-12-11
- Added in Drawings/1:18 Undecorated section:
- 2 EMD DD35 drawings (UP as-modified version)
- 2 EMD DDA35 drawings (As-modified version)
2025-12-10
- Added in Drawings/1:18 Undecorated section:
- 6 EMD DD35 drawings
- 2 EMD DDA35 drawings
- Revised in Locomotive Descriptions and Phases section:
- GP28, GP35 series phases
- Added information about DD35 and DDA35
- GP28, GP35 series phases
2025-12-02
- Added Drawings/1:220 section
- Updated Drawing History page (additional details about 1:220 drawings)
- Revised in Locomotive Descriptions and Phases section:
- F40PH series phases
- Added description of RTA / Metra units
- Added illustrations
- F40PH series phases
2025-12-01
- Continued transfer of 1:55 drawings from old pages to drawing search:
- Trinity covered hoppers
- Painted Rolling stock (Reporting marks S - W)
2025-11-30
- Continued transfer of 1:55 drawings from old pages to drawing search:
- Undecorated Berwick and PCF boxcars
- Painted Rolling stock (Reporting marks A - S)
- Painted SNCF locomotives and trainsets
2025-11-29
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD50
- EMD locomotive top / end views
- Pullman-Standard boxcars
2025-11-28
- Revised phases and labels for 1:36 EMD SD40-2 and SD40T-2 drawings
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD40-2B
- EMD SD40T-2
2025-11-27
- Added in Drawings/1:18 Painted section:
- METX #182 (EMD F40PH-3)
- Revised in Drawings/1:18 Undecorated section:
- GE P40DC and P42DC drawings
- Type F couplers
- GE P40DC and P42DC drawings
- Revised in Drawings/1:18 Painted section:
- AMTK #802 (GE P40DC)
- Type F couplers
- AMTK #802 (GE P40DC)
2025-11-26
- Added in Drawings/1:18 Painted section:
- METX #199 (EMD F40PHM-2)
2025-11-24
- Added in Drawings/1:18 Undecorated section:
- 2 EMD F40PH-3 drawings
- 2 EMD F40PHM-3 drawings
2025-11-21
- Added in Lettering and Logos section:
- Metra logo (2 later versions)
2025-11-20
- Added in Drawings/1:18 Undecorated section:
- 2 EMD F40PHM-2 drawings
- Added in Lettering and Logos section:
- Metra logo (early version)
- Added in Locomotive Descriptions and Phases section:
- F40PH series phases (EMD and GMD)
2025-11-18
- Added in Drawings/1:18 Undecorated section:
- 2 EMD F40PH-2 drawings (METX version)
- Revised in Drawings/1:18 Undecorated section:
- All EMD / GMD F40PH, F59PH and F59PHI series drawings
- Type F / H couplers
- EMD F40PH-2 drawings (CDTX versions)
- Truck casting lettering
- Gyralite shades
- Added battery box cables (left side)
- All EMD / GMD F40PH, F59PH and F59PHI series drawings
- Revised in Drawings/1:18 Painted section:
- AMT #526 (EMD F59PH)
- AMT #1325 (EMD F59PHI)
- GOT #522 (EMD F59PH)
- VIA #6407 (GMD F40PH-2D)
- VIA #6438 (GMD F40PH-2D)
- Type F / H couplers
2025-11-16
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD45 drawings (ATSF versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40 and SD45 drawings (Phase 1a1 through 1b1 right-side views)
- Corrected minor error on rear truck bolster
- Corrected line glitch on bottom rear hood seam (SD45 only)
- EMD SD40 and SD45 drawings (Phase 1a1 through 1b1 right-side views)
- Revised in Drawings/1:18 Undecorated section:
- NW #1719 (EMD SD45)
- Corrected minor error on rear truck bolster
- NW #1719 (EMD SD45)
2025-11-15
- Added in Drawings/1:18 Undecorated section:
- 14 EMD SD40 drawings (CNW and MP versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP15-1, GP50, SD38-2, SD40-2 and SD45 drawings (CNW versions)
- Revised gong bell
- EMD GP38 drawings (MP version)
- Removed drop step and end handrail chains
- Relocated cab roof antenna
- EMD GP15-1, GP50, SD38-2, SD40-2 and SD45 drawings (CNW versions)
2025-11-14
- Added in Drawings/1:18 Undecorated section:
- 6 EMD SD40 drawings (CRR versions)
2025-11-11
- Added in Drawings/1:18 Undecorated section:
- 10 GMD SD40u drawings
2025-11-10
- Revised in Drawings/1:18 Undecorated section:
- GMD SD40 drawings
- Slant added to stairwell side sheet
- Added vent valve under walkway behind cab (right side)
- Corrected minor glitch in rear-most hood lift rings (AC and CN versions)
- Cab sub-base door height (right side) (CN versions)
- GMD GP40-2(W) and GP40-2L(W) drawings
- Exhaust stack (right side)
- GMD SD40 drawings
- Revised in Drawings/1:18 Painted section:
- CN #9511 (GMD GP40-2L(W))
- Exhaust stack
- CN #9511 (GMD GP40-2L(W))
2025-11-09
- Added in Drawings/1:18 Undecorated section:
- 4 Thrall 71' Centerbeam flatcar drawings (BCIT 871000-871149, 871200-871259, 871300-871424)
2025-11-07
- Added in Drawings/1:18 Undecorated section:
- 2 Thrall 60' 8" Centerbeam flatcar drawings (BN 624400-624699)
- 2 Thrall 71' Centerbeam flatcar drawings (BCIT 871500-871624)
- Revised in Drawings/1:18 Undecorated section:
- All Thrall 60' 8" Centerbeam flatcar drawings
- Minor revisions to brake system layering
- All Thrall 60' 8" Centerbeam flatcar drawings
2025-10-29
- Revised Website building section
- Added brief mention of AI
2025-10-23
- Revised in Locomotive Descriptions and Phases section:
- EMD GP40X phases
- Added truck illustrations and sample photos
- EMD GP40X phases
2025-08-26
- Added in Photos section:
- 178 Peter Cox photos (George Matheson collection)
- 1 photo from 1950
- 1 photo from 1951
- 3 photos from 1952
- 7 photos from 1953
- 10 photos from 1954
- 7 photos from 1955
- 11 photos from 1956
- 76 photos from 1957
- 16 photos from 1958
- 22 photos from 1959
- 4 photos from 1960
- 19 photos from 1961
- 1 photo from 1962
- 178 Peter Cox photos (George Matheson collection)
2025-08-14
- Added in Photos section:
- 14 photos from 2022-05-29 (CP)
- 51 photos from 2025-08-11 (SLR)
2025-08-13
- Added in Photos section:
- 56 photos from 2025-06-19 (CN)
- 101 photos from 2025-06-20 (CN)
2025-08-12
- Added in Photos section:
- 130 photos from 2025-06-17 (CN)
2025-07-01
- Added in Photos section:
- 50 photos from 2025-06-16 (CN)
- 86 photos from 2025-06-16 (CP)
2025-06-28
- Revised in Photos section:
- Cropped and increased brightness for photos from the following dates:
- 2010-03-05, 16, 31
- 2010-04-02, 22
- 2010-06-07, 27
- 2010-07-02, 06, 19, 29
- 2010-09-29
- 2010-10-20
- 2010-11-18, 25
- 2011-05-11
- 2011-07-18
- 2011-09-19
- Cropped and increased brightness for photos from the following dates:
2025-05-30
- Added in Drawings/1:18 Undecorated section:
- 2 Portec 4750 cu-ft hopper car drawings
2025-05-23
- Added in Drawings/1:18 Undecorated section:
- 4 Thrall 60' 8" Centerbeam flatcar drawings (1986 TTZX and 1988 UP versions)
2025-05-17
- Added in Drawings/1:18 Undecorated section:
- 2 Railwest Manufacturing Centerbeam flatcar drawings
- Revised in Drawings/1:18 Undecorated section:
- GE ET44AC drawings (UP right-side views)
- Corrected minor glitch in cab roof antennas
- Thrall Centerbeam flatcar drawings
- Air hose support cable to coupler
- Minor brake system revisions (left side)
- GE ET44AC drawings (UP right-side views)
2025-05-12
- Added in Drawings/1:18 Undecorated section:
- 2 Gunderson Centerbeam flatcar drawings (1996-1997 version)
2025-05-10
- Added in Drawings/1:18 Undecorated section:
- 2 Trentonworks Centerbeam flatcar drawings (1997-1998 version)
2025-05-09
- Added in Drawings/1:18 Undecorated section:
- 6 Trentonworks Centerbeam flatcar drawings (1994 BCOL versions; 2006 DWC version)
2025-05-06
- Added in Drawings/1:18 Undecorated section:
- 2 NSC Centerbeam flatcar drawings (1997-2002 version)
- 2 Trentonworks Centerbeam flatcar drawings (2006 version)
- Revised in Drawings/1:18 Undecorated section:
- ARI / Trentonworks Centerbeam flatcar drawings
- Air hose and support bracket
- ARI / Trentonworks Centerbeam flatcar drawings
2025-04-21
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP60 drawings (EMDX version)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP20D, GP20C-ECO, GP50 and GP60 series drawings (versions with Timken roller bearings)
- Corrected minor glitch in wheel bearings
- EMD GP59 drawings (EMDX versions)
- Cab windshield and numberboard height
- Air reservoir piping
- EMD GP20D, GP20C-ECO, GP50 and GP60 series drawings (versions with Timken roller bearings)
- Revised in Locomotive Descriptions and Phases section:
- EMD GP59, GP60 phases
- Converted to tabular format
- EMD GP59, GP60 phases
2025-04-20
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD60 drawings (NS versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP59 drawings (NS version)
- Cab antenna locations
- Piping behind fuel tank
- EMD GP59 drawings (NS version)
2025-04-18
- Added in Photos section:
- 101 Bruce Chapman photos (George Matheson collection)
- 39 photos from 1997-12
- 48 photos from 1997-11
- 14 photos from 1997-10
- 101 Bruce Chapman photos (George Matheson collection)
2025-04-16
- Added in Photos section:
- 68 Bruce Chapman photos (George Matheson collection)
- 24 photos from 1997-09
- 19 photos from 1997-08
- 25 photos from 1997-07
- 39 photos (George Matheson collection, photographer unknown)
- 1 photo from 2005
- 1 photo from 1997
- 18 photos from 1995
- 4 photos from 1994
- 1 photo from 1992
- 14 photos from unknown date
- 68 Bruce Chapman photos (George Matheson collection)
2025-04-13
- Added in Photos section:
- 49 Bruce Chapman photos (George Matheson collection)
- 49 photos from 1997-06
- 49 Bruce Chapman photos (George Matheson collection)
2025-04-12
- Added in Photos section:
- 7 photos from 2025-04-06
- 18 photos from 2025-04-10
- 31 Bruce Chapman photos (George Matheson collection)
- 8 photos from 1997-04
- 23 photos from 1997-05
2025-04-07
- Added in Drawings/1:18 Undecorated section:
- 2 GMD SD40 drawings (AC version)
2025-04-07
- Added in Drawings/1:18 Undecorated section:
- 2 GMD SD40-2 drawings (AC version)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP9 drawings (most Phase 3c right-side views with high short hood)
- EMD GP18 and GP20 drawings (most right-side views with high short hood)
- Corrected layering error with short hood sand hatch and grabiron
- EMD GP7 and GP9 drawings (WP versions)
- Changed short hood sand hatch to correct version
- Added in Lettering and Logos section:
- AC logo
2025-03-17
- Added in Drawings/1:18 Undecorated section:
- 6 EMD SD40-2 drawings (SOO Phase 3c1 and Phase 4 versions)
2025-03-14
- Added in Drawings/1:18 Painted section:
- BCOL #762 (GMD SD40-2)
- BCOL #4651 (GE Dash 9-44CW)
2025-03-13
- Revised in Locomotive Descriptions and Phases section:
- EMD SD38-2, SD40-2 phases
- Updated illustrations
- EMD SD38-2, SD40-2 phases
2025-03-12
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD38-2, SD45-2 and SD45T-2 drawings
- Updated phase number (SLSF SD38-2 only)
- Added traction motor cable conduits above middle axles (where cables present)
- Traction motor cable routing and cleats
- Sand hose routing near steps (SD38-2 only)
- Added missing section of front right air pipe (SD38-2 only)
- Corrected minor line glitch in front left / rear right MU hoses (versions with flat pilot only)
- Added angled handbrake chain housing on short hood (Phase 1a2 and earlier left-side views)
- All EMD SD50, SD60, SD60I and SD60M drawings
- Added traction motor cable conduits above middle axles (where cables present)
- Traction motor cable routing and cleats
- All EMD SD38-2, SD45-2 and SD45T-2 drawings
- Revised in Drawings/1:18 Painted section:
- BN #8004 (EMD SD40-2)
- BNSF #8010 (EMD SD40-2)
- CBNS #3366 (EMD SD40-2)
- CN #5250 (GMD SD40-2(W))
- CR #6381 (EMD SD40-2)
- LN #8158 (EMD SD40-2)
- MKT #621 (EMD SD40-2)
- SP #9168 (EMD SD45T-2)
- Added traction motor cable conduits above middle axles (where cables present)
- Traction motor cable routing and cleats
- Sand hose routing near steps (except SP #9168)
- Added missing section of front right air pipe (BN #8004, CBNS #3366, CN #5250, MKT #621)
- Corrected minor line glitch in rear right MU hoses (BN #8004, CBNS #3366, MKT #621)
- Added angled handbrake chain housing on short hood (SP #9168)
- Relocated dynamic brake lift rings (CBNS #3366, LN #8158, MKT #621)
- Added #2 traction motor cables to left side (LN #8158)
- Removed #2 traction motor cables from right side (CBNS #3366, MKT #621)
- Corrected minor glitch in wheel bearings (CBNS #3366, LN #8158)
2025-03-11
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD40-2 drawings (NdeM Phase 1b2 version)
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD40-2 drawings
- Updated phase number (Phase 1a3; 1d; 2a1 and later units)
- Added traction motor cable conduits above middle axles (where cables present)
- Traction motor cable routing and cleats
- Sand hose routing near steps
- Added missing section of front right air pipe
- Corrected minor line glitch in front left / rear right MU hoses (versions with flat pilot only)
- Added angled handbrake chain housing on short hood (Phase 1a2 and earlier left-side views)
- Relocated dynamic brake lift rings (Phase 3a and later versions)
- Relocated #2 traction motor cables from right to left side (Phase 3c1 and later versions)
- Corrected minor line glitch in short hood door latches (ATSF 5020-5027 and 5109-5124 only)
- Corrected minor glitch in wheel bearings (CRR and LN Phase 3d1 versions only)
- GMD SD50F and SD60F drawings
- Added traction motor cable conduits above middle axles (left side)
- Traction motor cable routing and cleats
- Revised in Drawings/1:18 Painted section:
- CN #5512 (GMD SD60F)
- DMVW #5454 (GMD SD50F)
- Traction motor cable cleats
- All EMD SD40-2 drawings
2025-03-10
- Revised in Locomotive Descriptions and Phases section:
- EMD SD38-2, SD40-2 phases
- Revamped phase descriptions to match those created by Brian Bennett (resulting in 8 new subphases and all new phase numbers for Phase 2a2 and up)
- Added production dates
- Added comparison timeline of phases
- EMD SD38-2, SD40-2 phases
2025-03-09
- Revised in Drawings/1:18 Undecorated section:
- All GMD SD40-2(W) drawings
- Added traction motor cable conduits above middle axles (where cables present)
- Traction motor cable routing and cleats
- Sand hose routing behind steps
- Added missing section of front right air pipe
- GMD SD40-2F drawings
- Added traction motor cable conduits above middle axles (left side)
- Traction motor cable routing and cleats
- All GMD SD40-2(W) drawings
- Revised in Drawings/1:18 Painted section:
- CMQ #9017 (GMD SD40-2F)
- CMQ #9020 (GMD SD40-2F)
- CP #9009 (GMD SD40-2F)
- Added traction motor cable conduits above middle axles (except CMQ 9020)
- Traction motor cable routing and cleats
2025-03-08
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD40-2 drawings (NdeM Phase 4 version)
2025-03-07
- Added in Drawings/1:18 Undecorated section:
- 6 GMD SD40-2 drawings (BCOL and CP Phase 3c-3d versions)
- Revised in Drawings/1:18 Undecorated section:
- GMD SD40-2 drawings
- Added traction motor cable conduits above middle axles (where cables present)
- Front left traction motor cable routing
- Added missing section of front right air pipe and traction motor cable clamp
- Added missing section of MU piping behind rear steps
- Sand hose routing (versions with 102" short hood)
- GMD SD40-2 drawings (CP Phase 3a and 3b versions)
- Speed recorder cable
- Left rear handrail stanchion spacing (Phase 3b version)
- Added ditch lights
- Added missing front right fuel level indicator (Phase 3b version)
- Added missing front left traction motor cables (Phase 3a version)
- Removed redundant front right traction motor cables
- GMD SD40-2 drawings
2025-03-06
- Added in Drawings/1:18 Undecorated section:
- 4 GMD SD40-2 drawings (BCOL 751-762 and CP 5806-5835)
- Revised in Drawings/1:18 Undecorated section:
- GMD SD40-2 drawings (CP Phase 3a and 3b versions)
- Added snow plow connector above MU connector
- Stairwell side sheets
- GMD SD40-2 drawings (CP Phase 3a and 3b versions)
2025-03-05
- Added in Drawings/1:18 Undecorated section:
- 2 GE Dash 9-44CW drawings (BCOL version)
- 2 GE Dash 9-44CWL drawings (BCOL version)
- Revised in Drawings/1:18 Undecorated section:
- GE AC4400CW, Dash 9-44CW and Dash 9-44CWL right-side views (BNSF, CSXT and CN versions)
- Added missing hinges on rear hood end door
- GE Dash 9-44CW drawings (early CN versions)
- Corrected stanchion height near rear jacking pad (right side)
- GE Dash 9-44CWL drawings (CN version)
- Added missing hose at fuel filler (left side)
- Corrected line glitch in ground light under cab (left side)
- Revised air piping ahead of fuel tank (right side)
- Corrected stanchion height near rear jacking pad (right side)
- GE AC4400CW, Dash 9-44CW and Dash 9-44CWL right-side views (BNSF, CSXT and CN versions)
- Revised in Drawings/1:18 Painted section:
- CN #2501 (GE Dash 9-44CWL)
- Added missing hose at fuel filler
- Corrected line glitch in ground light under cab
- CN #2501 (GE Dash 9-44CWL)
- Added in Lettering and Logos section:
- BCOL lettering (3 images and font match)
2025-03-03
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RS-32 drawings (SP version)
- Revised in Drawings/1:18 Undecorated section:
- ALCO RS-11 and RS-36 drawings (Phase 2a2 and later right-side views)
- Added missing bottom hinge on second engine room door
- Relocated short hood grabirons (SP 5866-5871 only)
- ALCO RS-36 drawings
- Added pipe near steps under radiator shutters
- Revised underframe sand lines
- Relocated front hood louvers
- Revised hood near cab door latch / wiper
- ALCO RS-11 and RS-36 drawings (Phase 2a2 and later right-side views)
2025-02-22
- Added in Drawings/1:18 Undecorated section:
- 4 EMD F40PH-2 drawings (CDTX versions)
2025-02-21
- Added in Drawings/1:18 Undecorated section:
- 10 EMD F40PH drawings (AMTK as-modified versions)
2025-02-19
- Added in Drawings/1:18 Undecorated section:
- 4 EMD F40PH drawings (AMTK Phase 3b and 3c versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 drawings (RI version)
- Added missing cab arm rest
- EMD SD40-2 drawings (RI version)
2025-02-16
- Added in Drawings/1:18 Undecorated section:
- 2 GMD F40PH drawings (GOT version)
- Revised in Drawings/1:18 Undecorated section:
- GMD F40PH-2D drawings
- EMD F59PH drawings
- Coupler cut lever brackets
- Revised in Drawings/1:18 Painted section:
- AMT #526 (EMD F59PH)
- GOT #522 (EMD F59PH)
- VIA #6407 (GMD F40PH-2D)
- VIA #6438 (GMD F40PH-2D)
- Coupler cut lever brackets
2025-02-15
- Added in Drawings/1:18 Undecorated section:
- 6 EMD F40PH drawings (AMTK Phase 2a, 2b and 3a versions)
2025-01-26
- Revised in Drawings/1:18 Undecorated section:
- EMD SD38, SD39, SD40, SD40A, SD45 and SDP45 drawings (Phase 1b1 through 2b2 versions)
- Added bolted panel behind cab (right side)
- EMD SD38, SD39, SD40, SD40A, SD45 and SDP45 drawings (Phase 1b1 through 2b2 versions)
- Revised in Locomotive Descriptions and Phases section:
- EMD SD38, SD39, SD40, SD45
- Changed Phase 1b1 and added Phase 2b2 to refer to bolted panel behind cab
- EMD SD38, SD39, SD40, SD45
2025-01-26
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40, SD45 and SD40-2 drawings (LN, RI, SOU, SP and SSW versions)
- Nathan P-series horn dimensions
- EMD SD40, SD45 and SD40-2 drawings (LN, RI, SOU, SP and SSW versions)
2025-01-25
- Added production quantities for all remaining GE locomotive drawings
- Revised in Drawings/1:18 Undecorated section:
- All EMD/GMD GP7, GP9, GP18 and GP20 drawings
- Cab eave edge height
- Nathan P-series horn dimensions (IC, RI, SP and SSW versions)
- Cab sunshade and wind deflector height (IC and NW versions)
- EMD SD35 drawings (SP versions)
- Nathan P-series horn dimensions
- All EMD/GMD GP7, GP9, GP18 and GP20 drawings
2025-01-24
- Revised in Drawings/1:18 Undecorated section:
- GE AC4400CW and Dash 9-44CW drawings (SP versions)
- GE U28B drawings (RI versions)
- Nathan P-series horn dimensions
2025-01-23
- Revised in Drawings/1:18 Undecorated section:
- EMD GP8 and GP10 drawings
- Nathan P-series horn dimensions (except CR versions with Leslie horn)
- Cab eave edge height (except Phase 4 versions)
- EMD GP8 and GP10 drawings
2025-01-19
- Revised Drawing History sections (minor edits and clearer wording)
2025-01-18
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP39 drawings (CO version)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38 and GP40 drawings (Phase 1a4 through 2b1 versions)
- Added bolted panel behind cab (right side)
- EMD GP38 and GP40 drawings (Phase 1a4 through 2b1 versions)
- Revised in Locomotive Descriptions and Phases section:
- EMD GP38, GP39, GP40
- Changed Phase 1a4 and added Phase 2b1 to refer to bolted panel behind cab
- EMD GP38, GP39, GP40
2025-01-14
- Added in Drawings/1:18 Painted section:
- RI #4316 (EMD GP38-2)
- Added in Lettering and Logos section:
- RI "The Rock"
Past Updates - 2024
2024-11-26
- Added in Drawings/1:18 Undecorated section:
- 2 Thrall well car drawings (48' 3-unit drawbar-connected version, DTTX class TWG30)
2024-11-24
- Added in Drawings/1:18 Undecorated section:
- 2 Thrall well car drawings (40' stand-alone version, DTTX class TWF10M)
2024-11-23
- Added in Drawings/1:18 Undecorated section:
- 4 Thrall well car drawings (40' and 48' stand-alone versions)
2024-11-22
- Added in Photos section:
- 41 photos from 2024-11-20
2024-11-14
- Added in Photos section:
- 13 photos from 2024-11-14
2024-10-20
- Added in Photos section:
- 15 photos from 2024-10-11 (CBNS)
- 17 photos from 2024-08-15 (SLR)
2024-09-05
- Added in Drawings/1:18 Undecorated section:
- 2 Ingalls 4750 cu-ft hopper car drawings
- 2 Richmond Tank Car 4750 cu-ft hopper car drawings (later version)
- Revised in Drawings/1:18 Undecorated section:
- Richmond Tank Car 4750 cu-ft hopper car drawings
- Side post and underframe bolts
- Richmond Tank Car 4750 cu-ft hopper car drawings
2024-09-01
- Added in Drawings/1:18 Undecorated section:
- 2 Pullman-Standard 4750 cu-ft hopper car drawings (Phase 3b version)
- Revised in Drawings/1:18 Undecorated section:
- Pullman-Standard 4750 cu-ft hopper car drawings
- Added missing end grabirons
- Side post bottom edges
- Pullman-Standard 4750 cu-ft hopper car drawings
2024-08-30
- Added in Drawings/1:18 Undecorated section:
- 2 Gunderson 50' 6" 5327 cu-ft boxcar drawings
2024-08-28
- Added in Drawings/1:18 Undecorated section:
- 2 Gunderson 50' 6" 6269 cu-ft boxcar drawings (Phase 1 version)
- Revised in Drawings/1:18 Undecorated section:
- Gunderson 50' 6" 5277 cu-ft boxcar drawings
- Raised roof height
- Gunderson 50' 6" 6269 cu-ft boxcar drawings
- Minor underframe details
- Gunderson 50' 6" 5277 cu-ft boxcar drawings
2024-08-27
- Added in Photos section:
- 12 photos from 2024-08-11
- 17 photos from 2024-08-15
- 30 photos from 2024-08-25
2024-08-26
- Revised in Photos section:
- Increased image brightness for various photos taken on the following dates:
- 2011-06-22
- 2011-06-29
- 2011-06-30
- 2011-07-14 (CN)
- 2011-07-15 (CN)
- 2011-07-20
- 2011-08-01
- 2011-08-16
- 2012-07-02 (CN)
- 2012-07-03 (CN)
- 2012-08-02
- 2012-08-14
- 2012-08-17
- Increased image brightness for various photos taken on the following dates:
2024-08-23
- Added in Drawings/1:18 Undecorated section:
- 2 Trentonworks 50' 6" 6269 cu-ft boxcar drawings (NOKL 560800-560999)
- 2 Trinity 50' 6" 6235 cu-ft boxcar drawings (SRY 5350-5449)
2024-08-22
- Added in Drawings/1:18 Undecorated section:
- 2 Trinity 50' 6" 6235 cu-ft boxcar drawings (BNSF 728225-728399)
2024-08-21
- Added in Drawings/1:18 Undecorated section:
- 6 FMC 50' 7" 5258 cu-ft boxcar drawings (DRGW, SP and SSW versions)
- 6 FMC 50' 7" 5283 cu-ft boxcar drawings (SP and SSW versions)
- 2 FMC 50' 7" 6089 cu-ft boxcar drawings (SP version)
- 2 FMC 50' 7" 6289 cu-ft boxcar drawings (VCY version)
- Added build dates for 1:18 freight car drawings
2024-08-19
- Added in Drawings/1:18 Undecorated section:
- 4 FMC 50' 7" 5283 cu-ft boxcar drawings (CNA and MEC versions)
- Revised in Drawings/1:18 Undecorated section:
- FMC 50' 6" 5272 cu-ft boxcar drawings (MEC 31250-31749)
- Brake rigging height
- FMC 50' 6" 5272 cu-ft boxcar drawings (MEC 31250-31749)
- Reclassified boxcar drawings by builder
2024-08-13
- Added in Drawings/1:18 Undecorated section:
- 2 Gunderson 50' 6" 5277 cu-ft boxcar drawings
- 2 Trinity 3621 cu-ft hopper car drawings
- Revised in Drawings/1:18 Undecorated section:
- Gunderson 50' 6" 6269 cu-ft boxcar drawings (left-side views)
- Minor correction to brake beam layering
- Gunderson 50' 6" 6269 cu-ft boxcar drawings (left-side views)
2024-07-17
- Added in Drawings/1:18 Undecorated section:
- 2 Trinity 4750 cu-ft hopper car drawings
2024-07-11
- Added in Drawings/1:18 Undecorated section:
- 4 Pullman-Standard 4750 cu-ft hopper car drawings (Phase 2b and 2d versions)
2024-06-13
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD70M drawings (UP Phase 2d1 version)
2024-06-11
- Added in Drawings/1:18 Undecorated section:
- 10 EMD SD70M drawings (UP Phase 2a - 2c2 versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD70 / SD75 series and SD70MAC drawings (right side)
- Handbrake notch dimensions
- Taller door under dynamic brake intake (SD70 and SD70M only)
- EMD SD70 / SD75 series and SD70MAC drawings (right side)
- Revised in Drawings/1:18 Painted section:
- UP #1979 (EMD SD70M)
- Handbrake notch dimensions
- Taller door under dynamic brake intake
- UP #1979 (EMD SD70M)
- Revised in Locomotive Descriptions and Phases section:
- EMD SD70, SD75 series
- Numerous additional minor details
- Refined production dates
- Description about Phase 2a and later units
- EMD SD70, SD75 series
2024-06-10
- Revised in Drawings/1:18 Undecorated section:
- EMD SD38-2, SD39, SD45T-2 and SD70 drawings (versions with Nathan P-series horns)
- Nathan P-series horn dimensions
- EMD SD38-2 and SD45T-2 drawings (SP versions)
- Cab sunshade height
- All EMD SD60, SD60M and SD60I drawings
- Corrected minor glitches in wheel bearings
- Handrail stanchion spacing
- Narrower step plate behind cab (SD60 right side)
- Nathan P-series horn dimensions (CNW SD60 only)
- All GMD SD50F and SD60F drawings
- Corrected minor glitches in wheel bearings
- EMD SD38-2, SD39, SD45T-2 and SD70 drawings (versions with Nathan P-series horns)
- Revised in Drawings/1:18 Painted section:
- CN #5512 (GMD SD60F)
- DMVW #5454 (GMD SD50F)
- Corrected minor glitches in wheel bearings
- SP #9168 (EMD SD45T-2)
- Nathan P-series horn dimensions
- Cab sunshade height
2024-06-08
- Added in Drawings/1:18 Undecorated section:
- 2 GE ET44AC drawings (CN 3133-3285) - previously grouped with 3039-3120
- Revised in Drawings/1:18 Undecorated section:
- EMD GP40-3 drawings (SLR 3805-3806)
- EMD GP40X, GP50, GP59 and GP60 drawings (DRGW, SOU, SP and TM versions)
- Nathan P-series horn dimensions
- Cab sunshade height (DRGW, SP and TM versions)
- EMD GP50 and GP60 drawings (ATSF versions)
- EMD SD40-2 drawings (ATSF Phase 2c and 2d versions)
- Changed cab sunshade from sliding to fixed
- GE B36-7 drawings (SP 7754-7769)
- Changed Gyralites to Oscitrol PPC-11300
- Revised in Drawings/1:18 Painted section:
- SP #9724 (EMD GP60)
- Nathan P-series horn dimensions
- Cab sunshade height
- SP #9724 (EMD GP60)
2024-05-18
- Added in Drawings/1:18 Undecorated section:
- 9 GE ES44AC drawings (CP Phase 1c1 and 1f1 versions; UP Phase 1c1 through 1e versions)
- Revised in Drawings/1:18 Undecorated section:
- GE ES44AC drawings (UP Phase 1f1 through 2b versions)
- Cab numberboards
- GE ES44AC drawings (Phase 1f1 and earlier versions)
- Removed small bolted panel between dynamic brake intakes (right side)
- GE ES44AC drawings (UP Phase 1f1 through 2b versions)
2024-05-16
- Added in Drawings/1:18 Undecorated section:
- 8 GE ES44AC drawings (CP Phase 2a1 through 2f1 versions)
- Revised in Drawings/1:18 Undecorated section:
- GE ES44AC and ES44C4 drawings (right-side views)
- Right rear truck frame lettering (UP Phase 2d and earlier versions only)
- Piping behind air dryer (except BNSF and FXE versions)
- GE ES44AC and ES44C4 drawings (right-side views)
- Revised in Locomotive Descriptions and Phases section:
- GE ES Series
- Split Phase 2a1 into 2a1 and 2a2
- Renamed Phase 2a2 to 2a3
- GE ES Series
- Added in Photos section:
- 38 Bruce Chapman photos (George Matheson collection)
- 11 photos from 1997-02
- 27 photos from 1997-03
- 38 Bruce Chapman photos (George Matheson collection)
2024-05-14
- Added in Photos section:
- 127 Bruce Chapman photos (George Matheson collection)
- 55 photos from 1995
- 72 photos from 1996
- 127 Bruce Chapman photos (George Matheson collection)
2024-05-03
- Added in Photos section:
- 237 Bruce Chapman photos (George Matheson collection)
- 83 photos from 1993
- 154 photos from 1994
- 237 Bruce Chapman photos (George Matheson collection)
2024-04-24
- Added in Photos section:
- 291 Bruce Chapman photos (George Matheson collection)
- 75 photos from 1990
- 114 photos from 1991
- 102 photos from 1992
- 291 Bruce Chapman photos (George Matheson collection)
2024-04-20
- Added in Photos section:
- 137 photos from 2024-04-18
- Revised in Photos section:
- Re-processed photos (adjusted exposure and cropped as needed)
- 2007-08-19 through 2007-11-30
- 2006 (all dates)
- Re-processed photos (adjusted exposure and cropped as needed)
2024-04-19
- Added in Photos section:
- 6 photos from 2007-01-14
- 3 photos from 2007-01-24
- Revised in Photos section:
- Re-processed photos (adjusted exposure and cropped as needed)
- 2007-01-02 through 2007-07-06
- 2015-03-31
- Re-processed photos (adjusted exposure and cropped as needed)
2024-04-15
- Added in Photos section:
- 41 George Parks photos (George Matheson collection)
- 3 photos from 1998
- 23 photos from 1999
- 15 photos from 2000
- 41 George Parks photos (George Matheson collection)
2024-04-10
- Added in Photos section:
- 118 George Parks photos (George Matheson collection)
- 1 photo from 1994
- 15 photos from 1995
- 21 photos from 1996
- 81 photos from 1997
- 118 George Parks photos (George Matheson collection)
2024-04-06
- Added in Photos section:
- 85 George Matheson photos
- 1 photo from 1996-03
- 7 photos from 1996-04
- 6 photos from 1996-05
- 9 photos from 1996-06
- 6 photos from 1996-07
- 5 photos from 1996-08
- 14 photos from 1996-09
- 1 photo from 1996-10
- 3 photos from 1996-11
- 1 photo from 1997-05-17
- 4 photos from 2001-01
- 7 photos from 2001-03
- 2 photos from 2001-04-15
- 2 photos from 2001-05-17
- 5 photos from 2001-06
- 3 photos from 2001-07
- 1 photos from 2001-10-12
- 8 photos from 2001-12
- 85 George Matheson photos
2024-04-05
- Added in Photos section:
- 20 George Matheson photos
- 1 photo from 1998-02
- 2 photos from 1998-08
- 4 photos from 1998-09
- 1 photo from 1999-03
- 2 photos from 1999-05
- 2 photos from 1999-07
- 8 photos from 1999-09-28
- 20 George Matheson photos
2024-04-04
- Added in Photos section:
- 61 George Matheson photos
- 11 photos from 2014
- 6 photos from 2015
- 16 photos from 2016
- 18 photos from 2017
- 10 photos from 2018
- 61 George Matheson photos
2024-03-30
- Added in Photos section:
- 69 George Matheson photos
- 2 photos from 2010-03
- 11 photos from 2010-04
- 2 photos from 2010-05
- 1 photo from 2010-06
- 6 photos from 2010-07
- 3 photos from 2010-09
- 2 photos from 2010-10
- 2 photos from 2011-06
- 3 photos from 2011-08
- 1 photo from 2012-03
- 5 photos from 2012-05
- 4 photos from 2012-06
- 7 photos from 2012-07
- 1 photo from 2012-08
- 6 photos from 2012-09
- 2 photos from 2012-10
- 1 photo from 2012-11
- 3 photos from 2013-01
- 2 photos from 2013-02
- 2 photos from 2013-03
- 2 photos from 2013-04
- 1 photo from 2013-05
- 69 George Matheson photos
2024-03-28
- Added in Photos section:
- 62 George Matheson photos
- 7 photos from 2006-02
- 1 photo from 2006-03
- 3 photos from 2006-04
- 2 photos from 2006-05
- 1 photo from 2006-06
- 1 photo from 2006-07
- 2 photos from 2006-09
- 3 photos from 2006-10
- 4 photos from 2007-04
- 1 photo from 2007-06
- 1 photo from 2007-07
- 2 photos from 2007-08
- 2 photos from 2008-09
- 3 photos from 2009-05
- 2 photos from 2009-06
- 11 photos from 2009-07
- 13 photos from 2009-08
- 3 photos from 2009-09
- 62 George Matheson photos
2024-03-26
- Added in Photos section:
- 10 George Matheson photos
- 5 photos from 2005-06
- 2 photos from 2005-07
- 2 photos from 2005-08
- 1 photo from 2005-11
- 10 George Matheson photos
2024-03-25
- Added in Photos section:
- 28 George Matheson photos
- 3 photos from 2005-01
- 19 photos from 2005-02
- 6 photos from 2005-03
- 28 George Matheson photos
2024-03-24
- Added in Photos section:
- 31 George Matheson photos
- 5 photos from 2004-03
- 1 photo from 2004-05
- 3 photos from 2004-06
- 1 photo from 2004-07
- 1 photo from 2004-09
- 18 photos from 2004-10
- 2 photos from 2004-12
- 31 George Matheson photos
2024-03-23
- Added in Photos section:
- 89 George Matheson photos
- 1 photo from 2002-05
- 12 photos from 2002-06
- 6 photos from 2002-07
- 4 photos from 2002-08
- 14 photos from 2002-09
- 1 photo from 2002-10
- 5 photos from 2002-12
- 2 photos from 2003-01
- 1 photo from 2003-02
- 5 photos from 2003-03
- 3 photos from 2003-04
- 11 photos from 2003-05
- 3 photos from 2003-07
- 1 photo from 2003-11
- 1 photo from 2003-12
- 1 photo from 2004-01
- 18 photos from 2004-02
- 89 George Matheson photos
2024-03-11
- Added in Photos section:
- 29 George Matheson photos
- 19 photos from 2000-02
- 10 photos from 2000-03
- 29 George Matheson photos
2024-03-09
- Added in Photos section:
- 13 George Matheson photos
- 13 photos from 2000-01
- 13 George Matheson photos
2024-03-06
- Added in Photos section:
- 30 George Matheson photos
- 1 photo from 1998-05
- 8 photos from 1998-07
- 2 photos from 1998-08
- 6 photos from 1998-10
- 3 photos from 1999-08
- 6 photos from 1999-09
- 1 photo from 1999-10
- 3 photos from 1999-12
- 30 George Matheson photos
2024-03-05
- Added in Photos section:
- 83 George Matheson photos
- 6 photos from 1999-01
- 25 photos from 1999-02
- 12 photos from 1999-03
- 3 photos from 1999-04
- 2 photos from 1999-05
- 1 photo from 1999-07
- 6 photos from 1999-08
- 2 photos from 1999-09
- 3 photos from 1999-10
- 3 photos from 1999-11
- 1 photo from 1999-12
- 1 photo from 2000-01
- 3 photos from 2000-04
- 1 photo from 2000-05
- 1 photo from 2000-10
- 1 photo from 2000-12
- 3 photos from 2001-02
- 1 photo from 2001-03
- 2 photos from 2001-05
- 1 photo from 2002-04
- 3 photos from 2002-05
- 1 photo from 2002-06
- 1 photo from 2002-12
- 83 George Matheson photos
2024-03-04
- Added in Photos section:
- 5 photos from 2024-02-27
- Added in Photos section:
- 22 George Matheson photos
- 8 photos from 1997-09
- 13 photos from 1997-10
- 1 photo from 1997-11
- 22 George Matheson photos
2024-03-02
- Added in Photos section:
- 12 photos from 2024-03-01
2024-02-24
- Added in Photos section:
- 6 photos from 2023-09-29
2024-02-10
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD50 drawings (MP version)
2024-01-30
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD50 drawings (CNW version)
2024-01-29
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD50 drawings (CO / SBD Phase 2a1 versions)
- Revised in Drawings/1:18 Undecorated section:
- Changed model name for BN 3158-3162 from GP50L (incorrect) to GP50
- Revised in Locomotive Descriptions and Phases section:
- EMD GP39X, GP49, GP50
- Added general description and history
- Converted phases to tabular format
- Added railroad variations with illustrations
- Added references
- EMD SD50, SD60
- Converted phases to tabular format
- EMD GP39X, GP49, GP50
2024-01-28
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD50 drawings (CO/SBD Phase 2a2 and 2c versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD50 drawings
- Corrected minor glitches in wheel bearings, left side traction motor cables, and left rear coupler cut lever
- Handrail stanchion spacing
- Hood door and radiator intake height
- Rear hood door widths
- Shorter walkway blower duct (left side)
- Narrower step plate behind cab (right side)
- Added wind deflector behind cab side window (BO version only)
- EMD SD50 drawings
2024-01-26
- Added in Drawings/1:18 Painted section:
- SLQ #3516 (MLW M-420)
- Revised in Drawings/1:18 Undecorated section:
- All MLW M-420 drawings
- Corrected minor glitches in cab sunshades and class lights
- All MLW M-420 drawings
2024-01-25
- Added in Drawings/1:18 Undecorated section:
- 2 EMD JT42CWR-T1 drawings (late DRS / Fastline / Freightliner / GBRF version)
2024-01-22
- Added in Drawings/1:18 Undecorated section:
- 4 EMD JT42CWR drawings (DRS / Freightliner / GBRF versions)
- 2 EMD JT42CWR-T1 drawings (early DRS / GBRF version)
2024-01-21
- Added in Drawings/1:18 Undecorated section:
- 2 EMD JT42CWR drawings (late EWS version)
2024-01-20
- Added in Drawings/1:18 Undecorated section:
- 2 EMD JT42CWR drawings (early EWS / Freightliner version)
2024-01-11
- Revised in Drawings/1:18 Undecorated section:
- ALCO C-420 drawings (Phase 1a-2a versions)
- Hood door handles
- Air reservoir supports (LHR Phase 1a version only)
- ALCO C-420 drawings (Phase 1a-2a versions)
- Revised in Locomotive Descriptions and Phases section:
- ALCO/MLW C-420, C-424, C-425
- Added phase detail drawings (C-420, C-425)
- Added sample photos
- ALCO/MLW C-420, C-424, C-425
- Updated Drawing Methods sections (minor corrections and updates)
2024-01-09
- Added in Drawings/1:18 Painted section:
- SLR #806 (EMD RM-1)
- Revised in Locomotive Descriptions and Phases section:
- ALCO/MLW C-420, C-424, C-425
- Combined C-424 and C-425 pages (previously separate)
- Added C-420 phases
- Corrected / expanded C-424 and C-425 phases
- Added general history and model descriptions
- Added references
- ALCO/MLW FA, PA series
- Consolidated model descriptions into first section, with second section only describing phase and production details
- Expansion of model histories and description of 244 and 251 series engines
- Converted FA-2 phases to tabular format
- Added description and phases for PA-1 and PA-2
- ALCO/MLW RS-2, RS-3
- Additional details describing 244 series engine
- ALCO/MLW C-420, C-424, C-425
2024-01-04
- Revised in Drawings/1:18 Undecorated section:
- EMD GP11 drawings (except CRR versions)
- Nathan P-series horn dimensions
- EMD GP40-3 and RM-1 drawings (right-side views)
- Removed central hood doors (RM-1 only)
- Corrected handrail glitch on back of cab (SLR 3804 and 804-806 only)
- EMD GP11 drawings (except CRR versions)
- Added "What's New" archive from 2001-2005 (pieced together from the Wayback Machine)
2024-01-03
- Added in Drawings/1:18 Undecorated section:
- 6 ALCO C-424 drawings (EL and NdeM / WAB versions)
- 2 ALCO C-425 drawings (NW Phase 2a version)
- Revised in Drawings/1:18 Undecorated section:
- ALCO C-420 drawings (NW version)
- Short hood details
- ALCO C-425 drawings (Phase 1 versions)
- MLW C-424 drawings (as-built versions)
- Hood door latches
- ALCO C-420 drawings (NW version)
2024-01-01
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO C-424 drawings (SPS version)
- 6 ALCO C-425 drawings (CNW and SPS versions)
Past Updates - 2023
2023-12-31
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO C-425 drawings (PRR Phase 2 versions)
- Revised in Drawings/1:18 Undecorated section:
- ALCO C-425 drawings (PRR Phase 1 version)
- Added dummy MU receptacle on end handrails
- Revised axle speed recorders
- ALCO C-425 drawings (PRR Phase 1 version)
2023-12-30
- Added in Drawings/1:18 Undecorated section:
- 2 MLW RS-3 drawings (PGE 572)
- Revised in Locomotive Descriptions and Phases section:
- ALCO/MLW FA series
- ALCO/MLW RS-2, RS-3
- ALCO RS-11
- EMD GP30
- EMD GP28, GP35
- EMD GP38, GP39, GP40
- EMD GP40-2
- GE B32-8, B39-8, Dash 8-40B
- Revised toggle system for showing illustrations
- Added comparison illustrations with previous model (GP40, GP40-2)
- EMD GP40X
- Added illustrations of all variations
2023-12-29
- Added in Drawings/1:18 Undecorated section:
- 2 MLW RS-3 drawings (PGE 576-578)
2023-12-28
- Added in Drawings/1:18 Undecorated section:
- 2 MLW RS-3 drawings (PGE 573-575)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-3 drawings (versions with P-series horns)
- EMD GP39X drawings
- EMD GP40 drawings (IC, RI and SSW versions)
- Nathan P-series horn dimensions
- EMD GP40 drawings (Phase 2c left-side views)
- Bottom latch on second hood door
2023-12-27
- Added in Drawings/1:18 Undecorated section:
- 2 MLW RS-3 drawings (PGE Phase 1c version)
- 4 MLW RSC-3 drawings (PGE versions)
- Revised in Locomotive Descriptions and Phases section:
- ALCO RS-2, RS-3
- Added MLW RS-3 phases
- Added separate description for RSC-2 and RSC-3
- Added Phase 1c (in place of Phase 1b3)
- ALCO RS-2, RS-3
2023-12-24
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RSC-2 drawings (demonstrator version)
- Revised in Locomotive Descriptions and Phases section:
- ALCO RS-2, RS-3
- Minor detail additions
- Added generic illustrations
- ALCO RS-2, RS-3
2023-12-23
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RS-2 drawings (generic version)
2023-12-21
- Revised in Drawings/1:18 Undecorated section:
- ALCO RSD-12 drawings (except SP version)
- Truck brake cylinders
- MLW RSC-14 drawings
- Truck brake cylinders, brake rigging and sand lines
- ALCO RSD-12 drawings (except SP version)
2023-12-18
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RS-3 drawings (MEC version)
2023-12-17
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO RS-3 drawings (BM versions)
- Revised in Drawings/1:18 Undecorated section:
- ALCO RS-11 drawings (Phase 1c1 and later versions)
- ALCO RSD-12 drawings (Phase 1b and later versions)
- ALCO RS-36 drawings
- All MLW RS-10, RS-18 and RSC-14 drawings
- Corrected number of radiator shutters
2023-12-15
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO RS-3 drawings (DH versions)
- Added in Locomotive Descriptions and Phases section:
- ALCO RS-2, RS-3
2023-12-14
- Added in Drawings/1:18 Undecorated section:
- 6 ALCO RS-3 drawings (generic and NH versions)
2023-11-28
- Revised in Drawings/1:18 Undecorated section:
- ALCO RS-11 drawings (LV and SP versions with low short hood)
- Hood corner notch and side door dimensions
- ALCO RS-11 drawings (LV and SP versions with low short hood)
2023-11-25
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RSD-12 drawings (SP version)
2023-11-22
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO RSD-12 drawings (LSI versions)
2023-11-21
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RSD-12 drawings (CO version)
- Added in Locomotive Descriptions and Phases section:
- ALCO RSD-12
- Revised in Locomotive Descriptions and Phases section:
- GE B32-8, B39-8, Dash 8-40B
- Added sample photos
- Added drawings
- GE B32-8, B39-8, Dash 8-40B
2023-11-20
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RSD-12 drawings (PRR version)
- Revised in Drawings/1:18 Undecorated section:
- ALCO RS-11 drawings (Phase 1a right-side views)
- Added missing step behind cab
- ALCO RS-11 drawings (Phase 1a right-side views)
2023-11-12
- Added in Drawings/1:18 Undecorated section:
- 6 GE B30-7 drawings (SP Phase 1a to 2b versions)
- Revised in Drawings/1:18 Undecorated section:
- GE B23-7 drawings (ATSF Phase 1b and 2b left-side views)
- Added louvers on bolted panel under cab
- GE B23-7 drawings (ATSF Phase 1b and 2b left-side views)
2023-11-11
- Added in Drawings/1:18 Undecorated section:
- 2 GE B23-7 drawings (SP version)
- 2 GE B30-7 drawings (SSW version)
- 2 GE B36-7 drawings (SP Phase 3d version)
- Revised in Drawings/1:18 Undecorated section:
- 4-axle Dash 7 series drawings (all Phase 3 versions)
- Increased underframe height
- 4-axle Dash 7 series drawings (all Phase 3 versions)
2023-11-09
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD24 drawings (early ATSF version)
2023-11-08
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD24 drawings (CBQ and UP versions)
- 2 EMD SD24B drawings
2023-11-02
- Added in Drawings/1:18 Undecorated section:
- 2 Trinity 3260 cu-ft hopper car drawings
2023-10-30
- Added in Drawings/1:18 Undecorated section:
- 2 Thrall 3250 cu-ft hopper car drawings
- Continued transfer of 1:55 drawings from old pages to drawing search:
- Thrall and Trinity covered hoppers
2023-10-25
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 drawings (CEI, RI, SP and SSW versions)
- EMD GP38 and GP38AC drawings (LN and SOU versions)
- EMD GP38-2 drawings (CNW, LIRR, LN, RI, SOO and SOU versions)
- Nathan P-series horn dimensions
- EMD GP38 and GP38AC drawings (Phase 2c left-side views)
- Bottom latch on second hood door
2023-10-23
- Added in Drawings/1:18 Undecorated section:
- 4 Trinity 2980 cu-ft hopper car drawings
- Revised in Drawings/1:18 Undecorated section:
- EMD GP26 drawings
- EMD GP28 drawings (IC versions)
- EMD GP30 drawings (ACL, CEI, SP and SSW versions)
- Nathan P-series horn dimensions
2023-10-22
- Revised in Drawings/1:18 Undecorated section:
- ALCO C-420 and C-425 drawings (NW versions)
- ALCO RS-11 and RS-36 drawings (NW and SP versions)
- Nathan P-series horn dimensions
2023-10-21
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO C-420 drawings (LN versions)
- Revised in Drawing Parts and Components page
- Nathan Airchime P-series horns
- Manifold dimensions and bell mounting locations
- Slightly revised bell dimensions
- Added P5a and P01235
- Nathan Airchime P-series horns
2023-10-17
- Added in Drawings/1:18 Undecorated section:
- 10 EMD RM-1 drawings (G&W GP38/GP40 rebuilds)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP40-3 drawings (SLR 3805-3806)
- Added missing MU connector on rear walkway
- EMD GP40-3 drawings (SLR 3805-3806)
2023-10-16
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP40-3 drawings (G&W GP40 rebuilds)
2023-08-30
- Added in Photos section:
- 5 photos from 2023-08-21 (Exporail)
- 70 photos from 2023-08-17 (Exporail)
2023-08-20
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO C-420 drawings (NW version)
- Revised in Drawings/1:18 Undecorated section:
- All ALCO C-420 drawings
- Changed battery boxes from bolted to hinged
- All ALCO C-420 drawings
2023-08-19
- Added in Drawings/1:18 Undecorated section:
- 2 EMD F59PHI drawings (CDTX 2001-2009)
- Added 1:110 Drawings page
- Continued transfer of 1:55 drawings from old pages to drawing search:
- Undecorated SNCF Trains
2023-08-18
- Added Drawing Parts and Components page
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD40-2 (UP versions)
- EMD SD40-2S
- EMD SD70M
2023-08-17
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD40-2 (SOO versions)
- Bulkhead flatcars
- Centerbeam flatcars
2023-08-16
- Added in Drawings/1:18 Undecorated section:
- 8 Trentonworks 50' 6" 6269 cu-ft boxcar drawings
- Added in Photos section:
- 3 photos from 2023-08-01
- 36 photos from 2023-07-31
- 22 photos from 2023-07-30
- 37 photos from 2023-07-29
2023-08-12
- Added in Drawings/1:18 Undecorated section:
- 6 Thrall 73' Centerbeam flatcar drawings
2023-08-09
- Added in Drawings/1:18 Undecorated section:
- 4 NSC 73' Centerbeam flatcar drawings
- 4 Trentonworks / ARI 73' Centerbeam flatcar drawings
2023-07-18
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO C-420 drawings (LV and SAL versions)
2023-07-17
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO C-420 drawings (LHR versions)
2023-07-11
- Revised in Drawings/1:18 Painted section:
- ICG #8719 (EMD GP11)
- Moved latches under radiators from 2nd to 3rd door from long hood end
- ICG #8719 (EMD GP11)
2023-07-10
- Revised in Drawings/1:18 Undecorated section:
- All EMD/GMD GP7 through GP20 series drawings (right side views)
- Moved latches under radiators from 2nd to 3rd door from long hood end
- All EMD/GMD GP7 through GP20 series drawings (right side views)
2023-06-29
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP18 drawings (MP 4825-4826, 400-411)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP18 drawings (MP versions)
- Removed cab arm rests
- Added short hood grabirons and lift rings above first hood door (versions with low short hood)
- EMD GP18 drawings (MP versions)
2023-04-28
- Added in Drawings/1:18 Undecorated section:
- 4 GMD GP9 drawings (CN and CP Phase 3a versions)
- Revised in Locomotive Descriptions and Phases section:
- EMD/GMD GP7, GP9
- Minor corrections/additions to GMD GP9 Phases (cab side seams and fuel tank shape)
- EMD/GMD GP7, GP9
2023-04-25
- Added in Drawings/1:18 Undecorated section:
- 2 GMD GP9 drawings (CN Phase 3a version)
2023-04-24
- Added in Drawings/1:18 Undecorated section:
- 8 GMD GP9 drawings (CP versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP7 drawings
- EMD GP9 and GP9B drawings (Phase 1a and 1b versions)
- All GMD GP7 and GP9 drawings
- Step kick plate height
2023-04-23
- Added in Drawings/1:18 Undecorated section:
- 6 GMD GP9 drawings (CN Phase 2a and 2b versions; class GR-17 g/n/p, q and r)
2023-04-20
- Added in Drawings/1:18 Undecorated section:
- 6 GMD GP9 drawings (CN Phase 1b, 2a and 2b versions)
- Revised in Drawings/1:18 Undecorated section:
- GMD GP7 and GP9 drawings (CN versions)
- Front flag holder location
- Truck axle pedestal wear plates
- GMD GP7 and GP9 drawings (CN versions)
2023-04-09
- Added in Photos section:
- 14 photos from 2023-04-09
2023-04-08
- Added in Drawings/1:18 Undecorated section:
- 2 GMD GP7 drawings (CN Phase 2d version)
- 4 GMD GP9 drawings (CN Phase 1a and 1b versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP7 drawing (WP left-side view)
- EMD GP9 drawings (most Phase 1a, 1b and 2 left-side views)
- Air reservoir piping
- GMD SD40 drawings (CN versions)
- Lower sand pipe under cab (CN 5000-5087)
- Added sand pipes running below walkway sideframe (CN 5088-5240)
- Revised in Drawings/1:18 Painted section:
- QGRY #3327 (GMD SD40-3)
- Added sand pipes running below walkway sideframe
- QGRY #3327 (GMD SD40-3)
2023-03-21
- Added in Photos section:
- 26 photos from 2023-03-21
2023-03-18
- Added in Photos section:
- 34 photos from 2023-03-18
2023-03-10
- Added in Photos section:
- 30 photos from 2023-03-09
2023-03-04
- Added in Drawings/1:18 Undecorated section:
- 4 GE AC44C6M drawings (NS 4125-4500 variations)
- Revised in Drawings/1:18 Undecorated section:
- GE AC44C6M drawings
- Traction motor cables
- Air pipes above air reservoirs (right side) (NS 4125-4500)
- GE AC44C6M drawings
2023-03-02
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP18 drawings (CG version)
2023-02-25
- Added in Drawings/1:18 Undecorated section:
- 8 EMD GP18 drawings (MP versions)
2023-02-21
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP8, GP10 and GP11 drawings
- Fuel tank height
- All EMD GP8, GP10 and GP11 drawings
- Revised in Drawings/1:18 Painted section:
- ICG #7918 (EMD GP8)
- ICG #8719 (EMD GP11)
- SLQ #8748 (EMD GP11)
- Fuel tank height
2023-02-20
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO PA-1 drawings (GMO version)
2023-02-19
- Added in Drawings/1:18 Undecorated section:
- 6 ALCO FA-1 drawings (demonstrator and GMO versions)
2023-02-18
- Added in Drawings/1:18 Undecorated section:
- 6 ALCO FA-2 drawings (MP versions)
- 2 ALCO FB-2 drawings (generic Phase 2 version)
- Revised in Drawings/1:18 Undecorated section:
- EMD Dash 7 series drawings (most LN, SBD and SCL versions)
- Bottom taper on stairwell side sheet
- EMD Dash 7 series drawings (most LN, SBD and SCL versions)
- Revised in Drawings/1:18 Painted section:
- SCL #5134 (GE BQ23-7)
- Bottom taper on stairwell side sheet
- SCL #5134 (GE BQ23-7)
2023-02-16
- Added in Drawings/1:18 Undecorated section:
- 8 EMD GP9 drawings (UP Phase 1a-1b versions)
- 2 EMD GP9B drawings (UP Phase 1a version)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP7, GP9, GP18 and GP20 drawings
- Fuel tank height
- Fuel filler (except UP and WP versions)
- Added missing line segment on bottom front edge of generator room doors (GP20 right-side views only)
- All EMD GP7, GP9, GP18 and GP20 drawings
2023-02-14
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP9 drawings (PRR Phase 3c version)
- 2 rebuilt EMD GP9 drawings (UP 301, 305)
- 2 rebuilt EMD GP9B drawings (UP 308B)
2023-02-13
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP7 drawings (WP version)
- 4 EMD GP9B drawings (PRR and UP versions)
2023-02-11
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP9 drawings (UP Phase 3c and WP versions)
2023-02-07
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP9 drawings (IC Phase 1a-2 versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP9, GP18 and GP20 drawings
- Removed handrail stanchion top clamps
- Adjusted handrail stanchion spacing next to short hood (versions with low short hood only)
- Added missing section of front hood doors (GP20 right-side views, except GN and UP versions)
- All EMD GP9, GP18 and GP20 drawings
2023-02-04
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP18 drawings (NKP version)
- 4 EMD GP20 drawings (ATSF versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP9 (IC left-side view)
- EMD GP18 (IC left-side view)
- Corrected slight misplacement of bell
- EMD GP20 drawings (UP version)
- Corrected line glitch in MU connector housing
2023-01-27
- Added in Drawings/1:18 Undecorated section:
- 6 GE U33B drawings (RI versions)
- 2 GE U30C drawings (RI version)
2023-01-24
- Revised in Drawings/1:18 Undecorated section:
- EMD GP20, GP40, SD40 and SD45 drawings (CBQ versions)
- GE U28B and U30B drawings (CBQ versions)
- Removed end drop steps and handrail chains
- GE U30B drawings (ACL version)
- GE U33B drawings (SCL Phase 2a version)
- Added rear Gyralite
2023-01-21
- Added in Drawings/1:18 Undecorated section:
- 4 GE U23B drawings (NDEM versions)
- 2 GE U28B drawings (LN version)
2023-01-20
- Added in Drawings/1:18 Undecorated section:
- 4 GE U28B drawings (RI versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD70MAC drawings
- Hood door and radiator intake height
- Inverter cabinet dimensions
- MU sockets on pilot
- EMD SD70MAC drawings
2023-01-19
- Revised in Drawings/1:18 Undecorated section:
- EMD SD60 and DC SD70 series drawings
- Hood door and radiator intake height
- Reversed orientation of radiator intakes (most SD60M left-side views)
- MU sockets on pilot (SD70 only)
- EMD SD60 and DC SD70 series drawings
- Revised in Drawings/1:18 Painted section:
- ONT #2105 (EMD SD75I)
- UP #1979 (EMD SD70M)
- Hood door and radiator intake height
2023-01-17
- Added in Drawings/1:18 Painted section:
- UP #1979 (EMD SD70M)
2023-01-16
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD70M drawings (UP Phase 1f version)
2023-01-15
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD70M drawings (UP Phase 1e version)
2023-01-14
- Added in Drawings/1:18 Undecorated section:
- 8 EMD GP9 drawings (NW versions)
- 2 EMD GP18 drawings (NW version)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP18 and GP20 right-side views (most versions with high short hood)
- Added toilet drain pipe behind front steps
- EMD GP18 and GP20 right-side views (most versions with high short hood)
2023-01-10
- Added in Drawings/1:18 Undecorated section:
- 4 GMD GP38-2 drawings (CP version)
- Revised in Drawings/1:18 Painted section:
- BN #8004 (EMD SD40-2)
- BNSF #8010 (EMD SD40-2)
- BO #1977 (EMD GP40-2)
- BO #4331 (EMD GP40-2)
- CBNS #3366 (EMD SD40-2)
- CN #5250 (GMD SD40-2(W))
- CN #5570 (GMD GP38-2(W))
- CN #9511 (GMD GP40-2L(W))
- CR #3400 (EMD GP40-2)
- CR #6381 (EMD SD40-2)
- DTI #224 (EMD GP38-2)
- DTI #6419 (EMD GP40-2)
- GTW #5836 (EMD GP38-2)
- LN #8158 (EMD SD40-2)
- MKT #621 (EMD SD40-2)
- SOO #4452 (EMD GP38-2)
- WP #3555 (EMD GP40-2)
- Long hood end seams
- CMQ #9020 (GMD SD40-2F)
- CP #9009 (GMD SD40-2F)
- Truck axle bearing housings
2023-01-09
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2, GP39-2, GP40-2, SD38-2, SD40-2 and SD45-2 drawings
- GMD GP38-2(W), GP40-2(W) and GP40-2L(W) drawings
- Long hood end seams
- GMD GP38AC drawings (CP version)
- Changed panel under headlight from round to flat
- Corrected minor line glitches near stairwells
- GMD SD40-2 drawings (CP versions)
- Flag holders and lift rings under radiator intakes
- GMD SD40-2F drawings
- Truck axle bearing housings
2023-01-06
- Revised in Drawings/1:18 Undecorated section:
- EMD SD45T-2 drawings
- Fan hatches under radiators
- Taller doors ahead of right-side radiator intake
- EMD SD45T-2 drawings
- Added in Drawings/1:18 Painted section:
- SP #9168 (EMD SD45T-2)
- Added in Lettering and Logos section:
- SP lettering (Roman letters)
- SP hood end lettering
- SSW lettering
2023-01-04
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP40-2 drawings (DRGW versions)
- 4 EMD SD45T-2 drawings (SP 9344-9370, SSW 9371-9404)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD45T-2 drawings (right-side views)
- Corrected minor sand line glitch above rear truck
- EMD SD45T-2 drawings (right-side views)
2023-01-02
- Added in Drawings/1:18 Undecorated section:
- 8 EMD GP40X drawings (SP and UP versions)
- Revised in Locomotive Descriptions and Phases section:
- EMD GP40X
- Added a few details for ATSF and SOU variations
- Corrected as-built (vs. as-modified) details for UP version
- EMD GP40X
2023-01-01
- Removed former "Locomotive Components" Page from Info. and Drawings pages (merged content into Locomotive Descriptions and Phases section)
Past Updates - 2022
2022-12-29
- Revised in Locomotive Descriptions and Phases section:
- GE C30-7, C30-7A, C36-7 Phases
- GE AC4400CW Phases
- Added sample detail photos
- Added title photos to most pages
2022-12-28
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP40X drawings (ATSF versions)
- Added in Locomotive Descriptions and Phases section:
- EMD GP40X history and description
2022-12-27
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP40X drawings (SOU version)
- 4 EMD GP40-3 drawings (SLR 3805 and 3806)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP39X and GP50 drawings (SOU versions)
- Fuel tank details
- Added roof vent ahead of cab
- EMD GP39X and GP50 drawings (SOU versions)
2022-12-21
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-3 drawings (NS versions)
- EMD GP39X and GP50 drawings (SOU versions)
- End handrail height
- EMD SD70, SD70I and SD75I drawings
- Fuel tank length
- Revised in Drawings/1:18 Painted section:
- ONT #2105 (EMD SD75I)
- Fuel tank length
- ONT #2105 (EMD SD75I)
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD70, SD70I, SD75I, SD75M
- GE GG1
- Steam locomotive drawings (ALCO FEF-2 and FEF-3; MLW H-1b and H-1e)
- Road vehicles (incorporated into "Road vehicles, Lineside Structures and Equipment" page)
- Revised in Locomotive Descriptions and Phases section:
- EMD SD70, SD75 series phases
- Split Phase 1c into Phases 1c, 1d1 and 1d2 (based on fuel tank details)
- Renamed Phases 1d and 1e to Phases 1e and 1f
- EMD SD70, SD75 series phases
2022-12-20
- Added system for displaying quantity of locomotives for a given number series in the lists of 1:18 drawings
- Continued transfer of 1:55 drawings from old pages to drawing search:
- GMD SD40-2
- Revised in Locomotive Descriptions and Phases section:
- GMD SD40-2 Phases
- Renamed Phase 2d1 to Phase 2d
- Split / renamed Phase 2d2 into Phases 2e1 and 2e2
- GMD SD40-2 Phases
2022-12-19
- Added in Lettering and Logos section:
- PRR numbers
- WP logo
2022-12-18
- Added in Lettering and Logos section:
- WP lettering (early version)
2022-12-17
- Revised in Drawings/1:18 Painted section:
- BN #3118 (EMD GP50)
- BN #8004 (EMD SD40-2)
- BNSF #8010 (EMD SD40-2)
- CSXT #1896 (GE U18B)
- DTI #6419 (EMD GP40-2)
- DWP #3600 (ALCO RS-11)
- DWP #5904 (EMD SD40)
- Changed number font
- Lettering (BN #3118 and #8004)
- Logo (BN #8004 only)
- Added in Lettering and Logos section:
- BN logo (version 2)
- CP script lettering
- Revised in Lettering and Logos section:
- BN lettering (new photo trace instead of modified font)
- BN, BNSF H1 and CSXT numbers (changed font to Neue Haas Grotesk Medium)
2022-12-16
- Updated the Creating the Drawings section
- Divided page into four separate parts
- Added sections about research, reference images and image-tracing
- Relocated several paragraphs previously in the Drawing Accuracy page
2022-12-15
- Added in Drawings/1:18 Painted section:
- WP #3555 (EMD GP40-2)
- Revised in Drawings/1:18 Painted section:
- DTI #224 (EMD GP38-2)
- Corrected minor colour/line errors along walkway and handrails
- DTI #224 (EMD GP38-2)
- Added in Lettering and Logos section:
- WP numbers
2022-12-13
- Added in Lettering and Logos section:
- UP 11" lettering and 20" lettering with 5/16" border
- UP 20" numbering (redrawn)
- WP lettering
- Revised in Drawings/1:18 Painted section:
- UP #8424 (EMD SD70ACe)
- Cab numbers
- UP #8424 (EMD SD70ACe)
2022-12-12
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP15D, GP20D, GP20C-ECO and GP26 drawings
- All EMD SD60, SD60I and SD60M drawings
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions (versions with Leslie horns)
- Revised in Drawings/1:18 Painted section:
- CEFX #2040 (EMD GP20D)
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
- CEFX #2040 (EMD GP20D)
- Added in Lettering and Logos section:
- UP 20" lettering with 7/8" border
2022-12-11
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP59 and GP60 series drawings
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
- Anticlimber and MU receptacle brackets (except GP60B, GP60M and Phase 2d GP60)
- EMD SD39, SD40 and SD45 drawings (SP/SSW versions with large plow)
- EMD SD40-2 drawings (Family Lines, NW and SOU versions with large plow)
- Air pipe routing through plow, behind steps and through underframe
- All EMD GP59 and GP60 series drawings
- Revised in Drawings/1:18 Painted section:
- ATSF #143 (EMD GP60M)
- ATSF #345 (EMD GP60B)
- SP #9724 (EMD GP60)
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2022-12-10
- Added in Drawings/1:18 Painted section:
- ONT #2105 (EMD SD75I)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD70I and SD75I drawings
- Cab sub-base door proportions (right side)
- Added cab side seam (late CN/ONT version only)
- EMD SD70I and SD75I drawings
2022-12-09
- Revised in Drawings/1:18 Undecorated section:
- GE C36-7 drawings (NW Phase 2e version)
- Added extra hood and end grabirons
- GE C36-7 drawings (NW Phase 2e version)
- Added in Drawings/1:18 Painted section:
- NW #1719 (EMD SD45)
- NW #8530 (GE C36-7)
- Added in Lettering and Logos section:
- NW lettering
- ONT numbers and logo (as on SD75I)
2022-12-08
- Added in Lettering and Logos section:
- NW logos
- Font-matching sample image
2022-12-07
- Added in Drawings/1:18 Undecorated section:
- 8 EMD SD45 drawings (SP and SSW Phase 2a3 and 2b1 versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD45 drawings (SP Phase 1a3 version)
- Added hatch ahead of dynamic brake intake
- Fuel tank vent pipe
- EMD SD45 drawings (SP Phase 1a3 version)
- Added in Lettering and Logos section:
- NW numbering
2022-12-06
- Revised in Drawings/1:18 Painted section:
- CN #2501 (GE Dash 9-44CWL)
- CN #5512 (GMD SD60F)
- CN #5570 (GMD GP38-2(W))
- CN #9511 (GMD GP40-2L(W))
- Changed number font to Craft Gothic DemiBold
2022-12-05
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD45 drawings (SP Phase 1b2 versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD38, SD39, SD40, SD40A, SD45 and SDP45 drawings (Phase 2b1 and later versions with inner sand hoses)
- Added sand pipes running below walkway sideframe
- Removed dynamic brake roof vent (SP SD39 Phase 2b1 versions only)
- EMD SD38, SD39, SD40, SD40A, SD45 and SDP45 drawings (Phase 2b1 and later versions with inner sand hoses)
2022-12-04
- Added in Drawings/1:18 Painted section:
- CDAC #500 (EMD GP35R)
2022-12-03
- Added in Drawings/1:18 Painted section:
- CDAC #518 (EMD GP35R)
- Added in Lettering and Logos section:
- CDAC lettering
2022-12-02
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP35R drawings
2022-12-01
- Revised in Drawings/1:18 Undecorated section:
- All GE Super 7-23B and Super 7-30CMP drawings
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
- All GMD GP38-2(W), GP40-2(W), GP40-2L(W), SD40-2F, SD50F and SD60F drawings
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
- All GE Super 7-23B and Super 7-30CMP drawings
- Revised in Drawings/1:18 Painted section:
- CN #5512 (GMD SD60F)
- CN #5570 (GMD GP38-2(W))
- CN #9511 (GMD GP40-2L(W))
- CMQ #9017 (GMD SD40-2F)
- CMQ #9020 (GMD SD40-2F)
- CP #9009 (GMD SD40-2F)
- DMVW #5454 (GMD SD50F)
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2022-11-30
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD38-2 drawings (SP version)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-3 drawings (NS versions)
- EMD GP39-2 drawings (MKT version)
- All EMD GP39X and GP50 drawings
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct (Phase 1 versions)
- Horn manifold and back cap dimensions (versions with Leslie horns)
- Changed horn from Leslie S-3K to Prime PM-990 (late BN versions only)
- Added in Drawings/1:18 Painted section:
- SLQ #8748 (EMD GP11)
- Revised in Drawings/1:18 Painted section:
- AA #2373 (EMD GP39-2)
- BN #3118 (EMD GP50)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions (AA #2373)
- Changed horn from Leslie S-3K to Prime PM-990 (BN #3118)
- Added in Lettering and Logos section:
- SLR logo and lettering
2022-11-29
- Added in Drawings/1:18 Undecorated section:
- 8 GE ES44AC drawings (CSXT Phase 2f and 2g versions)
- 6 GE ET44AC drawings (CSXT and NS versions)
- Revised in Drawings/1:18 Painted section:
- BNSF #7128 (GE ES44C4)
- Corner step height
- CREX #1328 (GE ES44AC)
- Added chain posts on end handrails
- Added seam on cab bottom front corner access panels
- BNSF #7128 (GE ES44C4)
2022-11-28
- Added in Drawings/1:18 Undecorated section:
- 6 GE ET44AC drawings (UP and late CN versions)
- 2 GE ET44C4 drawings (late BNSF version)
- Revised in Drawings/1:18 Undecorated section:
- GE ES series drawings (Phase 2a and later versions with standard-clearance steps)
- All GE ET44AC and ET44C4 drawings
- Corner step height
- Center hood bolt height (ET44AC and ET44C4 only)
- All GE ES and ET series left-side views
- Added AEI tag above left rear truck
- GE ES series drawings (CN, CSXT, CREX, IAIS and NS versions)
- Added seam on cab bottom front corner access panels
- Added chain posts on end handrails (CREX, CSXT and IAIS versions)
- Removed chain posts on end handrails (NS ES40DC versions only)
- Corrected straight vs. angled end handrail stanchions (CSXT and IAIS versions; NS ES44AC right-side views)
2022-11-26
- Added in Drawings/1:18 Painted section:
- AMTK #802 (GE P40DC)
- Added in Photos section:
- 3 photos from 2002-07-15
- 3 photos from 2002-07-16
- Revised in Locomotive Descriptions and Phases section:
- ALCO/MLW FA series Phases
- Added sample illustrations
- ALCO/MLW FA series Phases
2022-11-25
- Added in Drawings/1:18 Undecorated section:
- 2 GE P40DC drawings
- 4 GE P42DC drawings
- Added in Photos section:
- 22 photos from 2022-11-24 (CP Holiday Train)
2022-11-20
- Added in Drawings/1:18 Undecorated section:
- 8 EMD SD45T-2 drawings
2022-11-18
- Revised in Drawings/1:18 Undecorated section:
- All EMD F59PH drawings
- All GMD F40PH-2D drawings
- Coupler cut lever and pilot details
- Corner handrail bolts
- All GE 6-axle Dash 8 series drawings
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions (versions with Leslie horns)
- Cab door window height (versions with wide-nosed cab)
- GE ES44AC drawings (UP Phase 1f and 2b versions)
- Added capacitor box (on walkway behind inverter cabinet)
- Revised in Drawings/1:18 Painted section:
- AMT #526 (EMD F59PH)
- GOT #522 (EMD F59PH)
- VIA #6407 (GMD F40PH-2D)
- VIA #6438 (GMD F40PH-2D)
- Coupler cut lever and pilot details
- Corner handrail bolts
2022-11-17
- Revised in Drawings/1:18 Undecorated section:
- All EMD F59PHI drawings
- Coupler cut levers
- Corner handrail bolts
- All EMD GP8, GP10 and GP11 drawings
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Corner step height increased by 2"
- Revised coupler carrier
- Changed draft gear housing from M-375/MS-485 to M-380/M-381 (most GP10 and GP11 drawings, except most GP7 rebuilds)
- Revised draft gear housing (most GP7 rebuilds)
- Horn manifold and back cap dimensions (CR and CRR version only)
- All EMD F59PHI drawings
- Revised in Drawings/1:18 Painted section:
- AMT #1325 (EMD F59PHI)
- Coupler cut levers
- AMTK #505 (GE Dash 8-32BWH)
- CDTX #2052 (GE Dash 8-32BWH)
- NS #3533 (GE Dash 8-32B)
- PW #3902 (GE B39-8)
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- ICG #7918 (EMD GP8)
- ICG #8719 (EMD GP11)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Corner step height increased by 2"
- Revised coupler carrier
- Changed draft gear housing from M-375/MS-485 to M-380/M-381 (ICG #8719 only)
- Revised draft gear housing (ICG #7918 only)
- AMT #1325 (EMD F59PHI)
- Revised in Locomotive Descriptions and Phases section:
- EMD/GMD GP7, GP9 Phases
- Updated details regarding overall length and draft gear design
- Added references
- EMD/GMD GP7, GP9 Phases
2022-11-15
- Revised in Drawings/1:18 Undecorated section:
- EMD GP9 drawings
- EMD GP18 drawings (IC, LV and SAL versions)
- EMD GP20 drawings (except UP version)
- Changed draft gear housing from M-375/MS-485 to M-380/M-381
2022-11-14
- Revised in Drawings/1:18 Undecorated section:
- All GE 4-axle Dash 8 series drawings
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions (versions with Leslie horns)
- Cab door window height (Dash 8-40BW only)
- GE AC4400CW drawings (Phase 1f through 2c CP versions; Phase 2c CEFX version)
- Narrower steps
- Added step light behind battery boxes (right side)
- All GE 4-axle Dash 8 series drawings
- Added in Drawings/1:18 Painted section:
- CP #8529 (GE AC4400CW)
- Added in Lettering and Logos section:
- CP lettering (versions from GP9u #8200 and AC4400CW #8529)
- GE builder's and emissions control stickers
2022-11-13
- Revised in Drawings/1:18 Undecorated section:
- All GE ES40DC and ES44DC drawings
- Cab door window height (except CN versions)
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added numberboard latches (early BNSF versions)
- Added numberboard seam (CN and late BNSF versions)
- All GE ES40DC and ES44DC drawings
- Revised in Drawings/1:18 Painted section:
- BNSF #7128 (GE ES44C4)
- CREX #1328 (GE ES44AC)
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab door grabiron height (CREX #1328 only)
2022-11-12
- Added in Drawings/1:18 Undecorated section:
- 2 GE ES44AC drawings (UP Phase 1f1 version) - completed in 2020 but never uploaded
- Revised in Drawings/1:18 Undecorated section:
- All GE Dash 9 series drawings
- Cab door window height (except Dash 9-40C and CN versions)
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height (NS versions)
- Added numberboard seam (CN versions)
- Horn manifold and back cap dimensions (versions with Leslie horns)
- All GE ES44AC, ES44C4, ET44AC and ET44C4 drawings
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Added missing truck brake piping (left side)
- Cab door grabiron height (CREX versions only)
- Narrower steps (CN versions only)
- All covered hopper car drawings
- All tank car drawings
- All well car drawings
- Coupler cut levers
- All GE Dash 9 series drawings
- Revised in Drawings/1:18 Painted section:
- BNSF #5601 (GE AC4400CW)
- CEFX #1043 (GE AC4400CW)
- CN #2501 (GE Dash 9-44CWL)
- Cab door window height (CEFX #1043 only)
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- CR #5002 (GE B36-7)
- SCL #5134 (GE BQ23-7)
- SLSF #867 (GE B30-7)
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets (SLSF #867 only)
- Horn manifold and back cap dimensions
- APA #97 (MLW C-424)
- CP #4257 (MLW C-424)
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved rearward by 0.5"
- Front/rear hood ends moved inward by 0.25"
- Hood length reduced by 0.75" (length removed in 4 doors under exhaust stack)
- Coupler cut lever thickness and height
- FBOX #505314
- SHPX #432930
- Coupler cut levers
- Truck springs
2022-11-11
- Revised in Drawings/1:18 Undecorated section:
- All GE AC44C4M, AC44C6M and AC4400CW drawings
- Cab door window height
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Step height (late AC44C6M, CSXT AC4400CW only)
- Added numberboard seam (AC44C6M)
- Removed numberboard hinges (UP Phase 1g2 and later AC4400CW)
- Horn manifold and back cap dimensions (versions with Leslie horns)
- All GE AC44C4M, AC44C6M and AC4400CW drawings
2022-11-09
- Revised in Drawings/1:18 Undecorated section:
- All GMD SD40 drawings
- Removed walkway side frame seam near step wells
- All GMD SD40 drawings
- Added in Drawings/1:18 Painted section:
- QGRY #3327 (GMD SD40-3)
- Revised in Drawings/1:18 Painted section:
- CBNS #3366 (EMD SD40-2)
- SLR #3008 (EMD GP40-2)
- Changed cab door from recessed to surface-mounted
- Added in Lettering and Logos section:
- G&W (SLR) logo (version from SLR (LLPX) 3207)
2022-11-08
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD40 drawings (SP Phase 2a3 version)
- 8 EMD SD40-2 drawings (NDeM versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 (SP / SSW Phase 2b version)
- EMD GP40, SD39, SD40 and SD45 drawings (SSW and SP versions)
- Fuel filler
- EMD SD38-2 drawing (SLSF 298-299 left-side view)
- Corrected line glitch on walkway behind cab
- EMD SD40-2 drawings (CNW Phase 1a left-side views)
- Removed rear footboards
- Added in Lettering and Logos section:
- G&W railroad logos
- HCRY
- QGRY (3 variations)
- SLR (version from 3804)
- G&W railroad logos
2022-11-07
- Added in Drawings/1:18 Undecorated section:
- 2 GMD SD40 drawings (NDeM version)
- Revised in Drawings/1:18 Undecorated section:
- GMD SD40 drawings (CN versions)
- Added missing grabiron ahead of right-side battery box
- GMD SD40 drawings (CN versions)
2022-11-06
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD40 drawings (NDeM versions)
- 4 GMD SD40 drawings (CP versions)
- Added in Photos section: (George Matheson photos)
- 20 photos from 1997-08
2022-11-01
- Added in Photos section: (George Matheson photos)
- 8 photos from 1997-07
2022-10-26
- Revised in Photos section:
- Re-processed photos from 2008 (adjusted exposure and cropped as needed)
- 2008-07-19 through 2008-11-05
- Re-processed photos from 2008 (adjusted exposure and cropped as needed)
2022-10-24
- Revised in Photos section:
- Re-processed photos from 2008 (adjusted exposure and cropped as needed)
- 2008-07-04 (CN)
- 2008-07-05
- Re-processed photos from 2008 (adjusted exposure and cropped as needed)
2022-10-22
- Added in Photos section:
- 2 photos from 2008-04-09 (MMA)
- Revised in Photos section:
- Re-processed photos from 2008 (adjusted exposure and cropped as needed)
- 2008-04-01
- 2008-04-02
- 2008-04-03
- 2008-04-06
- 2008-05-20
- 2008-05-29
- 2008-07-01
- 2008-07-02 (CN)
- 2008-07-03
- Re-processed photos from 2008 (adjusted exposure and cropped as needed)
2022-10-21
- Added in Drawings/1:18 Undecorated section:
- 2 Trinity 5125 cu-ft pressure-differential hopper drawings
2022-10-19
- Added in Drawings/1:18 Undecorated section:
- 4 Thrall 5165 cu-ft pressure-differential hopper drawings
- Revised in Photos section:
- Re-processed photos from 2008-07-02, CP (adjusted exposure and cropped as needed)
2022-10-14
- Revised in Drawings/1:18 Undecorated section:
- All MLW M-630 and M-636 drawings
- Coupler cut levers
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved forward by 0.25"
- Front/rear hood ends moved outward by 0.5"
- Added missing cab flag bracket (right side)
- Rear headlight details (right side)
- Added bottom seam on hood ends
- All MLW M-630 and M-636 drawings
2022-10-07
- Added in Photos section: (George Matheson photos)
- 16 photos from 1997
2022-09-28
- Added in Photos section: (George Matheson photos)
- 30 photos from 1997
2022-09-27
- Added in Photos section: (George Matheson photos)
- 59 photos from 1998
2022-09-26
- Added in Photos section: (George Matheson photos)
- 111 photos from 1998
2022-09-20
- Added in Photos section: (George Matheson photos)
- 37 photos from 1999
- 66 photos from 2000
- 76 photos from 2001
- 50 photos from 2002
- 38 photos from 2003
- 24 photos from 2004
- 55 photos from 2005
2022-09-19
- Major update to Photos section
- Revised page structure and filters to include photos taken by George Matheson
- Changed filters from text links to radio buttons
- Removed unnecessary "Other Search Options" links from basic photo search pages
- Added in Photos section: (George Matheson photos)
- 70 photos from 2006
- 16 photos from 2007
- 8 photos from 2008
2022-08-03
- Revised in Drawings/1:18 Undecorated section:
- All C30-7, C30-7A and C36-7 drawings
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets (Phase 1a through 2a versions)
- Horn manifold and back cap dimensions (versions with Leslie horns)
- Changed horn from Leslie S-3K to Prime PM-990 (BN versions only)
- All C30-7, C30-7A and C36-7 drawings
2022-08-02
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD50 drawings
- Coupler cut levers
- Corner handrail end plate attachment points
- All B23-7, B30-7, B30-7A, B36-7 and BQ23-7 drawings
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets (Phase 1a through 2c versions)
- Horn manifold and back cap dimensions (versions with Leslie horns)
- Changed horn from Leslie SL-3L to Prime PM-920 (MP versions only)
- Removed extra cab side windows (CO and SOU Phase 3 versions)
- All EMD SD50 drawings
2022-07-13
- Revised in Locomotive Descriptions and Phases section:
- EMD SD70, SD75 series
- EMD SD70MAC
- EMD SD70M-2, SD70ACe
- Revised HTCR truck descriptions (axle shock strut locations)
2022-07-12
- Revised in Drawings/1:18 Undecorated section:
- EMD SD75I and SD70MAC drawings (versions with late HTCR trucks)
- Axle shock strut locations
- EMD SD75I and SD70MAC drawings (versions with late HTCR trucks)
2022-07-04
- Added in Photos section:
- 66 photos from 2022-06-27
2022-06-18
- Added in Photos section:
- 37 photos from 2022-05-24
- 38 photos from 2022-06-17
2022-05-13
- Updated in Colours section
- BNSF orange (changed to RGB values actually used in the drawings)
2022-04-18
- Added in Drawings/1:18 Undecorated section:
- 2 NSC 66' 3675 cu-ft gondola drawings
- Revised in Drawings/1:18 Undecorated section:
- NSC 6400 cu-ft gondola drawings
- Uncoupling levers
- Brake system dimensions and details
- Handbrake crank
- Jacking pads and underframe seams
- Lower ride height over trucks
- Added defect card holder (right side)
- NSC 6400 cu-ft gondola drawings
2022-04-12
- Added in Drawings/1:18 Undecorated section:
- 6 Gunderson 6269 cu-ft boxcar drawings
2022-04-07
- Revised in Drawings/1:18 Undecorated section:
- All boxcar drawings
- Coupler cut levers
- All boxcar drawings
2022-04-02
- Revised in Locomotive Descriptions and Phases section:
- EMD SD70, SD75 series
- Converted phases to tabular format
- Slightly revised sub-phase letters
- Added model history, description and references
- EMD SD70, SD75 series
2022-03-31
- Shortened breadcrumb navigation and removed it from high-level pages
2022-03-30
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD70, SD70I, SD75I, SD70MAC, SD70M-2 and SD70ACe drawings
- Coupler cut levers
- Corner handrail end plate attachment points
- All EMD SD70, SD70I, SD75I, SD70MAC, SD70M-2 and SD70ACe drawings
- Revised in Drawings/1:18 Painted section:
- KCS #4040 (EMD SD70ACe)
- UP #8424 (EMD SD70ACe)
- Coupler cut levers
- Corner handrail end plate attachment points
- DWP #5904 (EMD SD40)
- SLSF #923 (EMD SD45)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions (SLSF #923 only)
- DWP #3600 (ALCO RS-11)
- Coupler cut lever and pilot end handrail
2022-03-29
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD39 and SD39 drawings
- EMD SD40, SD40A, SD45 and SDP45 drawings (Phase 2 versions)
- All GMD SD40 and SD40-2 drawings
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions (versions with Leslie horns)
2022-03-26
- Updated Links section
- Added numerous pages I frequently visit but neglected to include previously
- Simplified link text (linking from title instead printed URL)
2022-03-23
- Revised in Drawings/1:18 Undecorated section:
- All ALCO RS-11 and RS-36 drawings
- All MLW RS-10, RS-18 and RSC-14 drawings
- Coupler cut lever and pilot end handrail
- Horn manifold and back cap dimensions (NYC, PRR and SAL RS-11 versions)
2022-03-21
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP9, GP18 and GP20 drawings
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Corner step height increased by 2" (except GN GP20 versions)
- Footboard height increased by 1.25" (except GN GP20 versions)
- Revised coupler carrier / draft gear
- Horn manifold and back cap dimensions (versions with Leslie horns)
- All EMD SD35 and SD40X drawings
- EMD SD40 and SD45 drawings (Phase 1 versions)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions (versions with Leslie horns)
- All six-axle GE Universal series drawings
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions (versions with Leslie horns)
- All EMD GP9, GP18 and GP20 drawings
2022-03-20
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD45-2 drawings (ATSF 5705-5714)
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD38-2 and SD45-2 drawings
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-5T to Nathan P3 (LN SD38-2 only)
- All EMD SD38-2 and SD45-2 drawings
- Revised in Drawings/1:18 Painted section:
- BN #8004 (EMD SD40-2)
- BNSF #8010 (EMD SD40-2)
- CBNS #3366 (EMD SD40-2)
- CN #5250 (GMD SD40-2(W))
- CR #6381 (EMD SD40-2)
- LN #8158 (EMD SD40-2)
- MKT #621 (EMD SD40-2)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct (left side views)
- Horn manifold and back cap dimensions (versions with Leslie horns)
- Changed horn from Leslie S-3K to Prime PM-990 (BN #8004 only)
2022-03-19
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 drawings (all except ATSF, BN, BO, MKT and MP versions)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
- Horn manifold and back cap dimensions (versions with Leslie horns)
- All GMD SD40-2(W) drawings
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- EMD SD40-2 drawings (all except ATSF, BN, BO, MKT and MP versions)
2022-03-18
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 drawings (BN, BO, MKT and MP versions)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
- Horn manifold and back cap dimensions (MKT versions only)
- Changed horn from Leslie S-3K to Prime PM-990 (BN versions only)
- Changed horn from Leslie SL-3L to Prime PM-920 (MP versions only)
- EMD SD40-2 drawings (BN, BO, MKT and MP versions)
2022-03-17
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 drawings (ATSF versions)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
- Horn manifold and back cap dimensions
- EMD SD40-2 drawings (ATSF versions)
2022-03-16
- Added in Locomotive Descriptions and Phases section:
- ALCO/MLW FA series
2022-03-15
- Revised in Drawings/1:18 Undecorated section:
- EMD GP30 drawings (versions with Leslie horns)
- GE 4-axle Universal series drawings (versions with Leslie horns)
- Horn manifold and back cap dimensions
- All MLW M-420 drawings
- Coupler cut lever thickness and height
2022-03-13
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO PA-1 drawings (LV version)
2022-03-12
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO PA-2 drawings (NYC versions)
2022-03-11
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO PA-1 drawings (NH and NYC versions)
2022-03-10
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO FA-2 drawings (PRR versions)
2022-03-09
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO PB-1 drawings (ATSF version)
2022-03-08
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO FA-1 drawings (generic version)
- 4 ALCO FA-2 drawings (BO versions)
- 2 ALCO FB-1 drawings (generic version)
- 4 ALCO FB-2 drawings (generic versions)
- 2 ALCO PA-1 drawings (ATSF version)
2022-03-04
- Revised in Drawings/1:18 Undecorated section:
- ALCO C-425 drawings (except NH version)
- All ALCO C-430 drawings
- All MLW C-424 drawings
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved rearward by 0.5"
- Front/rear hood ends moved inward by 0.25"
- Hood length reduced by 0.75" (length removed in 4 doors under exhaust stack)
- Coupler cut lever thickness and height
- Added pilot grabirons (except EL C-425, RDG C-430 and MLW C-424)
- Horn manifold and back cap dimensions (except NW C-425 and MLW C-424)
2022-03-03
- Revised in Drawings/1:18 Undecorated section:
- ALCO C-424 drawings (BRC versions)
- ALCO C-425 drawings (NH version)
- Redrawn cab face (revised dimensions and nose/roof contours)
- Cab sides moved rearward by 0.5"
- Front/rear hood ends moved inward by 0.25"
- Hood length reduced by 0.75" (length removed in 4 doors under exhaust stack)
- Coupler cut lever thickness and height
- Added pilot grabirons (C-424 only)
- Horn manifold and back cap dimensions (C-425 only)
- EMD GP38-2 and GP40-2 drawings (versions with Leslie horns)
- EMD GP38-3 drawings (FWWR 2004-2005)
- Horn manifold and back cap dimensions
- Revised in Drawings/1:18 Painted section:
- BO #1977 (EMD GP40-2)
- CR #1630 (EMD GP15-1)
- CR #3400 (EMD GP40-2)
- SLR #3008 (EMD GP40-2)
- Horn manifold and back cap dimensions
2022-03-02
- Revised in Drawings/1:18 Undecorated section:
- EMD GP28, GP35, GP38, GP38AC and GP40 drawings (versions with Leslie horns)
- EMD GP15-1 drawings (CNW, CR and SLSF versions)
- EMD GP39-2 drawings (ATSF and BN versions)
- Horn manifold and back cap dimensions
- EMD GP15-1 and GP15AC drawings (MP versions)
- Changed horn from Leslie S-3L-R to Prime PM-920
2022-03-01
- Revised in Drawings/1:18 Undecorated section:
- MLW FPA-4 and FPB-4 drawings
- Minor side ladder changes
- Carbody roof vent location (left side)
- Added bolts to end diaphragm (as-built versions only)
- Headlight casing and nose door (FPA-4 only)
- MLW FPA-4 and FPB-4 drawings
2022-02-18
- Revised in Drawings/1:18 Undecorated section:
- MLW FPA-4 and FPB-4 drawings
- Increased bottom of underframe height
- Relocated and revised traction motor cable brackets
- Lowered side grills and upper carbody panels
- Adjusted cab, window and nose proportions
- Roof hatch positions
- MLW FPA-4 and FPB-4 drawings
- Revised in Locomotive Dimensions and Measurements section:
- MLW FPA-4 dimensions
- Added additional dimensions taken from ALCO mechanical drawings
- MLW FPA-4 dimensions
2022-02-12
- Added in Photos section:
- 16 photos from 2019-06-21 (Elgin County Railway Museum)
- 2 photos from 2020-06-02
2022-02-11
- Added in Drawings/1:18 Undecorated section:
- 8 GE U30B drawings (NW versions)
2022-02-10
- Added in Drawings/1:18 Undecorated section:
- 2 GE U30B drawings (SAL version)
- 4 GE U28B drawings (CBQ and NW versions)
2022-02-08
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-3 drawings (FWWR versions)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape (except FWWR #2005-2006)
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts (except FWWR #2005-2006)
- All EMD GP15-1, GP15AC and GP15T drawings
- EMD GP38-2 and GP40-2 drawings (all Phase 2-3 versions)
- EMD GP39-2 drawings (except MKT version)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct (except CNW and SLSF GP15-1 variations, and SOO GP38-2 #4451-4452)
- All GE 4-axle Universal series drawings
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Added missing rear flag bracket (some CO, LN, NYC and PC variations)
- Revised dynamic brake grids (Phase 1b through 2b3 versions only)
- EMD GP38-3 drawings (FWWR versions)
- Revised in Drawings/1:18 Painted section:
- BO #1977 (EMD GP40-2)
- BO #4331 (EMD GP40-2)
- CR #1630 (EMD GP15-1)
- CR #3400 (EMD GP40-2)
- CSXT #1524 (EMD GP15T)
- DTI #224 (EMD GP38-2)
- DTI #6419 (EMD GP40-2)
- GTW #5836 (EMD GP38-2)
- SOO #4452 (EMD GP38-2)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct (left-side views)
- FWWR #2000 (EMD GP38-3)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #3 traction motor air duct
- CSXT #1896 (GE U18B)
- PICK #9508 (GE U18B)
- Coupler cut lever and pilot details
- Corner handrail and step bolts
2022-02-07
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP38 drawings (BO/CO end views)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2 and GP40-2 drawings (all Phase 1 versions)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct
- EMD GP38-2 and GP40-2 drawings (all Phase 1 versions)
2022-02-05
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP40 drawings (CBQ end views)
2022-02-04
- Added in Drawings/1:18 Undecorated section:
- 1 EMD GP40 drawing (BO Phase 1a3 end views)
- Revised in Drawings/1:18 Painted section:
- SLR #3008 (EMD GP40-2)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- SLR #3008 (EMD GP40-2)
- Revised in Locomotive Descriptions and Phases section:
- EMD/GMD GP28, GP35 Phases
- Added MU connector housing change (Phase 1b1)
- EMD GP38, GP39, GP40 Phases
- Added end view illustrations
- Added end handrail / coupler cut lever details
- EMD/GMD GP28, GP35 Phases
2022-02-03
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP40 drawings (BO late Phase 2b and 2c end views)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP40 drawings (BO late Phase 2b and 2c side views)
- Antenna and horn details
- EMD GP40 drawings (BO late Phase 2b and 2c side views)
2022-02-02
- Added in Drawings/1:18 Undecorated section:
- 1 EMD GP40 drawing (BO Phase 2b end views)
2022-01-31
- Revised in Drawings/1:18 Undecorated section:
- All EMD/GMD GP30 drawings
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts (versions with Blomberg trucks)
- Corrected minor transparency glitch with front truck traction motor air ducts (right side, versions with Blomberg trucks)
- All EMD/GMD GP30 drawings
- Revised in Drawings/1:18 Painted section:
- RI #342 (EMD GP40)
- SP #6640 (EMD GP35)
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape (SP #6640 only)
- Added missing portion of #2 traction motor air duct (SP #6640 only)
- Revised the Website Building page (minor revisions and additions)
- Added old vs. new 1:18 EMD GP40 drawing comparison in Drawing Accuracy page
2022-01-29
- Revised in Drawings/1:18 Undecorated section:
- All EMD/GMD GP28 and GP35 drawings
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts (Phase 1a-1d versions with Blomberg trucks)
- All EMD/GMD GP38, GP38AC and GP40 drawings
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct (Phase 2c-3 versions only)
- All EMD/GMD GP28 and GP35 drawings
2022-01-21
- Revised in Drawings/1:18 Undecorated section:
- Most EMD SD70ACe and SD70M-2 drawings
- Added missing portion of brake levers near brake cylinders (except versions with HTSC trucks)
- Corrected line glitch above cab nose door (right side)
- GE C39-8E (NS left-side view with Rockwell trucks)
- Corrected line glitch on speed recorder cable
- Most EMD SD70ACe and SD70M-2 drawings
- Revised in Drawings/1:18 Painted section:
- UP #8424 (EMD SD70ACe)
- Added missing portion of brake levers near brake cylinders
- UP #8424 (EMD SD70ACe)
2022-01-20
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD70 drawings (IC versions)
- 2 EMD SD70I drawings (CN version)
2022-01-18
- Added in Drawings/1:18 Undecorated section:
- 5 EMD SD75I drawings (CN versions)
- Revised in Drawings/1:18 Undecorated section:
- Most EMD SD70MAC drawings
- Access panels on bottom corners of nose (except BN Phase 1a version)
- Axle bearing adapters on trucks (except BN/BNSF Phase 1a through 1d versions)
- Added missing portion of brake levers near brake cylinders
- Most EMD SD70MAC drawings
2022-01-15
- Added in Drawings/1:18 Undecorated section:
- 6 EMD SD70MAC drawings (CR and CSXT versions)
2022-01-14
- Converted site from http to https
- Updated in Drawings section:
- Combined 1:28 and 1:14 drawings into a single page
- Combined 1:36 Road vehicles, Lineside Structures and Equipment into a single page; updated page code
2022-01-12
- Added in Drawings/1:18 Painted section:
- AMT #1325 (EMD F59PHI)
- Added in Lettering and Logos section:
- AMT logo and lettering (as on F59PHI)
2022-01-09
- Added in Drawings/1:18 Painted section:
- AMT #526 (EMD F59PH)
- Revised in Drawings/1:18 Undecorated section:
- All EMD F59PH and F59PHI drawings
- Carbody door and panel height
- All GE ES44AC, ES44C4, ET44AC and ET44C4 drawings
- Added numberboard latches (Phase 2b and earlier ES-series versions)
- Added numberboard seam (Phase 2c and later ES-series versions and ET series)
- Cab door window height (except CN, UP and some NS versions)
- Corrected line glitch on right front / left rear traction motor air duct (versions with Hi-Ad trucks only)
- Added missing sight glass under right side radiators (most Phase 2f-2g ES-series versions)
- Added EOT holder behind fuel tank (left side; CREX versions only)
- All EMD F59PH and F59PHI drawings
- Revised in Drawings/1:18 Painted section:
- CREX #1328 (GE ES44AC)
- Added numberboard seam
- Cab door window height
- Corrected line glitch on front-most traction motor air duct
- GOT #522 (EMD F59PH)
- Carbody door and panel height
- CREX #1328 (GE ES44AC)
- Added in Lettering and Logos section:
- AMT logo and lettering (as on F59PH)
2022-01-08
- Added in Drawings/1:18 Painted section:
- BNSF #7128 (GE ES44C4)
- Revised in Drawings/1:18 Painted section:
- BN #8004 (EMD SD40-2)
- Hood numbers
- BNSF #5601 (GE AC4400CW)
- Side stripe location
- Cab door window height
- VIA #6438 (GMD F40PH-2D)
- Revised "Green Choice" hood lettering
- BN #8004 (EMD SD40-2)
2022-01-07
- Added in Drawings/1:18 Painted section:
- SOO #4452 (EMD GP38-2)
2022-01-05
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP38-2 drawings (SOO Phase 2c and 3b versions)
- 2 EMD SD40-2 drawings (MP Phase 2b2 version) - completed in 2020 but not uploaded
- 7 GE Dash 9-44CW drawings (BNSF Phase 2g and 2h versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38AC drawings (SLSF left-side views)
- Corrected line glitch in sand hose ahead of fuel tank
- EMD GP38-2 drawings (PW right-side views)
- Changed air filter housing from early to late version
- EMD SD40-2 drawings (MP Phase 1c2, 2b1, 2b2 and 2c1 versions)
- Added end handrail chain
- GMD SD40-2 drawings (CP Phase 2d1 version)
- Corrected line glitch on winterization hatch
- GE AC4400CW drawings (BNSF, CEFX, KCS, SP and UP versions with cab-mounted numberboards)
- GE Dash 8-40BW drawings
- GE Dash 8-40CW and Dash 8-41CW drawings (ATSF versions)
- GE Dash 9-44CW drawings (ATSF, BNSF and SP versions)
- Added numberboard latches
- EMD GP38AC drawings (SLSF left-side views)
- Revised in Drawings/1:18 Painted section:
- BNSF #5601 (GE AC4400CW)
- Added numberboard latches
- BNSF #5601 (GE AC4400CW)
- Added in Lettering and Logos section:
- SOO logo and numbers
2022-01-04
- Added in Drawings/1:18 Undecorated section:
- 7 GE Dash 9-44CW drawings (BNSF Phase 2d2, 2e and 2f versions)
- Revised in Locomotive Descriptions and Phases section:
- All sections with phase detail illustrations
- Extended page body to full width to expand illustrations
- Converted from separate images to toggle image display
- EMD GP38, GP39, GP40 Phases
- Added Phase 2b illustration
- ALCO RS-11 Phases
- EMD SD28, SD35, SDP35, SD40X Phases
- EMD SD38, SD39, SD40, SD45 Phases
- Added phase detail illustrations
- All sections with phase detail illustrations
2022-01-03
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP8 drawings (Phase 4b version) - completed in 2014 but not uploaded
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP8, GP9, GP10, GP11, GP18 and GP20 drawings
- Larger roof lift rings
- Added lift rings around dynamic brakes
- Added lift rings on short hood (high short hood versions only)
- Removed grabiron behind rear fan (GP9 and GP18 only)
- Exhaust stacks (GP9 and GP18 only)
- All EMD GP8, GP9, GP10, GP11, GP18 and GP20 drawings
- Revised in Drawings/1:18 Painted section:
- ICG #8719 (EMD GP11)
- Larger roof lift rings
- ICG #8719 (EMD GP11)
- Revised in Locomotive Descriptions and Phases section:
- EMD/GMD GP7, GP9 Phases
- Added introductory text
- Converted phases to tabular format
- Refined EMD GP7 Phases to include sub-phases
- Added GMD GP9 phases
- EMD GP30 Phases
- EMD/GMD GP28, GP35 Phases
- Minor updates and additions to description text
- EMD/GMD GP7, GP9 Phases
- Added revision history for EMD GP8 drawings
2022-01-01
- Revised in Drawings/1:18 Painted section:
- APA #97 (MLW C-424)
- CP #4237 (MLW C-424)
- Revised hood lettering (APA #97 only)
- Hood roof panels and hinges
- DWP #3600 (MLW RS-11)
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Cab moved rearward by 0.5" and lengthened by 0.5"
- Battery box and short hood side doors/grabirons moved rearward by 0.25"
- Side handrail stanchion spacing
- Cab sub-base door and hinge spacing
- Pilot plate
- Corrected too-short latch on hood door under air intake/intercooler
- Hood roof panels, hinges and exhaust housing
Past Updates - 2021
2021-12-30
- Revised in Drawings/1:18 Undecorated section:
- All ALCO RS-11 and RS-36 drawings
- Hood roof panels, hinges and exhaust housing
- Removed extra bolt around radiator intakes (except Phase 1a RS-11)
- All ALCO C-424, C-425 and C-430 drawings
- All MLW C-424, M-630 and M-636 drawings
- Hood roof panels and hinges
- All ALCO RS-11 and RS-36 drawings
- Added revision history for ALCO C-424, C-425 and C-430, and MLW C-424
2021-12-29
- Revised in Drawings/1:18 Undecorated section:
- All MLW RS-10S, RS-18 and RSC-14 drawings
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Hood roof panels, hinges and exhaust housing
- Cab lengthened by 0.5"; moved rearward by 0.5" (RS-10S, PGE RS-18) or 0.25" (RS-18, RSC-14)
- Battery box and short hood side doors/grabirons moved rearward by 0.25" (RS-10S, PGE RS-18)
- Cab sub-base door and hinge spacing
- Cab sub-base door latch locations (PGE versions only)
- Footboards and pilot plate (except Phase 2c versions)
- Removed extra bolt around radiator intakes
- All MLW RS-10S, RS-18 and RSC-14 drawings
2021-08-01
- Revised in Drawings/1:18 Undecorated section:
- All ALCO RS-11 and RS-36 drawings
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Cab moved rearward by 0.5" and lengthened by 0.5"
- Battery box and short hood side doors/grabirons moved rearward by 0.25"
- Side handrail stanchion spacing
- Cab sub-base door and hinge spacing
- Footboards and pilot plate
- Corrected too-short latch on hood door under air intake/intercooler (left side only)
- All ALCO RS-11 and RS-36 drawings
2021-04-05
- Revised in Drawings/1:18 Undecorated section:
- GE C36-7 drawings (NW and NS Phase 2e and 2f left-side views)
- Added missing front classification lights
- GE C36-7 drawings (NW and NS Phase 2e and 2f left-side views)
2021-03-18
- Added in Photos section:
- 16 photos from 2021-03-11
- 31 photos from 2021-03-17
2021-03-08
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2, GP39-2 and GP50 drawings (most BN versions)
- Front classification and platform lights
- GE U30B drawings (Phase 1 right-side views)
- Added missing section of rear side handrail (mistakenly erased in previous update)
- EMD GP38-2, GP39-2 and GP50 drawings (most BN versions)
2021-03-02
- Changed links for drawings and photos to open in new tab
- Minor revisions to Drawing Accuracy, Drawing History and Site History pages
2021-03-01
- Renamed "Trainspotting Equipment" page to "Cameras and Hardware"
- Added "Hardware and Operating Systems" section in Creating the Drawings and Cameras and Hardware pages
2021-02-26
- Revised in Drawings/1:18 Undecorated section:
- EMD SD70MAC drawings
- Cab door (4 hinges instead of 3) (Phase 1c1 and earlier left-side views)
- Cab door (increased height and angled top corner) (Phase 1c2 and later right-side views)
- EMD SD70MAC drawings
2021-02-25
- Revised in Drawings/1:18 Undecorated section:
- GE four-axle Universal drawings (Phase 2b3 and earlier versions)
- Air intake screen
- GE four-axle Universal drawings (Phase 2b3 and earlier versions)
2021-02-23
- Revised in Drawings/1:18 Undecorated section:
- GE U30B drawings (LN Phase 1d version)
- Swapped headlight and Gyralite positions
- GE U30B drawings (LN Phase 1d version)
2021-02-20
- Revised in Locomotive Descriptions and Phases section:
- GE U28B Phases
- Converted to tabular format
- Added general model description
- Added phase dates
- Divided Phase 2 into three sub-phases
- GE U28B Phases
2021-02-18
- Added in Drawings/1:18 Undecorated section:
- 8 GE U30B drawings (ACL and NYC versions)
- Revised in Drawings/1:18 Undecorated section:
- GE U33B drawings (PC right-side views)
- Handbrake chain and brackets
- GE U33B drawings (PC right-side views)
2021-02-17
- Revised in Drawings/1:18 Undecorated section:
- GE U30B drawings (LN and WP Phase 1d right-side views)
- Water level sight glass
- GE four-axle Universal series left-side views
- Removed stray red pixel from left rear axle (mistakenly added in previous revisions)
- GE U30B drawings (LN and WP Phase 1d right-side views)
- Revised in Locomotive Descriptions and Phases section:
- GE U18B, U23B, U30B, U33B, U36B Phases
- Minor detail additions regarding brake chain pipe, water level sight glass and pilots
- GE U18B, U23B, U30B, U33B, U36B Phases
2021-02-15
- Added in Drawings/1:18 Undecorated section:
- 14 GE C30-7 drawings (FCP and NdeM versions)
- 4 GE C36-7 drawings (FCP and NdeM versions)
- Revised in Drawings/1:18 Undecorated section:
- GE C30-7 and C36-7 left-side views (BN Phase 2a and 2c versions; NW Phase 1c and 2c versions)
- Added missing rear class lights
- GE C30-7 right-side views (ATSF and BN versions)
- Added missing section of pipe for handbrake chain
- Added missing section of inner sand line brackets (under #3 and #4 axles) (ATSF Phase 2e right-side views only)
- GE C30-7 and C36-7 left-side views (BN Phase 2a and 2c versions; NW Phase 1c and 2c versions)
2021-02-14
- Added in Drawings/1:18 Undecorated section:
- 10 GE B23-7 drawings (NdeM versions)
- Revised in Drawings/1:18 Undecorated section:
- Most GE four-axle Universal and Dash 7 series right-side views
- Removed stray red pixel from right front axle (mistakenly added in yesterday's revisions)
- Most GE four-axle Universal and Dash 7 series right-side views
2021-02-13
- Added in Drawings/1:18 Undecorated section:
- 4 GE B30-7A drawings (BN versions; "B30-7AB")
- Revised in Drawings/1:18 Undecorated section:
- All GE Universal and Dash 7 series right-side views (except BQ23-7)
- Longer handrail stanchion in front of cab
- Four-axle Dash 7 units
- Added notch and square hole at top of bolted strip above door behind cab (Phase 3a and later right-side views)
- Revised seams under door behind cab (Phase 3a and later right-side views)
- Added drip rail over door behind cab (Phase 3b and later right-side views)
- Removed end fuel gauge from rear of fuel tank (CO left-side views)
- Relocated end fuel gauge from front to rear of tank (MP Phase 2d and 3 right-side views)
- Six-axle Dash 7 units (Phase 2c and later)
- Revised seams under door behind cab
- Added drip rail over door behind cab (Phase 2d and later)
- All GE Universal and Dash 7 series right-side views (except BQ23-7)
- Revised in Drawings/1:18 Painted section:
- CR #5002 (GE B36-7)
- Added notch and square hole at top of bolted strip above door behind cab
- Revised seams under door behind cab
- Added drip rail over door behind cab
- CSXT #1896 (GE U18B)
- Longer handrail stanchion in front of cab
- CR #5002 (GE B36-7)
- Revised in Locomotive Descriptions and Phases section:
- GE B23-7, B30-7, B30-7A, B36-7 Phases
- Split Phase 3a into Phase 3a and 3b (shifting previous 3b/3c to 3c/3d)
- GE C30-7, C30-7A, C36-7 Phases
- Split Phase 2c into Phase 2c and 2d (shifting previous 2d/2e to 2e/2f)
- GE B23-7, B30-7, B30-7A, B36-7 Phases
2021-02-12
- Added in Drawings/1:18 Undecorated section:
- 2 GE B30-7A drawings (SOU version)
- Revised in Drawings/1:18 Undecorated section:
- All GE six-axle Dash 7 series drawings
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side) (except NS Phase 2e C36-7)
- Rear headlight and numberboards (Phase 2a and later versions)
- Fuel filler (except ATSF Phase 2c-2d versions and NS Phase 2e version)
- Fuel filler cutout in side frame (ATSF Phase 2c versions)
- Changed bolted strip / front hood doors to later-phase version (Phase 2c versions)
- Removed 3rd side sill access hatch (NW Phase 2d C36-7 left-side view)
- Corrected sand line glitch behind front truck (ATSF Phase 2d right-side views)
- All GE six-axle Dash 7 series drawings
- Revised in Drawings/1:18 Painted section:
- CR #5002 (GE B36-7)
- Added sloped plate under frame behind draft gear
- Rear headlight and numberboards
- Fuel filler
- Added safety valve to front air reservoir
- Added underframe box / conduit behind top step
- SCL #5134 (GE BQ23-7)
- Pipe behind rear truck
- Added sloped plate under frame behind draft gear
- Fuel filler
- Small pipe clips above fuel tank
- SLSF #867 (GE B30-7)
- Pipe behind rear truck
- Added missing end transoms on trucks
- Fuel filler
- Added safety valve to front air reservoir
- CR #5002 (GE B36-7)
- Revised in Locomotive Descriptions and Phases section:
- GE C30-7, C30-7A, C36-7 Phases
- Moved bolted strip / front hood doors from Phase 2d to Phase 2c
- Moved raised rear headlight / numberboards from Phase 2b to Phase 2a (HTML table error)
- GE C30-7, C30-7A, C36-7 Phases
2021-02-11
- Added in Drawings/1:18 Undecorated section:
- 4 GE B32-7 drawings (SOU versions)
- 2 GE B36-7 drawings (SOU version)
- Revised in Drawings/1:18 Undecorated section:
- All GE four-axle Dash 7 series drawings
- Pipe behind rear truck (except Phase 3 versions)
- Added sloped plate under frame behind draft gear (except Phase 1a versions)
- Rear headlight and numberboards (Phase 2c and later versions)
- Added missing end transoms on trucks (versions with Type B trucks only)
- Fuel filler (except late ATSF versions)
- Added safety valve to front air reservoir (left side)
- Small pipe clips above fuel tank (right side) (LN, MP, PW, SCL and SLSF versions)
- Added underframe box / conduit behind top step (Phase 3c versions, BQ23-7 left-side view)
- All GE four-axle Dash 7 series drawings
- Revised in Locomotive Descriptions and Phases section:
- GE B23-7, B30-7, B30-7A, B36-7 Phases
- Split Phase 1a into Phase 1a through 1c
- Renamed original Phase 1b to Phase 1d
- Moved bolted strip / front hood doors from Phase 3b to Phase 3a
- Added dimensions for B30-7A1
- Added Family Lines / Seaboard and Southern railroad variations
- GE B23-7, B30-7, B30-7A, B36-7 Phases
2021-02-10
- Added in Drawings/1:18 Undecorated section:
- 2 GE Super 7-30CMP drawings
- Revised in Drawings/1:18 Undecorated section:
- EMD GP59 drawings
- Revised side handrail stanchions (forgotten in December 2020 update)
- EMD GP59 drawings
2021-02-09
- Added in Drawings/1:18 Undecorated section:
- 4 GE U23B drawings (SOU versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP26 drawings
- EMD GP30 drawings (GMO versions)
- EMD GP35 drawings (AA, GMO, SLSF and SOU versions with Type B trucks)
- Added missing end transoms on trucks
- All GE 4-axle Universal series drawings
- Air filter bracket and piping behind fuel tank (right side)
- Added sloped plate under frame behind draft gear
- Added missing section of angled pilot brace behind steps (except Phase 2h2 versions)
- Added missing end transoms on trucks (versions with Type B trucks only)
- GE U30C drawings (LN right-side views)
- Air reservoir piping behind fuel tank
- Revised in Drawings/1:18 Painted section:
- CSXT #1896 (GE U18B)
- PICK #9508 (GE U18B)
- Air filter bracket and piping behind fuel tank (right side) (CSXT #1896 only)
- Added sloped plate under frame behind draft gear
- Added missing section of angled pilot brace behind steps
2021-02-07
- Added in Drawings/1:18 Undecorated section:
- 3 GE U30B drawings
- LN Phase 1d version
- WP Phase 2b1 right-side view (previously combined with Phase 2b2 version)
- 3 GE U30B drawings
- Revised in Drawings/1:18 Undecorated section:
- GE U30B (WP Phase 2b1 left-side view)
- Relocated fuel cutoff switch
- GE U30B drawings (SLSF versions)
- Added inner sand lines
- Most GE 6-axle Universal series drawings (except BN versions)
- Fuel filler
- Higher footboards (U23C only)
- GE U30B (WP Phase 2b1 left-side view)
2021-02-06
- Added in Drawings/1:18 Undecorated section:
- 4 GE U30B drawings (CBQ Phase 2a version and WP Phase 1d version)
- Revised in Locomotive Descriptions and Phases section:
- GE U18B, U23B, U30B, U33B, U36B Phases
- GE U23C, U30C, U33C, U36C Phases
- Separated Phase 1c into Phase 1c and 1d (four-axle units only)
- Corrected description of horizontal radiator drip rail (previously listed as absent prior to Phase 2a)
- Corrected description of radiator/roof walkway transition in Phase 2a
2021-02-05
- Revised in Drawings/1:18 Undecorated section:
- Most GE 4-axle Universal series drawings
- Fuel filler (where not previously revised)
- Higher footboards (when present)
- Added radiator drip rail (SLSF and WP Phase 2b versions only)
- Most GE 4-axle Universal series drawings
2021-02-04
- Added in Drawings/1:18 Undecorated section:
- 2 GE U33B drawings (SCL Phase 2a version)
- 3 GE U30C drawings (BN Phase 2g1 through 2h2 right-side views, 5900 series)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40 (BO/CO Phase 1b2 left-side view)
- Walkway blower duct and side handrail jog position
- GE U33B drawings (SCL Phase 2b2 version)
- GE U36B (SCL Phase 2c right-side view)
- Added ATS shoe
- Relocated antenna (U33B only)
- GE U18B, U33B and U36B drawings (SCL versions)
- GE U30C and U33C drawings (BN versions)
- Fuel filler
- Higher footboards (U18B only)
- GE U30C drawings (BN Phase 2f and 2g1 versions with Locotrol)
- Added second air filter behind fuel tank (right side)
- EMD SD40 (BO/CO Phase 1b2 left-side view)
2021-02-03
- Added in Drawings/1:18 Undecorated section:
- 10 GE Super 7-23B drawings
- Revised in Drawings/1:18 Undecorated section:
- EMD GP20, GP40 and GP40-2 drawings (WP versions)
- GE U23B and U30B drawings (WP versions)
- Fuel filler
- Front end handrail bolt (U23B only)
2021-01-29
- Added in Drawings/1:18 Undecorated section:
- 2 GE C36-7 drawings (NS version)
- Revised in Drawings/1:18 Undecorated section:
- GE C30-7 and C36-7 drawings (NW Phase 1c and later right-side views)
- Added pipe in front of fuel tank
- GE C30-7 and C36-7 drawings (NW Phase 1c and later right-side views)
2021-01-28
- Revised in Drawings/1:18 Undecorated section:
- EMD SD60 (CR version left-side view)
- Corrected line glitch in speed recorder cable at axle
- GE C30-7 drawings (LN/SCL Phase 1c through 2c left-side views)
- Removed partial valve from air line behind front steps
- All GE B32-8, B39-8, C32-8, C39-8, Dash 8-32B and Dash 8-40B drawings
- Revised air reservoir height and brackets (this update was applied to Dash-7 units in November 2018; I had intended to revise Dash-8 units at the same time)
- Added missing section of bell (C32-8 and C39-8 right-side views)
- Revised dynamic brakes (B32-8 only)
- EMD SD60 (CR version left-side view)
2021-01-23
- Significantly altered / expanded Homepage descriptions and "About the Author" section in the Contact page
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP30 drawings (CO Phase 2a and 2b versions)
- Revised in Drawings/1:18 Undecorated section:
- GE B23-7 drawings (all Phase 1a versions)
- BE B30-7 drawings (CO Phase 1a version)
- Relocated fuel cutoff switch to within side sill
- GE B23-7 drawings (CR left-side views)
- GE B30-7 drawings (CO left-side views with Type B trucks)
- Added missing section of sand line nozzle on rear truck
- Revised in Locomotive Descriptions and Phases section:
- Renamed page to include "Descriptions"
- Separated phase listings for each builder into sub-categories based on locomotive series
- EMD GP30 Phases
- Converted to tabular format
- Added phase detail illustrations
- GE B23-7, B30-7, B30-7A, B36-7 Phases
- Added Phase 3c
- Added phase detail illustrations
- Added truck descriptions and illustrations
- GE C30-7, C30-7A, C36-7 Phases
- Added Phase 2e
- Added phase detail illustrations
- Added truck descriptions and illustrations
- Added railroad variation descriptions
2021-01-22
- Added in Locomotive Dimensions and Measurements section:
- MLW FPA-4 dimensions
- Revised in Drawings/1:18 Undecorated section:
- EMD SD60 drawings (EMDX version)
- Relocated horn
- EMD SD70MAC drawings (BN Phase 1a version)
- Added rear numberboards
- Added circular hatches on long hood top end
- EMD SD60 drawings (EMDX version)
2021-01-21
- Added in Drawings/1:18 Undecorated section:
- 4 MLW FPA-4 drawings
- 4 MLW FPB-4 drawings
2021-01-16
- Added acknowledgements in Drawings page
2021-01-13
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 drawings (Phase 2 versions)
- All EMD GP40X, SD35 and SD40X drawings
- Fuel tank height and gap from underframe
- Fuel tank vent pipe
- Handrail stanchions above fuel tank (left side)
- All EMD GP15D, GP20D, SD40A and SDP45 drawings
- Fuel tank height and gap from underframe
- Revised in Drawings/1:18 Painted section:
- CEFX #2040 (EMD GP20D)
- Fuel tank height and gap from underframe
- CEFX #2040 (EMD GP20D)
2021-01-12
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP39X, GP59 and GP60 series drawings
- EMD GP38-3 drawings (NS versions)
- EMD GP39-2 drawings (MKT version)
- Fuel tank height and gap from underframe
- All GE AC44C4M and AC44C6M drawings
- GE ES-series drawings (Phase 2e and 2f1 versions)
- Increased corner handrail thickness
- Revised end handrail stanchions
- GE ES-series drawings (Phase 2f2 and 2g versions)
- All GE ET44AC and ET44C4 drawings
- Increased corner and side handrail thickness
- Revised end handrail stanchions
- Revised in Drawings/1:18 Painted section:
- AA #2373 (EMD GP39-2)
- ATSF #143 (EMD GP60M)
- ATSF #345 (EMD GP60B)
- BN #3118 (EMD GP50)
- SP #9724 (EMD GP60)
- Fuel tank height and gap from underframe
- CREX #1328 (GE ES44AC)
- Increased corner and side handrail thickness
- Revised end handrail stanchions
2021-01-11
- Revised in Drawings/1:18 Undecorated section:
- All EMD F59PH, F59PHI, GP20C-ECO, GP50, SD70MAC and SD70ACe drawings
- All GMD F40PH-2D, GP38-2(W), GP40-2(W), GP40-2L(W), SD50F and SD60F drawings
- Fuel tank height and gap from underframe
- GMD F40PH-2D drawings (as-built versions)
- Fuel filler
- Revised in Drawings/1:18 Painted section:
- BN #8004 (EMD SD40-2)
- BNSF #8010 (EMD SD40-2)
- BO #1977 (EMD GP40-2)
- BO #4331 (EMD GP40-2)
- CBNS #3366 (EMD SD40-2)
- CMQ #9017 (GMD SD40-2F)
- CMQ #9020 (GMD SD40-2F)
- CN #5350 (GMD SD40-2(W))
- CN #5512 (GMD SD60F)
- CN #5570 (GMD GP38-2(W))
- CN #9511 (GMD GP40-2L(W))
- CP #9009 (GMD SD40-2F)
- CR #1630 (EMD GP15-1)
- CR #3400 (EMD GP40-2)
- CR #6381 (EMD SD40-2)
- CSXT #1524 (EMD GP15T)
- DMVW #5454 (GMD SD50F)
- DTI #224 (EMD GP38-2)
- DTI #6419 (EMD GP40-2)
- DWP #5904 (EMD SD40)
- GOT #522 (EMD F59PH)
- GTW #5836 (EMD GP38-2)
- KCS #4040 (EMD SD70ACe)
- LN #8158 (EMD SD40-2)
- MKT #621 (EMD SD40-2)
- RI #342 (EMD GP40)
- SLR #3008 (EMD GP40-2)
- SLSF #923 (EMD SD45)
- UP #8424 (EMD SD70ACe)
- VIA #6407 (GMD F40PH-2)
- VIA #6438 (GMD F40PH-2)
- Fuel tank height and gap from underframe
2021-01-10
- Revised in Drawings/1:18 Undecorated section:
- All EMD/GMD SD38, SD39, SD40, SD45, SD45-2 and SD50 drawings
- EMD SD60 drawings (CNW, CR and EMDX versions)
- Fuel tank height and gap from underframe
- All EMD SD60I and SD60M drawings
- EMD SD60 drawings (UP versions)
- Fuel tank length, height and gap from underframe
2021-01-09
- Revised in Drawings/1:18 Undecorated section:
- All EMD/GMD GP15 series, GP38 series, GP38-2, GP40, GP40-2, SD38-2, and SD40-2 series drawings
- Fuel tank height and gap from underframe
- All EMD/GMD GP15 series, GP38 series, GP38-2, GP40, GP40-2, SD38-2, and SD40-2 series drawings
2021-01-08
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2 drawings (most left-side views without inner sand lines)
- Air pipe vent valve (left front under walkway) (missed in December 2020 update)
- EMD GP38-2 drawings (most left-side views without inner sand lines)
2021-01-07
- Added in Drawings/1:18 Undecorated section:
- 9 GE U30B drawings (SLSF and WP Phase 2b1 through 2b3 versions)
2021-01-06
- Revised in Drawings/1:18 Undecorated section:
- GE ES-series drawings (Phase 2d2 and earlier versions)
- Increased corner handrail thickness
- Revised end handrail stanchions
- GE ES-series drawings (Phase 2d2 and earlier versions)
2021-01-05
- Revised in Drawings/1:18 Undecorated section:
- All GE 4-axle Dash 7 series drawings
- Increased corner handrail thickness
- All GE Dash 8 series drawings
- Increased corner handrail thickness
- Revised end handrail stanchions (units with wide-nosed cab and late versions with standard cab)
- Revised corner handrail location and attachments (units with wide-nosed cab only)
- All GE 4-axle Dash 7 series drawings
- Revised in Drawings/1:18 Painted section:
- CR #5002 (GE B36-7)
- CSXT #1896 (GE U18B)
- PICK #9508 (GE U18B)
- PW #3902 (GE B39-8)
- SCL #5134 (GE BQ23-7)
- SLSF #867 (GE B30-7)
- Increased corner handrail thickness
- AMTK #505 (GE Dash 8-32BWH)
- BNSF #5601 (GE AC4400CW)
- CDTX #2052 (GE Dash 8-32BWH)
- CEFX #1043 (GE AC4400CW)
- CN #2501 (GE Dash 9-44CWL)
- NS #3533 (GE Dash 8-32B)
- Increased corner handrail thickness
- Revised end handrail stanchions
- Revised corner handrail location and attachments (AMTK #505 and CDTX #2052 only)
- Added revision history for GE Dash 8 series drawings
2021-01-04
- Revised in Drawings/1:18 Undecorated section:
- All GE 6-axle Dash 7 series drawings
- Increased corner handrail thickness
- All GE AC4400CW and Dash 9 series drawings
- Increased corner handrail thickness
- Revised end handrail stanchions
- Added / revised X-panels in front hood section (Phase 1a through 1d Dash 9 units only)
- GMD GP35 drawings (CN version)
- Changed rear pilot from rock deflector to footboards
- Removed front pilot grabiron
- GMD GP35 drawings (CP versions)
- Removed pilot grabirons
- All GE 6-axle Dash 7 series drawings
- Revised in Locomotive Phases section:
- GE Dash 9 series phases
- Added Phase 1e
- Divided Phase 2d into 2d1 and 2d2
- GE Dash 9 series phases
2021-01-02
- Revised in Drawings/1:18 Undecorated section:
- EMD GP30 and GP35 drawings (PRR right-side views)
- Corrected mismatched front right handrail
- EMD GP35, SD40 and SD45 drawings (PRR versions)
- Added MU connector on end handrails
- EMD GP30 and GP35 drawings (PRR right-side views)
Past Updates - 2020
2020-12-31
- Added in Drawings/1:18 Undecorated section:
- 7 GE U33B drawings (PC and SCL versions)
- Revised in Drawings/1:18 Undecorated section:
- All GE Universal series drawings
- Increased corner handrail thickness
- All GE Universal series drawings
2020-12-30
- Added in Drawings/1:18 Undecorated section:
- 9 SD70MAC drawings (BN versions; BNSF Phase 1e1 left-side view)
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD70MAC drawings
- Revised fuel tank height
- Added line representing top edge of fuel tank
- Added missing bolt on second handrail stanchion behind cab (left side)
- Wider right front / left rear inverter cabinet panels (except Phase 1g1-1g2 versions)
- Narrower spacing of walkway supports on blower duct (Phase 1d left-side view only)
- All EMD SD70MAC drawings
- Revised in Locomotive Phases section:
- EMD SD70MAC Phases
- Divided Phase 1c into 1c1 and 1c1
- Divided Phase 1e into 1e1 and 1e2
- Added details concerning fuel tank, inverter cabinet panels, air piping and blower duct walkway supports
- EMD SD70MAC Phases
2020-12-29
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40 drawings (CGW and LN Phase 1a3 left-side views)
- Front fuel tank support
- EMD SD40 (PRR 6040-6054 right-side view)
- Corrected mismatched front right handrail
- EMD SD40 drawings (CGW and LN Phase 1a3 left-side views)
2020-12-28
- Added in Drawings/1:18 Undecorated section:
- 15 EMD GP35 drawings (GMO Phase 2c version; SOU and WP versions)
- 2 EMD GP40 drawings (WP Phase 1a3 version)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP30 drawings (SOU Phase 2b version)
- MU connector housing
- EMD GP35 drawings (AA, GMO and SLSF left-side views with Type B trucks)
- Brake chain bracket
- EMD GP35 drawings (AA and GMO versions)
- Added pole pockets near steps
- EMD SD35 drawings (SOU version)
- Removed cab awning and flag bracket
- Relocated front left walkway light
- Added speed recorder
- Added ATS shoes
- EMD GP30 drawings (SOU Phase 2b version)
2020-12-26
- Added in Drawings/1:18 Undecorated section:
- 22 EMD SD40-2 drawings (MP versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 drawings (ICG version)
- Added raised rear uncoupling lever
- EMD SD60 drawings (left-side views)
- Corrected location of handrail attachment point to rear of cab
- EMD SD40-2 drawings (ICG version)
2020-12-22
- Revised in Drawings/1:18 Undecorated section:
- All GMD SD40-2F, SD50F and SD60F drawings
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Cab corners and sub-base doors
- Sand hoses
- All EMD SD45-2 drawings
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- All EMD SW1001, SD70ACe and SD70M-2 drawings
- Increased handrail thickness
- All GMD SD40-2F, SD50F and SD60F drawings
- Revised in Drawings/1:18 Painted section:
- CBNS #3366 (EMD SD40-2)
- CN #5250 (GMD SD40-2(W))
- [Combination of 2019 and 2020 sets of revisions from undecorated version]
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack (CN #5250 only)
- Corrected minor line glitch on latches on cab sub-base door and first engine room door (CN #5250 only)
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- CMQ #9017 (GMD SD40-2F)
- CMQ #9020 (GMD SD40-2F)
- CN #5512 (GMD SD60F)
- CP #9009 (GMD SD40-2F)
- DMVW #5454 (GMD SD50F)
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Cab corners and sub-base doors
- Sand hoses
- DWP #5904 (EMD SD40)
- [Combination of 2019 and 2020 sets of revisions from undecorated version]
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Added missing grabiron ahead of right-side battery box
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- SLSF #923 (EMD SD45)
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- KCS #4040 (EMD SD70ACe)
- UP #8424 (EMD SD70ACe)
- Removed angled brace behind end plates (UP #8424 only)
- Increased handrail thickness
- BNSF #5601 (GE AC4400CW)
- CEFX #1043 (GE AC4400CW)
- Added missing truck brake piping
- Added X-panel under central air intake
- Added sideframe holes below cab sub-base
- CR #5002 (GE B36-7)
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
- Revised horn
- SLSF #867 (GE B30-7)
- Revised horn
- Added revision history for EMD SD70ACe and SD70M-2 drawings
2020-12-21
- Revised in Drawings/1:18 Undecorated section:
- All EMD / GMD SD38, SD40, SD40A, SD45 and SDP45 drawings
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- All EMD / GMD SD38, SD40, SD40A, SD45 and SDP45 drawings
2020-12-20
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD38-2 drawings
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
- All EMD SD38-2 drawings
- Revised in Drawings/1:18 Painted section:
- AA #2373 (EMD GP39-2)
- ATSF #143 (EMD GP60M)
- ATSF #345 (EMD GP60B)
- Revised side handrail stanchions
- Increased handrail thickness
- Fuel tank vent pipe (increased diameter, revised fittings)
- Revised radiator and dynamic brake fan dimensions and spacing
- Increased metal sand pipe diameter (except AA #2373)
- BN #8004 (EMD SD40-2)
- BNSF #8010 (EMD SD40-2)
- CR #6381 (EMD SD40-2)
- LN #8158 (EMD SD40-2)
- MKT #621 (EMD SD40-2)
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors (except BN #8004 and BNSF #8010)
- Added missing line segment in traction motor cables above fuel filler (except BN #8004 and MKT #621)
- SP #9724 (EMD GP60)
- [Combination of 2019 and 2020 sets of revisions from undecorated version]
- Revised center hood door spacing
- Revised hood behind cab
- Increased height of bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
- Revised side handrail stanchions
- Increased handrail thickness
- Fuel tank vent pipe (increased diameter, revised fittings)
- Revised radiator and dynamic brake fan dimensions and spacing
2020-12-19
- Revised in Drawings/1:18 Undecorated section:
- All GMD SD40-2 drawings
- Revised side handrail stanchions
- Increased handrail thickness
- Corrected rear corner handrail length (Phase 1 right-side views only)
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Added missing line segment in traction motor cables above fuel filler (left side) (except CP Phase 2d1 version)
- All GMD SD40-2 drawings
2020-12-18
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 drawings (CNW, Family Lines, ICG, MKT, RI and SOU versions)
- All GMD SD40-2(W) drawings
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
- Corrected line glitch on rear of cab roof (SD40-2(W) as-built left-side views only)
- Corrected lift ring glitch ahead of dynamic brake fans (SD40-2(W) as-built right-side views only)
2020-12-17
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 drawings (ATSF, BN, BO, CR, NW and SLSF versions)
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (left front / right rear under walkway)
- Sand lines (larger pipe diameter, revised hoses)
- Adjusted height of center hinge of engine room doors
- Added missing line segment in traction motor cables above fuel filler (left side)
- Added missing section of smaller air filter (CR right-side views only)
- EMD SD40-2 drawings (ATSF, BN, BO, CR, NW and SLSF versions)
2020-12-16
- Revised in Drawings/1:18 Undecorated section:
- EMD GP26 drawings
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of bottom of hood doors
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Added missing rear cab door (right side)
- All EMD GP39-2 and GP39X drawings
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter (except MKT GP39-2)
- Air pipe vent valve (left front / right rear under walkway) (except MKT GP39-2)
- Moved 3rd stanchion from rear farther rearward (MKT GP39-2 only)
- EMD GP40X drawings
- Revised radiator fan spacing
- All EMD SD35 and SD40X drawings
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
- All EMD SD70MAC drawings
- Added missing bolts on outer secondary suspension blocks of HTCR trucks
- EMD GP26 drawings
2020-12-15
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP20C-ECO, GP59, GP60, GP60B and GP60M drawings
- Revised side handrail stanchions
- Increased handrail thickness
- Fuel tank vent pipe (increased diameter, revised fittings)
- Revised radiator and dynamic brake fan dimensions and spacing (except GP20C-ECO)
- Increased metal sand pipe diameter (except GP20C-ECO)
- All EMD GP20C-ECO, GP59, GP60, GP60B and GP60M drawings
2020-12-10
- Revised in Drawings/1:18 Undecorated section:
- EMD GP15D and GP20D drawings
- Increased height of bottom of hood doors and blower duct
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- EMD GP38-3 drawings (NS versions)
- All EMD GP50 and GP50L drawings
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter (except GP38-3)
- Air pipe vent valve (left front / right rear under walkway) (Phase 1 versions only)
- Moved 3rd stanchion from rear farther rearward (Phase 2 versions only)
- Corrected missing section from rear truck (ATSF Phase 2b left-side view only)
- EMD GP15D and GP20D drawings
- Revised in Drawings/1:18 Painted section:
- BN #3118 (EMD GP50)
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (right rear under walkway)
- CEFX #2040 (EMD GP20D)
- Increased height of bottom of hood doors
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- BN #3118 (EMD GP50)
2020-12-10
- Revised in Drawings/1:18 Undecorated section:
- All GMD GP38-2(W), GP40-2(W) and GP40-2L(W) drawings
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
- All GMD GP38-2(W), GP40-2(W) and GP40-2L(W) drawings
- Revised in Drawings/1:18 Painted section:
- CN #5570 (GMD GP38-2(W))
- CN #9511 (GMD GP40-2L(W))
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
- FWWR #2000 (EMD GP38-3)
- [Combination of 2019 and 2020 sets of revisions from undecorated version]
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Corrected minor line glitch on latches on first engine room door
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Added missing line in dynamic brake section
2020-12-09
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP38-2 drawings (PW versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP15-1, GP15AC and GP15T drawings
- Front end handrail stanchions moved inward (CR GP15-1 version only)
- Revised side handrail stanchions
- Increased handrail thickness
- Dynamic brake fan (GP15T only)
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
- EMD GP38-3 drawings (FWWR versions)
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Added missing line in dynamic brake section (except FWWR 2004-2005)
- Fuel tank vent pipe (increased diameter, revised fittings) (FWWR 2004-2005 only)
- Added missing pixel in left side frame above rear of fuel tank (FWWR 2004-2005 only)
- All GMD F40PH-2D drawings
- Side handrails (increased handrail thickness, revised placement)
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings) (as-built versions only)
- Revised size and location of side steps and doors
- All EMD GP15-1, GP15AC and GP15T drawings
- Revised in Drawings/1:18 Painted section:
- BO #1977 (EMD GP40-2)
- BO #4331 (EMD GP40-2)
- CSXT #1524 (EMD GP15-1)
- DTI #224 (EMD GP38-2)
- GTW #5836 (EMD GP38-2)
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter (BO #1977, BO #4331 and CSXT #1524 only)
- Air pipe vent valve (left front / right rear under walkway)
- CR #4300 (EMD GP40-2)
- DTI #6419 (EMD GP40-2)
- [Combination of 2019 and 2020 sets of revisions from undecorated versions]
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Fuel tank moved 2.5" rearward (CR #3400 only)
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Revised exhaust stack
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter (DTI #6419 only)
- Air pipe vent valve (right rear under walkway)
- CR #1630 (EMD GP15-1)
- [Combination of 2019 and 2020 sets of revisions from undecorated version]
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened by 1"
- Middle hood doors narrowed by 0.75"
- Increased height of bottom of hood doors
- Corrected seam at bottom corners of long hood
- Front end handrail stanchions moved inward
- Revised side handrail stanchions
- Increased handrail thickness
- Fuel tank vent pipe (increased diameter, revised fittings)
- Air pipe vent valve (right rear under walkway)
- VIA #6407 (GMD F40PH-2D)
- VIA #6438 (GMD F40PH-2D)
- Side handrails (increased handrail thickness, revised placement)
- Revised radiator and dynamic brake fan dimensions and spacing
- Revised size and location of side steps and doors
2020-12-08
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP38-2 drawings
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
- Front uncoupling lever (LV version)
- EMD SD60M drawings (UP versions)
- All EMD SD70MAC drawings
- Removed rear numberboards
- All EMD GP38-2 drawings
2020-12-07
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP40-2 drawings
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
- All EMD GP40-2 drawings
- Revised in Drawings/1:18 Painted section:
- GOT #522 (EMD F59PH)
- Increased handrail thickness
- Revised radiator and dynamic brake fans
- Increased fuel tank vent pipe diameter
- ICG #7918 (EMD GP8)
- Added pipe conduit behind cab on conductor's side
- Increased handrail thickness
- ICG #8719 (EMD GP11)
- Fewer bolts around radiator intake screens
- Increased handrail thickness
- RI #342 (EMD GP40)
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in side frame above rear of fuel tank
- SLR #3008 (EMD GP40-2)
- [Combination of 2019 and 2020 sets of revisions from undecorated versions]
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised handrail stanchion spacing (except Phase 2c units)
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank
- SP #6640 (EMD GP35)
- [Combination of 2019 and 2020 sets of revisions from undecorated versions]
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Added lift rings below radiator intakes
- Revised radiator and dynamic brake fans (48" fans)
- Increased handrail thickness
- GOT #522 (EMD F59PH)
2020-12-06
- Revised in Drawings/1:18 Undecorated section:
- All EMD / GMD GP28, GP30, GP30B, GP35 and GP40X drawings
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
- Removed end drop step and handrail chains (MP GP35 variations only)
- Corrected corner handrail length (GMD GP35 only)
- Removed dynamic brakes (CNW Phase 1a2 GP35 left-side view; MP Phase 1c GP35 right-side views)
- All EMD / GMD GP28, GP30, GP30B, GP35 and GP40X drawings
2020-12-05
- Added revision history for EMD GP8 and GP10 drawings
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP8, GP9, GP10, GP11, GP18 and GP20 drawings
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
- Fewer bolts around radiator intake screens (Phase 3a GP10 with hood from late GP9)
- All EMD SD50, SD60, SD60I and SD60M drawings
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
- All EMD GP8, GP9, GP10, GP11, GP18 and GP20 drawings
2020-12-04
- Revised in Drawings/1:18 Undecorated section:
- All EMD F59PH and F59PHI drawings
- Increased handrail thickness
- Revised radiator and dynamic brake fans (F59PH)
- Increased fuel tank vent pipe diameter (F59PH)
- All EMD / GMD GP38, GP38AC and GP40 drawings
- Revised side handrail stanchions (Phase 2c and 3 versions)
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Added missing pixel in left side frame above rear of fuel tank (except Phase 2c versions)
- All EMD F59PH and F59PHI drawings
2020-12-03
- Added in Drawings/1:18 Undecorated section:
- 15 EMD SD70MAC drawings (BNSF and TFM versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD50, SD60, SD60I and SD60M drawings
- Revised side handrail stanchions
- Increased handrail thickness
- Revised anticlimber supports (Phase 1d and later SD60M and SD60I)
- Revised radiator fan dimensions and spacing
- Changed radiator fans to later Q-type (Phase 2c and 2d SD60M and SD60I)
- Revised headlight housing (UP Phase 2b units)
- All EMD SD50, SD60, SD60I and SD60M drawings
- Added in Locomotive Phases section:
- EMD SD70MAC Phases
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD70MAC
2020-11-28
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD50 drawings
- Minor detail revisions to inertial air intake and angled seam behind cab
- All EMD SD60 drawings
- Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
- All EMD SD60M and SD60I drawings
- Revised cab / short hood proportions (moved front edge forward by 0.75"; increased total cab length by 1.5" on SD60M and 0.5" on SD60I)
- Shifted first engine room door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
- Revised rooftop access panels over engine compartment (UP Phase 1d version only)
- All EMD SD50 drawings
2020-11-25
- Added in Drawings/1:18 Undecorated section:
- 4 EMD F59PH drawings (late GOT versions)
- Revised in Drawings/1:18 Undecorated section:
- MLW M-420 drawings (CN 2500-2529 as-built version)
- Removed rear numberboards
- Removed rear wrap-around pilot
- MLW M-420 drawings (CN 2530-2559)
- Removed rear wrap-around pilot (as-built version only)
- Removed pollution collector tank behind fuel tank (as-modified versions only)
- MLW M-420 drawings (CN 2560-2579 as-built version)
- Added pollution collector tank behind fuel tank
- MLW M-420 drawings (CN 2500-2529 as-built version)
2020-11-24
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD60
- GMD SD40-2F
- Undecorated and painted intermodal containers and trailers
2020-11-23
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD45
- Revised tables displaying drawings (added borders separating groups by railroad or by model)
2020-11-21
- Added in Drawings/1:18 Undecorated section:
- 1 EMD F59PHI drawing (AMTK as-built left-side view)
- Added in Locomotive Dimensions and Measurements section:
- EMD F59PHI dimensions
2020-11-20
- Added in Drawings/1:18 Painted section:
- GOT #522 (EMD F59PH)
2020-11-19
- Added in Drawings/1:18 Undecorated section:
- 2 EMD F59PH drawings (early GOT version)
- 14 EMD F59PHI drawings (AMT, AMTK, CDTX, RNCX, SCAX, SDNX, SNDX and TRE versions)
2020-11-19
- Revised in Drawings/1:18 Undecorated section:
- GE B23-7 and BQ23-7 drawings (CR and SCL versions)
- GE B30-7 drawings (SLSF version)
- GE B36-7 drawings (CR versions)
- GE C30-7 drawings (CR version; some LN, NW and SCL versions)
- GE C36-7 drawings (CR version)
- Revised horn
2020-11-16
- Added in Drawings/1:18 Undecorated section:
- 4 ACF 5090 cu-ft boxcar drawings
- 6 ACF 5290 cu-ft boxcar drawings
- 4 ACF 5295 cu-ft boxcar drawings
2020-11-12
- Revised in Drawings/1:18 Undecorated section:
- All GMD F40PH-2D drawings
- Coupler cut levers
- Front pilot supports
- Air reservoir supports (left side)
- All GMD F40PH-2D drawings
- Revised in Drawings/1:18 Painted section:
- VIA #6407 (GMD F40PH-2D)
- VIA #6438 (GMD F40PH-2D)
- Coupler cut levers
- Front pilot supports
- Air reservoir supports (left side)
2020-11-11
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP39-2 drawings (ATSF Phase 2a1 through 2c1 versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2 (KCS Phase 2a2 left-side view)
- EMD GP40-2 drawings (CR, DTI, KCS, SLSF and WP Phase 2b1 and 2b2 versions)
- Removed batten strip from rear of dynamic brake hatch
2020-11-10
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP39-2 drawings (BN versions)
2020-11-09
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP38-2 drawings (BN Phase 2c version)
2020-11-07
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP20 drawings (WP version)
- 4 EMD SD45 drawings (CNW Phase 2b1 and RDG versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD45 right-side views (BN and SCL versions)
- Corrected sand line glitch near steps
- EMD SD45 drawings (CNW Phase 1b1 version)
- Added antenna
- EMD SD45 right-side views (BN and SCL versions)
2020-11-05
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD38 drawings (DTI versions)
- 6 EMD SD39 drawings (SP versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD38 and SD40 left-side views (versions with 4000-gallon fuel tank)
- Corrected line glitch in fuel filler
- EMD SD38 and SD40 left-side views (versions with 4000-gallon fuel tank)
2020-11-04
- Added in Drawings/1:18 Undecorated section:
- 8 ALCO RS-11 drawings (SP versions)
- 2 GE U23C drawings (PC version)
- Revised in Drawings/1:18 Undecorated section:
- ALCO RS-11 drawings (versions with 2-pane cab side window)
- Narrower cab side window
- ALCO RS-11 drawings (SAL and NW left-side views)
- Removed short hood doors
- ALCO RS-11 drawings (SAL version)
- Corrected minor line glitch in front sanding line (left side)
- Changed brake wheel from surface-mounted to recessed (right side)
- ALCO RS-11 drawings (versions with 2-pane cab side window)
- Added in Photos section:
- 30 photos from 2020-05-06
- 37 photos from 2020-05-13
- 84 photos from 2020-05-26
- 11 photos from 2020-05-31
2020-11-03
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO C-424 drawings (BRC versions)
- 2 ALCO RS-11 drawings (early PRR Phase 1a1 version)
2020-10-30
- Added in Drawings/1:18 Undecorated section:
- 4 GE C36-7 drawings (NW versions)
- Revised in Drawings/1:18 Undecorated section:
- GE C30-7A and C36-7 drawings (CR left-side views)
- Corrected minor line glitch in rear-most traction motor sensor cable
- GE C30-7A and C36-7 drawings (CR left-side views)
2020-10-29
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD60M drawings (UP Phase 1d versions)
- 4 GE C30-7 drawings (NW versions)
2020-10-26
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD60M drawings (UP Phase 2b versions)
2020-10-22
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 drawings (CR 6441-6482)
- Changed from Phase 2a3 to 2a4
- EMD SD40-2 drawings (CR 6441-6482)
2020-10-21
- Slightly revised site styles (reduced paragraph width to improve readability)
- Added in Drawings/1:18 Undecorated section:
- 10 GE AC4400CW drawings (CP Phase 1f through 2c versions)
2020-10-20
- Added revision history for GE AC4400CW drawings
- Added in Drawings/1:18 Undecorated section:
- 3 GE AC4400CW drawings (CP Phase 1a3/1a4 versions)
- Revised in Drawings/1:18 Undecorated section:
- All GE AC4400CW drawings
- Added sideframe holes below cab sub-base
- GE Dash 9-40C and Dash 9-40CW drawings (up to NS 9008)
- GE Dash 9-44CW drawings (Phase 1a through 2a1 versions)
- GE AC4400CW drawings (Phase 1a1 through 1c2 versions with Hi-Ad trucks)
- Revised truck brake piping
- Reversed orientation of truck brake hose (right-side views)
- GE AC4400CW left-side views (Phase 1d and later versions)
- Added missing truck brake piping (versions with Hi-Ad trucks)
- Added X-panel under central air intake (Phase 2a1 and later versions)
- GE AC4400CW left-side views (FXE/TFM and UP Phase 1g versions)
- Corrected handrail around inverter cabinet
- All GE AC4400CW drawings
- Revised in Locomotive Phases section:
- GE AC4400CW Phases
- Added truck brake lines (Phase 1c3 / 1d)
- GE Dash 9 series phases
- Separated Phase 2a into Phase 2a1 / 2a2 (truck brake lines)
- GE AC4400CW Phases
2020-10-17
- Revised in Drawings/1:18 Undecorated section:
- Removed 1 GE AC4400CW right-side view (duplicate drawing of SP Phase 1a3/1a4 version)
- Revised in Locomotive Phases section:
- GE AC4400CW Phases
- Reversed order of appearance of sloped door behind right-side radiator intake / revised traction motor cable brackets (Phase 1a3 / 1a4)
- GE AC4400CW Phases
2020-09-30
- Updated Contact page
- Added javascript bicycle, car and cat photos
2020-05-24
- Added in Drawings/1:18 Undecorated section:
- 2 GE ET44AC drawings (CN version)
- Revised in Drawings/1:18 Undecorated section:
- GE ES44AC drawings (CN right-side views)
- Moved cab mirror rearward
- GE ES44AC drawings (CN right-side views)
2020-05-23
- Added in Drawings/1:18 Undecorated section:
- 4 GE ET44AC drawings (GECX versions)
2020-05-20
- Revised in Drawings/1:18 Undecorated section:
- GE Dash 9-44CW left-side views (BNSF versions)
- Removed digital fuel display
- All GE ES44C4 and ET44C4 left-side views
- Minor correction to casting text on rear truck
- All GE ES44C4 and ET44C4 right-side views
- Revised fuel tank fittings
- GE Dash 9-44CW left-side views (BNSF versions)
2020-05-17
- Added in Locomotive Dimensions and Measurements section:
- EMD SD40A dimensions
2020-05-16
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD40A drawings
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38AC and GP40 drawings (IC versions)
- Added ATS shoe on the right front axle
- Revised cab side mirrors
- EMD GP38AC and GP40 drawings (IC versions)
2020-05-15
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP35 drawings (UP version)
- 2 EMD SD40X drawings (EMDX 434g-434H)
2020-05-14
- Added in Drawings/1:18 Undecorated section:
- 8 EMD SD35 drawings (ACL, BO and NW Phase 2b2 versions; SOU version)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD35 drawings (NW versions)
- Added lift rings below radiator intakes
- EMD SD35 drawings (NW versions)
- Increased 2020 drawing goal from 175 to 300 drawings
2020-05-13
- Added in Drawings/1:18 Undecorated section:
- 2 BFF 50' 6" 5312 cu-ft boxcar drawings
2020-05-06
- Added in Drawings/1:18 Undecorated section:
- 2 Trinity 3230 cu-ft hopper drawings
- 6 Trinity 5660 cu-ft hopper drawings
2020-05-04
- Added in Drawings/1:18 Undecorated section:
- 4 FMC 50' 6" 5272 cu-ft boxcar drawings
- 2 FMC 50' 6" 5317 cu-ft boxcar drawings
2020-04-29
- Added in Drawings/1:18 Undecorated section:
- 6 Thrall 3230 cu-ft hopper drawings
- 4 Thrall 5230 cu-ft hopper drawings
- 2 Trinity 3230 cu-ft hopper drawings
2020-04-24
- Revised in Drawings/1:18 Undecorated section:
- GE U36C drawings (ATSF Phase 2f left-side views)
- Added walkway box
- GE U36C drawings (ATSF Phase 2f left-side views)
- Added in Photos section:
- 19 photos from 2020-04-24
- Corrected capacity information for the following photos:
- NSC 60' 9" 7538 cu-ft boxcars, DWC 794000-795000 series (some previously listed as 7541 cu-ft)
2020-04-23
- Revised in Drawings/1:18 Undecorated section:
- Richmond Tank Car 4750 cu-ft hopper drawings
- Revised brake beams and slack adjuster
- Richmond Tank Car 4750 cu-ft hopper drawings
2020-04-22
- Added in Drawings/1:18 Undecorated section:
- 6 Trinity 33,600-gallon tank car drawings
2020-04-21
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD45 drawings (SLSF 943-948)
2020-04-20
- Updated photo notes (added cargo type) for the following photos:
- ACFX, CGTX and SHPX tank cars (LPG cars only)
- AMOX, BRSX, CTCX, CWBX, DCTX, EAMX, GLNX, JJJX, NATX, PLMX, PPRX, RCOX, SHQX, SRIX, TEAX, TEIX, TGPX and TILX tank cars (all)
2020-04-18
- Corrected builder/capacity information for the following photos:
- FMC 50' 6", 5272 cu-ft boxcars, GMRC 24000-series (many previously listed as 5283 cu-ft; incorrect dimensions/capacity in car stencils and ORER)
- FMC 50' 6", 5347 cu-ft boxcars, MEC #32074, #32110, #32144 (previously incorrectly listed as 5247 cu-ft)
- FMC 50' 6", 5355 cu-ft boxcar, GTRA #1170 (previously incorrectly listed as 5372 cu-ft)
- FMC 50' 7", 5283 cu-ft boxcar, CNA #407242 (previously incorrectly listed as 50' 6")
- FMC 50' 7", 6289 cu-ft boxcars, MMA 23500-series (builder previously incorrectly listed as PCF)
- PCF 50' 6", 5241 cu-ft boxcars, BM 3200- and 3300-series (a few previously listed as other various capacities; incorrect capacity in ORER)
- PCF 52' 6", 5528 cu-ft boxcar, LRS #4303 (previously listed based on incorrect dimensions/capacity in car stencils)
2020-04-17
- Added in Drawings/1:18 Undecorated section:
- 12 NSC well car drawings (53' 3-unit articulated versions)
- Revised in Drawings/1:18 Undecorated section:
- NSC well car drawings (Phase 2a-2d 53' stand-alone versions)
- Revised side sills above trucks
- NSC well car drawings (Phase 2a-2d 53' stand-alone versions)
2020-04-11
- Updated Drawing Accuracy section
- Added section "What's In an Inch?" describing the relative importance of dimensions
- Added a comparison image with a 1:55 drawing from late 2006
- Refined date ranges
- Created toggle show/hide for comparison images (hidden by default)
- Separated inline images and captions into boxes
- Updated Drawing History section (and all subsections) and Creating the Drawings section
- Separated inline images and captions into boxes
- Minor revisions and additions to history of 1:24 and 1:18 drawings
2020-04-10
- Continued transfer of 1:55 drawings from old pages to drawing search:
- ACF, Evans and FMC boxcar drawings (corrected builder info for ACF and Evans boxcars)
- Updated photo notes and information
- Corrected builder info for Evans/SIECO boxcars (most previously had builder absent or incorrectly listed as Berwick)
- Corrected minor errors in type information for various other boxcars
- Added archived drawing updates from 2007-2008
- Changed "Past Updates" of "What's New?" page from separate pages to Javascript links
2020-04-09
- Revised in Drawings/1:18 Undecorated section:
- GE U36B drawing (SCL Phase 2c left-side view)
- Added speed recorders on every axle
- GE U36B drawing (SCL Phase 2c left-side view)
- Continued transfer of 1:55 drawings from old pages to drawing search:
- Tank cars (all builders)
- Slightly revised display of drawing results
- Changed scale selection from links to Javascript checkboxes
2020-04-08
- Continued transfer of 1:55 drawings from old pages to drawing search:
- Evans, FMC, and Trinity exterior-post hopper drawings
2020-04-06
- Continued transfer of 1:55 drawings from old pages to drawing search:
- Pressurized hopper drawings (all builders)
- RTC 4750 cu-ft hopper drawings
- Gunderson, Trentonworks and Trinity boxcar drawings
2020-04-04
- Added in Drawings/1:18 Undecorated section:
- 2 Thrall 4727 cu-ft covered hopper drawings (1992 version)
2020-04-02
- Added in Drawings/1:18 Undecorated section:
- 4 Thrall 5750 cu-ft covered hopper drawings (1977-1979 versions)
2020-03-31
- Added in Drawings/1:18 Undecorated section:
- 4 Thrall 4727 cu-ft (convertible) covered hopper drawings
- 6 Thrall 5750 cu-ft covered hopper drawings
2020-03-30
- Significantly revised display of photos (small versions) and drawings
- Images displayed directly within the page using Javascript rather than opening separately
- Revised text-only photos page to include links for new searches within results
- Updated photo notes
- Added cargo type for sodium chlorate and carbon black hoppers
- Added classification for most TTX cars
2020-03-27
- Added in Drawings/1:18 Undecorated section:
- 6 NSC well car drawings (Phase 2b and 2c stand-alone versions)
2020-03-26
- Added in Photos section:
- 90 photos from 2020-03-25
2020-03-25
- Revised in Drawings/1:18 Undecorated section:
- All rolling stock with 100-ton trucks
- Revised truck springs
- All rolling stock with 100-ton trucks
- Added in Drawings/Colours section:
- BN Cream and Grinstein Green
- CNW yellow and green
- CREX blue, dark blue, grey and yellow
- G&W orange and yellow
- MEC Harvest Gold and Pine Green
- PICK orange
- TTX yellow, red and blue
2020-03-24
- Added in Drawings/1:18 Undecorated section:
- 4 NSC well car drawings (Phase 2a stand-alone versions)
2020-03-23
- Added in Drawings/1:18 Undecorated section:
- 4 NSC well car drawings (Phase 1 drawbar-connected and stand-alone versions)
2020-03-20
- Added in Drawings/1:18 Undecorated section:
- 4 Trinity 60' 9" 7500 cu-ft boxcar drawings (TBOX versions)
- Revised in Drawings/1:18 Undecorated section:
- Trinity 6235 cu-ft boxcar drawings (Phase 2 and 3 versions)
- Removed extra left end ladder support (left-side views only)
- Minor revisions to door and sill (except Phase 2 version and FBOX 6275 cu-ft version)
- Revised side door latches (FBOX 6275 cu-ft version only)
- Trinity 6235 cu-ft boxcar drawings (Phase 2 and 3 versions)
- Revised in Drawings/1:18 Painted section:
- FBOX #505314 (Trinity 6275 cu-ft boxcar)
- Revised side door latches
- FBOX #505314 (Trinity 6275 cu-ft boxcar)
2020-03-11
- Added in Drawings/1:18 Undecorated section:
- 2 Richmond Tank Car 4750 cu-ft hopper car drawings
2020-03-04
- Added in Photos section:
- 9 photos from 2020-01-29
2020-02-24
- Added in Drawings/1:18 Painted section:
- FBOX #505314 (Trinity 6275 cu-ft boxcar)
2020-02-22
- Added in Lettering and Logos section:
- TTX letters, numbers and logos (from FBOX/TBOX cars)
2020-02-21
- Added in Drawings/1:18 Undecorated section:
- 2 Trinity 6235 cu-ft boxcar drawings (BNSF/NKCR version)
- 2 Trinity 6275 cu-ft boxcar drawings (FBOX version)
- Revised in Drawings/1:18 Undecorated section:
- Trinity 6235 cu-ft boxcar drawings (Phase 2 and 3 versions)
- Relocated carbody end seams
- Revised door latch height
- Revised eave edge (except Phase 2 version)
- Side post spacing (except Phase 2 version)
- Trinity 6235 cu-ft boxcar drawings (Phase 2 and 3 versions)
2020-02-15
- Revised site styles and colours
2020-02-13
- Added in Drawings/1:18 Undecorated section:
- 1 GE U30B drawing (SLSF Phase 2g2 right-side view)
- Revised in Drawings/1:18 Undecorated section:
- GE U18B drawings (MEC version)
- GE U23B drawings (LN Phase 2h2 and LV versions)
- GE U30B drawings (CO and SLSF versions)
- Increased corner step spacing
2020-02-11
- Added in Drawings/1:18 Undecorated section:
- 2 GE U23B drawings (CO version)
- Revised in Drawings/1:18 Undecorated section:
- GE U18B right-side view (MEC version)
- GE U23B right-side views (CR, LN, LV and PC version)
- GE U30B right-side views (CO version)
- GE U36B right-side view (CR version)
- Removed pipe behind fuel tank (except U18B)
- Revised air filter behind fuel tank (except LV U23B)
- Most GE U18B, U23B, U30B and U36B right-side views
- Corrected minor line glitch in front upper air intake
- GE B23-7 right-side views (CR and MP versions)
- GE B30-7 right-side views (CO and SLSF versions)
- GE B30-7A right-side views
- GE B36-7 right-side views (ATSF and SBD versions)
- Revised air filter behind fuel tank
2020-02-10
- Added in Drawings/1:18 Undecorated section:
- 4 GE U30C drawings (LN Phase 2f versions)
2020-02-09
- Added in Drawings/1:18 Undecorated section:
- 2 GE U23B drawings (MON version)
- Added in Drawings/1:18 Undecorated section:
- GE U23B drawings (LN Phase 2g version)
- Revised headlight casing
- Added missing horn (right side view)
- GE U23B drawings (LN Phase 2g version)
2020-02-05
- Added in Drawings/1:18 Painted section:
- KCS #4040 (EMD SD70ACe)
- MKT #621 (EMD SD40-2)
- Revised in Drawings/1:18 Painted section:
- RI #342 (EMD GP40)
- Fuel tank supports
- Cab sub-base ribs
- Corrected minor line glitch on latches on first engine room door
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised handrail stanchion spacing
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack
- RI #342 (EMD GP40)
- Added in Lettering and Logos section:
- KCS lettering (large hood letters)
- MKT logo and numbering
2020-02-04
- Revised in Drawings/1:18 Painted section:
- CR #6381 (EMD SD40-2)
- DTI #224 (EMD GP38-2)
- GTW #5836 (EMD GP38-2)
- LN #8158 (EMD SD40-2)
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Revised radiator intake grills (CR #6381 and LN #8158 only)
- Revised exhaust stack (CR #6381 only)
- Added missing bell (LN #8158 only)
- Revised paper air filter housing (DTI #224 and GTW #5836 only)
- Added in Lettering and Logos section:
- EJE logo
- LSRC lettering and numbering
- SBD logo
2020-02-03
- Added in Lettering and Logos section:
- CEFX numbering
- G&W (CBNS) logo
- G&W (SLR) logo
- KCS logo and lettering
- PICK lettering
2020-02-02
- Added in Drawings/1:18 Painted section:
- PICK #9508 (GE U18B)
2020-02-01
- Added in Drawings/1:18 Painted section:
- CN #2501 (GE Dash 9-44CWL)
- Revised in Drawings/1:18 Painted section:
- CSXT #1524 (EMD GP15T)
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Corrected minor line glitch on latches on first engine room door
- CSXT #1524 (EMD GP15T)
- Revised in Drawings/1:18 Undecorated section:
- GE Dash 9-44CWL (CN left-side view)
- Revised dynamic brake vents
- Corrected line glitch in handrail behind cab
- GE Dash 9-44CWL (CN left-side view)
- Added in Lettering and Logos section:
- CSXT logo and numbers
2020-01-30
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 drawings (NW versions)
- Replaced all-weather cab window (as-modified) with standard window (as-built)
- Added awning (Phase 1a1 and 1a2 versions only)
- EMD GP35 drawings (NW versions)
2020-01-29
- Added in Drawings/1:18 Painted section:
- CSXT #1896 (GE U18B)
2020-01-28
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP30 drawings (ACL version)
- 2 EMD GP35 drawings (ACL version)
2020-01-27
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP30 drawings (NW version)
2020-01-25
- Added in Drawings/1:18 Undecorated section:
- 1 GE U30B drawing (SLSF Phase 2g1 left-side view)
- 1 GE U30C drawing (BN 5824-5833, 5929-5938 left-side view)
- Revised in Drawings/1:18 Undecorated section:
- GE U18B, U30B, U30C, U33C, U36B and U36C left-side views (Phase 2g1 and earlier units)
- Revised hood doors behind cab
- All GE U23C, U30C, U33C and U36C right-side views
- Corrected line glitch on brake chain pipe
- GE U18B, U30B, U30C, U33C, U36B and U36C left-side views (Phase 2g1 and earlier units)
- Revised in Locomotive Phases section:
- GE U18B, U23B, U30B, U33B, U36B Phases
- Divided Phase 2g into 2g1 and 2g2
- GE U23C, U30C, U33C, U36C Phases
- Divided Phase 2g1 into 2g1 and 2g2
- Changed Phase 2g2 to 2g3
- GE U18B, U23B, U30B, U33B, U36B Phases
2020-01-24
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP30 drawings (SOU versions)
2020-01-20
- Added in Drawings/1:18 Undecorated section:
- 10 EMD SD35 drawings (NW versions)
- 1 GE AC44C6M drawing (NS 4125-4274, second right-side view)
- Revised in Drawings/1:18 Undecorated section:
- GE AC44C4M and AC44C6M drawings
- Revised grabirons behind cab (left-side views)
- Thinner handrails behind cab (NS 4000-4001 only)
- GE AC44C4M and AC44C6M drawings
2020-01-19
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD35 drawings (CO Phase 2a3 version)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD35 and SD40X drawings
- Narrower stepwell edges
- EMD SD35 and SD40X drawings
2020-01-18
- Added in Drawings/1:18 Undecorated section:
- 13 EMD SD35 drawings (ACL, LN, PRR and SP versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 drawings (SP Phase 1d and 2b versions)
- Added lift rings below radiator intakes
- Removed rear numberboards (Phase 2b version)
- Added circular panels on long hood end (Phase 2b version)
- EMD GP35 drawings (SP Phase 1d and 2b versions)
2020-01-16
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD45 drawings (CBQ version)
- 7 GE Dash 9-44CW drawings (BNSF Phase 2a through 2d versions)
2020-01-15
- Added in Drawings/1:18 Undecorated section:
- 3 GE Dash 9-44CW drawings (BNSF Phase 2a versions)
- 2 GE ET44C4 drawings
- Revised in Drawings/1:18 Painted section:
- AA #2373 (EMD GP39-2)
- Revised center hood door spacing
- Revised hood behind cab
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
- CN #5570 (GMD GP38-2(W))
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- Revised paper air filter housing
- CN #9511 (GMD GP40-2L(W))
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door
- Revised radiator intake grills
- Revised exhaust stack
- CREX #1328 (GE ES44AC)
- Thinner side handrails
- AA #2373 (EMD GP39-2)
2020-01-14
- Revised in Drawings/1:18 Undecorated section:
- GE ES-series drawings (most AC versions and Phase 2e DC versions)
- Revised grabirons behind cab (all left-side views)
- Revised wide handrail stanchions (Phase 2e and later versions)
- Thinner side handrails (Phase 2f2 and 2g versions)
- GE ES-series drawings (most AC versions and Phase 2e DC versions)
2020-01-11
- Updated the Drawing Accuracy and Locomotive Dimensions pages
- Added more information about the drawing scales and how to obtain dimensions from the drawings
- Revised in Drawings/1:18 Undecorated section:
- 2 EMD GP38AC drawings (SOU version)
- Added stepwell lights
- Lowered flag holder (right side)
- 2 EMD GP38-2 drawings (SOU Phase 1b2 left-side views)
- Revised speed recorder
- 2 EMD GP38AC drawings (SOU version)
- Corrected numbering for GE ES44C4 drawings (BNSF Phase 2f versions)
- Revised in Locomotive Phases section:
- EMD GP38, GP39, GP40 Phases
- EMD GP38-2 Phases
- EMD GP40-2 Phases
- EMD SD38-2, SD40-2, SD45-2 Phases
- GE ES Series Phases
- Minor wording revisions
- EMD SD70M-2, SD70ACe Phases
- Added production dates
2020-01-10
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP40X drawings
- 5 EMD SD40X drawings
- Revised in Locomotive Phases section:
- EMD/GMD GP28, GP35 Phases
- EMD SD28, SD35, SDP35, SD40X Phases
- Added more information about GP40X and SD40X test-beds
- EMD SD38, SD39, SD40, SD45 Phases
- Added introductory text describing model history
- Added transition from SD35 to SD40
- Added more references
2020-01-09
- Added in Drawings/1:18 Undecorated section:
- 6 EMD SD35 drawings (BO and CO versions)
- Added in Locomotive Phases section:
- EMD SD28, SD35, SDP35, SD40X Phases
2020-01-05
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP39-2, GP39X and GP59 drawings
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (GP39X)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
- All EMD SD50, SD60, SD60M and SD60I drawings
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
- Revised hood behind cab (SD50 and SD60 right-side views only)
- All EMD GP39-2, GP39X and GP59 drawings
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD60M, SD60I
2020-01-04
- Continued transfer of 1:55 drawings from old pages to drawing search:
- GMD SD40-2(W)
2020-01-03
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD F40PH, F40M-2F, F45, FP45, SDP40F, SDF40-2, SD60MAC
- EMD SD70ACe (CSXT, EMDX, MRL and UP versions)
- EMD SD70M-2 (all versions)
- GMD F40PH-2D, SD50F, SD60F
- Revised in Locomotive Phases section:
- EMD SD70M-2, SD70ACe Phases
- Separated Phase 2a into 2a1 and 2a2
- EMD SD70M-2, SD70ACe Phases
2020-01-02
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD70ACe (BNSF, FXE and KCS versions)
2020-01-01
- Changed drawing links to arrows representing different sides (instead of multiple model names with an asterisk for right-side views)
- Revised Website Building section
- Added "User Interface" subsection
- Revised Site History section
- Added toggle option to show/hide screenshots of past versions of the site
Past Updates - 2019
2019-12-31
- Made minor changes in shape of green navigation bar and white menu tabs (border radius percent rather than px)
- Significantly revised layout and simplified presentation of Photos section (in page displaying photo search results)
- Clarified page numbers and range of displayed images
- Moved sort feature to table header and options to immediately above table (allowing for removal of numerous sort/options links previously at the top right of the page)
- Moved number/type/date information to the left of images instead of below
- Changed default presentation from images to text-only
- Added in Drawings/1:18 Undecorated section:
- 15 GE U30C drawings (BN versions)
- 3 GE U33C drawings (BN versions)
- Revised in Drawings/1:18 Undecorated section:
- 2 GE U23C drawings (LSI version)
- Revised intakes under radiators (paper to oil bath air filters)
- 2 GE U23C drawings (LSI version)
2019-12-30
- Revised in Drawings/1:18 Undecorated section:
- 2 GE U36C drawings (ATSF left-side views with Rockwell trucks)
- Removed redundant truck casting lettering
- Revised truck casting holes
- 2 GE U36C drawings (ATSF left-side views with Rockwell trucks)
- Revised in Locomotive Phases section:
- GE U18B, U23B, U30B, U33B, U36B phases
- Added minor details and dates for Phase 2d
- GE U23C, U30C, U33C, U36C phases
- Converted to tabular format
- Added introductory text describing model history
- Added production dates for all phases
- Added references
- GE U18B, U23B, U30B, U33B, U36B phases
2019-12-29
- Revised in Locomotive Phases section:
- GE B23-7, B30-7, B30-7A, B36-7 phases
- GE C30-7, C30-7A, C36-7 phases
- Added introductory text describing model history
- Added production dates for all phases
- Added references
2019-12-28
- Added in Drawings/1:18 Undecorated section:
- 18 GE C30-7 drawings (BN versions)
- Revised in Locomotive Phases section:
- GE Dash 9 series phases
- Added information about BCOL and CN model variations
- GE Dash 9 series phases
2019-12-27
- Revised in Drawings/1:18 Undecorated section:
- 2 GE C30-7 drawings (ATSF Phase 1b version, CR version)
- Revised fuel cutoff switch housing
- 2 GE C30-7 drawings (ATSF Phase 1b version, CR version)
- Revised in Locomotive Phases section:
- GE C30-7, C30-7A, C36-7 phases
- Split Phase 1a into 1a and 1b; former Phase 1b now 1c
- GE C30-7, C30-7A, C36-7 phases
2019-12-12
- Revised in Drawings/1:18 Undecorated section:
- 8 EMD GP38 drawings (PC and PRSL versions with extended cab)
- Revised short hood grabiron location and cab roof profile
- 8 EMD GP38 drawings (PC and PRSL versions with extended cab)
2019-11-02
- Added in Drawings/1:18 Undecorated section:
- 10 GE ES44AC drawings
- CN, CREX, KCS, NS and UP Phase 2g versions (all except UP version previously grouped with Phase 2f2 versions)
- 1 GE ES44C4 drawing
- BNSF Phase 2g right-side view
- 10 GE ES44AC drawings
- Revised in Drawings/1:18 Undecorated section:
- 2 GE ES44AC drawings (IAIS Phase 2f2 version)
- 3 GE ES44C4 drawings (BNSF late Phase 2f2 left-side view, FEC version)
- Changed from Phase 2f2 to 2g
- Revised in Locomotive Phases section:
- GE ES-series phases
- Added Phase 2g
- GE ES-series phases
2019-10-03
- Revised in Drawings/1:18 Undecorated section:
- GE Dash 9-40CW and ES40DC drawings (NS versions)
- Revised rear ditch lights
- GE Dash 9-40CW and ES40DC drawings (NS versions)
2019-08-22
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RS-11 drawings
- SAL version
- 2 ALCO RS-11 drawings
2019-08-21
- Added in Drawings/1:18 Painted section:
- DWP #3600 (ALCO RS-11)
- Revised in Drawings/1:18 Undecorated section:
- All ALCO RS-11 and RS-36 drawings
- Decreased height of cab sub-base doors
- Revised base of handrail stanchion near long hood end (except Phase 2b RS-11 and RS-36)
- All ALCO RS-11 and RS-36 drawings
- Added in Lettering and Logos section:
- DWP lettering
2019-08-20
- Added in Drawings/1:18 Painted section:
- SLSF #867 (GE B30-7)
- SLSF #923 (EMD SD45)
- Revised in Drawings/1:18 Undecorated section:
- GE B30-7 drawings (SLSF version)
- Revised panels on walkway side frame (left side)
- Added fuel cutoff switch on walkway side frame
- Added in Lettering and Logos section:
- SLSF lettering and numbering
2019-08-18
- Added in Drawings/1:18 Undecorated section:
- 10 EMD GP35 drawings
- AA versions
- SLSF Phase 2a-2c versions
- 6 EMD SD45 drawings
- SLSF versions
- 10 EMD GP35 drawings
2019-08-13
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP30 drawings
- PRR versions
- 2 GE U23B drawings
- WP version
- 4 EMD GP30 drawings
- Revised in Drawings/1:18 Undecorated section:
- EMD GP30 (CNW version)
- Removed dynamic brakes (left side)
- EMD GP30 (CNW version)
2019-08-12
- Added revision history for GE ES40DC and ES44DC and GMD SD40-2 drawings
- Revised in Drawings/1:18 Undecorated section:
- GE 4-axle Universal and Dash-7 series drawings (versions with Adirondack FB-2 trucks only)
- Corrected line glitch on left front/right rear axles (exposed axle caps only)
- Removed stray pixel from #2 axle (left side)
- GE ES-series drawings (Phase 2f1 and 2f2 left-side views only)
- Corrected minor transparency issue in radiators
- All GMD SD40-2 drawings
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door
- GE 4-axle Universal and Dash-7 series drawings (versions with Adirondack FB-2 trucks only)
2019-08-11
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP38-2 drawings
- VTR versions
- 4 EMD GP38-2 drawings
- Revised in Drawings/1:18 Painted section:
- ATSF GP60B #345
- ATSF GP60M #143
- BN GP50 #3118
- Revised center hood door spacing
- Revised hood behind cab (BN #3118 only)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
- Corrected latch spacing on rear hood doors (ATSF #345 only)
- BN SD40-2 #8004
- BNSF SD40-2 #8010
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches first engine room door
- BO GP40-2 #1977
- BO GP40-2 #4331
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward (BO #1977)
- Front right traction motor cables and air piping moved 0.75" to 1" rearward (BO #4331)
- Revised radiator intake grills
- Revised exhaust stack
2019-08-10
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP38AC drawings
- SOU version
- 6 EMD GP50 drawings
- ATSF versions
- 2 EMD GP38AC drawings
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD38, SD40, SD45 and SDP45 right-side views (except PRR/PC versions with cab signal box)
- Added missing grabiron ahead of right-side battery box
- EMD GP38 and GP40 right-side views (PRR/PC versions with cab signal box)
- Removed grabiron ahead of right-side battery box
- EMD GP35, GP38AC, GP40, SD40 and SD45 drawings (NW right side views only)
- Corrected glitch in short hood headlight
- EMD SD45 drawings (SOU right side views only)
- Corrected glitch in cab eave drip rail
- All EMD SD38, SD40, SD45 and SDP45 right-side views (except PRR/PC versions with cab signal box)
2019-08-08
- Added in Drawings/1:18 Undecorated section:
- 10 EMD GP38-2 drawings
- GMO versions
- SOU Phase 1a through 1b2 versions
- 10 EMD GP38-2 drawings
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38 drawings (ATSF 3529-3560)
- Added top corner step plate
- All EMD GP60, GP60B and GP60M drawings
- Revised center hood door spacing
- Revised hood behind cab
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
- Corrected latch spacing on rear hood doors (GP60B only)
- EMD GP38 drawings (ATSF 3529-3560)
2019-08-07
- Added in Drawings/1:18 Undecorated section:
- 6 EMD SD45-2 drawings
- ATSF versions
- 6 EMD SD45-2 drawings
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 drawings (Phase 2 left side views)
- Corrected line/crop issue at right of image
- EMD GP40-2 (SCL Phase 2c1 left side view)
- Removed partial cab light glitch
- EMD SD45-2 drawings (CRR and SCL versions)
- Changed center axle shock strut to earlier version
- EMD GP35 drawings (Phase 2 left side views)
2019-08-06
- Revised in Drawings/1:18 Undecorated section:
- EMD GP15T drawings
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Corrected minor line glitch on latches on first engine room door
- All EMD GP38-3 drawings (NS versions) and GP50 drawings
- Revised center hood door spacing
- Revised hood behind cab
- Blower duct widened by 1" (Phase 1 versions)
- Increased height of walkway blower duct and bottom of hood doors
- Corrected minor line glitch on latches on first engine room door
- EMD GP15T drawings
2019-07-31
- Added revision history for EMD GP30 and GP30B drawings
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP30 and GP30B drawings
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors narrowed by 0.75"
- Middle hood doors narrowed by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- All EMD GP30 and GP30B drawings
2019-07-30
- Added revision history for EMD GP15-1 and GP15AC drawings
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP15-1 and GP15AC drawings
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle hood doors narrowed by 0.75"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Corrected handrail glitch behind cab (CNW and SLSF GP15-1 left-side views only)
- All EMD GP15-1 and GP15AC drawings
2019-07-23
- Added revision history for EMD GP38-3 and SD45-2 drawings
- Revised in Drawings/1:18 Undecorated section:
- EMD SD45-2 drawings
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle hood doors narrowed by 0.5"
- Rear hood seam and doors moved rearward by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack and dynamic brake taper
- EMD SD45-2 drawings
2019-07-23
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-3 drawings (FWWR versions)
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Corrected minor line glitch on latches on first engine room door
- Revised radiator intake grills and roof fan hatch (FWWR 2004-2005 only)
- Revised handrail stanchion spacing (FWWR 2004-2005 only)
- Fuel tank and air reservoirs moved 1" to 1.5" rearward (FWWR 2004-2005 only)
- EMD GP38-3 drawings (FWWR versions)
2019-07-22
- Revised in Drawings/1:18 Undecorated section:
- GE BQ23-7 drawings
- Removed panel above front steps
- GE U23B drawings (LN versions)
- Changed couplers from Type E to Type F
- EMD SD40 drawings (LN Phase 2b1 and 2b2 versions)
- Changed to earlier handrail stanchions (bottoms not lined up)
- GE BQ23-7 drawings
- Revised in Drawings/1:18 Painted section:
- SCL #5134 (GE BQ23-7)
- Removed panel above front steps
- SCL #5134 (GE BQ23-7)
2019-06-29
- Added in Photos section:
- 5 photos from 2019-04-04
- 26 photo from 2019-03-26
2019-03-20
- Revised terms of use of the drawings - see Drawings section
2019-01-31
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38AC drawings (GTW version)
- Added missing snow shields
- EMD GP38AC drawings (GTW version)
2019-01-28
- Added revision history for GMD SD40-2(W) drawings
- Revised in Drawings/1:18 Undecorated section:
- All GMD SD40-2(W) drawings
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised exhaust stack
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- All EMD SD45 and SDP45 drawings
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
- All GMD SD40-2(W) drawings
2019-01-25
- Added revision history for GMD GP38-2(W), GP40-2(W) and GP40-2L(W) drawings
- Revised in Drawings/1:18 Undecorated section:
- All GMD GP38-2(W), GP40-2(W) and GP40-2L(W) drawings
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Corrected minor line glitch on latches on cab sub-base door and first engine room door
- Revised paper air filter housing (GP38-2(W) only)
- Revised radiator intake grills (except GP38-2(W))
- Revised exhaust stack (except GP38-2(W))
- All GMD GP38-2(W), GP40-2(W) and GP40-2L(W) drawings
2019-01-24
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP38-2 and GP40-2 drawings
- Fuel tank moved 2.5" rearward (3,600 gallon tank only)
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward
- Revised exhaust stack (GP40-2, except Phase 2c1 and later)
- All EMD GP38-2 and GP40-2 drawings
2019-01-23
- Added revision history for EMD SD38-2 drawings
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD38-2 drawings
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Revised paper air filter housing and dynamic brake taper
- All EMD/GMD GP38, GP38AC and GP40 drawings
- Revised handrail stanchion spacing (except Phase 2c units)
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Revised exhaust stack (GP40 only)
- Corrected pipe overlapping bell (versions with underframe bell only)
- All EMD/GMD SD40 drawings
- Relocated dynamic brakes
- Revised exhaust stack
- Corrected error with 4th handrail stanchion from rear (some units)
- All EMD SD38-2 drawings
2019-01-22
- Added revision history for EMD GP38-2 and SD40-2 drawings
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP38-2 and SD40-2 drawings
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised roof fan hatch
- Revised paper air filter housing and dynamic brake taper (GP38-2 only)
- Revised radiator intake grills (SD40-2 and Phase 1a GP38-2)
- Revised exhaust stack (SD40-2, except Phase 2c1 and later units)
- EMD SD40-2 drawings (most Phase 1b2 and earlier units drawn prior to 2017-09-26)
- Corrected minor line glitch on latches on first engine room door
- EMD SD40-2 drawings (Family Lines Phase 2c and 2d versions)
- Added missing bell
- All EMD GP38-2 and SD40-2 drawings
2019-01-21
- Added revision history for EMD GP40-2 drawings
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP40-2 drawings
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- All EMD GP40-2 drawings
2019-01-20
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SDP45 (SD45M) drawings
- EL versions
- 4 EMD SDP45 (SD45M) drawings
- Added in Locomotive Dimensions and Measurements section:
- EMD SDP45 (SD45M) dimensions
- Revised in Drawings/1:18 Undecorated section:
- EMD/GMD GP28, GP35, GP38, GP40 and SD40 drawings (versions with dynamic brakes, except GP38's with paper air filters)
- Made minor dimension correction to dynamic brake blister that was omitted in previous revisions
- EMD/GMD GP28, GP35, GP38, GP40 and SD40 drawings (versions with dynamic brakes, except GP38's with paper air filters)
2019-01-18
- Added drawing revision history for the following models:
- EMD GP28
- EMD SD38
- EMD SD40
- GMD SD40
- Revised in Drawings/1:18 Undecorated section:
- All EMD/GMD GP28, GP35, GP38, GP38AC, SD38 and SD40 drawings; EMD GP40 drawings (LLPX version)
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch (GP38, GP38AC, GP40 and SD40)
- Revised paper air filter housing and dynamic brake taper (GP38 and GP38AC only)
- Corrected minor line glitch on latches on first engine room door (GP28 and SD38 only)
- All EMD/GMD GP28, GP35, GP38, GP38AC, SD38 and SD40 drawings; EMD GP40 drawings (LLPX version)
2019-01-17
- Added revision history for EMD SD45 drawings
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP40 drawings (except LLPX version)
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- All EMD SD45 drawings
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
- Revised radiator intake grills
- All EMD GP40 drawings (except LLPX version)
2018-01-14
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RS-11 drawings
- PRR Phase 1a1 version (8626-8635)
- 2 ALCO RS-11 drawings
- Revised in Drawings/1:18 Undecorated section:
- ALCO RS-11 drawings (except NW versions with louvered air intakes)
- Revised air cooling manifold piping (over intercooler intake)
- ALCO RS-11 drawings (except NW versions with louvered air intakes)
- Revised in Drawings/1:18 Painted section:
- LN #8158 (EMD SD40-2)
- SCL #5134 (GE BQ23-7)
- Revised shades of yellow and red
2018-01-12
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO RS-11 drawings
- NYC version
- PRR Phase 1a2 version
- 4 ALCO RS-11 drawings
- Revised in Drawings/1:18 Undecorated section:
- All MLW RS-10, RS-18 and RSC-14 left-side views
- Added rooftop vent on conductor's side behind cab
- All MLW RS-10, RS-18 and RSC-14 left-side views
2018-01-11
- Revised in Drawings/1:18 Undecorated section:
- All ALCO RS-11 drawings
- Replaced curved sanding line pipe at ends with hose (DWP, LV and MEC versions)
- Replaced standard sanding pipe and hose with lower control valves at front (LV version only)
- Revised pipes on engineer's side behind fuel tank
- Added rooftop vent on conductor's side behind cab
- All ALCO RS-11 drawings
2018-01-09
- Added in Drawings/1:18 Undecorated section:
- 8 ALCO RS-11 drawings
- LV version
- NW Phase 2a1 and 2b versions
- 2 ALCO RS-36 drawings
- NW version
- 8 ALCO RS-11 drawings
- Revised in Drawings/1:18 Undecorated section:
- All ALCO RS-11 drawings
- Shorter cab side window
- Corrected minor glitch in left rear/right front draft gear (NW versions only)
- Added radiator fan clips
- All MLW RS-10, RS-18 and RSC-14 drawings
- Added radiator fan clips
- All ALCO RS-11 drawings
2019-01-07
- Added in Drawings/1:18 Undecorated section:
- 12 ALCO RS-11 drawings (NW Phase 1a2 and 1c versions)
- Added in Locomotive Phases section:
- ALCO RS-11 phases
2019-01-05
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RS-11 drawings (NW Phase 1a as-modified version)
2019-01-03
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RS-11 drawings (NW Phase 1a version)
- Revised in Drawings/1:18 Undecorated section:
- All existing MLW RS-18 and RSC-14 drawings
- Increased frame height by 0.5"
- Added front sand line control valve (versions with Type B trucks only)
- All existing MLW RS-18 and RSC-14 drawings
2019-01-02
- Revised in Drawings/1:18 Undecorated section:
- All existing ALCO RS-11 and MLW RS-10S drawings
- Increased frame height by 0.5"
- Added front sand line control valve (versions with Type B trucks only)
- All existing ALCO RS-11 and MLW RS-10S drawings
Past Updates - 2018
2018-12-31
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RS-11 drawings (MEC/PTM version)
2018-12-30
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO RS-11 drawings (DWP version)
2018-12-29
- Added in Drawings/1:18 Undecorated section:
- 2 MLW RS-10S drawings (CN 3066-3073)
2018-12-28
- Corrected several glitches in underlying code in various Drawings pages
- Added revision history for drawings of the following models:
- EMD GP15D
- EMD GP20D
- GE AC44C4M
- GE AC44C6M
- GE Dash 9-40C
- GE Dash 9-40CW
- GE Dash 9-44CW
- GE Dash 9-44CWL
- Added in Drawings/1:18 Undecorated section:
- 8 GMD GP40 drawings (CN versions)
- 2 GE AC44C6M drawings (NS 4125-4174)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP15D and GP20D right-side views
- Added missing plate under jacking pads
- GE Dash 9-40CW drawings (NS 8889-9128 left-side views)
- Corrected underframe line glitch above fuel gauge
- EMD GP15D and GP20D right-side views
- Revised in Drawings/1:18 Painted section:
- CEFX #2040 (EMD GP20D)
- Added missing plate under jacking pads
- CEFX #2040 (EMD GP20D)
2018-12-26
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP38 drawings (ATSF versions)
- Added in History of Scale Drawings - 1:24 and 1:18 Series:
- Scale timeline image illustrating all drawing scales from 2000 to the present
- Revised in Locomotive Phases section:
- Added drawings illustrating phase details to the following pages:
- EMD GP35 Phases
- EMD GP38, GP39, GP40 Phases
- EMD GP40-2 Phases
- EMD SD38-2, SD40-2, SD45-2 Phases
- GE AC4400CW Phases
- EMD GP38, GP39, GP40 phases
- Added step clearance
- EMD GP40-2 phases
- Removed ratchet/wheel handbrake distinction (not a consistent phase detail)
- GE ES-series phases
- Combined phase descriptions into a single table
- Added production dates
- Added drawings illustrating phase details to the following pages:
2018-12-21
- Added in Drawings/1:18 Undecorated section:
- 4 GE U23B drawings (PC versions)
- Added in Locomotive Dimensions page:
- MLW RSC-14 dimensions
2018-12-20
- Added in Drawings/1:18 Undecorated section:
- 4 MLW (Rebuild) RSC-14 drawings
- Revised in Drawings/1:18 Undecorated section:
- Most GE Universal series right-side views (prior to Phase 2h1)
- Added water level sight glass on right rear of hood
- Most GE Universal series right-side views (prior to Phase 2h1)
- Revised in Locomotive Phases section:
- GE U18B, U23B, U30B, U33B, U36B phases
- Added water level sight glass (present prior to Phase 2h1)
- GE U18B, U23B, U30B, U33B, U36B phases
2018-12-18
- Added in Drawings/1:18 Undecorated section:
- 6 MLW RS-18 drawings
- CN 3705-3745
- PGE 589-590
- 6 MLW RS-18 drawings
- Revised in Drawings/1:18 Undecorated section:
- MLW RS-10 and RS-18 left-side views (except versions with wide fuel tank)
- Added missing pipe at rear of fuel tank
- MLW RS-10 and RS-18 left-side views (except versions with wide fuel tank)
- Revised in Locomotive Phases section:
- MLW RS-10, RS-18 phases
- Added Phase 1d (RS-18)
- MLW RS-10, RS-18 phases
2018-12-17
- Added in Drawings/1:18 Undecorated section:
- 2 MLW RS-18 drawings (CN 3850-3893)
- Revised in Drawings/1:18 Undecorated section:
- MLW RS-18 (late CP right-side view)
- Added missing pipe in front underframe
- MLW RS-18 (late CP right-side view)
- Revised in Locomotive Phases section:
- MLW RS-10, RS-18 phases
- Added RS-18 phases (model history was previously listed without phases)
- MLW RS-10, RS-18 phases
2018-12-15
- Added in Drawings/1:18 Undecorated section:
- 2 MLW RS-18 drawings (CN 3100-3129, 3840-3849)
2018-12-14
- Added in Drawings/1:18 Undecorated section:
- 2 MLW RS-18 drawings (CN 3830-3839)
- Revised in Drawings/1:18 Undecorated section:
- All MLW RS-10 and RS-18 drawings
- Corrected cab door handle orientation
- Revised battery box covers
- Added missing rear sand hatch (right-side views)
- Revised short hood door size
- Revised carbody air filters (CN as-modified versions)
- All MLW RS-10 and RS-18 drawings
2018-12-12
- Added in Drawings/1:18 Undecorated section:
- 4 MLW RS-18 drawings (CN 3701-3745)
- Revised in Drawings/1:18 Undecorated section:
- All MLW RS-10 and RS-18 right-side views
- Revised piping and air fittings behind fuel tank
- MLW RS-18 drawings (CP and PGE versions)
- Revised fuel tank height
- All MLW RS-10 and RS-18 right-side views
2018-12-10
- Added revision history for EMD GP38 and GP38AC drawings
- Added in Drawings/1:18 Undecorated section:
- 2 GMD GP38AC drawings (CP version)
- Revised in Drawings/1:18 Undecorated section:
- Most EMD GP38 and GP38AC drawings
- Corrected minor line glitch on latches on first engine room door
- Revised step/corner handrail height (BN version only)
- Most EMD GP38 and GP38AC drawings
- Revised in Locomotive Phases section:
- EMD GP35 Phases
- Converted to tabular format
- Added description
- Added references
- Combined EMD and GMD phases into a single page
- EMD GP35 Phases
2018-12-06
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP18 drawings (SAL version)
- 4 EMD GP18M drawings (RI versions)
- 2 GE U23C drawings (LSI Phase 2e version)
2018-12-04
- Added in Drawings/1:18 Undecorated section:
- 6 GE U36B drawings (SCL Phase 2c through 2f versions)
- 8 GE U36C drawings (ATSF Phase 2f and 2g versions)
- Revised in Locomotive Phases section:
- GE U18B, U23B, U30B, U33B, U36B phases
- Clarified changes from pre-existing phases by David Thompson
- Added change in air reservoir supports
- GE U18B, U23B, U30B, U33B, U36B phases
2018-12-03
- Added revision history for MLW M-630 and M-636 drawings
- Revised in Drawings/1:18 Undecorated section:
- MLW M-630 and M-636 drawings (right-side views with as-built front air intake)
- Added missing intake on right side behind cab
- MLW M-630 and M-636 drawings (right-side views with as-built front air intake)
- Revised in Locomotive Phases section:
- GE U18B, U23B, U30B, U33B, U36B phases
- Added additional description
- Added references
- GE U18B, U23B, U30B, U33B, U36B phases
2018-12-01
- Added in Drawings/1:18 Undecorated section:
- 4 GE U36C drawings (ATSF Phase 2h1 versions)
- Revised in Drawings/1:18 Undecorated section:
- GE C30-7 drawings (all ATSF versions)
- Removed brake lever pins from truck sideframe
- Corrected height of Hyatt wheel bearings (Phase 1a right-side view only)
- GE C30-7 drawings (all ATSF versions)
2018-11-29
- Added in Drawings/1:18 Undecorated section:
- 2 GE C30-7 drawings (ATSF Phase 2b right-side views)
- Revised in Drawings/1:18 Undecorated section:
- GE C30-7 drawings (ATSF versions)
- Added louvers on left-side cab sub-base (Phase 1a and 1b left-side views)
- Added 2 sets of louvers on right-side cab sub-base (Phase 1b right-side views)
- Removed front louvers from right-side cab sub-base (Phase 2c right-side views)
- GE C30-7 drawings (ATSF versions)
2018-11-29
- Added in Drawings/1:18 Undecorated section:
- 4 GE U23B drawings (LN versions)
- 4 GE U30B drawings (CO versions)
- Revised in Locomotive Phases section:
- GE U18B, U23B, U30B, U33B, U36B phases
- Added Phase 2h2 (previous 2h2/2h3 now 2h3/2h4)
- GE U18B, U23B, U30B, U33B, U36B phases
2018-11-27
- Added in Drawings/1:18 Undecorated section:
- 4 GE U18B drawings (MEC and NDEM versions)
- 4 GE U23B drawings (LV and MP versions)
- 4 GE U30B drawings (SLSF Phase 2g and 2h2 versions)
2018-11-26
- Added in Drawings/1:18 Undecorated section:
- 6 GE U23B drawings (MP versions)
- Revised in Locomotive Phases section:
- GE U18B, U23B, U30B, U33B, U36B phases
- Added production dates
- Various detail changes in Phase 2b1 through 2c
- Split original phase 2h1 into 2h1 and 2h2
- Removed phase 2f2 and 2g2
- GE U18B, U23B, U30B, U33B, U36B phases
2018-11-25
- Added in Drawings/1:18 Undecorated section:
- 2 GE U23B drawings (CR version)
2018-11-24
- Added in Drawings/1:18 Undecorated section:
- 8 GE U36B drawings (AT, CR and SCL versions)
2018-11-23
- Added in Drawings/1:18 Undecorated section:
- 4 GE U18B drawings (SCL versions)
- Revised in Locomotive Phases section:
- GE U18B, U23B, U30B, U33B, U36B phases
- Converted to tabular format
- Added general series history and description
- Added U18B to model list
- Added Phase 1c2
- Corrected a couple of minor errors
- GE U18B, U23B, U30B, U33B, U36B phases
2018-11-22
- Added revision history for all GE Dash-7 drawings
- Revised in Drawings/1:18 Undecorated section:
- All 6-axle GE Dash-7 drawings
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports (Phase 1a units only)
- Added end-mounted fuel gauge (either front or rear) on fuel tank
- All 6-axle GE Dash-7 drawings
2018-11-21
- Added in Drawings/1:18 Undecorated section:
- 2 GE U18B drawings (SCL version)
- 1 GE B23-7 drawing (CR early Phase 2a left-side view)
- Revised in Drawings/1:18 Undecorated section:
- All 4-axle GE Dash-7 drawings
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports (Phase 1a through 2a units only)
- Relocated rear traction motor cables closer to fuel tank (some Phase 1a and 2a units)
- Added end-mounted fuel gauge (either front or rear) on fuel tank (most units)
- All 4-axle GE Dash-7 drawings
2018-11-17
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD40-2 (NW, RI, SLSF and SOU versions)
2018-11-16
- Added in Drawings/1:18 Undecorated section:
- 10 EMD GP35 drawings (CEI versions)
2018-11-15
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP35 drawings (RDG Phase 1b1 and 1d versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 drawing (RDG Phase 1a1 left side view)
- Corrected glitch in speed recorder cable
- EMD GP35 drawing (RDG Phase 1a1 left side view)
2018-11-14
- Added in Drawings/1:18 Undecorated section:
- 13 EMD GP35 drawings
- NW Phase 1c1/1c2 versions
- RI Phase 2a version
- ATSF, EL, RI and SP/SSW Phase 2b versions
- 13 EMD GP35 drawings
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 drawings (DRGW versions)
- Revised steps and pilots
- EMD GP35, GP40 and SD40 drawings (SP/SSW versions)
- Added circular vent on top of short hood
- EMD GP35 drawings (DRGW versions)
- Revised in Drawings/1:18 Painted section:
- SP #6640 (EMD GP35)
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)
- Added circular vent on top of short hood
- SP #6640 (EMD GP35)
2018-11-13
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP35 drawings (BO/CO Phase 2b version)
2018-11-12
- Added in Drawings/1:18 Painted section:
- BO #1977 (EMD GP40-2)
2018-11-11
- Added revision history for EMD GP35 drawings
- Revised in Drawings/1:18 Undecorated section:
- Most EMD GP35 drawings (except early ATSF and CBQ versions)
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct on Phase 1c and 1d versions (GP40-style: fewer bolts, edge seam)
- Most EMD GP35 drawings (except early ATSF and CBQ versions)
2018-11-03
- Added in Drawings/1:18 Undecorated section:
- 8 EMD GP35 drawings (ATSF versions)
- Added in Drawings/1:18 Painted section:
- CBNS #3366 (EMD SD40-2)
2018-11-01
- Added in Drawings/1:18 Painted section:
- SLR #3008 (EMD GP40-2)
2018-10-31
- Many small updates to underlying code in drawings pages (no changes in appearance)
- Introduced revision history feature for 1:18 drawings, accessible by hovering over last-modified date
- Added revision history for EMD GP40, GP50, GP50L, GP59, GP60, GP60B and GP60M drawings
- Added in Drawings/1:18 Undecorated section:
- 3 EMD GP40 drawings (LLPX ex-RI version, RI 362-381 left-side view)
- Revised in Drawings/1:18 Undecorated section:
- Most EMD GP40 drawings
- Corrected minor line glitch on latches on first engine room door
- Most EMD GP40 drawings
2018-10-24
- Added in Drawings/1:18 Undecorated section:
- 10 EMD GP38-2 drawings (LV and RI versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2 right-side views (PC versions with hinged battery box cover)
- Corrected glitch in cab sub-base door
- EMD GP38-2 right-side views (PC versions with hinged battery box cover)
2018-10-17
- Added in Drawings/1:18 Painted section:
- DWP #5904 (EMD SD40)
- Revised in Drawings/1:18 Painted section:
- DTI #6419 (EMD GP40-2)
- Revised cab number font
- DTI #6419 (EMD GP40-2)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40 drawings (GTW versions)
- Removed rear numberboards
- EMD SD40 drawings (GTW versions)
2018-10-15
- Added in Drawings/Logos section:
- DWP logo
2018-10-05
- Revised in Drawings/1:18 Undecorated section:
- EMD SD38 (PC version) and SD40 (BO/CO Phase 1b2 version)
- Updated handrail stanchions with even bottoms
- EMD SD38 (PC version) and SD40 (BO/CO Phase 1b2 version)
2018-09-22
- Added in Photos section:
- 11 photos from 2018-08-27
- 18 photos from 2018-08-25
2018-09-21
- Added in Photos section:
- 89 photos from 2018-08-24
- 21 photos from 2018-05-17
2018-09-16
- Added in Drawings/Logos section:
- CREX "Citirail" lettering and fonts
- CV "noodle" logo
- GE builder's sticker (ES series)
- GTW "noodle" logo (2 variations)
- SHPX freight car lettering
- VIA logo
2018-09-11
- Revised in Drawings/1:18 Undecorated section:
- GE Dash 8-40CW drawings (late CSXT versions) and Dash 8-44CW drawings
- Revised rear numberboards with hinged housing (except late Dash 8-44CW)
- Removed rear numberboards (late Dash 8-44CW)
- GE Dash 8-40CW drawings (late CSXT versions) and Dash 8-44CW drawings
- Revised in Locomotive Phases section:
- GE AC4400CW phases
- Added Phase 1a3 (shifted previous 1a3 to 1a4)
- GE AC4400CW phases
2018-09-10
- Added in Photos section:
- 41 photos from 2018-05-02
- Revised in Photos section:
- Corrected glitch in links within results for Location search
- Revised in Locomotive Phases section:
- GE AC4400CW phases
- Added missing dates for Phases 1c2, 1c3 and 1d
- GE AC4400CW phases
2018-09-09
- Added in Photos section:
- 35 photos from 2018-04-28
- 1 photo from 2018-04-22
- 13 photos from 2018-04-12
- 17 photos from 2018-04-10
- 2 photos from 2018-04-03
2018-07-26
- Added in Locomotive Phases section:
- GE Dash 9 series phases (merged with detail variations of NS Dash 9-40CW's)
- Revised in Drawings/1:18 Undecorated section:
- Descriptions of GE Dash 9-40CW and Dash 9-44CW drawings
- Added phases
- Descriptions of GE Dash 9-40CW and Dash 9-44CW drawings
2018-06-01
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP38-2 drawings (MKT versions)
2018-04-21
- Revised CSS layout and styles to adjust for screen resolution
2018-03-28
- Added in Drawings/1:18 Undecorated section:
- 8 EMD SD70ACe drawings (KCS and KCSM Phase 2a, 2d2 and 2e1 versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD70ACe (UP Phase 2d1 right-side view)
- Revised piping ahead of air reservoirs
- EMD SD70ACe (UP Phase 2d1 right-side view)
2018-03-26
- Added in Drawings/1:18 Painted section:
- CREX #1328 (GE ES44AC)
- Added in Drawings/1:18 Undecorated section:
- 4 GE ES44AC drawings (CREX versions)
- Revised in Drawings/1:18 Undecorated section:
- All GE AC44C4M, AC44C6M and ES-series right-side views
- Revised door width/spacing under central air intake
- Added 2 holes below front cab sub-base door
- GE ES44AC drawings (IAIS Phase 2f2 version)
- Corrected order of 2 rear-most handrail stanchions (Phase 2f1 vs. 2f2)
- All GE AC44C4M, AC44C6M and ES-series right-side views
2018-02-25
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40 drawings (BN, BO, CO, IC, LN, PC, PRR and SP versions)
- Removed ballast plate above fuel tank (most versions)
- Revised fuel guage (LN versions)
- Removed inner sand lines (LN Phase 1a3 and 2b1 versions)
- EMD SD40 drawings (BN, BO, CO, IC, LN, PC, PRR and SP versions)
2018-02-17
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP40 drawings (WP versions)
2018-02-16
- Added in Drawings/1:18 Undecorated section:
- 5 GMD F40PH-2D drawings (as-built versions)
- Revised in Drawings/1:18 Undecorated section:
- Most GMD F40PH-2D drawings
- Removed stray pixel from behind left side inertial air intake (most left-side views)
- Corrected bolts under right side inertial air intake (all right-side views)
- Added rerailer supports near rear truck (as-modified versions only)
- Added sunshade bracket (as-modified versions only)
- Most GMD F40PH-2D drawings
- Revised in Drawings/1:18 Painted section:
- VIA #6407 (GMD F40PH-2D)
- Corrected bolts under right side inertial air intake
- Added rerailer supports near rear truck
- Added sunshade bracket
- VIA #6407 (GMD F40PH-2D)
2018-02-14
- Added in Drawings/1:18 Undecorated section:
- 6 EMD SD40 drawings (ATSF, CBQ and CGW versions)
- Fixed links to drawings in Drawings/1:28 section (previously had broken links to sub-pages, making drawings unavailable)
- Separated Drawing history section into four chronological pages (rather than a main page with three sub-pages)
- Added 1:28, late 1:36, late 1:55, and 1:220 sample drawings in Drawing history section
2018-02-12
- Revised in Drawings/1:18 Undecorated section:
- GMD F40PH-2D right-side views
- Added cab door lock
- GMD F40PH-2D right-side views
- Added in Drawings/1:18 Painted section:
- VIA #6407 (GMD F40PH-2D)
2018-02-10
- Added in Drawings/1:18 Undecorated section:
- 7 GMD F40PH-2D drawings (all versions as modified; VIA #6400 as rebuilt)
- Revised in Drawings/1:18 Undecorated section:
- Existing GMD F40PH-2D drawings
- Revised cables/pipes near rear steps
- Existing GMD F40PH-2D drawings
- Revised in Drawings/1:18 Painted section:
- VIA #6438 (GMD F40PH-2D)
- Revised cables/pipes near rear steps
- VIA #6438 (GMD F40PH-2D)
2018-02-06
- Added in Drawings/1:18 Undecorated section:
- 4 GMD F40PH-2D drawings (VIA units as rebuilt)
- Added in Drawings/1:18 Painted section:
- VIA #6438 (GMD F40PH-2D)
- Added drawing vs. photo comparison in Drawing Accuracy section
2018-01-31
- Added in Drawings/1:18 Undecorated section:
- 2 MLW RS-18 drawings (early PGE version)
2018-01-29
- Added in Drawings/1:18 Undecorated section:
- 12 MLW M-420 drawings (CN 3500-3529, all versions; CN 3530-3559, 3560-3579 as built; CN 3530-3559 as modified left-side views)
- Revised in Drawings/1:18 Undecorated section:
- All existing MLW M-420 right-side views (CN 3530-3559, 3560-3579 as modified)
- Slight revisions to cut-off valves and fittings in air piping
- Revised battery box covers (CN 3530-3559)
- Revised handbrake wheel notch (CN 3530-3559)
- All existing MLW M-420 right-side views (CN 3530-3559, 3560-3579 as modified)
2018-01-28
- Added in Drawings/1:18 Undecorated section:
- 2 MLW RS-10S drawings (PGE version)
- Revised in Drawings/1:18 Undecorated section:
- All existing MLW RS-10S and RS-18 drawings
- Added winterization duct ahead of radiator fan housing
- Reversed door handle orientation (RS-10S right-side views only)
- All existing MLW RS-10S and RS-18 drawings
2018-01-27
- Added in Drawings/1:18 Undecorated section:
- 4 covered hopper car drawings (ARI 3272 cu-ft Center Flow)
- Added in Drawings/1:18 Painted section:
- SHPX #432930 (ARI 3272 cu-ft Center Flow)
2018-01-20
- Added in Drawings/1:18 Undecorated section:
- 10 GE B30-7 drawings (CO versions)
2018-01-19
- Added in Drawings/1:18 Undecorated section:
- 14 GE B23-7 drawings (MP versions)
- 4 GE B30-7A drawings (MP versions)
- Revised in Drawings/1:18 Undecorated section:
- GE B30-7 left-side views (SCL Phase 2c and 2d versions)
- Added missing section of panel near front steps
- GE B30-7 left-side views (SCL Phase 2c and 2d versions)
2018-01-16
- Revised in Drawings/1:18 Undecorated section:
- GE B23-7 and B36-7 right-side views (ATSF and CR versions) - revised date marked as "2015-04-19" but I neglected to re-upload affected drawings at the time
- Revised battery box cover dimensions
- Corrected underframe above rear truck (Phase 1 versions)
- GE B23-7 and BQ23-7 right-side views (Phase 1 versions with dual sand lines only)
- Minor correction to sand line above right rear truck
- GE B30-7 (SLSF left-side view)
- Removed speed recorder from #3 axle
- GE B23-7 and B36-7 right-side views (ATSF and CR versions) - revised date marked as "2015-04-19" but I neglected to re-upload affected drawings at the time
2018-01-14
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP38-2 drawings (KCS versions)
- 4 EMD GP40-2 drawings (AWP/GA/WA and KCS versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2 drawings (Family Lines Phase 1b2 versions)
- Added ridge along top of inertial air intake
- EMD GP38-2 drawings (Family Lines Phase 2a2 through 2b2 versions)
- Corrected small transparency error under exhaust stacks
- EMD GP38-2 drawings (Family Lines Phase 1b2 versions)
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD40-2 (CR, Family Lines, MILW, MKT and MP versions)
- Standardized phases for EMD GP40-2 and SD40-2 drawings across all scales (in drawing lists but not in filenames)
2018-01-13
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP40-2 drawings (BM Phase 2a1 and DTI Phase 2b2 versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP40-2 drawings (DTI Phase 1a2 version)
- Removed extra bolt from exhaust stack housing
- EMD GP40-2 drawings (WP right-side views)
- Corrected transparency error near front coupler
- GMD GP40-2(W) and GP40-2L(W) drawings
- Removed extra bolt from exhaust stack housing
- Corrected minor line glitch on latches on first engine room door
- EMD GP40-2 drawings (DTI Phase 1a2 version)
- Revised in Drawings/1:18 Painted section:
- CN #9511 (GMD GP40-2L(W))
- Removed extra bolt from exhaust stack housing
- Corrected minor line glitch on latches on first engine room door
- DTI #224 (EMD GP38-2)
- DTI #6419 (EMD GP40-2)
- Removed extra bolt from exhaust stack housing - DTI #6419 only
- Corrected minor line glitch on latches on first engine room door (2017-09-27 undec. revision)
- Revised position of lift ring and flag holder at rear of long hood (2017-09-27 undec. revision) - DTI #224 only
- Corrected Nathan M3 horn (2016-10-19 undec. revision)
- Added upper ridge on inertial air intakes (2015-03-29 undec. revision)
- CN #9511 (GMD GP40-2L(W))
- Added in Locomotive Dimensions page:
- MLW RS-10 dimensions
2018-01-12
- Added in Drawings/1:18 Undecorated section:
- 4 GE AC44C6M drawings (NS 4000-4003)
- 2 MLW RS-10 drawings (CN 3074-3093)
- Revised in Drawings/1:18 Undecorated section:
- GE AC44C6M drawings (NS 4004-4074)
- Removed second cab side mirror
- MLW RS-18 drawings
- Added traction motor cables passing through frame (right-side views)
- Revised dynamic brakes
- Revised roof panel bolts
- Slightly relocated front hood grabirons (CN versions, left-side views only)
- GE AC44C6M drawings (NS 4004-4074)
- Added in Locomotive Dimensions page:
- MLW RS-18 dimensions
2018-01-11
- Added in Drawings/1:18 Undecorated section:
- 4 MLW RS-18 drawings (CN 3671-3676)
- Revised in Drawings/1:18 Undecorated section:
- Most MLW RS-18 drawings
- Added missing pipe in front right underframe (except versions with lightweight trucks)
- Changed coupler pockets from fabricated to cast (early versions)
- Most MLW RS-18 drawings
- Added in Locomotive Phases section:
- MLW RS-10, RS-18 Phases (includes history; RS-18 phases remain to be added)
- Revised in Locomotive Phases section:
- ALCO/MLW C-424 Phases
- EMD SD70ACe Phases
- Added dimensional information (copied from Dimensions page)
- Added in Locomotive Dimensions page:
- MLW M-420 dimensions
- Updated Locomotive Dimensions page
- Created separate sections for each locomotive model
- Added images with dimensions directly in each page (in place of text links)
2018-01-10
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2 drawings (SCL Phase 1b2 version)
- Added rear Mars light
- Changed front Gyralite to Mars light
- EMD GP40-2 drawings (SCL Phase 2c1 version)
- Removed front Gyralite
- Removed cab visors/sunshades
- Revised antenna
- EMD GP38-2 drawings (SCL Phase 1b2 version)
2018-01-09
- Added in Drawings/1:18 Undecorated section:
- 4 MLW RS-18 drawings (CP versions)
2018-01-08
- Added in Drawings/1:18 Undecorated section:
- 8 MLW RS-18 drawings (CN versions)
2018-01-02
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40 drawings (BO/CO and PRR Phase 1a2 through 1b2 left-side views)
- Added missing section of bell
- EMD SD40 drawings (BO/CO and PRR Phase 1a2 through 1b2 left-side views)
2018-01-01
- Added in Drawings/1:18 Undecorated section:
- 4 ALCO C-425 drawings (NW and PRR Phase 1 versions)
- 2 EMD SD60 drawings (late UP version)
- Added in Drawings/1:18 Painted section:
- CR #1630 (EMD GP15-1)
Past Updates - 2017
2017-12-31
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO C-425 drawings (EL version)
- 2 EMD SD60 drawings (early UP version)
- Revised in Drawings/1:18 Undecorated section:
- ALCO C-425 drawings (NH version)
- Corrected error in position of brake chain (conductor's side)
- Revised grabirons and lift rings behind radiators
- Added pipe behind fuel tank
- Removed small vent at front of radiator compartment (engineer's side only)
- Added hinged panels on long hood end
- ALCO C-430 drawings
- Added hinged panels on long hood end
- Revised radiator section (NYC version)
- EMD SD60 drawings
- Revised angled sheet behind bottom step (CNW and EMDX versions)
- Revised piping behind fuel tank
- ALCO C-425 drawings (NH version)
2017-12-30
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD50 drawings (BO version)
- 2 GE AC4400CW drawings (UP Phase 1a1 version)
- Revised in Locomotive Phases section:
- GE AC4400CW Phases
- Added change of rear hood intakes from Phase 1a1 to 1a2
- GE AC4400CW Phases
2017-12-29
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD50 drawings (DRGW version)
2017-12-22
- Added in Drawings/1:18 Undecorated section:
- 6 EMD SD60M drawings (BN versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD60M and SD60I drawings
- Added circular hatches to long hood end
- EMD SD60M and SD60I drawings
- Added in Locomotive Phases section:
- EMD SD60M, SD60I phases
2017-12-19
- Added in Drawings/1:18 Undecorated section:
- 3 EMD SD70ACe drawings (BNSF and MRL Phase 2f versions)
2017-12-17
- Added in Drawings/1:18 Undecorated section:
- 7 EMD SD70ACe drawings (BNSF versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD70ACe and SD70M-2 drawings
- Removed angled brace behind end plates (Phase 2e2 and earlier units)
- Revised cables/pipes under back of cab (Phase 2d1 and later right-side views)
- EMD SD70M-2 (CN Phase 2e3 right-side view)
- Revised handbrake (changed from Phase 2e2 to 2e3)
- All EMD SD70ACe and SD70M-2 drawings
- Updated in Locomotive Phases section:
- EMD SD70M-2, SD70ACe phases
- Added Phase 2e3
- EMD SD70M-2, SD70ACe phases
2017-12-16
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD60I drawings (early CR version)
- 4 EMD SD60M drawings (CR versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD60I drawings
- Revised fuel tank supports
- Revised fuel tank vent pipe
- Added pollution collector tank on rear of fuel tank
- Removed pixel error on right side handrail behind cab (right-side view only)
- Added missing grabiron above windshield (right-side view only)
- EMD SD60I drawings
2017-12-12
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 right-side views (Family Lines Phase 2b1 and 2b2 versions)
- Removed pixel error on front radiator fan
- EMD SD60I right-side view
- Added window and revised corners on nose door
- EMD SD40-2 right-side views (Family Lines Phase 2b1 and 2b2 versions)
2017-12-10
- Added Site History section
- Added in Photos section:
- 36 photos from 2017-10-05 (Exporail)
- 29 photos from 2017-09-20 (CMQ)
- 2 photos from 2017-07-18 (Exporail)
- Revised in Photos section:
- Consolidated and revised photo locations
- Changed Location search (in "Advanced Search" and "Photo Search Results" pages) from keyword to option list
- Changed text list of photo search results from plain text to tabular format
2017-11-19
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD45 drawings (SP version)
2017-11-11
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD45 and SD45-2 drawings
- Revised central hood door spacing
- EMD SD70ACe right-side views (Phase 2f versions)
- Relocated hole below handbrake wheel
- EMD SD70M-2 left-side views
- Corrected minor glitch in front truck traction pin
- All EMD SD45 and SD45-2 drawings
2017-11-10
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD60I drawings
2017-11-03
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP9 drawings (IC Phase 3c version)
- 10 EMD GP20 drawings (CBQ, SP and SSW versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP18 drawings (IC versions)
- EMD GP20 drawings (EMDX and UP versions)
- Lower cab side mirrors/wind deflectors
2017-11-02
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP9 drawings (LV version)
2017-11-01
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP18 drawings (early IC version)
- 4 EMD GP20 drawings (EMDX and UP versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP18 drawings
- Added pilot-mounted footboard handrail
- All EMD GP18 drawings
2017-10-31
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP20 drawings (GN versions)
2017-10-30
- Added in Drawings/1:18 Undecorated section:
- 7 EMD GP18 drawings (CNW, LV and RI versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP11 drawings (IC 8720 only)
- EMD GP18 drawings
- Revised rear headlight
- Removed bottom hatches on long hood end (except GP11)
- Relocated fuel cutoff switch (farther rearward)
- Revised underframe shape (longer sloped sections toward middle with thicker bottom plate)
- Added traction motor cables in middle underframe
- Added cooling water drain (above left rear truck)
- Revised step kick plates
- Lower end handrail mounting points
2017-10-28
- Added in Drawings/1:18 Undecorated section:
- 10 GMD SD40 drawings (CN 5082 and later versions)
- Revised in Drawings/1:18 Undecorated section:
- GMD SD40 drawings (CN versions)
- Revised brake system (Dofasco Flexicoil trucks)
- Added battery charge receptacle on right side underframe behind cab
- Relocated horn to recess at front of cab
- Revised speed recorder cable
- Added drip rail above cab side windows
- GMD SD40 drawings (CN versions)
2017-10-25
- Added in Drawings/1:18 Undecorated section:
- 1 GE ES44C4 drawing (BNSF late Phase 2f2 left-side view)
2017-10-17
- Added in Drawings/1:18 Undecorated section:
- 4 GE B36-7 drawings (SBD versions)
2017-10-16
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 drawings (SP/SSW versions)
- Added circular hatch on long hood end
- Removed long hood number boards
- EMD SD40-2 drawings (CR versions)
- Added/relocated short hood top and side grabirons
- EMD GP35 drawings (SP/SSW versions)
- Added in Drawings/1:18 Painted section:
- SP #6640 (EMD GP35)
- Revised in Drawings/1:18 Painted section:
- CR #6381 (EMD SD40-2)
- Added/relocated short hood top and side grabirons
- SP #9724 (EMD GP60)
- Marginally darker scarlet red
- Revised cab side numbers
- CR #6381 (EMD SD40-2)
- Added in Logos section:
- BNSF Heritage II lettering
- CEFX lettering and numbers (font match)
- CN cab numbers 1 (font match)
- CSXT numbers (font match)
- DMVW lettering and numbers (font match)
- Family Lines logo
- GTW cab numbers (font match)
- SPSF lettering
- UP cab numbers
- UP flag logo
- Revised in Logos section:
- SP Cab numbers
- Marginally thinner weight
- SP Cab numbers
2017-10-13
- Added in Drawings/1:18 Painted section:
- CN #5512 (GMD SD60F)
2017-10-11
- Added in Drawings/1:18 Undecorated section:
- 4 GMD SD40 drawings (CN versions)
- 4 EMD SD45 drawings (EL versions)
2017-10-08
- Added in Drawings/1:18 Undecorated section:
- 2 GMD SD40 drawings (CN version)
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD40 and SD45 drawings
- Corrected minor line glitch on latches on first engine room door (error affected most second-generation EMD drawings from before 2017)
- Revised bottom flange of dynamic brake fans (if equipped)
- Revised bottom flange of radiator fans (SD45 only)
- Removed extra bolt on exhaust stack housing (SD40 right-side views only)
- All EMD SD40 and SD45 drawings
- Added in Drawings/1:18 Painted section:
- GTW #5836 (EMD GP38-2)
2017-10-07
- Added in Drawings/1:18 Undecorated section:
- 10 EMD GP30 drawings (CEI, CNW and LN versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD/GMD GP26 and GP30 drawings
- Revised bottom hatches on hood ends
- Removed bottom hatch latch hooks on short hood
- Revised cab sun shade and mirrors (GMO versions only)
- EMD GP35 drawings (LN right-side views)
- Removed hand brake chain
- All ALCO C-430 and MLW C-424 drawings
- Revised dimensions of dynamic brake hatch
- All EMD/GMD GP26 and GP30 drawings
2017-10-04
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP15-1 drawings (CNW and SLSF versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP15-1 and GP15AC drawings
- Revised central hood door spacing
- Added details behind central air intake
- Removed white space around rear-most handrail stanchion
- All EMD GP15-1 and GP15AC drawings
2017-10-01
- Added section of Detail Photo Galleries in Photos section
2017-09-30
- Added in Drawings/1:18 Undecorated section:
- 21 EMD GP38-2 drawings (AWP, CNW, CRR, GA, LN and SCL versions)
- 2 GE AC44C4M drawings
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2 drawings
- Removed extra lift ring behind dynamic brake fan (most units with dynamic brakes)
- Corrected glitch in bottom rear step (Phase 1a-1b right-side views)
- EMD GP40-2 (LN and SCL Phase 2c1 left-side view)
- Moved bell from underframe to hood
- Removed left front speed recorder cable
- GE Dash 9-40C and Dash 9-44CW left-side views (ATSF, CNW, SP and UP versions)
- Removed incorrect line under bell
- EMD GP38-2 drawings
2017-09-29
- Added in Drawings/1:18 Undecorated section:
- 3 GE AC44C6M drawings (NS versions)
- Added in Drawings/1:18 Undecorated section:
- GE Dash 9-40C left-side view
- Added missing handrail stanchion clips on 2 middle stanchions
- Removed fuel tank seam
- GE Dash 9-40C left-side view
2017-09-27
- Added in Drawings/1:18 Undecorated section:
- 8 EMD GP38-2 drawings (LN and SLSF versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP38-2, GP40-2 and SD38-2 drawings
- Revised position of lift ring and flag holder at rear of long hood (except early-production units)
- Corrected minor line glitch on latches on first engine room door (error affected most second-generation EMD drawings from before 2017)
- Revised contour at front of dynamic brake housing (GP38-2 only)
- All EMD GP38-2, GP40-2 and SD38-2 drawings
- Revised in Drawings/1:18 Painted section:
- BO #4331 (EMD GP40-2)
- CR #3400 (EMD GP40-2)
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door
- Updated in Locomotive Phases section:
- EMD GP38-2 Phases
- Converted to tabular format
- Added model history details (based on GP40-2 phases)
- Removed Phase 1d
- EMD GP38-2 Phases
2017-09-26
- Added in Drawings/1:18 Undecorated section:
- GE AC4400CW, GECX version (Added GECX numbers to existing drawings of UP units)
- Revised in Drawings/1:18 Undecorated section:
- Most EMD SD40-2 drawings (Phase 1b1 and later units)
- Revised position of lift ring and flag holder at rear of long hood
- Removed rear flag holder (ATSF versions only)
- Corrected minor line glitch on latches on first engine room door (error affected most second-generation EMD drawings from before 2017; except drawings already corrected)
- Most EMD SD40-2 drawings (Phase 1b1 and later units)
- Added in Drawings/1:18 Painted section:
- CR #6381 (EMD SD40-2)
- LN #8158 (EMD SD40-2)
- Revised in Drawings/1:18 Painted section:
- BN #8004 (EMD SD40-2)
- BNSF #8010 (EMD SD40-2)
- Revised position of lift ring and flag holder at rear of long hood
- Corrected minor line glitch on latches on first engine room door
- Revised MU hose pockets on pilots
2017-09-25
- Added in Drawings/1:18 Undecorated section:
- 26 EMD SD40-2 drawings (CR, CRR, LN, OWTX and SCL versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 drawings (ATSF, BN, NW and MKT Phase 2a2 through 2b2 versions)
- Corrected minor line glitch on latches on first engine room door (error affected most second-generation EMD drawings from before 2017)
- Revised MU hose pockets on pilots
- EMD SD40-2 drawings (BO version)
- Changed front classification lights from ATSF/BN version to standard version
- EMD SD40-2 drawings (ATSF, BN, NW and MKT Phase 2a2 through 2b2 versions)
2017-09-23
- Slightly revised styles and HTML code to improve site accessibility
2017-09-21
- Added in Drawings/1:18 Painted section:
- CMQ #9020 (GMD SD40-2F)
2017-09-20
- Added in Drawings/1:18 Painted section:
- CEFX #1043 (GE AC4400CW)
- UP #8424 (EMD SD70ACe)
- Revised in Drawings/1:18 Undecorated section:
- GE AC4400CW drawing (CEFX 1026-1059 left-side view)
- Added grabiron behind cab
- GE AC4400CW drawing (CEFX 1026-1059 left-side view)
2017-09-19
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD70M-2 and SD70ACe drawings
- Revised truck traction pin (near center axle on trucks)
- Added minor truck details (bolts under axles and pins at radial-steering arm ends)
- Smaller radiator fan diameter and spacing, fans moved rearward
- Added missing section of air pipe behind front steps (left-side views)
- Removed seam at rear of cab (left-side views, Phase 2a through 2e1 with no isolated cab)
- Revised inverter cabinet grills (SD70ACe left-side views only)
- All EMD SD70M-2 and SD70ACe drawings
2017-09-03
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP30 drawings (CBQ versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 and GP40 drawings (CBQ versions)
- Corrected minor line glitch on latches on first engine room door (error present in most second-generation EMD drawings from before 2017)
- Changed cab light from Gyralite to Mars light
- EMD GP35 and GP40 drawings (CBQ versions)
2017-09-02
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP30 drawings (DRGW versions)
- 6 EMD GP35 drawings (DRGW versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP26, GP30 and GP30B drawings
- Corrected minor line glitch on latches on first engine room door (error present in most second-generation EMD drawings from before 2017)
- Revised coupler pockets
- Corrected mismatched hood seams behind conductor's side inertial air intake (except GP26)
- Revised center radiator fan (changed to cap-top instead of open-top)
- All EMD GP26, GP30 and GP30B drawings
2017-08-31
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP28 drawings (KOG and MSC versions)
- 4 EMD GP38 drawings (GMO and MP versions)
- 6 EMD GP38AC drawings (GMO, GTW and IC versions)
2017-08-23
- Added in Drawings/1:18 Undecorated section:
- 6 MLW M-420 drawings (CN 3530-3579 as modified)
2017-07-09
- Continued addition of re-sampled versions of older analog recordings
- SLR 3209 from 2002-07-22
- SLR 3209 from 2002-07-24
- SLR 3209 from 2002-08-03
- SLR (LLPX) 3002 from 2002-06-04
- SLR (LLPX) 3202 from 2002-05-30
- SLR (LLPX) 3203 from 2002-04-27
2017-07-04
- Continued addition of re-sampled versions of older analog recordings
- LLPX 2256 from 2001-03-21
- MMA 3603 from 2006-04-30
- SLQ 3512 from 2000-08 (3)
- SLQ 3512 from 2000-09
- SLQ 3517 from 2001-05
- SLQ 3519 from 2000-08
2017-07-03
- Continued addition of re-sampled versions of older analog recordings
- LLPX 2232 from 2000-10 (1)
- LLPX 2232 from 2000-10 (2)
- LLPX 2235 from 2001-03
- LLPX 2235 from 2001-06-10
- LLPX 2235 from 2001-09-08
- LLPX 2238 from 2001-05
- LLPX 2238 from 2001-11
- LLPX 2246 from 2001-05
- LLPX 2247 from 2001-07
- LLPX 2248 from 2001-08-22
2017-07-02
- Added re-sampled versions of older analog recordings (re-balancing sound to be comparable to digital audio recorder and reducing the effect of the mic limiter; continuing work first started in 2015)
- CN 5359 from 2003-07-06
- CN 9524 from 2001-01
- GSCX 3702 from 2000-09
- GSCX 3717 from 2000-11
- LLPX 2231 from 2000-11-23
- SLQ 3512 from 2000-08 (1)
- SLQ 3512 from 2000-08 (2)
- SLQ 8749 from 2000-09
- SLR (LLPX) 3000 from 2000-08
- SLR (LLPX) 3003 from 2003-02-07
2017-07-01
- Revised in Drawings/1:18 Undecorated section:
- EMD SD60 drawings
- Removed angled braces under front walkway extension (CNW version)
- Corrected latches on first and last tall hood doors
- EMD SD60 drawings
2017-06-05
- Added in Drawings/1:18 Undecorated section:
- 10 GE C30-7 drawings (ATSF Phase 2c, 2d versions)
- 4 GE Dash 8-40C drawings (CNW versions)
- Revised in Drawings/1:18 Undecorated section:
- GE Dash 8-40C drawings (late CSXT and all NS variations) and Dash 9-40C drawings
- Changed top of short hood from sloped to flat
- GE Dash 8-40C drawings (late CSXT and all NS variations) and Dash 9-40C drawings
- Updated in Locomotive Phases section:
- GE Dash 8-40C, Dash 8-40CW Phases
- Added phases for Dash 8-40C
- GE Dash 8-40C, Dash 8-40CW Phases
2017-05-31
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP35 drawings (CNW Phase 1a1, 1a2 versions)
2017-05-30
- Added in Drawings/1:18 Undecorated section:
- 7 EMD GP35 drawings (PRR versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40 drawings (PRR versions)
- Removed rear flag holder
- EMD SD40 drawings (PRR versions)
2017-05-20
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD45 drawings (NW Phase 2a1 and 2b1 versions)
- Revised in Drawings/1:18 Undecorated section:
- Most EMD SD45 drawings
- Removed dynamic brake roof vent (Phase 2b1 and earlier units, where present)
- Revised fuel cutoff switch (NW Phase 1a3 and 1b2 units)
- Revised handrail stanchion at rear of walkway blower duct (CNW, EMDX, PRR and SCL left-side views)
- Most EMD SD45 drawings
- Updated in Locomotive Phases section:
- EMD SD38, SD39, SD40, SD45 Phases
- Added engine roof vent appearance starting in Phase 2b2
- EMD SD38, SD39, SD40, SD45 Phases
2017-05-18
- Added in Photos section:
- 48 photos from 2017-05-13 (CMQ)
- 10 photos from 2017-05-05 (CBNS)
- 33 photos from 2017-05-04 (CBNS)
- 24 photos from 2017-03-03 (CMQ, SLR)
2017-05-16
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP40 drawings (NW Phase 1b version)
- 4 EMD SD45 drawings (NW versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35, GP38AC, GP40, SD40 and SD45 drawings (NW versions only)
- Added grabiron at top of short hood
- Revised fuel tank bracket (GP40 left-side view only)
- EMD SD40 (BO/CO left-side view)
- Added missing speed recorder cable
- EMD GP35, GP38AC, GP40, SD40 and SD45 drawings (NW versions only)
- Updated in Locomotive Phases section:
- EMD GP38, GP39, GP40 Phases
- Added Phase 1b (Phase 1 units with later-style MU receptacle housing)
- Removed Phase 2a1; previous Phase 2a2 and 2a3 became 2a1 and 2a2 respectively (previous distinction between Phase 2a1 and 2a2 was addition of electrical cabinet air filter box following the appearance of other Phase 2 features, which appears to affect few if any units)
- EMD GP38, GP39, GP40 Phases
2017-04-22
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP40-2 drawings (SCL Phase 2c1 version)
- Revised in Drawings/1:18 Painted section:
- SCL BQ23-7 #5134
- Revised hood lettering
- SCL BQ23-7 #5134
- Revised in Logos section:
- Family Lines lettering (based on original specifications instead of modified font)
2017-03-25
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38 drawings (BO 3800-3849, CO 3850-3899) and EMD GP40 drawings (BO 3700-3739)
- Added circular panels hood ends
- EMD GP38 drawings (BO 3800-3849, CO 3850-3899) and EMD GP40 drawings (BO 3700-3739)
2017-03-22
- Added in Drawings/1:18 Undecorated section:
- 22 EMD GP38-3 drawings (NS GP50 rebuilds)
- Added in Locomotive Phases section:
- EMD GP38-3 Phases
2017-03-20
- Added in Drawings/1:18 Undecorated section:
- 3 EMD SD40-2 drawings (LN Phase 1a2 version)
2017-03-19
- Added in Drawings/1:18 Undecorated section:
- 14 EMD SD45 drawings (BN, PC, PRR Phase 2a2 and SCL versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40 drawings (BN version)
- Added cab door stops
- EMD SD45 drawings (CNW and PRR Phase 1b1 versions)
- Narrower cab sub-base ribs
- Cab side wind deflectors (PRR version)
- EMD SD40 drawings (BN version)
2017-03-18
- Added in Drawings/1:18 Undecorated section:
- 8 EMD SD40 drawings (SOU and SP versions)
- 5 EMD SD45 drawings (SOU versions)
- 1 GE ES44AC drawing (IAIS Phase 2d1 version)
- Revised in Drawings/1:18 Undecorated section and Drawings/1:36 Undecorated section:
- GE ES44AC drawings (UP Phase 1f2 version)
- Corrected radiators and intakes (previously incorrectly drawn as Phase 2a1)
- GE ES44AC drawings (UP Phase 1f2 version)
- Updated in Locomotive Phases section:
- GE ES-series phases
- Revised details concerning dynamic brake intakes and outlets
- Relabelled Phase 1g as Phase 1f2 (since it does not apply to DC models)
- GE ES-series phases
2017-03-13
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD40 drawings (KCS Phase 1b1 and LN Phase 1a3 versions)
2017-03-10
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD SD40
- EMD SD40R
- EMD SDP40
- GMD SD40
- GMD SD40u
- NSC smooth-side boxcars
2017-03-09
- Added in Drawings/1:18 Undecorated section:
- 2 rolling stock drawings (NSC 6400 cu-ft)
2017-02-26
- Added in Drawings/1:18 Undecorated section:
- 6 GE ES44AC drawings (IAIS versions)
2017-02-25
- Added in Drawings/1:18 Undecorated section:
- 5 GE ES44AC drawings (KCS and KCSM Phase 2f1 and 2f2 versions, UP Phase 2d1 right-side view)
- 1 GE ES44C4 drawing (BNSF Phase 2d1 right-side view)
- 1 GE ES44DC drawing (BNSF Phase 2d1 right-side view)
- Revised in Drawings/1:18 Undecorated section:
- GE Dash 9-44CW drawings (ATSF, CNW, SP and UP versions) and Dash 9-44CWL left-side view
- Replaced 2 X-panels ahead of front air intake with single larger X-panel
- GE Dash 9-44CW drawings (ATSF, CNW, SP and UP versions) and Dash 9-44CWL left-side view
- Updated in Locomotive Phases section:
- GE ES-series phases
- Added Phase 2d1
- GE ES-series phases
2017-02-24
- Added in Drawings/1:18 Undecorated section:
- 14 GE ES44AC drawings (UP Phase 2a through 2f2 versions)
2017-02-23
- Added in Drawings/1:18 Undecorated section:
- 6 GE ES44AC drawings (FSRR and FXE versions)
- Revised in Drawings/1:18 Undecorated section:
- GE ES-series drawings (versions with 4 cab side windows, except early CN versions)
- Lowered cab sunshade location
- GE ES44AC drawings (CSXT Phase 2c version)
- Removed second cab side mirror
- GE ES44DC (CSXT Phase 1c left-side view)
- Added hinged panel ahead of rear jacking pad
- GE ES44AC drawings (BNSF Phase 1d, 1f and 1g left-side views)
- Removed hinged panel ahead of rear jacking pad
- GE ES-series drawings (versions with 4 cab side windows, except early CN versions)
2017-02-22
- Added in Drawings/1:18 Undecorated section:
- 2 GE ES44C4 drawings (BNSF Phase 2f2 version)
- Corrected numbering for 1:36 and 1:18 GE ES44AC drawings (BNSF Phase 1c, 1d, 2c and 2d versions and NS Phase 2f2 versions)
2017-02-20
- Added in Drawings/1:18 Undecorated section:
- 4 GE ES44AC drawings (CN versions)
- 8 GE ES44C4 drawings (BNSF Phase 2f and FEC versions)
- Updated in Locomotive Phases section:
- GE ES-series phases
- Added Phase 2f2
- GE ES-series phases
2017-02-18
- Added in Drawings/1:18 Undecorated section:
- 5 GE ES44C4 drawings (BNSF Phase 2d and 2e versions)
- Revised in Drawings/1:18 Undecorated section:
- All GE Dash-9, AC4400CW and ES-series right-side views
- Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion)
- All GE Dash-9, AC4400CW and ES-series right-side views
2017-02-17
- Added in Drawings/1:18 Undecorated section:
- 4 GE ES44AC drawings (NS Phase 2f versions)
- Revised in Drawings/1:18 Undecorated section:
- GE ES44AC drawings (CSXT and NS Phase 2b through 2e versions)
- Corrected dynamic brake outlet spacing (left-side views)
- Revised air piping between air reservoirs (NS right-side views)
- Revised truck castings (NS Phase 2e versions only)
- GE ES44AC drawings (CSXT and NS Phase 2b through 2e versions)
- Updated in Locomotive Phases section:
- GE ES-series phases
- Added truck detail changes (Phase 2d-2f)
- GE ES-series phases
2017-02-15
- Updated in Locomotive Phases section:
- GE ES-series phases
- Added Phase 2f
- Added background information
- GE ES-series phases
2017-02-13
- Added in Drawings/1:18 Undecorated section:
- 4 GE Dash 8-40CW drawings (UP versions)
- 2 GE Dash 8-41CW drawings (UP version)
- Revised in Drawings/1:18 Undecorated section:
- All GE Dash 8-40CW, Dash 8-41CW and Dash 8-44CW drawings
- Removed clamps from middle handrail stanchions (above fuel tank)
- Added seam to right rear of fuel tank
- Removed erroneous line on right rear top step (some versions with tall steps)
- All GE Dash 8-40CW, Dash 8-41CW and Dash 8-44CW drawings
2017-02-12
- Added in Drawings/1:18 Undecorated section:
- 4 GE Dash 8-40C drawings (CSXT versions)
2017-02-11
- Added in Drawings/1:18 Undecorated section:
- 4 GE Dash 8-44CW drawings
- 2 GE Dash 9-40C drawings
- Revised in Drawings/1:18 Undecorated section:
- GE Dash 8-41CW drawings (ATSF version)
- Short hood grabirons
- GE Dash 8-41CW drawings (ATSF version)
- Updated in Locomotive Phases section:
- GE Dash 8-40C, Dash 8-40CW phases
- Converted to tabular format
- Added Phases 2a and 2b
- Added production dates
- Added information about Dash 8-41CW and Dash 8-44CW
- GE Dash 8-40C, Dash 8-40CW phases
2017-02-10
- Added in Drawings/1:18 Undecorated section:
- 4 GE Dash 9-44CW drawings (ATSF versions)
- Revised in Drawings/1:18 Undecorated section:
- GE AC4400CW drawings (Phase 2a1 and earlier) and Dash 9-44CW drawings (CNW, SP and UP versions)
- Revised box behind front left/right rear top corner step
- Modified steps to be individually attached in step well (Dash 9-44CW and Phase 1a1 through 1b AC4400CW only)
- GE AC4400CW drawings (Phase 2a1 and earlier) and Dash 9-44CW drawings (CNW, SP and UP versions)
2017-02-09
- Added in Drawings/1:18 Undecorated section:
- 2 GE Dash 9-44CW drawings (UP version)
2017-02-08
- Added in Drawings/1:18 Undecorated section:
- 6 GE Dash 9-44CW drawings (CNW and SP versions)
- Revised in Drawings/1:18 Undecorated section:
- GE AC4400CW drawings
- Narrower 2 rear intakes on conductor's side below radiators (except versions with taller rearmost intake)
- Removed truck yaw dampers and brackets on CNW and SP versions and UP Phase 1b through 1c2 versions
- Removed truck yaw dampers (but with brackets installed) on UP Phase 1d through 2a1 versions
- Revised front traction motor cable bracket (behind where front yaw damper was located)
- Corrected underframe line behind front fuel filler (CNW and SP right-side views)
- Removed electronic fuel gauge and relocated fuel cut-off switch (CNW version)
- Added light under cab (CNW version)
- Added empty handbrake chain bracket to front right truck (all versions with Hi-Ad trucks)
- GE Dash 9-40CW, Dash 9-44CW, ES40DC, ES44DC, ES44AC right-side views (versions with Hi-Ad trucks and standard handbrake chain)
- Added empty handbrake chain bracket to front right truck
- All GE Dash 9-40CW, Dash 9-44CW and Dash 9-44CWL left-side views
- Corrected location of hinges on first 2 hood doors under front air intake
- Reversed hinge/latch position of first 2 hood doors (Dash 9-44CWL only)
- GE AC4400CW drawings
2017-02-06
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD70ACe drawings (UP Phase 2a version)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD70ACe drawings (both sides for UP Phase 2c drawings; left-side views for others)
- Relocated traction motor cables above rear truck
- Minor revisions to cables above front truck
- Minor correction to rear edge of panel behind inverter cabinet (below grabirons)
- First hood door on left side changed from bolted to hinged (UP Phase 2c and 2d1 versions only)
- Revised truck casting text and air dryer location (UP Phase 2c version only)
- EMD SD70ACe drawings (both sides for UP Phase 2c drawings; left-side views for others)
2017-02-05
- Added in Drawings/1:18 Painted section:
- BNSF #5601 (GE AC4400CW)
- Revised in Drawings/1:18 Undecorated section:
- GE AC4400CW drawings (BNSF left-side views)
- Shorter rearmost hood door intake
- GE AC4400CW drawings (BNSF left-side views)
2017-02-04
- Added in Drawings/1:18 Undecorated section:
- 10 EMD GP10 drawings (IC Phase 3a versions)
- 2 GE AC4400CW drawings (CNW version)
- Revised in Drawings/1:18 Undecorated section:
- GE AC4400CW drawings (SP and UP Phase 1a through 1e versions)
- Revised batten strip behind cab on left
- GE AC4400CW drawings (SP and UP Phase 1a through 1e versions)
2017-02-01
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD F59PH
- EMD F59PHI
- EMD F69PH-AC
- EMD SD80MAC
- EMD SD90MAC series
2017-01-31
- Added in Drawings/1:18 Undecorated section:
- 3 GE AC4400CW drawings (SP Phase 1a2 versions)
2017-01-30
- Added in Drawings/1:18 Undecorated section:
- 1 GE Dash 9-40CW drawing (NS 8932-9008 right-side view; previously grouped with 9009-9128)
- 8 GE AC4400CW drawings (SP Phase 1a3 version; UP Phase 1b and 1c1 versions)
- Revised in Drawings/1:18 Undecorated section:
- 1 GE Dash 9-40CW drawing (NS 8889-8931 right-side view)
- Added angled panel behind right-side radiator intake
- 1 GE Dash 9-40CW drawing (NS 8889-8931 right-side view)
- Updated in Locomotive Phases section:
- GE Dash 9-40CW Phases
- Added production dates
- GE AC4400CW Phases
- Added Phases 1a1, 1a2 and 1c1
- GE Dash 9-40CW Phases
- Continued transfer of 1:55 drawings from old pages to drawing search:
- EMD FT
- EMD F3, F7, F9 series
- EMD FL9
- EMD E8, E9 series
- EMD SD35
- EMD SD38
- EMD SD38-2
- EMD SD39
2017-01-29
- Added in Drawings/1:18 Undecorated section:
- 10 GE AC4400CW drawings (FSRR, KCS and TFM versions; UP Phase 1c1, 1d and 1e1 versions)
2017-01-28
- Added in Drawings/1:18 Undecorated section:
- 4 GE AC4400CW drawings (UP Phase 1e2 versions)
2017-01-27
- Added in Drawings/1:18 Undecorated section:
- 12 GE AC4400CW drawings (CEFX, CSXT and FXE versions)
2017-01-26
- Added in Drawings/1:18 Undecorated section:
- 2 GE AC4400CW drawings (UP Phase 1g2 and 2a1 versions)
- Updated in Locomotive Phases section:
- GE AC4400CW Phases
- Added subphases of 1g and 2a
- Added additional minor details
- GE AC4400CW Phases
- Changed drawing list pages in Drawings/1:18 Undecorated section (undecorated by type) so that links to phases are model-specific (rather than linking to the main Phases page)
2017-01-25
- Added in Drawings/1:18 Undecorated section:
- 4 GE AC4400CW drawings (UP Phase 1g versions)
- Revised in Drawings/1:18 Undecorated section:
- All GE Dash-8, Dash-9, AC and ES locomotives with the wide-nosed cab
- Revised cab side window size and location (slightly shorter for 4 windows, slightly taller for 3 windows; moved slightly upward)
- Revised sunshade (early NS ES40DC variations only)
- Added 4 holes behind left front jacking pad (AC4400CW and ES-series only)
- All GE Dash-8, Dash-9, AC and ES locomotives with the wide-nosed cab
- Revised in Drawings/1:18 Painted section:
- AMTK #505 (GE Dash 8-32BWH)
- CDTX #2052 (GE Dash 8-32BWH)
- Revised cab side window size and location
2017-01-24
- Added in Drawings/1:18 Undecorated section:
- 5 GE AC4400CW drawings (UP Phase 2b and 2c versions)
- Updated in Locomotive Phases section:
- GE AC4400CW Phases
- Converted to tabular format
- Added subphases of 1c and 1e
- Added phase production dates
- Added introduction and background information
- GE AC4400CW Phases
2017-01-23
- Added in Drawings/1:18 Undecorated section:
- 9 GE AC4400CW drawings (BNSF and UP versions)
- Revised in Drawings/1:18 Undecorated section:
- All GE Dash 9-40CW and some GE Dash 9-44CW left-side views
- Fuel tank seam (Dash 9-40CW variations from NS 9129 to 9811)
- Piping behind fuel tank (except CN versions with external pollution collector tank)
- GE Dash 9-44CW, ES44AC and ES44DC right-side views
- Revised piping between air reservoirs (BNSF and CN versions with no air dryer only)
- Corrected uncoupling lever error above plow (All ES44AC and ES44DC variations with standard-sized plow, except CN versions)
- All GE Dash 9-40CW and some GE Dash 9-44CW left-side views
2017-01-21
- Added in Drawings/1:18 Undecorated section:
- 8 GMD SD40-2(W) drawings (Phase 1a2 and 1a3 versions)
- Revised in Drawings/1:18 Undecorated section:
- GMD SD40-2 drawings (CP Phase 2a and 2b versions)
- Removed casting hole from jacking pads
- GMD SD40-2(W) drawings (Phase 1a1 versions)
- Revised handbrake chain with pulley (left-side views)
- Added ditch light brackets (as-built versions)
- GMD SD40-2 drawings (CP Phase 2a and 2b versions)
- Added in Locomotive Phases section:
- GMD SD40-2, SD40-2(W) Phases
2017-01-20
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO C-430 drawings (NYC version)
2017-01-19
- Added in Drawings/1:18 Undecorated section:
- 2 ALCO C-425 drawings (NH version)
- 2 ALCO C-430 drawings (RDG version)
- Revised in Drawings/1:18 Undecorated section:
- All MLW C-424 drawings
- Added missing end transoms to Type B trucks
- Added short hood top grabiron (left side views only)
- Revised rooftop dynamic brake vents
- All MLW C-424 drawings
- Revised in Drawings/1:18 Painted section:
- APA #97 (MLW C-424)
- CP #4237 (MLW C-424)
- Added missing end transoms to Type B trucks
- Added short hood top grabiron (left side views only)
- Revised rooftop dynamic brake vents
- Changed wheel colour from black to brown/silver (APA #97 only)
2017-01-10
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP35 drawings (RDG version)
2017-01-09
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD40 drawings (IC version)
2017-01-06
- Added in Drawings/1:18 Undecorated section:
- 4 GMD SD50F drawings
- 2 GMD SD60F drawings
- Added in Drawings/1:18 Painted section:
- DMVW #5454 (GMD SD50F)
2017-01-05
- Added in Locomotive Dimensions page:
- GMD SD40-2F dimensions
2017-01-04
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD40 drawings (LN Phase 2b versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35, GP40 and SD40 drawings (LN versions)
- Removed hand brake
- EMD GP35, GP40 and SD40 drawings (LN versions)
2017-01-03
- Added in Drawings/1:18 Undecorated section:
- 12 EMD SD40 drawings (BO and CO versions; GTW Phase 2b1 version)
- 2 EMD SD40-2 drawings (BO version)
- Updated in Locomotive Phases section:
- EMD SD38, SD39, SD40, SD45 Phases
- Converted phases to tabular format
- Added details and dates for SD38-SD40 (phases were previously only for the SD45)
- Added Phase 2b2
- EMD SD38, SD39, SD40, SD45 Phases
2017-01-02
- Added in Drawings/1:18 Undecorated section:
- 12 GE C30-7 drawings (ATSF Phase 1a, 1b and 2b versions)
- Revised in Drawings/1:18 Undecorated section:
- All GE C30-7, C30-7A and C36-7 drawings
- Removed extensions from the ends of the truck bolster
- Added fuel cut switch on engineer's side
- All GE C30-7, C30-7A and C36-7 drawings
Past Updates - 2016
2016-12-31
- Added in Drawings/1:18 Undecorated section:
- 16 GE C30-7 drawings (LN and SCL versions)
2016-12-30
- Added in Drawings/1:18 Undecorated section:
- 2 GE C30-7 drawings (SCL Phase 1a version)
- 2 GE C30-7A drawings
- 2 GE C36-7 drawings (CR version)
- Revised in Drawings/1:18 Undecorated section:
- GE B23-7 and B36-7 drawings (Phase 3b versions)
- Added missing side sill hatch ahead of left rear jacking pad
- Changed horn to Leslie RS-type (CR B36-7 variations)
- GE C30-7 drawings (CR version)
- Added flange lubricators
- Corrected front left truck brake line
- Added missing right rear air pipe vent valve
- Revised top corner steps
- GE C39-8 drawings (CR versions)
- Added flange lubricators
- GE B23-7 and B36-7 drawings (Phase 3b versions)
- Revised in Drawings/1:18 Painted section:
- CR #5002 (GE B36-7)
- Added missing side sill hatch ahead of rear jacking pad
- Changed horn to Leslie RS-type
- CR #5002 (GE B36-7)
- Updated in Locomotive Phases section:
- GE C30-7, C30-7A, C36-7 Phases
- Converted phases to tabular format
- Added Phases 1b and 2d
- GE C30-7, C30-7A, C36-7 Phases
2016-12-29
- Added in Drawings/1:18 Painted section:
- FWWR #2000 (EMD GP38-3)
2016-12-28
- Added in Drawings/1:18 Undecorated section:
- 2 GE BQ23-7 drawings
- 4 GE B30-7 drawings (SCL versions)
- Added in Drawings/1:18 Painted section:
- SCL #5134 (GE BQ23-7)
- Updated in Locomotive Phases section:
- GE B23-7, B30-7, B30-7A, B36-7 Phases
- Converted phases to tabular format
- Added Phase 2d
- GE B23-7, B30-7, B30-7A, B36-7 Phases
2016-12-27
- Added in Drawings/1:18 Undecorated section:
- 6 GE B23-7 (LN, PW and SCL versions)
- 2 GE B30-7 drawings (SLSF version)
2016-12-16
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP60 drawings (TM version)
- 2 GMD SD40-2F drawings (as modified version)
- Added in Drawings/1:18 Painted section:
- CMQ #9017 (GMD SD40-2F)
- CN #9511 (GMD GP40-2L(W)) - 1,000th 1:18 drawing
- CP #9009 (GMD SD40-2F)
2016-12-15
- Added in Drawings/1:18 Undecorated section:
- 2 GMD SD40-2F drawings
2016-12-14
- Added in Drawings/1:18 Undecorated section:
- 5 GMD SD40-2 drawings (CP Phase 2b, 2c and 2d1 versions)
- Revised in Drawings/1:18 Undecorated section:
- All GMD SD40-2 drawings
- Removed plate between bell bracket
- Removed air dryer on engineer's side (Phase 1b and 2a units)
- Revised center axle shock strut (Phase 2a units)
- Shorter corner handrails (Phase 2a units)
- Added fuel gauge on front of fuel tank (Phase 2a units)
- All GMD SD40-2 drawings
2016-11-19
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP38-3 drawings (FWWR 2004-2005)
2016-11-18
- Added in Drawings/1:18 Undecorated section:
- 8 EMD GP38-3 drawings (FWWR 2000-2003)
2016-11-17
- Revised in Drawings/1:18 Undecorated section:
- All GE ES40DC, ES44DC and ES44AC right-side views
- Lowered latch on hood door below exhaust stack
- All GE ES40DC, ES44DC and ES44AC right-side views
2016-11-09
- Added in Drawings/1:18 Undecorated section:
- 4 GE ES44AC drawings (CSXT versions)
2016-11-07
- Added in Drawings/1:18 Undecorated section:
- 6 GE ES44AC drawings (BNSF Phase 1b through 1d versions)
- Revised in Drawings/1:18 Undecorated section:
- GE ES44AC drawings (BNSF Phase 1f and 1g left-side views)
- Added walkway box behind inverter cabinet
- GE ES44AC drawings (NS versions)
- Added missing grabiron on short hood
- GE ES44AC drawings (BNSF Phase 1f and 1g left-side views)
2016-11-06
- Revised in Drawings/1:18 Undecorated section:
- GE ES40DC, ES44DC and ES44AC left-side views
- Revised panel under cab on conductor's side (4 bolts at top on Phase 1f and later units)
- GE ES40DC, ES44DC and ES44AC left-side views
2016-10-29
- Added in Photos section:
- 23 photos from 2016-10-27 (CBNS)
- 26 photos from 2016-10-26 (CBNS)
- 41 photos from 2016-10-25 (CBNS)
- 9 photos from 2016-10-24 (CBNS)
- 63 photos from 2016-10-23 (CBNS)
2016-10-19
- Added in Drawings/1:18 Undecorated section:
- 8 EMD SD40 drawings (GTW, LN and NW versions)
- Revised in Drawings/1:18 Undecorated section:
- Some EMD GP38, GP38-2, GP40 and GP40-2 drawings (BN, DRGW and DTi versions)
- Corrected Nathan M3 horn
- EMD SD40 right-side views
- Added missing lift ring at exhaust stack
- Some EMD GP38, GP38-2, GP40 and GP40-2 drawings (BN, DRGW and DTi versions)
2016-10-18
- Added in Drawings/1:18 Undecorated section:
- 10 EMD GP40 drawings (DRGW and NW versions)
2016-10-17
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP38 drawings (BN and MGA versions)
- 10 EMD GP38AC drawings (LN, LV, NW and SLSF versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38 drawings (with paper air filters and dynamic brakes)
- Revised shape at front of dynamic brake housing
- EMD GP38 drawings (with paper air filters and dynamic brakes)
2016-10-16
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP38 drawings (LN and MEC versions)
- 12 EMD GP40 drawings (CBQ, DTI, IC Phase 1a3 and LN versions)
- 2 GE ES44AC drawings (NS Phase 2c version)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 drawings (CBQ versions)
- Changed horn to Leslie S-2M
- EMD GP38 drawings (Phase 1 versions)
- Removed duplicate MU hose connector
- Added missing fan caps
- EMD GP38 drawings (PRSL Phase 2a2 version)
- Revised fuel tank location
- EMD GP35 drawings (CBQ versions)
2016-10-15
- Added in Drawings/1:18 Undecorated section:
- 2 GE ES44AC drawings (NS Phase 2e version)
- Revised in Drawings/1:18 Undecorated section:
- GE ES44AC left-side views
- Corrected minor error in rear sand hose/motor cable overlap
- GE ES44AC left-side views
2016-10-12
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP38 drawings (CRR version)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38 and GP40 drawings (Phase 1 through Phase 2a2)
- Fuel tank supports (Phase 1 units only)
- Cab sub-base ribs (Except Phase 1a1 units)
- EMD GP38 and GP40 drawings (Phase 1 through Phase 2a2)
2016-10-11
- Updated in Locomotive Phases section:
- EMD GP38/GP40 phases
- Converted phases to tabular format
- Added minor details (fuel tank supports, Phase 2b+ cab sub-base ribs)
- EMD GP38/GP40 phases
2016-10-10
- Revised in Drawings/1:18 Undecorated section:
- All GE ES40DC drawings and most GE Dash 9-40CW drawings (NS 9129 and up)
- Added cab signalling sensor behind steps
- GE ES44DC and ES44AC right-side views (Phase 2d and 2e versions)
- Corrected grills under radiator intakes
- GE ES44AC left-side views
- Added conduit for fuel cutoff switch
- All GE ES40DC drawings and most GE Dash 9-40CW drawings (NS 9129 and up)
2016-10-09
- Added in Drawings/1:18 Undecorated section:
- 6 EMD SD70ACe drawings (EMDX/KCS Phase 2f and UP Phase 2c versions)
2016-10-08
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD70ACe drawings (UP Phase 2d1 version)
- Added in Locomotive Dimensions page:
- EMD SD70ACe dimensions
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD70M-2 and SD70ACe drawings
- Added missing rear platform lights on the hood end
- Center hood door height
- Large rear hood intake height
- Revised intake under radiators on conductor's side (CN Phase 2e2 and 2f SD70M-2)
- All EMD SD70M-2 and SD70ACe drawings
2016-10-04
- Added in Drawings/1:18 Undecorated section:
- 6 EMD SD70ACe drawings (NS versions)
2016-10-03
- Added in Drawings/1:18 Undecorated section:
- 6 EMD SD70ACe drawings (NS and UP versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD70M-2 right-side views (CN Phase 2e2 and 2f versions)
- cab sub-base door position
- revised panel ahead of central air intake
- notch above brake wheel (Phase 2f)
- EMD SD70M-2 right-side views (CN Phase 2e2 and 2f versions)
2016-09-23
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD70M-2 drawings (CN Phase 2e versions)
2016-09-22
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD70M-2 drawings (CN Phase 2f version)
- Updated in Locomotive Phases section:
- EMD SD70M-2/SD70ACe phases
- Added introduction
- Converted phases to tabular format
- Added Phase 2e2
- EMD SD70M-2/SD70ACe phases
2016-07-30
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP38 drawings (DTI versions)
- 4 EMD GP38AC drawings (DTI versions)
- Revised in Drawings/1:18 Undecorated section:
- Most EMD GP38 drawings
- Revised fuel tank supports
- Front traction motor cables (PC left-side views)
- Most EMD GP38 drawings
2016-07-09
- Added in Photos section:
- 15 photos from 2016-07-04 (CP)
- 96 photos from 2016-07-04 (CN)
- 5 photos from 2016-07-01 (CP)
- 112 photos from 2016-06-30 (CN)
2016-06-22
- Added in Photos section:
- 49 photos from 2016-06-21 (SLR)
2016-06-15
- Major update in completed
- Completed re-sizing small versions of photos (in progress all days from June 11 to June 15)
- Added various photos from 1999 through 2005 (previously online but not listed in database, or missing photo files)
2016-06-11
- Major update in progress
- Changed method of displaying images in Photos section, using two image sizes instead of three
- Started re-sizing small versions of photos from maximum of 800 x 600 to maximum of 800 x 300, with EXIF data removed
2016-06-06
- Added in Photos section:
- 83 photos from 2016-06-06 (SLR)
2016-05-09
- Added in Drawings/1:18 Undecorated section:
- 2 GE C39-8E drawings (version with Rockwell trucks)
- Revised in Drawings/1:18 Undecorated section:
- GE C39-8E drawings
- Added missing front class lights
- GE C39-8E drawings
2016-04-29
- Added in Drawings/1:18 Undecorated section:
- 6 EMD SD38-2 drawings (EJE versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD38-2 drawings
- Added truck details behind steps (CNW and LN versions)
- Revised rear section of dynamic brake housing (SLSF 296-297)
- EMD SD38-2 drawings
2016-04-23
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP35 drawings (EMDX versions)
2016-04-20
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD38-2 drawings (LN version)
2016-04-19
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD38-2 drawings (CNW version)
- 6 EMD SD40-2 drawings (CNW versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 drawings (SOU Phase 2a2 and later versions)
- Corrected end handrail error from previous update
- EMD SD40-2 drawings (SOU Phase 2a2 and later versions)
2016-04-18
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD38-2 drawings (SLSF versions)
2016-04-15
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 drawings (ATSF and BN versions)
- Revised front class lights (no outer gasket)
- Removed rear number boards and class lights (ATSF versions)
- EMD SD40-2 drawings (ATSF and BN versions)
2016-04-14
- Major update completed
- Updated in Locomotive Phases section:
- EMD SD40-2 phases
- Added Phase 1b2, 1c1, 1c2, 2a1 and 2d2 (previous 2a1 through 2a3 are now 2a2 through 2a4)
- Revised existing detail descriptions
- EMD SD40-2 phases
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD40-2 drawings
- Revised steps - redrawn steps with deeper angled sheet on Phase 2a2 and later units; minor step revisions on earlier units)
- Revised jacking pads on some Phase 1a2 through 2a2 units (no casting hole)
- Added round front platform lights (BN units)
- Minor corrections to side sill, cab vent and short hood vent on isolated BN and RI units
- Changed phases to reflect updated SD40-2 phases
- All EMD SD40-2 drawings
2016-04-12
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD40-2 drawings (NW 6189-6207)
2016-04-09
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD40 drawings (BN version)
- Continued addition of 1:55 drawings to drawing search:
- EMD SD45-2, SD45T-2 and SD45X drawings
2016-04-08
- Added in Drawings/1:18 Undecorated section:
- 10 EMD SD40-2 drawings (SOU versions)
2016-04-07
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP50 drawings (SOU 7073-7092)
- 3 EMD SD40-2 drawings (SOU Phase 1a versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP39X and GP50 drawings (SOU versions)
- Added conductor's side short hood hatch
- Added short hood flag brackets
- Removed engineer's side fuel gauge (Phase 1a2 version) and short hood light
- Revised end handrails
- EMD GP39X and GP50 drawings (SOU versions)
2016-03-29
- Revised in Drawings/1:18 Undecorated section:
- GE ES44DC drawings (CSXT versions)
- Revised cab side windows
- Added grabirons to hood side of Phase 1e version
- GE ES44DC drawings (CSXT versions)
2016-03-04
- Added in Photos section:
- 22 photos from 2016-03-03 (CMQ)
2016-03-03
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD38 drawings (PC version)
- 2 EMD SD40 drawings (PC version)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP38 drawings
- Roof hatch around radiator fans
- EMD SD40-2 drawings (NW versions)
- Minor truck details
- All EMD GP38 drawings
2016-03-01
- Added in Drawings/1:18 Painted section:
- CEFX #2040 (EMD GP20D)
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP18 drawings (BM versions)
2016-02-29
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP18 drawings (IC version)
- Revised in Drawings/1:18 Undecorated section:
- Most EMD GP8, GP10 and GP11 drawings
- Added hood grabiron behind cab on engineer's side (GP8, GP10)
- Added pipe conduit behind cab on conductor's side (GP8, GP10)
- Fewer bolts around radiator intake screens (late GP9 and GP18 rebuilds)
- Most EMD GP8, GP10 and GP11 drawings
2016-02-28
- Revised in Drawings/1:18 Undecorated section:
- EMD GP28 drawings
- Revised cab awning (fabric instead of metal)
- EMD GP30 drawings (UP versions only)
- Revised cab mirrors, armrest and awning (fabric instead of metal)
- EMD GP28 drawings
2016-02-27
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP11 drawings (IC 8720)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP30 drawings
- Corrected pilots, support plates and footboards (representing GP18-GP30 version rather than GP35 and later version)
- EMD GP30 drawings
2016-02-25
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 drawings (GMO versions)
- Revised horn
- EMD GP35 drawings (GMO versions)
- Added in Photos section:
- 6 photos from 2016-01-22 (CMQ)
2016-02-22
- Revised in Drawings/1:18 Undecorated section:
- All MLW M-630 and M-636 drawings
- Added minor truck casting details
- All MLW M-630 and M-636 drawings
2016-02-20
- Added in Drawings/1:18 Undecorated section:
- 5 GE ES44AC drawings (BNSF versions)
- Revised in Drawings/1:18 Undecorated section:
- All GE Dash 9 series, ES40DC and ES44DC drawings
- Added traction pin in center of trucks
- All GE Dash 9 series, ES40DC and ES44DC drawings
2016-02-19
- Added in Drawings/1:18 Undecorated section:
- 18 EMD SD40-2 drawings (ATSF versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD SD40-2 drawings, SLSF version
- Removed dynamic brake hatch batten strip
- EMD SD40-2 drawings, SLSF version
2016-02-18
- Added in Drawings/1:18 Undecorated section:
- 8 EMD SD40-2 drawings (MKT versions)
2016-02-15
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD40-2 drawings (NW Phase 2a2 versions)
- 4 GE ES44AC drawings (BNSF Phase 2c and 2d versions)
- Updated in Locomotive Phases section:
- EMD/IC GP8 and GP10 phases
- Changed order of roster sorted by phase (now also sorted by sub-phase details)
- GE ES series phases
- Converted to table format
- EMD/IC GP8 and GP10 phases
2016-02-14
- Added in Drawings/1:18 Undecorated section:
- 6 EMD SD40-2 drawings (NW versions)
- 2 GE C39-8 drawings (NS Phase 1b versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD and GMD SD40-2 and SD40-2(W) drawings
- Corrected brake line on trucks (in front of truck chains, rather than behind)
- All EMD and GMD SD40-2 and SD40-2(W) drawings
2016-02-13
- Added in Drawings/1:18 Undecorated section:
- 10 GE C39-8 drawings (NS versions)
- Updated in Locomotive Phases section:
- EMD SD40-2 and GE C39-8 phases
- Converted to table format
- EMD SD40-2 and GE C39-8 phases
2016-02-11
- Added in Drawings/1:18 Undecorated section:
- 2 GE C39-8E drawings
- 11 GMD SD40-2 drawings (CP versions)
2016-02-10
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP40-2 drawings (RDG versions)
2016-02-08
- Added in Drawings/1:18 Undecorated section:
- 8 GMD SD40-2 drawings (CP and ONT versions)
- Revised in Drawings/1:18 Undecorated section:
- GMD GP30, GP35, GP38-2(W), GP40-2(W), GP40-2L(W) and SD40-2(W) drawings
- Revised rear headlight housing contour
- GMD GP30, GP35, GP38-2(W), GP40-2(W), GP40-2L(W) and SD40-2(W) drawings
2016-02-06
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP20C-ECO drawings
- 2 MLW M-630 drawings (as-modified versions with original air intakes)
- 4 MLW M-636 drawings (as-modified versions with original air intakes or square air filters)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP15D and GP20D right-side views
- Corrected speed recorder cable (GP15D)
- Added missing cab door latch and hinges
- GE Dash 9-40CW drawings (left-side views of NS 8889-9128)
- Shortened rear-most hood intake under radiator intakes
- MLW M-630, M-636 drawings (as-built versions)
- Removed end drop steps
- EMD GP15D and GP20D right-side views
2016-01-12
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP15D drawings (CEFX version)
- 2 EMD GP20D drawings
2016-01-09
- Added in Photos section:
- 48 photos from 2016-01-09 (CMQ & SLR)
- 2 photos from 2015-11-12 (CMQ)
- 21 photos from 2015-10-30 (CMQ)
- 8 photos from 2015-10-12 (CMQ)
- 45 photos from 2015-09-22 (CMQ)
- 25 photos from 2015-09-12 (SLR)
- 3 photos from 2015-08-29 (SLR)
2016-01-05
- Added in Drawings/1:18 Undecorated section:
- 2 GE C30-7 drawings (CR version)
2016-01-04
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SW1001 drawings (RDG version)
Past Updates - 2015
2015-12-16
- Added in Drawings/1:18 Undecorated section:
- 10 EMD GP10 drawings (CR versions)
- Revised in Drawings/1:18 Undecorated section:
- Most EMD GP10 left-side views (corrected missing section of rear sand hatch)
2015-11-02
- Added in Recordings section:
- 5 recordings from 2015-09-12 (Exporail)
- 1 recording from 2015-10-01 (SLR 804)
2015-09-14
- Added in Photos section:
- 31 photos from 2015-08-31 (SLR)
2015-09-13
- Added in Photos section:
- 107 photos from 2015-09-12 (Exporail)
2015-09-09
- Added in Drawings/1:18 Undecorated section:
- 6 GE ES44DC drawings (CSXT versions)
2015-09-07
- Added GE Dash 9-40CW Phases
- Added in Drawings/1:18 Undecorated section:
- 28 GE Dash 9-40CW drawings
- 6 GE ES44DC drawings (BNSF Phase 1c, 1f and 2a2 versions)
- 4 GMD SD40-2(W) drawings (CN 5262-5278)
- Revised in Drawings/1:18 Undecorated section:
- GE Dash 9-44CWL drawings
- Center hood roof & side panels
- GE Dash 9-44CWL drawings
2015-09-03
- Revised in Drawings/1:18 Undecorated section:
- EMD GP59 drawings (EMD demonstrator versions)
- Corrected location of front class lights
- EMD GP59 drawings (EMD demonstrator versions)
2015-09-01
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD60 drawings (CR version)
2015-08-31
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD60 drawings (CNW version)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP60, GP60B and GP60M drawings
- Removed flag holders
- Revised in Drawings/1:18 Painted section:
- ATSF GP60M #143
- ATSF GP60B #345
- SP GP60 #9724
- Removed flag holders
- All EMD GP60, GP60B and GP60M drawings
2015-08-30
- Added in Drawings/1:18 Undecorated section:
- 2 EMD SD60 drawings (EMDX version)
2015-08-28
- Added in Drawings/1:18 Painted section:
- CSXT #1524 (EMD GP15T)
2015-08-27
- Added in Drawings/1:18 Undecorated section:
- 4 GE Dash 8-40CW drawings (ATSF versions)
- 2 GE Dash 8-41CW drawings (ATSF version)
- Revised in Drawings/1:18 Undecorated section:
- GE Dash 8-40CW left-side views (CSXT Phase 1c and 1d versions)
- Corrected handrail stanchion spacing
- GE Dash 8-40CW left-side views (CSXT Phase 1c and 1d versions)
2015-08-25
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2, GP40-2, GP50, GP60 and SD40-2 drawings (all versions with anticlimbers)
- Revised end handrails (center stanchions moved in from the end, modified stanchion/chain support on GP50 and GP60 series)
- EMD GP38-2, GP40-2, GP50, GP60 and SD40-2 drawings (all versions with anticlimbers)
- Revised in Drawings/1:18 Painted section:
- BNSF #8010
- Revised end handrails (center stanchions moved in from the end)
- Converted lines to gray on dark green
- ATSF #143
- ATSF #345
- BN #3118
- BN #8004
- CR #3400
- SP #9724
- Revised end handrails (center stanchions moved in from the end, modified stanchion/chain support on GP50 and GP60 series)
- BNSF #8010
2015-08-21
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP15AC drawings (MP version)
- Added in Photos section:
- 33 photos from 2015-08-21 (SLR)
- 24 photos from 2015-07-28 (CMQ)
2015-08-20
- Added in Drawings/1:18 Undecorated section:
- 10 EMD GP15-1 drawings (MP versions)
- 2 EMD GP15T drawings (CO version)
2015-08-19
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP15-1 drawings (CR version)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2, GP39-2, GP40-2 and SD40-2 left-side views (Phase 2b1 and later) and most GP50 left-side views (except SOU versions)
- Air reservoir piping
- EMD GP59 drawings (NS version)
- Corrected center hood door hinge locations
- EMD GP38-2, GP39-2, GP40-2 and SD40-2 left-side views (Phase 2b1 and later) and most GP50 left-side views (except SOU versions)
- Updated Locomotive Phases section:
- EMD GP38-2, GP40-2 and SD40-2 Phases (updated Phase 2b1)
2015-08-18
- Added in Drawings/1:18 Painted section:
- AMTK #505 (GE Dash 8-32BWH)
- CDTX #2052 (GE Dash 8-32BWH)
2015-08-15
- Added in Drawings/1:18 Undecorated section:
- 2 GE Dash 8-32BWH drawings
2015-08-12
- Added in Drawings/1:18 Undecorated section:
- 4 GE Dash 8-40BW drawings
2015-08-10
- Revised in Drawings/1:18 Undecorated section:
- EMD GP59 drawings (NS version)
- Corrected rear (left side) and front (right side) air hose
- EMD GP59 drawings (NS version)
2015-08-07
- Revised in Drawings/1:18 Undecorated section:
- All GE Dash 8-40CW drawings
- Revised front corner handrails (higher attachment on short hood)
- Removed right rear hood grabiron (except Conrail variations)
- Some GE B39-8 and Dash 8-40B right-side views
- Removed right rear hood grabiron
- All GE Dash 8-40CW drawings
2015-08-03
- Revised in Drawings/1:18 Undecorated section:
- All GE Dash 8-40CW drawings
- Corrected short hood height (I made the same correction in early 2014 on all Dash-9 and ES drawings, but the error persisted in Dash-8 drawings in progress at the time)
- All GE Dash 8-40CW drawings
- Updated GE B32-8, B39-8, Dash 8-40B Phases
- Added table of length and truck center dimensions
- Replaced LMX B39-8 detail list with table
- Added details about Dash 8-40B, Dash 8-40BW and Dash 8-32BWH
2015-08-01
- Added in Drawings/1:18 Undecorated section:
- 2 GE B32-8 drawings (BN 5497-5499)
2015-07-30
- Revised in Drawings/1:18 Undecorated section:
- GE B23-7 drawings (ATSF Phase 3b version)
- Corrected front section of hood with narrower doors and vertical bolted straps (characteristic of Phase 3 Dash-7 units)
- GE B23-7 drawings (ATSF Phase 3b version)
2015-07-27
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP26 drawings
- 4 EMD GP30 drawings (KCS versions)
2015-07-26
- Added in Drawings/1:18 Undecorated section:
- 14 EMD GP30 drawings (GMO, SP and SSW versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP30 drawings
- Removed angled walkway plate from top step
- Revised engine room door height (2 px lower)
- Corrected broken line in cab roof (right-side views)
- Added access hatch near dynamic brake intake (UP left-side views only)
- EMD GP35 drawings (GMO versions, left-side views)
- Added missing fuel gauge
- All EMD GP30 drawings
2015-07-25
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD40 drawings (PRR versions)
2015-07-24
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP60 drawings (ATSF versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP60B and GP60M left-side views
- Front air reservoir piping
- EMD GP60B and GP60M left-side views
- Continued addition of 1:55 drawings to drawing search:
- EMD SD40-2 drawings (ATSF, BN, BO, CNW, ICG and KCS versions)
2015-07-22
- Revised in Drawings/1:18 Undecorated section:
- GE Dash 8-40C right-side views (NS versions) and all GE Dash 8-40CW, Dash 9-44CW and Dash 9-44CWL right-side views
- Revised vertical bars in dynamic brake intakes
- GE Dash 8-40C right-side views (NS versions) and all GE Dash 8-40CW, Dash 9-44CW and Dash 9-44CWL right-side views
2015-07-20
- Updated in Locomotive Phases section:
- GE AC4400CW Phases (Added Phase 1d, revised Phase 1e)
- Continued addition of 1:55 drawings to drawing search:
- (All remaining GE locomotive drawings)
- All GE AC4400CW and AC6000CW drawings
- All ES40DC, ES44DC and ES44AC drawings
2015-07-19
- Continued addition of 1:55 drawings to drawing search:
- All GE Dash 9-40C, Dash 9-40CW, Dash 9-44CW and Dash 9-44CWL drawings
- All GE P32AC-DM, P40DC and P42DC drawings
2015-07-08
- Added in Drawings/1:18 Undecorated section:
- 2 GE Dash 9-44CWL drawings
- Revised in Drawings/1:18 Undecorated section:
- GE Dash 8-32B right-side view
- Removed rear hood end grabiron
- All GE Dash 8-40C and Dash 8-40CW right-side views
- Corrected air reservoir length
- Corrected/removed rear hood end grabiron (NS versions only)
- All GE Dash 9-44CW, ES40DC and ES44DC right-side views
- Corrected air reservoir length
- Added missing sand hose in front underframe
- Corrected brake lines (CN Dash 9-44CW 2523-2602 only)
- Most GE Dash 9-44CW, ES40DC and ES44DC left-side views
- Added missing brake line on truck near brake chain
- Corrected brake lines (CN Dash 9-44CW CN 2523-2602 only)
- GE Dash 8-32B right-side view
2015-07-04
- Corrected builder for NACC (North American Car) 5250, 5750 and 5852 cu-ft covered hopper drawings and photos (previously incorrectly listed as Ingalls)
2015-07-03
- Added in Photos section:
- 163 photos from 2015-06-29 (CN)
- 42 photos from 2015-06-23 (CMQ)
- Revised in Drawings/1:18 Undecorated section:
- GE Dash 8-40C drawings (NS versions) and most GE Dash 8-40CW left-side views
- Anticlimber MU cutout
- Corner handrails (Dash 8-40C)
- Anticlimber step, ditch lights, MU connections (late NS Dash 8-40C)
- GE Dash 8-40C drawings (NS versions) and most GE Dash 8-40CW left-side views
2015-06-08
- Added in Photos section:
- 20 photos from 2015-05-14 (CMQ)
2015-05-07
- Added in Photos section:
- 23 photos from 2015-05-06 (NBSR)
- 20 photos from 2015-05-05 (CBNS)
- 21 photos from 2015-05-04 (CBNS)
- 41 photos from 2015-05-03 (CBNS)
- 32 photos from 2015-05-03 (Train Station Inn)
2015-05-06
- Added in Photos section:
- 10 photos from 2015-05-02 (CBNS)
- 37 photos from 2015-05-01 (CBNS)
- 16 photos from 2015-04-30 (CBNS)
- 24 photos from 2015-04-29 (CBNS)
2015-04-25
- Finished correcting all missing links and thumbnails in Photos section
- Added in Photos section:
- 12 photos from 2004-10-04 (MMA)
- 3 photos from 2004-09-25 (SLR)
- 2 photos from 2004-09-20 (MMA)
- 1 photo from 2004-07-17 (SLR)
- 17 photos from 2004-07-09 (CP)
- 7 photos from 2002-10-08 (SLR)
2015-04-20
- Added in Photos section:
- 7 photos from 2001-06 (Elgin County Railway Museum)
- 37 photos from 2005-08-17 (Elgin County Railway Museum)
- Updated in Photos section:
- Re-scanned photos from 2005-08-18 (CP Quebec St. Yard)
2015-04-19
- Revised in Drawings/1:18 Undecorated section:
- GE B23-7 and B36-7 right-side views (neglected to re-upload several affected drawings until early 2018)
- Revised battery box cover dimensions
- Corrected underframe above rear truck (Phase 1 versions)
- GE B23-7 and B36-7 right-side views (neglected to re-upload several affected drawings until early 2018)
2015-04-18
- Added in Photos section:
- 3 photos from 2001-05
- 1 photos from 2001-06
- 2 photos from 2001-06-10
- 5 photos from 2001-07 (Train Station Inn)
- Updated in Photos section:
- Re-scanned most photos from 2001-04 to 2001-07
2015-04-17
- Added in Photos section:
- 64 photos from 2015-04-17 (CMQ)
2015-04-14
- Added in Photos section:
- 88 photos from 2015-04-14 (SLR)
- Added in Recordings section:
- 2 recordings from 2015-04-14 (SLR 803 leading)
- 3 recordings from 2014-10-14 (CEFX 2007)
2015-04-13
- Added in Photos section:
- 72 photos from 2015-04-13 (CMQ and SLR)
- Added in Recordings section:
- 3 recordings from 2015-04-13 (QGRY 3105 leading)
2015-04-04
- Added in Drawings/1:18 Undecorated section:
- 14 EMD GP38 drawings (PC and PRSL versions)
2015-04-03
- Added in Drawings/1:18 Undecorated section:
- 9 EMD GP38-2 drawings (PC versions)
2015-03-31
- Added in Photos section:
- 30 photos from 2015-03-31
2015-03-29
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP38-2 drawings (CR Phase 2a2 version)
- Added in Drawings/1:18 Painted section:
- BO #4331 (EMD GP40-2)
- Revised in Drawings/1:18 Undecorated section:
- Most EMD GP38-2 drawings (All Phase 1b1 and later units)
- Inertial air intakes (revised upper/lower ridge detail to match GP40-2 drawings - distinguished Phase 1b1/1b2 and Phase 2b1/2b2 units)
- Rear steps (Phase 2a1 and later - removed top step corner extension)
- Dynamic brake hatch (Phase 2a2 and later - removed batten strip at the rear of the hatch)
- Most EMD GP40-2 drawings (Phase 2a1 and later units)
- Inertial air intakes (revised upper/lower ridge detail on FL, SLSF and WP units)
- Rear steps (removed top step corner extension)
- Rear pilot - added hose pockets on pilot plates (where applicable)
- Most EMD GP38-2 drawings (All Phase 1b1 and later units)
2015-03-14
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2 and GP40-2 drawings - CR and GTW versions (anticlimber)
2015-03-02
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP30 drawings (UP versions)
- 2 EMD GP30B drawings (UP 727B-739B)
2015-02-15
- Added in Drawings/1:18 Painted section:
- ICG #7918 (EMD GP8)
- Revised in Drawings/1:18 Painted section:
- Most 1:18 painted drawings (revised colours)
2015-02-14
- Added in Drawings/1:18 Painted section:
- DTI #224 (EMD GP38-2)
- DTI #6419 (EMD GP40-2)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP38-2 and GP40-2 drawings, DTI versions (additional short hood grabirons)
2015-01-30
- Added in Photos section:
- 24 photos from 2003-03-28 (including SLR derailment)
2015-01-29
- Added in Photos section:
- 95 photos of vehicles & structures from 2000 to 2014
- 22 photos from 2014-09-26 (including 10 of the above)
- 4 photos from 2008-10-17 (MMA 2005)
- 18 photos from 2007-12-30
2015-01-21
- Added in Locomotive Phases section:
- EMD GP30 Phases
2015-01-20
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP30 drawings (radiator intakes - distinction between Phases 1a-1c2 vs. 1d-2b)
2015-01-17
- Added in Drawings/1:18 Undecorated section:
- 15 EMD GP35 drawings (SP and SSW versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP35 drawings, CBQ versions (cab side mirrors)
- EMD GP40 drawings, SSW versions (cab side mirrors and armrest)
2015-01-15
- Added in Drawings/1:18 Painted section:
- NS #3533 (GE Dash 8-32B)
2015-01-11
- Added in Drawings/1:18 Undecorated section:
- 2 GE C32-8 drawings
- Revised in Drawings/1:18 Undecorated section:
- All GE B39-8, Dash 8-32B, Dash 8-40B and Dash 8-40C drawings:
- Short hood seam along cab sub-base
- All GE B39-8, Dash 8-32B, Dash 8-40B and Dash 8-40C drawings:
2015-01-10
- Updated in Locomotive Phases section:
- GE B32-8/B39-8 and C32-8/C39-8 Phases (added phase descriptions and extensive additional details)
2015-01-08
- Revised in Drawings/1:18 Undecorated section:
- All GE B23-7 and B36-7 drawings:
- Central hood door spacing
- All GE B39-8, Dash 8-32B and Dash 8-40B drawings:
- Central air intake and left-side doors under intake
- Brake wheel
- All GE Dash 8-40C drawings:
- Handrail stanchion spacing
- Brake wheel
- All GE B23-7 and B36-7 drawings:
2015-01-05
- Added in Drawings/1:18 Undecorated section:
- 4 GE C39-8 drawings (CR versions)
- Revised in Drawings/1:18 Undecorated section:
- All GE B39-8, Dash 8-32B and Dash 8-40B drawings:
- Radiator roof grill dimensions
- Left-side fuel tank fittings (a few units)
- Dynamic brake roof panels
- Front anticlimber (most units)
- All GE Dash 8-40C and Dash 8-40CW drawings:
- Radiator roof grill dimensions (except Phase 2 units)
- Dynamic brake roof panels
- Front anticlimber (Phase 1a units only)
- All GE B39-8, Dash 8-32B and Dash 8-40B drawings:
Past Updates - 2014
2014-12-31
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD45 drawings (underframe height, truck details and casting logos)
2014-12-27
- Added in Drawings/1:18 Undecorated section:
- 2 GE Dash 8-32B drawings
- 6 GE Dash 8-40B drawings (ATSF and CR versions)
- Revised in Drawings/1:18 Undecorated section:
- All GE B23-7 and B36-7 right-side views (air reservoir piping)
2014-12-24
- Added in Drawings/1:18 Undecorated section:
- 2 GE B39-8 drawings (SP version)
- 4 GE Dash 8-40B drawings (SSW versions)
2014-12-23
- Added in Drawings/1:18 Undecorated section:
- 4 GE Dash 8-40C drawings (NS versions)
2014-12-21
- Added in Drawings/1:18 Undecorated section:
- 2 GE Dash 8-40C drawings (CR version)
- Revised in Drawings/1:18 Undecorated section:
- All GE B39-8 drawings (front class lights, short hood grabiron, coupler pockets, minor hood details)
- All GE Dash 8-40CW drawings (coupler pockets, uncoupling levers, axle shock struts on Phase 1a through 1c units, minor truck details)
2014-12-09
- Added in Drawings/1:18 Painted section:
- CR #5002 (GE B36-7)
- Revised in Drawings/1:18 Painted section:
- CR #3400 (EMD GP40-2) (Added front and rear lettering)
- Revised in Drawings/1:18 Undecorated section:
- All GE B23-7 and B36-7 drawings (shortened center hood section by 1/2")
2014-12-08
- Added in Drawings/1:18 Undecorated section:
- 6 GE B36-7 drawings (ATSF and CR versions)
- Revised in Drawings/1:18 Undecorated section:
- Most GE B23-7 drawings (grabiron under right numberboard, FB-2 truck journal wear plates, Phase 2c/3 exhaust stack)
- Updated in Locomotive Phases section:
- GE 4-axle Dash-7 phases (Added Phase 3b)
2014-12-07
- Added in Drawings/1:18 Undecorated section:
- 2 GE B23-7 drawings (ATSF Phase 3b versions)
2014-12-06
- Added in Drawings/1:18 Undecorated section:
- 4 GE B23-7 drawings (CR Phase 1a and 2a versions)
2014-12-05
- Added in Drawings/1:18 Undecorated section:
- 2 GE B23-7 drawings (CR Phase 2b version)
- Revised in Drawings/1:18 Undecorated section:
- All previous GE B23-7 drawings (steps, minor hood bolt details, coupler pocket)
2014-12-02
- Added in Drawings/1:18 Undecorated section:
- 4 GE B23-7 drawings (ATSF versions)
2014-11-28
- Added in Drawings/1:18 Undecorated section:
- 4 GE B23-7 drawings (ATSF versions)
- Revised in Drawings/1:18 Undecorated section:
- GMO EMD GP35 variations (trucks)
2014-11-23
- Revised in Drawings/1:18 Undecorated section:
- SP and SSW EMD GP60 variations (air conditioner)
- Updated in Locomotive Phases section:
- GE Dash 8-40CW phases (separated Phase 1e from 1d)
2014-11-14
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP60, GP60B and GP60M drawings (moved rear lift ring from roof to side on Phase 2b and later units, revised inertial air intakes, corrected GP60B door latches)
- Continued addition of 1:55 drawings to drawing search:
- All EMD GP39, GP39-2, GP39X, GP49, GP50, GP50L, GP60, GP60B and GP60M drawings
- All EMD SD7, SD9, SD20 and SD24 drawings
2014-11-13
- Added in Drawings/1:18 Painted section:
- ATSF #345 (EMD GP60B)
- CN #5250 (GMD SD40-2(W))
- Revised in Drawings/1:18 Undecorated section:
- GMD SD40-2(W) and EMD SD40-2 Phase 1a right-side views (walkway side frame behind fuel tank)
- Updated in Locomotive Phases section:
- EMD SD38-2, SD40-2, SD45-2 Phases (added side frame note under Phase 2a1)
- EMD GP59, GP60 Phases (added lift ring note under Phase 2b)
2014-11-11
- Added in Drawings/1:18 Painted section:
- BN #8004 (EMD SD40-2)
2014-11-10
- Added in Drawings/1:18 Painted section:
- BNSF #8010 (EMD SD40-2)
2014-11-08
- Added in Drawings/1:18 Undecorated section:
- 4 EMD SD40-2 drawings (BN versions)
- Updated in Locomotive Phases section:
- EMD GP40-2, GP60 and SD40-2 Phases
- Added background information
- Revised wording of phase descriptions
- Started adding reference lists
- EMD GP40-2, GP60 and SD40-2 Phases
2014-11-07
- Added in Drawings/1:18 Undecorated section:
- 12 EMD SD40-2 drawings (BN versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD40-2 drawings
- Inertial air intakes (added ridge on top)
- Revised center axle shock strut (Phase 1 units)
- All EMD SD40-2 drawings
- Updated in Locomotive Phases section:
- EMD SD40-2 Phases
- Updated Phase 2a1 and added Phase 2a3
- EMD SD40-2 Phases
2014-11-06
- Added in Drawings/1:18 Undecorated section:
- 10 EMD SD40-2 drawings (BN versions)
2014-11-02
- Added in Drawings/1:18 Painted section:
- ATSF #143 (EMD GP60M)
2014-10-29
- Added in Drawings/1:18 Undecorated section:
- 8 GE Dash 8-40CW drawings (CSXT versions)
2014-10-24
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP8, GP10, GP11 and GP30 drawings
- Radiator fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
- All EMD GP8, GP10, GP11 and GP30 drawings
- Revised in Drawings/1:18 Painted section:
- ICG #8719 (EMD GP11)
- Truck shape and casting logos
- Radiator fans (bottom rim edge and upper rim clips)
- CP #4237 (MLW C-424)
- Truck casting logos
- ICG #8719 (EMD GP11)
2014-10-23
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP28, GP35, GP38, GP38-2, GP39-2, GP50, GP59, GP60, GP60B and GP60M drawings
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- All EMD GP28, GP35, GP38 and GP39-2 drawings
- Truck shape and casting logos
- All MLW C-424, M-630 and M-636 drawings
- Truck casting logos
- All EMD GP28, GP35, GP38, GP38-2, GP39-2, GP50, GP59, GP60, GP60B and GP60M drawings
- Revised in Drawings/1:18 Painted section:
- AA #2373 (EMD GP39-2), BN #3118 (EMD GP50), CR #3400(EMD GP40-2), RI #342 (EMD GP40) and SP #9724 (EMD GP60)
- Truck shape and casting logos (where absent)
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- APA #97 (MLW C-424)
- Truck casting logos
- AA #2373 (EMD GP39-2), BN #3118 (EMD GP50), CR #3400(EMD GP40-2), RI #342 (EMD GP40) and SP #9724 (EMD GP60)
2014-10-22
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP40, GP40-2, SD40-2 and SD45-2 drawings
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- All EMD GP40 drawings
- Truck shape and casting logos
- All EMD GP40, GP40-2, SD40-2 and SD45-2 drawings
- Revised in Drawings/1:18 Painted section:
- CN #5570 (GMD GP38-2(W)):
- Added rerail frog
- Corrected rear pilot handrail (stanchions flush on pilot)
- Radiator fans (bottom rim edge and upper rim clips)
- CN #5570 (GMD GP38-2(W)):
2014-10-20
- Added in Drawings/1:18 Undecorated section:
- 4 GMD SD40-2(W) drawings (CN 5241-5261)
- Revised in Drawings/1:18 Undecorated section:
- All GMD GP38-2(W), GP40-2(W) and GP40-2L(W) drawings:
- Added rerail frogs on as-built versions
- Added coupler knuckle bracket (rear pilot) on as-modified versions
- Added oil retention tank (behind fuel tank) on as-modified versions
- Corrected rear pilot handrail (stanchions flush on pilot)
- Corrected right side handrail (angled section at cab)
- Revised radiator fans (bottom rim edge and upper rim clips)
- All GMD GP38-2(W), GP40-2(W) and GP40-2L(W) drawings:
2014-10-16
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD40-2 and SD45-2 drawings (corrected main frame thickness - reduced by 0.5")
2014-10-14
- Added in Photos section:
- 56 photos from 2014-10-14
2014-10-09
- Revised in Drawings/1:18 Undecorated section:
- All GE B39-8 and Dash 8-40CW drawings (exhaust stack)
2014-10-06
- Added in Drawings/1:18 Painted section:
- PW #3902 (GE B39-8)
2014-10-05
- Continued addition of 1:55 drawings to drawing search:
- All GE 6-axle Dash-7 drawings
- All GE Dash-8 drawings
2014-10-04
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP8 drawings (Phase 4b version)
- Continued addition of 1:55 drawings to drawing search:
- All GE Universal series drawings
- All GE 4-axle Dash-7 drawings
2014-10-01
- Added in Drawings/1:18 Undecorated section:
- 2 Trinity 50' 6" 6200 cu-ft boxcar drawings
- 12 Trinity 50' 6" 6235 cu-ft boxcar drawings
2014-09-29
- Added in Photos section:
- 65 photos from 2014-09-27
- 43 photos from 2014-09-19
- Added in Photos section (previously listed in the photo search but missing images):
- 8 photos from 2004-11-15
- 5 photos from 2004-11-14
- 5 photos from 2004-09-27
- 3 photos from 2004-09-26
- 14 photos from 2004-08-10
- 3 photos from 2004-08-06
- Updated in Photos section (rescans of existing images):
- 10 photos from 2014-08-09
- 25 photos from 2014-08-07
2014-09-28
- Added in Photos section:
- 32 photos from 2014-08-06
2014-09-16
- Added in Drawings/1:18 Undecorated section:
- 2 GE Dash 8-40CW drawings (CR 6050-6099)
2014-09-15
- Added in Drawings/1:18 Undecorated section:
- 14 GE B39-8 drawings (LMX versions)
- Added in Photos section:
- 1 photo from 2006-04-11 (SLR 3806)
- 2 photos from 2006-03-?? (CP 387654)
- 2 photos from 2006-02-27 (MMA 8578, WLO 528306)
- 3 photos from 2006-01-03
- 8 photos from 2005-12-??
- 15 photos from 2005-11-29
- 11 photos from 2005-10-28
- 1 photo from 2005-10-04
- Updated in Locomotive Phases section:
- GE B32-8, B39-8 Phases
2014-08-20
- Added in Drawings/1:18 Undecorated section:
- 10 GE Dash 8-40CW drawings (CR versions)
- Updated in Locomotive Phases section:
- GE B32-8, B39-8, C32-8, C39-8 Phases
- GE Dash 8-40C, Dash 8-40CW Phases
- Added Locomotive Components section
- Added Creating the Drawings section
2014-08-04
- Added in Photos section:
- 17 photos from 2014-08-03
- 1 photo from 2014-07-20
2014-08-02
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP40-2 drawings (CR Phase 2a2 version)
- Revised in Drawings/1:18 Undecorated section:
- All BO, CO, CR and WM EMD GP40-2 drawings (truck casting logos, inertial air intake, corrected Phase 2a2 versions)
- Updated EMD GP40-2 Phases (added Phase 2a2) in Locomotive Phases section
- Added in Photos section:
- 143 photos from 2014-08-01
2014-07-22
- Added in Photos section:
- 106 photos from 2014-07-22
2014-07-19
- Added in Photos section:
- 143 photos from 2014-07-18
2014-07-15
- Added in Photos section:
- 276 photos from 2014-07-11
2014-07-12
- Added in Photos section:
- 7 photos from 2014-06-07
- 30 photos from 2014-05-10
2014-05-24
- Added in Drawings/1:18 Painted section:
- CR #3400 (EMD GP40-2)
- Revised in Drawings/1:18 Painted section:
- CN #5570 (GMD GP38-2(W)) - revised Orange #11 colour
- SP #9724 (EMD GP60) - revised Scarlet colour
- Added Colour section
- Added in Lettering and logos section:
- CR logo, lettering and numbers
2014-05-09
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP40-2 drawings (F.L. version)
2014-05-05
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP40-2 drawings (F.L. and WP versions)
2014-04-06
- Continued addition of 1:55 drawings to drawing search (all CLC and FM locomotives)
2014-03-22
- Added in Drawings/1:18 Undecorated section:
- 8 EMD GP10 drawings
2014-03-21
- Added "Horn Concerts, Greetings" option in Recordings section
2014-03-03
- Updated EMD GP40-2 Phases with roster in Locomotive Phases section
2014-02-23
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP8 drawings
- 2 EMD GP59 drawings (EMDX 10)
- Updated EMD GP59/GP60 Phases with rosters in Locomotive Phases section
2014-02-22
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP8 drawings
- 4 GE Dash 9-44CW drawings (early CN versions)
- Revised in Drawings/1:18 Undecorated section:
- All GE Dash 9-44CW, ES40DC and ES44DC drawings (truck casting logo and text, short hood height)
2014-02-18
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP38-2 drawings (DTI version)
- 4 EMD GP40-2 drawings (DTI and SLSF versions)
2014-02-17
- Added in Drawings/1:18 Painted section:
- APA #97 (MLW C-424)
- BN #3118 (EMD GP50)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP50, GP50L, SD40-2 and SD45-2 drawings (truck shape and casting logo)
2014-02-16
- Added in Drawings/1:18 Undecorated section:
- 8 EMD GP38-2 drawings (BN and GTW versions)
2014-02-15
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP38-2 drawings (CR versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP40-2 drawings (CR versions), all GP38-2, GP59 and GP60 drawings (truck shape and casting logo)
2014-02-10
- Continued addition of 1:55 drawings to drawing search (EMD/GMD GP-series units up to the GP40X)
2014-02-09
- Continued addition of 1:55 drawings to drawing search (all remaining ALCO, BBD and MLW locomotives)
- Revised in Drawings/1:18 Undecorated section:
- All GMD locomotive drawings (added casting logo to trucks)
- Added in Photos section:
- 28 photos from 2014-02-07
2014-02-01
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP59 drawings (EMDX version)
2014-01-31
2014-01-30
- Added in Drawings/1:18 Painted section:
- ICG #8719 (EMD GP11)
2014-01-29
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP10 drawings (IC 8203 version)
- 6 EMD GP11 drawings (IC 8723, 8725; IC 8744; IC 8747 versions)
- Updated EMD GP8 and GP11 Phases with IC rosters in Locomotive Phases section
- Added in Photos section:
- 3 photos from 2011-08-24
2014-01-28
- Added EMD (IC) GP8 Phases in Locomotive Phases section
- Updated EMD GP7 Phases in Locomotive Phases section
2014-01-24
- Added in Drawings/1:18 Undecorated section:
- 8 EMD GP10 drawings (IC Phase 3b and ADN versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP11 drawings (sunshades, window armrests, Oscitrol lights)
- Updated EMD GP10 Phases with IC GP10 roster in Locomotive Phases section
2014-01-22
- Added in Drawings/1:18 Undecorated section:
- 10 EMD GP10 drawings
- 4 EMD SD40-2 drawings (ICG and SLSF versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP11 drawings (battery box cover length, front handrail stanchion location)
- Added EMD GP10 Phases in Locomotive Phases section
- Updated EMD GP11 and SD40-2 Phases in Locomotive Phases section
2014-01-14
- Added in Photos section:
- 77 photos from 2014-01-13
2014-01-12
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP30 drawings (SAL version)
2014-01-11
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP50 drawings (MP version)
- 2 EMD GP60B drawings
- Revised in Drawings/1:18 Undecorated section:
- All EMD/GMD GP38-2, GP40-2, GP39-2, GP39X, GP50 and GP60 series right-side views (generator cabinet door and bolted panel)
2014-01-10
- Added in Drawings/1:18 Painted section:
- CP #4237 (MLW C-424)
- Added in Recordings section:
- 4 missing recordings (previously online but not in the database) of GATX 3702 and GATX 3717
2014-01-09
- Added in Drawings/1:18 Undecorated section:
- 2 GMD GP30 drawings (CP version)
- 8 GMD GP35 drawings (CN and CP versions)
- Updated EMD GP35 Phases in Locomotive Phases section
- Updated GMD GP35 Phases in Locomotive Phases section
2014-01-08
- Added in Drawings/1:18 Undecorated section:
- 2 MLW M-636 drawings (CP #4728 as modified)
- Revised in Drawings/1:18 Undecorated section:
- MLW M-630 and M-636 as-modified variations (added walkway over central air intake)
- MLW M-636 left-side views (revised speed recorders)
2014-01-06
- Added in Drawings/1:18 Undecorated section:
- 4 MLW C-424 drawings (CP as-modified versions)
- Added C-424 dimensions in Locomotive Dimensions section
2014-01-05
- Added in Drawings/1:18 Undecorated section:
- 6 MLW C-424 drawings (CP versions)
- Updated ALCO/MLW C-424 Phases in Locomotive Phases section
Past Updates - 2013
2013-12-23
- Added in Drawings/1:18 Undecorated section:
- 11 GE ES40DC drawings
- Updated GE ES series Phases in Locomotive Phases section
2013-12-07
- Added in Drawings/1:18 Undecorated section:
- 6 GE Dash 9-44CW drawings (CN versions)
- Revised in Drawings/1:18 Undecorated section:
- All GE ES44DC drawings (sand brackets, front grabirons, traction motor cables, left cab subbase)
2013-11-19
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP35 drawings (EL version)
2013-11-18
- Added in Drawings/1:18 Undecorated section:
- 20 EMD GP11 drawings (CRR and IC versions)
2013-11-15
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP11 drawings
- Updated GP11 Phases in Locomotive Phases section
2013-11-14
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP11 drawings
2013-11-13
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP11 drawings
2013-11-06
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP30B drawings
- 4 GE ES44DC drawings (BNSF Phase 2c and 2d versions)
2013-11-05
- Added in Drawings/1:18 Undecorated section:
- 4 GE ES44DC drawings (BNSF Phase 2e and CN Phase 1c versions)
2013-11-04
- Added in Drawings/1:18 Undecorated section:
- 2 GE ES44DC drawings (CN Phase 2e version)
2013-10-30
- Added in Drawings/1:18 Undecorated section:
- 4 GE ES44DC drawings (CN versions)
2013-10-15
- Added new photos in Photos section:
- 24 photos from 2013-10-12
2013-10-06
- Added new photos in Photos section:
- 7 photos from 2013-10-05
- 6 photos from 2013-10-04
- 3 photos from 2013-10-03
- 16 photos from 2013-10-02
- 4 photos from 2013-10-01
- 31 photos from 2013-09-29
2013-09-24
- Added in Drawings/1:18 Undecorated section:
- 9 EMD GP35 drawings (GMO versions)
2013-09-22
- Added in Drawings/1:18 Undecorated section:
- 4 GMD GP40-2(W) drawings
- 8 GMD GP40-2L(W) drawings
- 4 EMD SD45-2 drawings (CRR and SCL versions)
2013-09-21
- Added new photos in Photos section:
- 137 photos from 2013-09-17
2013-09-16
- Added new photos in Photos section:
- 62 photos from 2013-09-16
2013-09-13
- Added new photos in Photos section:
- 18 photos from 2013-09-13
- 3 photos from 2013-09-11
- 12 photos from 2013-06-23
2013-07-15
- Added new photos in Photos section:
- 118 photos from 2013-06-29
2013-07-13
- Added "Culture Deficit: Hostile Railroad Employees" in Information section
2013-06-24
- Added new photos (previously online but not in database) in Photos section:
- 2 photos from 2002-08-08
- 3 photos from 2002-06-17
- 7 photos from 2002-06-09
- Added missing images in Photos section:
- 1 photo from 2002-08-26
- 1 photo from 2002-08-23
- 1 photo from 2002-08-17
- 2 photos from 2002-08-03
- 2 photos from 2002-07-25
- 1 photo from 2002-07-24
- 2 photos from 2002-07-22
- 3 photos from 2002-06-04
- 2 photos from 2002-06-01
- 1 photo from 2002-05-30
- 1 photo from 2002-05-26
- 1 photo from 2002-05-22
- 1 photo from 2002-05-15
- 5 photos from 2002-04-27
- 2 photos from 2002-04-18
- 2 photos from 2002-03-17
2013-06-23
- Added new photos in Photos section:
- 17 photos from 2012-12-08
- 109 photos from 2012-11-20
2013-06-21
- Added new photos in Photos section:
- 48 photos from 2013-06-05
2013-06-11
- Added in Drawings/1:18 Undecorated section:
- 5 MLW M-636 drawings (late CP versions)
2013-06-10
- Added in Drawings/1:18 Undecorated section:
- 5 EMD GP35 drawings (MP versions)
2013-06-09
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP35 drawings (NW versions)
- Revised in Drawings/1:18 Undecorated section:
- EMD GP28 left-side view drawings (removed duplicate bell)
2013-06-08
- Added in Drawings/1:18 Undecorated section:
- 8 MLW M-630 drawings (CP versions)
- 4 MLW M-636 drawings (CP #4700-4704)
- Added in Drawings/1:18 Painted section:
- RI #342 (EMD GP40)
2013-05-29
- Added new photos in Photos section:
- 69 photos from 2013-05-27
- 65 photos from 2013-05-08
- 7 photos from 2013-05-04
2013-05-25
- Added in Drawings/1:18 Undecorated section:
- 10 EMD GP40 drawings (RI, SSW and WM versions)
2013-05-18
- Added Locomotive Dimensions and Measurements section
2013-05-14
- Added in Drawings/1:18 Undecorated section:
- 2 MLW M-636 drawings (CP 4705-4727 as modified)
2013-05-01
- Added new photos in Photos section:
- 17 photos from 2013-04-28
- 28 photos from 2013-04-30
2013-04-25
- Added new photos in Photos section:
- 67 photos from 2013-04-04
- 42 photos from 2013-04-10
- 23 photos from 2013-04-22
- 1 photo from 2013-04-23
2013-04-23
- Added in Photos section:
- Notes for detail photos
- Search feature for notes
2013-04-15
- Added in Drawings/1:18 Painted section:
- AA #2373 (EMD GP39-2)
2013-04-13
- Added in Recordings section:
- 5 recordings from 2012
- Added built-in search feature in Recording Search Results page
2013-04-12
- Continued update of source code of all pages, involving:
- Updating to HTML5 from HTML4.01 Strict
- Cleaning up code style
- Removing optional tags
2013-04-11
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP39-2 drawings (MKT version)
- 2 EMD GP39X drawings
2013-04-07
- Added new photos in Photos section:
- 25 photos from 2013-03-22
- 11 photos from 2013-03-28
2013-03-27 to 29
- Started update of source code of all pages, involving:
- Updating to HTML5 from HTML4.01 Strict
- Cleaning up code style
- Removing optional tags
- Added built-in search feature in Photo Search Results page
2013-03-19
- Added new photos in Photos section:
- 7 photos from 2007-01-02
- 10 photos from 2007-01-04
- 16 photos from 2013-03-18
2013-03-18
- Added missing images in Photos section:
- 10 photos from 2005-10-23
- 9 photos from 2005-10-21
- 12 photos from 2005-10-11
- 10 photos from 2005-10-06
2013-03-16
- Added new photos in Photos section:
- 2 photos from 2005-08-08
- 11 photos from 2005-09-10
- 3 photos from 2006-06-03
- 9 photos from 2006-07
- 41 photos from 2007-07-05
- Added missing images in Photos section:
- 2 photos from 2004-08-11
- 4 photos from 2005-08-27
- 20 photos from 2005-09-27
- 20 photos from 2005-09-28
- 9 photos from 2005-09-29
2013-03-11
- Added 153 new photos in Photos section
2013-03-05
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP60M drawings
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP50, GP59 and GP60 drawings (corner handrails, pilot braces, rear end plate, traction motor cables)
2013-02-28
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP60 drawings (SP/SSP Phase 2a versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP60 drawings (rear numberboards, short hood details)
2013-02-26
- Added in Drawings/1:18 Painted section:
- SP #9724 (EMD GP60)
2013-02-25
- Revised in Drawings/1:18 Undecorated section:
- All EMD SD40-2 drawings (end plates)
2013-02-23
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP30 drawings (ATSF and RDG versions)
- 6 EMD GP40 drawings (MKT versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP28, GP30 and GP35 drawings (end platform lights, rear class lights)
2013-02-20
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP38 drawings (MKT version)
2013-02-19
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP38-2 drawings (ITC version)
2013-02-18
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP38-2 drawings (LIRR versions)
2013-01-31
- Revamped Drawings Page to allow searching for several drawing scales at the same time
2013-01-27
- Received and added TrainNet Web Gem Award on side bar
2013-01-26
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP59 drawings (NS versions)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP60 drawings (Blower duct, central air intake, dynamic brake housing, trucks, fans)
- All EMD GP50 right-side view drawings (central air intake, dynamic brake housing)
2013-01-22
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP60 drawings (SP versions)
- Revised GP60 Phases in Locomotive Phases section
2013-01-21
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP60 drawings (SP version)
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP50 drawings (front traction motor cables)
2013-01-12
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP50 drawings (BN Phase 2b version)
- 2 EMD GP50L drawings
- Revised in Drawings/1:18 Undecorated section:
- All EMD GP38-2(W), GP40-2, GP50 and SD40-2 drawings (cab handrail attachments)
2013-01-08
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP50 drawings (BN version)
2013-01-05
- Added in Drawings/1:18 Undecorated section:
- 2 EMD GP50 drawings (CNW version)
2013-01-04
- Added GP39X, GP49 and GP50 Phase descriptions in Info section
- Added in Drawings/1:18 Undecorated section:
- 4 EMD GP50 drawings (SOU versions)
Past Updates - 2012
2012-12-31
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP40 drawings (BO, IC and PC versions)
- 6 EMD SD45 drawings (CNW, EMDX and PRR versions)
2012-12-17
- Revised all existing 1:18 drawings (air reservoir size)
2012-12-03
- Added in Drawings/1:18 Undecorated section:
- 5 EMD SD40-2 drawings (CNW and RI versions)
2012-11-20
- Added 101 photos in Photos section
2012-11-29
- Major update completed
- Introduced 1:18 drawing scale (duplicate drawings of the entire previous 1:24 series, except EMD SD40-2)
- Added in Drawings/1:18 Undecorated section:
- 6 EMD GP28 drawings
- 8 EMD GP30 drawings
- 19 EMD GP35 drawings
- 4 EMD GP38 drawings
- 6 EMD GP40 drawings
- 30 EMD GP40-2 drawings
- 10 GMD GP38-2(W) drawings
- Added in Drawings/1:18 Painted section:
- CN #5570 (GMD GP38-2(W))
- Removed all 1:24 drawings
2012-11-01
- Added in Drawings/1:24 Undecorated section:
- 6 EMD GP28 drawings (IC versions)
2012-10-31
- Added in Drawings/1:24 Undecorated section:
- 6 EMD GP30 drawings (BO, CO versions)
2012-10-27
- Added in Drawings/1:24 Undecorated section:
- 12 EMD GP40-2 drawings (CR versions)
2012-10-23
- Added in Drawings/1:24 Undecorated section:
- 12 EMD GP40-2 drawings (BO, CO and WM versions)
2012-10-20
- Added in Drawings/1:24 Undecorated section:
- 4 EMD GP38 drawings (BO versions)
- 4 EMD GP40-2 drawings (BO versions)
- Created Drawings/1:24 Painted section:
- Added in Drawings/1:24 Painted section:
- CN #5570 (GMD GP38-2(W))
2012-10-08
- Added in Drawings/1:24 Undecorated section:
- 2 EMD GP30 drawings (ATSF version)
- 5 EMD SD40-2 drawings (CNW, RI version)
- 10 GMD GP38-2(W) drawings
- Added/updated in Drawings section:
- Drawing Accuracy—How accurate are the drawings?
- Development of 1:36 and 1:24 series
2012-09-26
- Added 39 photos in Photos section
2012-09-25
- Added 88 photos in Photos section
2012-09-23
- Added 82 photos in Photos section
2012-09-05
- Added 40 photos in Photos section
2012-08-04
- Added 115 photos in Photos section
2012-07-31
- Re-scanned all photos from Exporail from 2001 (2001-03-08 and 2001-04)
2012-07-27
- Added 31 recordings from 2001-2002 (CN, MMA and LLPX locomotives leading) that were online in previous years but not listed in the new Recordings page from 2010
2012-07-11
- Added 52 photos in Photos section
2012-07-09
- Added 188 photos in Photos section
2012-05-04
- Added in Drawings/1:24 Undecorated section:
- 19 EMD GP35 drawings (BO, CO, CBQ and LN versions)
- 2 EMD GP40-2 drawings (BO version)
- Revised in Drawings/1:24 Undecorated section:
- Existing GP40 drawings (many minor details)
2012-04-11
- Created Drawings/1:24 Undecorated section:
- Added in Drawings/1:24 Undecorated section:
- 6 EMD GP40 drawings (BO and CO versions)
2012-03-21
- Added 87 new photos in Photos section
2012-02-23
- Added in Drawings/1:36 Undecorated Section:
- 2 GE Dash 9-40C drawings
- Revised in Drawings/1:36 Undecorated Section:
- All GE Dash 8-40C left-side views (added missing steps near cab)
2012-02-20
- Added AC4400CW phase descriptions in Locomotive Phases section
2012-02-05
- Added in Drawings/1:36 Undecorated Section:
- 6 ALCO C-425 drawings (BCOL, CNW and NH versions)
2012-02-04
- Added in Drawings/1:36 Undecorated Section:
- 4 ALCO C-425 drawings (NW Phase 2 and SPS versions)
2012-02-03
- Added in Drawings/1:36 Undecorated Section:
- 4 ALCO C-425 drawings (PRR versions)
2012-01-29
- Added in Drawings/1:36 Undecorated Section:
- 6 EMD SD50 drawings (CR Phase 2c versions)
2012-01-27
- Added in Drawings/1:36 Undecorated Section:
- 8 EMD SD50 drawings (CR Phase 2a versions)
2012-01-27
- Added in Drawings/1:36 Painted Section:
- CSXT #6025 (EMD GP40-2)
2012-01-26
- Added in Drawings/1:36 Painted Section:
- BN #5577 (GE C30-7)
- CR #6001 (GE C39-8)
- CR #6223 (GE Dash 8-40CW)
- CSXT #7545 (GE Dash 8-40C)
- Added in Drawings/1:36 Painted Section:
- All CR and LMSX drawings (lighter shade of blue)
- Revised in Drawings/1:36 Undecorated Section:
- GE C30-7 right-side views (front handrail)
2012-01-21
- Added in Drawings/1:36 Painted Section:
- NS #2685 (EMD SD70M-2)
- NS #8636 (GE C39-8)
- Revised in Drawings/1:36 Undecorated Section:
- EMD SD70M-2 Phase 2a left-side views (added rear ditch lights)
- GE C39-8, as modified NS versions (added ditch lights)
2012-01-19
- Added in Drawings/1:36 Undecorated Section:
- 10 EMD SD70M-2 drawings (NS, early CN and FEC versions)
2012-01-18
- Added in Drawings/1:36 Undecorated Section:
- 10 EMD SD70M-2 drawings (late CN and FEC versions)
- Revised in Drawings/1:36 Undecorated Section:
- All EMD SD70ACe drawings (central hood proportions, left-side handrail stanchion spacing)
2012-01-17
- Added Trainiax Store page
2012-01-05
- Added in Drawings/1:36 Undecorated Section:
- 2 ALCO C-424 drawings (TPW version)
- 2 GE B23-7 drawings (LN/PW version)
- 14 GE B30-7 drawings (CO and SP versions)
2012-01-05
- Added in Drawings/1:36 Undecorated Section:
- 2 EMD GP16 drawings (CRR version)
- Added all remaining 1:55 painted locomotives to database, in Drawings/1:55 Painted Section
2012-01-01
- Added in Drawings/1:36 Undecorated Section:
- 20 GE ES44AC drawing (UP versions)
- Revised in Drawings/1:36 Undecorated Section:
- Most GE ES-series drawings (minor details)
- Added EMD GP11 and SD20 phases in Locomotive Phases section
- Updated and expanded GE ES phases in Locomotive Phases section
Past Updates - 2011
2011-12-27
- Added in Drawings/1:36 Undecorated Section:
- 10 EMD SD24 drawings (ATSF, CBQ, SOU and UP versions)
- 2 EMD SD24B drawings
- 11 GE ES44AC drawings (CP versions)
2011-12-19
- Added in Drawings/1:36 Undecorated Section:
- 20 EMD SD40 drawings (ASAB, BO, CO, CBQ, CRR, DEEX and PRR versions)
- 20 EMD SD45 drawings (DRGW, EL, EMDX, NW, PRR, RDG and SOU versions)
- Revised in Drawings/1:36 Undecorated Section:
- All existing EMD SD40 and SD45 drawings (pilot air hoses, fuel tank height, handrail stanchions, other minor details)
2011-11-19
- Added in Drawings/1:36 Undecorated Section:
- 12 EMD SD40-2 drawings (NW and SOU versions)
- Added in Drawings/1:36 Painted Section:
- DWP #5850 (EMD GP38-2)
- Revised in Drawings/1:36 Undecorated Section:
- 6 EMD SD40-2 drawings (NDM and NW versions)
2011-11-12
- Added in Drawings/1:36 Undecorated Section:
- 4 EMD GP38-2 drawings (GTW and RI Phase 2a version)
- 4 EMD SD70ACe drawings (BNSF Phase 2b1 and 2c versions)
- 2 EMD DDA40X drawings (UP 6936 version)
- 2 GMD GP38-2 drawings (CN version)
- 8 GMD GP40 drawings (CN versions)
- 2 ARI 25,500 gallon tank car drawings
- 8 ARI 33,600 gallon tank car drawings
- Added in Drawings/1:36 Painted Section:
- GTW #5824 (EMD GP38-2)
- Revised in Drawings/1:36 Undecorated Section:
- 2 EMD GP38-2 drawings (PLE version)
- 4 EMD SD70ACe drawings (BNSF Phase 2e versions)
- All GMD GP38-2(W) drawings
2011-10-16
- Added 57 new photos in Photos section
2011-09-04
- Added in Drawings/1:36 Undecorated Section:
- 4 GMD GP38-2 drawings (CP versions)
2011-08-20
- Added in Drawings/1:36 Undecorated Section:
- 4 Dash 8-40C drawings (CSXT, UP versions)
- 4 Gunderson boxcar drawings (50' 6", 6269 cu-ft)
- Revised in Drawings/1:36 Undecorated Section:
- All C32-8, C39-8, C39-8E and Dash 8-40C left-side views (added missing hatch in rear walkway side frame)
2011-08-19
- Added 123 new photos in Photos section
2011-08-10
- Added 272 new photos in Photos section
2011-08-08
- Added 60 new photos in Photos section
2011-08-02
- Added 6 new recordings in Recordings section
- Added 14 new photos in Photos section
2011-07-31
- Added 163 new photos in Photos section
2011-07-12
- Added 48 new photos in Photos section
2011-07-11
- Added 58 new photos in Photos section
2011-06-30
- Added 73 new photos in Photos section
2011-06-23
- Added 104 new photos in Photos section
2011-05-29
- Added 33 new photos in Photos section
2011-05-18
- Added 66 new photos in Photos section
2011-05-08
- Divided all ES40DC and ES44DC drawings into phases in Drawings/1:36 Undecorated Section
- Updated Website Building and Trainspotting Equipment sections
2011-04-25
- Added in Drawings/1:36 Undecorated Section:
- 8 EMD GP38 drawings (MEC versions)
- 6 EMD GP40-2 drawings (SP versions)
- 2 EMD SD60 drawings (CNW version)
- 12 EMD DDA40X drawings
2011-02-06
- Added in Drawings/1:36 Undecorated Section:
- 2 GE C32-8 drawings
- 4 GE C39-8 drawings (CR versions)
2011-02-05
- Added in Drawings/1:36 Undecorated Section:
- 24 GE C39-8 drawings (NS versions)
- Revised in Drawings/1:36 Undecorated Section:
- All GE C39-8E and Dash 8-40C drawings (minor details)
2011-01-27
- Added in Drawings/1:36 Undecorated Section:
- 2 GE C39-8E drawings
- Added in Drawings/1:36 Painted Section:
- CO #8643 (EMD SD50)
- MP #5038 (EMD SD50)
2011-01-18
- Added in Drawings/1:36 Undecorated Section:
- 2 EMD SD50 drawings (MP version)
2011-01-17
- Added in Drawings/1:36 Undecorated Section:
- 8 EMD SD50 drawings (CO and SBD versions)
2011-01-16
- Revised in Drawings/1:36 Undecorated Section:
- All EMD GP40-2 and SD50 drawings (minor details: fuel tank height, corner handrail stanchions, air hoses, mirrors, end hood hatches)
2011-01-13
- Added in Drawings/1:36 Undecorated Section:
- 2 Bulkhead flatcar drawings (GSC 61' 0")
2011-01-10
- Added in Drawings/1:36 Painted Section:
- MP #3215 (EMD SD40-2)
- MP #3309 (EMD SD40-2)
- MP #6070 (EMD SD40-2)
- RI #341 (EMD GP40)
2011-01-07
- Added in Drawings/1:36 Painted Section:
- RI #373 (EMD GP40)
- RI #4311 (EMD GP38-2)
- RI #4791 (EMD SD40-2)
2011-01-04
- Added in Drawings/1:36 Painted Section:
- CP #4656 (EMD GP40-2)
2011-01-03
- Added in Drawings/1:36 Undecorated Section:
- 4 SD70 drawings (CR and NS versions)
- Added SD70/SD70M phase descriptions in Locomotive Phases section
2011-01-02
- Added in Drawings/1:36 Undecorated Section:
- 8 EMD SD40-2 drawings (MP Phase 2b and 2c versions)
- 4 EMD SD70 drawings (IC versions)
- 2 GE ES44AC drawings (IAIS Phase 2d version)
- Added in Drawings/1:36 Painted Section:
- IAIS #513 (GE ES44AC)
2011-01-01
- Added in Drawings/1:36 Undecorated Section:
- 2 EMD SD40-2 drawings (MP Phase 2a2 version)
Past Updates - 2010
2010-12-31
- Added in Drawings/1:36 Undecorated Section:
- 2 EMD SD40-2 drawings (MP Phase 1a version)
- Added in Drawings/1:36 Painted Section:
- OHCR #8712 (EMD/IC GP11)
2010-12-30
- Added in Drawings/1:36 Painted Section:
- LSRC #798 (MLW M-420)
- SLQ #3569 (MLW M-420)
2010-12-27
- Created Drawings/1:55 Painted Section (by railroad)
- Created Drawings/1:55 Painted Section (by model)
2010-12-26
- Added in Drawings/1:36 Undecorated Section:
- 2 GE ES44C4 drawings
2010-12-23
- Added in Drawings/1:36 Undecorated Section:
- 4 GMD/CN GP9 slug drawings
- Added in Drawings/1:36 Painted Section:
- UP #5701 (GE AC4400CW)
2010-12-20
- Added in Drawings/1:36 Painted Section:
- BCOL #4605 (GE Dash 8-40CM)
2010-12-18
- Added in Drawings/1:36 Undecorated Section:
- 6 GE Dash 8-40CM drawings (BCOL and CN versions)
2010-12-13
- Added in Drawings/1:36 Undecorated Section:
- 4 GMD SD40-2(W) drawings (CN 5262-5269, 5273-5278)
2010-12-06
- Added numerous images and fonts in Drawings/1:36 Logos Page
- Added in Drawings/1:36 Painted Section:
- NS #473094 (NSC 50' 6" 6291 cu-ft boxcar)
2010-12-02
- Added 132 photos in Photos section (see Photo Updates - 2010-12 section)
2010-12-01
- Added in Drawings/1:36 Undecorated Section:
- 6 exterior-post boxcar drawings (NSC 50' 6" 6264 and 6291 cu-ft)
- Added in Drawings/1:36 Painted Section:
- FBOX #502077 (NSC 50' 6" 6264 cu-ft boxcar)
- FBOX #502243 (NSC 50' 6" 6264 cu-ft boxcar)
2010-11-12
- Added in Drawings/1:36 Undecorated Section:
- 14 exterior-post boxcar drawings (Pullman-Standard 50' 6" 5077, 5144 and 5277 cu-ft)
2010-11-07
- Added in Drawings/1:36 Undecorated Section:
- 8 exterior-post boxcar drawings (Pullman-Standard 50' 6" 5344 cu-ft)
2010-10-31
- Added in Drawings/1:36 Undecorated Section:
- 4 2-bay smooth-side covered hopper drawings (ARI 3272 cu-ft)
2010-10-29
- Added in Drawings/1:36 Undecorated Section:
- 2 EMD GP40-3 drawings (SLR 3805-3806)
- 2 tank car drawings (Trinity 30,145-gallon)
- 6 2-bay smooth-side covered hopper drawings (Thrall/Trinity 3230 cu-ft)
- 6 3-bay exterior-post covered hopper drawings (Pullman-Standard 4750 cu-ft)
- 10 3-bay smooth-side covered hopper drawings (ARI 5200 cu-ft)
- Added in Drawings/1:36 Painted Section:
- CTCX #731025 (Trinity 30,145-gallon tank car)
- NAHX #480347 (Pullman-Standard 4750 cu-ft hopper)
- SLR #3805 (EMD GP40-3)
- SLR #3806 (EMD GP40-3)
- TILX #197642 (Trinity 30,145-gallon tank car)
2010-10-20
- Added 83 photos in Photos section (see Photo Updates - 2010-10 section)
2010-10-18
- Added 92 photos in Photos section (see Photo Updates - 2010-10 section)
2010-10-11
- Added location keyword search in Advanced Photo Search section
2010-10-04
- Added 14 photos in Photos section (see Photo Updates - 2010-10 section)
2010-10-03
- Revised site appearance/styles
- Added header images above menu
2010-09-26
- Added builder/equipment type keyword search feature in Advanced Photo Search section
- Added 74 new photos in Photos section (see Photo Updates - 2010-09 section)
2010-09-25
- Added 40 photos in Photos section (see Photo Updates - 2010-09 section)
2010-09-23
- Added roadnumber range feature in Advanced Photo Search section
- Added 46 photos in Photos section (see Photo Updates - 2010-09 section)
2010-09-04
- Added in Drawings/1:36 Undecorated Section:
- 2 EMD SD50 drawings (BO version)
- Added in Drawings/1:36 Painted Section:
- AWP #6007 (EMD GP38-2)
- GA #6009 (EMD GP38-2)
- SCL #6056 (EMD GP38-2)
- SECX #3823 (EMD GP38-2)
2010-08-31
- Added in Drawings/1:36 Undecorated Section:
- 12 EMD GP38-2 drawings (AWP, CRR, LN, GA and SCL versions)
2010-08-30
- Added in Drawings/1:36 Undecorated Section:
- 2 EMD GP40X drawings (SOU version)
- 10 EMD SD70ACe drawings (BNSF, KCS and KCSM versions)
- 2 GE Dash 8-40C drawings (NS version)
- Revised in Drawings/1:36 Undecorated Section:
- 4 EMD SD70ACe drawings (UP Phase 2d1 and 2e versions)
- 2 GE Dash 8-40C drawings (CR version)
- Added in Drawings/1:36 Painted Section:
- BNSF #6783 (EMD SD40-2)
- HBRY #4200 (GMD GP40-2L(W))
- LMSX #708 (GE Dash 8-40CW)
2010-08-23
- Added in Drawings/1:36 Undecorated Section:
- 2 GE Dash 8-40C drawings (CR version)
- 2 EMD SD45 drawings (CBQ version)
- 2 ALCO RS-36 drawings (DH version)
- Revised in Drawings/1:36 Undecorated Section:
- All GE Dash 8-40CW left-side views (added missing rear cab window wiper)
- EMD SD45, PC Phase 2b2 version (revised handrail stanchions)
- Added in Drawings/1:36 Painted Section:
- BN #6461 (EMD SD45)
- DH #5021 (ALCO RS-36)
2010-08-10
- Added in Drawings/1:36 Undecorated Section:
- 4 ALCO RS-32 drawings (NYC and SP versions)
- 4 GMD SD40-2(W) drawings (CN 5324-5353)
- Revised in Drawings/1:36 Undecorated Section:
- All GMD SD40-2(W) right-side views (rear underframe detail)
- Added 114 GP38-2 drawings to database in Drawings/1:55 Undecorated Section
2010-08-01
- Added 66 photos in Photos section (see Photo Updates - 2010-08 section)
2010-07-12
- Added 134 photos in Photos section (see Photo Updates - 2010-07 section)
2010-07-18
- Fixed several dozen broken links around the site (mainly photos)
- Upgraded page validation and DOCTYPE to HTML 4.01 Strict from HTML 4.01 Transitional
2010-07-12
- Added 273 photos in Photos section (see Photo Updates - 2010-07 section)
2010-06-28
- Added 198 photos in Photos section (see Photo Updates - 2010-06 section)
2010-06-24
- Added in Drawings/1:36 Undecorated Section:
- 8 MLW M-630 drawings (CP versions)
- 8 MLW M-636 drawings (CP versions)
2010-06-20
- Added in Drawings/1:36 Undecorated Section:
- 8 GMD F7A drawings (CN versions)
- 6 EMD/GMD F7Au drawings (CN versions)
- 2 GMD F7Bu drawings (CN version)
- 2 GMD FP7A drawings (CP version)
- 4 EMD SD38 drawings (DTI versions)
- 8 GE U23B drawings (CR, LV and PC versions)
- 4 GE U30B drawings (CO versions)
- 2 GE Dash 8-41CW drawings (UP version).
- Added in Drawings/1:36 Painted Section:
- CN #9098 (GMD F7A)
- PW #3004 (GE B30-7AB)
- WP #3512 (EMD GP40)
- WP #3524 (EMD GP40)
2010-06-14
- Added all 1:55 GP30, GP30B, GP30 RDMT, GP35 and GP35 RDMT drawings to database in Drawings/1:55 Undecorated Section:
2010-06-13
- Added in Drawings/1:36 Undecorated Section:
- 6 EMD GP38-2 drawings (PW and TM versions)
- 8 EMD GP40-2 drawings (DRGW, KCS and RFP versions)
- 16 GE Dash 8-40CW drawings (ATSF, CR, LMSX and UP versions)
2010-05-26
- Added in Drawings/1:36 Undecorated Section:
- 6 EMD GP40 drawings (WP versions)
- Revised in Drawings/1:36 Undecorated Section:
- Labels for EMD GP40 Phase 1 drawings (Phase 1a and 1b relabelled as Phase 1a1 and 1a3 respectively)
- EMD GP40, NYC versions (added Leslie SL-3L-R horn)
2010-05-24
- Added in Drawings/1:36 Undecorated Section:
- 16 EMD GP38 drawings (PC and PRSL versions)
- 8 MLW M420R drawings
- Added in Drawings/1:36 Painted Section:
- NS #9398 (GE Dash 9-40CW)
- PW #2001 (MLW M420R)
- PW #2005 (MLW M420R)
2010-05-21
- Added in Drawings/1:36 Undecorated Section:
- 1 GE Dash 9-40CW drawing (NS 9745-9841 right-side view)
- Revised in Drawings/1:36 Undecorated Section:
- GE Dash 9-40CW right-side views (electric handbrake added, where applicable)
2010-05-21
- Added in Drawings/1:36 Painted Section:
- BNSF #7706 (GE ES44DC)
2010-05-01
- Added in Drawings/1:36 Undecorated Section:
- 15 GE ES44AC drawings (BNSF versions)
2010-04-29
- Continued updates in Locomotive Phases Section
- Added GE ES phases in Locomotive Phases Section
2010-04-28
- Added in Drawings/1:36 Undecorated Section:
- 5 EMD GP40 drawings (NYC versions)
- 2 SD40-2 Rebuild drawings (NREX 9402)
- Revised in Drawings/1:36 Undecorated Section:
- 2 EMD GP40 drawings (PC version - lower fan height)
- Added 164 photos in Photos section (see Photo Updates - 2010-04 section)
2010-04-27
- Updated Locomotive Phases Section
- Revised in Drawings/1:36 Undecorated Section:
- All previous EMD SD38-2, SD40-2, SD40T-2 and SD45T-2 drawings with standard steps (revised step height)
2010-04-25
- Added in Drawings/1:36 Undecorated Section:
- 12 EMD SD45T-2 drawings
- Revised in Drawings/1:36 Undecorated Section:
- All previous SD45 drawings (hood door size, handrail stanchion spacing)
2010-04-24
- Added in Drawings/1:36 Undecorated Section:
- 12 EMD SD40T-2 drawings (SP versions)
2010-04-22
- Added in Drawings/1:36 Undecorated Section:
- 4 EMD GP40X drawings (SP versions)
2010-04-21
- Added in Drawings/1:36 Undecorated Section:
- 8 EMD GP40X drawings (UP versions) - from 2009, but previously not online
- 2 EMD GP40-3 drawings (QGRY 3800)
- 2 EMD RM-1 drawings (HCRY 802, SLR 803) - from 2008, but previously not online
2010-04-20
- Added in Drawings/1:36 Undecorated Section:
- 6 GE B23-7 drawings (CR versions)
- Revised in Drawings/1:36 Undecorated Section:
- All existing B23-7, B30-7A, B30-7AB and B36-7 drawings (reduced walkway height)
2010-04-18
- Introduced revised table appearance for drawings and photos
- Added in Drawings/1:36 Undecorated Section:
- 6 EMD GP40 drawings (LLPX and RI versions)
- 6 GE ES44AC drawings (KCS/KCSM versions)
2010-04-17
- Added in Drawings/1:36 Painted Section:
- MEC #506 (GMD GP40-2L(W))
- MEC #511 (GMD GP40-2(W))
- Added in Drawings/1:36 Undecorated Section:
- 4 GMD GP40-2L(W) drawings (MEC versions)
- 2 GMD GP40-2(W) drawings (MEC version)
- 10 GE U30C drawings (BN Phase 2f1 and 2h2 versions)
- 6 GE ES44DC drawings (BNSF and CN versions)
2010-04-16
- Added in Drawings/1:36 Painted Section:
- BM #690 (EMD SD39)
- Converted Drawings Section to database search
2010-04-14
- Added in Drawings/1:36 Undecorated Section:
- 2 SD38 drawings (PC version)
- 8 SD39 drawings (ITC and SP versions)
- 8 SD40 drawings (BO/CO and SOU versions)
- 8 SD45 drawings (NW, PC, PRR and SOU versions)
2010-04-03
- Upgraded Photo Search in Photos section
2010-04-02
- Added 118 photos in Photos section (see Photo Updates - 2010-04 section)
2010-04-01
- Added new database search for Recordings in Recordings section
2010-03-31
- Revised underlying code for all pages
- Header, footer and left column stored in external files added with PHP include function
- "Last updated" date automatically calculated
2010-03-27
- Added "Simple Search" features in Photos section
- Added 57 new photos in Photos section (see Photo Updates - 2010-03 section)
2010-03-26
- Revised code in Photo Search page
- Added 36 photos from 2006 in Photos section (see Photo Updates - 2010-03 section)
2010-03-16
- Added in Drawings/1:36 Undecorated Section::
- 20 F3A drawings (generic, CN, GTW, MTSL and PRR versions)
- 8 F3B drawings (generic and CN versions)
- 2 F7A drawings (generic version) - includes 4000th drawing
- Revised in Drawings/1:36 Undecorated Section:
- 2 GP38-2 drawings (DS versions: added rerailer)
- 2 GP38-2 drawings (DS versions: added rerailer)
2010-03-11
- Added 104 new photos in Photos section (see Photo Updates - 2010-03 section)
2010-02-24
- Added in Drawings/1:36 Undecorated Section:
- 8 GP38-2 drawings (CEIX, DS and TPW versions)
- Added in Drawings/1:36 Undecorated Section:
- 2 C36-7 drawings (CR version)
- Added in Drawings/1:36 Undecorated Section:
- 2 2GS14B drawings (DGNO version)
- 6 3GS21B drawings (BNSF and USAX versions)
2010-01-30
- Added Drawings/1:36 Colours section
- Added in Drawings/1:36 Undecorated Section:
- 5 SD75M drawings (ATSF and BNSF versions)
- 2 SD75I drawings (BNSF version)
- Added in Drawings/1:36 Undecorated Section:
- 4 SD70ACe drawings (UP Phase 2d1, 2e versions)
- Added in Drawings/1:36 Undecorated Section:
- 4 C30-7 drawings (LN Phase 1 versions)
- Added in Drawings/1:36 Painted Section:
- ATSF #205 (EMD SD75M)
- DRGW #5514 (EMD SD50)
2010-01-29
- Introduced revised site layout and colours
- Converted site pages from HTML to PHP files
2010-01-06
- Performed re-count of 1:55 drawings (new total: 3242; previous total: 3265)
- Revised all GMD GP40-2(W) and GP40-2L(W) drawings in Drawings/1:36 Undecorated Section
- Added 16 GMD SD40-2(W) drawings in Drawings/1:36 Undecorated Section
2010-01-04
- Created Drawings/1:36 Text and Logos section
Past Updates - 2009
2009-12-27
- Created separate lists for 1:36 ALCO and MLW locomotives
- Listed Builders for 1:36 drawings alphabetically rather than hierarchically
- Added in Drawings/1:36 Undecorated Section:
- 15 M420 drawings (CN versions)
2009-12-23
- Added in Drawings/1:36 Undecorated Section:
- 2 SD70I drawings
- 2 SD70M drawings (SP version)
- 5 SD75I drawings (CN versions)
- Added in Drawings/1:36 Painted Section:
- CR #6781 (ALCO C636)
- PC #6342 (ALCO C636)
- SP #5510 (EMD SD50)
- SP #5514 (EMD SD50)
- SP #9800 (EMD SD70M)
2009-12-13
- Added in Drawings/1:36 Undecorated Section:
- 4 C636 drawings (IC and SPS versions)
- Revised in Drawings/1:36 Undecorated Section:
- All existing C636 drawings
- Added in
- Added in Drawings/1:36 Painted Section:
- CR #6416 (EMD SD40-2)
- IC #1101 (ALCO C636)
- PC #6337 (ALCO C636)
2009-12-11
- Added in Drawings/1:36 Undecorated Section:
- 4 SW1000 drawings (DRGW versions)
- 2 SW1500 drawings (VTR version)
- 2 GP38-2 drawings (LV version)
- 2 GP39-2 drawings (DH version)
- 10 SD40-2 drawings (BN and CNW versions)
2009-12-09
- Added in Drawings/1:36 Undecorated Section:
- 4 C636 drawings (DL and PC versions)
- 8 MP15AC drawings (LN/SCL, MILW and MKT versions)
2009-12-04
- Updated all remaining drawing pages to CSS layout
2009-12-01
2009-11-30
- Added "Train Drawings - Railroad Diagrams" category in Links section
2009-10-03
- Major update completed
- Continued work on CSS-based page design and formatting
- Added in
- Added in Drawings/1:36 Painted Section:
- CP #8201 (GMD GP9u) and #8492 (GMD GP9u)
- IC #8733 (EMD GP11)
- MP #1518 (EMD SW1500)
- PC #3171 (EMD GP40) and #7943 (EMD GP38-2)
- Added in Drawings/1:36 Undecorated Section:
- 2 SW1500 drawings (MP version)
- 14 GP9u drawings (CP versions)
- 4 GP38-2 drawings (PC versions)
- 2 GP40 drawings (PC version)
2009-09-28
- Continued work on CSS-based page design and formatting
2009-09-25
- Introduced new CSS-based page design and formatting
2009-07-29
- Added 20 photos in Photos section
2009-07-26
- Added in Drawings/1:36 Undecorated Section:
- 8 GP38-2 drawings (LN and RI versions)
- 4 hopper car drawings (Trentonworks 5250 cu-ft)
- Added in Drawings/1:36 Painted Section:
- CN #388530 (covered hopper)
2009-07-11
- Added 167 photos in Photos section
2009-07-08
- Added 98 photos in Photos section
2009-07-07
- Added 58 photos in Photos section
2009-06-25
- Added in Drawings/1:36 Painted Section:
- CN #9402 (GMD GP40-2L(W))
- CP #8534 (GMD GP9)
- EJE #702 (EMD GP38-2)
- EJE #661 (EMD SD38-2)
- SBD #5880 (GE B36-7)
- TM #1179 (EMD GP40M-3)
- Added in Drawings/1:36 Undecorated Section:
- 4 B36-7 drawings (SBD versions)
2009-06-08
- Added 42 photos in Photos section
2009-06-04
- Added in Drawings/1:36 Undecorated Section:
- 2 SW1500 drawings (PLE versions)
2009-06-03
- Added in Drawings/1:36 Undecorated Section:
- 8 SW1500 drawings (EMDX and SAN versions)
- Revised in Drawings/1:36 Undecorated Section:
- All SW1500 left-side views with hood-mounted handrails (added handrail section near cab)
2009-06-01
- Updated Film Reviews section
- Continued conversion to new fonts and navigation icons
2009-05-31
- Continued conversion to new fonts and navigation icons
2009-05-30
- Updated Site Map
- Started preliminary trials of new fonts and navigation icons
- Added in Drawings/1:36 Undecorated Section:
- 12 SW1500 drawings (IU, KIT, PC and TRRA Phase 2a versions)
- Added in Locomotive Phases section:
2009-05-28
- Introduced Trainiax logo
- Added in Drawings/1:36 Undecorated Section:
- 22 SW1500 drawings (LN, SP, TPW, TRRA and WP versions)
- Added in Drawings/1:36 Painted Section:
- NW #1969 (EMD SD40-2)
- UP #3459 (EMD SD40-2)
2009-05-07
- Added in Drawings/1:36 Painted Section:
- CN #2646 (GE Dash 9-44CW)
- IAIS #502 (GE ES44AC)
- Added in Drawings/1:36 Undecorated Section:
- 2 FP45 drawings (ATSF version)
2009-05-04
- Added in Drawings/1:36 Undecorated Section:
- 10 ES44AC drawings (CEMX, CSXT, IAIS and NS versions)
2009-05-01
- Added in Drawings/1:36 Undecorated Section:
- 18 AC4400CW drawings (CP and UP Phase 2a through 2c versions)
- 2 GP38-2 drawings (BN Phase 2c version)
2009-04-22
- Added in Drawings/1:36 Undecorated Section:
- 26 EMD GP11 drawings (all variations except IC 8720)
- 8 GP38-2 drawings (EJE, KCS and PLE versions)
- 4 B30-7A drawings (MP versions)
- 2 C30-7A drawings
2009-04-11
- Revised in Drawings/1:36 Undecorated Section:
- All EMD GP38, GP39, GP40, GP40M-3 and RM-1 drawings (traction motor cables, fuel cutoff switch, air reservoir tilt, radiator intake length, fuel tank height)
- Most EMD GP38-2, GP39-2 and GP40-2 right-side views (same modifications as above, plus rear hood door spacing)
2009-04-02
- Added 12 photos in Photos section (previously online but not indexed)
- Corrected reporting mark error for ICMX section in Photos section (previously listed as IMCX)
2009-04-01
- Added 33 photos in Photos section
2009-03-31
- Added 222 photos in Photos section
2009-02-17
- Added in Drawings/1:36 Undecorated Section:
- 6 ES40DC drawings (NS 7580-7616, 7617-7655, 7656-7719)
- 12 ES44DC drawings (BNSF 7505-7527, 7528-7604, 7605-7799; CSXT 5200-5299, 5300-5399, 5400-5501)
2009-02-15
- Added in Drawings/1:36 Undecorated Section:
- 5 ES40DC drawings (NS 7500-7514, 7515-7564, 7565-7579)
- Revised in Drawings/1:36 Undecorated Section:
- All Dash 9-40CW drawings (headlight, cab roof grabiron)
2009-02-02
- Added in Drawings/1:36 Undecorated Section:
- 5 Dash 9-40CW drawings (NS 9719-9744, 9887-9978 both sides; 9745-9886 right-side view)
- Revised in Drawings/1:36 Undecorated Section:
- 2 Dash 9-40CW drawings (NS 9745-9841, 9842-9886 left-side views) - step wells
- 6 Dash 9-44CW drawings (CN 2200-2205, 2673-2696, 2697-2726) - step wells
2009-02-01
- Added in Drawings/1:36 Undecorated Section:
- 16 Dash 9-40CW drawings (all NS versions except 9887-9978)
- 10 Dash 9-44CW drawings (all CN versions except 2500-2522)
2009-01-15
- Continued conversion to ISO:8601 standard for all dates on site
- Continued conversion to simplified text font and formatting for all site pages
2009-01-04
- Added in Drawings/1:36 Undecorated Section:
- 2 C30-7 drawings (CR version)
- Added in Drawings/1:36 Painted Section:
- CN GP40-2L(W) #9434
- Started conversion to ISO:8601 standard for all dates on site
- Started conversion to simplified text font and formatting for all site pages
- Introduced completed/revised dates on drawings
Past Updates - 2008
2008-12-30
- Added in Drawings/1:36 Undecorated Section:
- 4 GP9 drawings (CP versions)
- 2 GP40-2 drawings (DRGW version)
- 10 SD40-2 drawings (CR and NDM versions)
- 4 B23-7 drawings (ARN / CSP / IR versions)
- Added in Drawings/1:36 Painted Section:
- DRGW SD40T-2 #5411
2008-12-21
- Added in Drawings/1:36 Undecorated Section:
- 32 GP9 drawings
- 26 GP9RM drawings
- Added in Drawings/1:36 Painted Section:
- BO GP40-2 #4427
- CN GP9 #4220
- CN GP9 #4425
- CV GP9 #4447
- GTW GP9 #4435
- LIRR DE30AC #514
- SOU B23-7 #3999
2008-12-02
- Added in Drawings/1:36 Undecorated Section:
- 2 DM30AC drawings
2008-11-28
- Added in Drawings/1:36 Undecorated Section:
- 2 DE30AC drawings
- 6 C425 drawings (EL, NW and PRR Phase 1 versions)
2008-11-06
- Added 158 photos in Photos section
2008-10-26
- Major update in progress
- Started re-vamp of Recordings section
- Added 4 recordings from mid-2007 (SLR 804 and 3202 leading)
- Edited (sound/volume balance) 26 recordings from all years (specified in recordings pages)
2008-10-17
- Added in Drawings/1:36 Undecorated Section:
- 2 EMD SD70M drawings (UP Phase 2e3 version)
2008-10-16
- Added in Drawings/1:36 Undecorated Section:
- 4 GE B23-7 drawings (SOU versions)
- 2 GE B30-7AB drawings
- 2 EMD SD40-2 drawings (BO version)
- 27 EMD SD70M drawings (UP versions)
- 2 EMD SD70ACe drawings (MRL version)
- Added Drawings/1:36 Road Vehicles Section
- Added 2 car drawings (Subaru Legacy) in Drawings/1:36 Road Vehicles Section
- Revised Locomotive Phases section
2008-09-24
- Added 122 photos in Photos section
2008-09-22
- Added 269 photos in Photos section
2008-09-14
- Added 101 photos in Photos section
2008-09-06
- Added in Drawings/1:36 Undecorated Section:
- 8 GE U30C drawings
- 14 GE B23-7 drawings
- Revised in Drawings/1:36 Undecorated Section:
- All GE C30-7 drawings
- Added 1:36 Parts Section
- Removed by request KSCX U30C from Drawings/Painted Contributed Locomotives
2008-09-05
- Added 75 photos in Photos section
2008-08-21
- Added 2 MP15AC drawings in Drawings/1:36 EMD MP15 Section
- Added 10 GP38-2(W) drawings in Drawings/1:36 EMD GP38, GP39 Section
- Added 6 GP40-2L(W) drawings in Drawings/1:36 EMD GP40 Section
- Added NSC 5140 cu-ft boxcar drawing in Drawings/1:36 Boxcars Section
- Added Greebrier 53' well car drawing in Drawings/1:36 Flatcars, Intermodal Section
2008-07-11
- Major update completed
- Added 580 photos in Photos section
2008-06-17
- Added 24 SD40-2 drawings (BN and UP versions) and 2 SD40-2S drawings (UP version) in Drawings/1:36 EMD SD40 Section
- Added 2 SD70ACe drawings (FXE version) in Drawings/1:36 EMD SD70 Section
2008-06-07
- Revised existing GP39-2 drawings (BN version - fuel tank, mirrors, rear pilot, sand hoses) in Drawings/1:36 EMD GP38, GP39 Section
- Added 2 GP39-2 drawings (BN version 2) in Drawings/1:36 EMD GP38, GP39 Section
- Added BN GP39-2 #2716 in Drawings/1:36 Painted Locomotives Section
2008-06-04
- Added 2 GP39-2 drawings (BN version) in Drawings/1:36 EMD GP38, GP39 Section
- Added 10 SD38-2 drawings (BLE, CNW, LN and SP versions) in Drawings/1:36 EMD SD38, SD39 Section
- Added 4 SD70ACe drawings (UP versions) in Drawings/1:36 EMD SD70 Section
- Added UP SD70ACe's #1995 and #8321 in Drawings/1:36 Painted Locomotives Section
2008-06-02
- Added 121 photos in Photos section
2008-05-08
- Added 54 photos in Photos section
2008-05-06
- Added 141 photos in Photos section
2008-04-29
- Added 4 GP40-2(W) drawings in Drawings/1:36 EMD GP40 Section
- Added 4 SD38-2 drawings (EJE versions) in Drawings/1:36 EMD SD38, SD39 Section
- Added 13 SD40-2 drawings (CNW, NW and RI versions) in Drawings/1:36 EMD SD40 Section
- Added 10 SD40T-2 drawings (DRGW versions) in Drawings/1:36 EMD SD40 Section
2008-04-13
- Added 130 photos in Photos section
2008-04-12
- Added 59 photos in Photos section
2008-04-??
- Added 52 photos in Photos section
2008-04-02
- Major update completed
- Added 326 new photos in Photos section
2008-04-01
- Added 8 GP38-2 drawings (GMO and VTR versions) and 6 GP38/GP38AC drawings (LV and SOU versions) in Drawings/1:36 EMD GP38, GP39 Section
- Added 4 GP40-2 drawings (BO-CO Phase 2c/2d versions) in Drawings/1:36 EMD GP40 Section
2008-03-26
- Added 14 GP40-2 drawings (BO/CO/WM, BM and RDG versions) in Drawings/1:36 EMD GP40 Section
- Added 8 GP38-2 drawings (BM and SOU versions) and 2 GP39-2 drawings (RDG version) in Drawings/1:36 EMD GP38, GP39 Section
2008-03-21
- Added description of 1:36 series in Drawing History
- Added 4 GP40-2 drawings (BO and TOE versions) in Drawings/1:36 EMD GP40 Section
- Added 3 painted locomotives (AWP #733, GA #755 and GA #756) in 1:36 Painted Locomotives Section
2008-03-14
- Added 2 GP39 drawings (ASAB version) in Drawings/1:36 EMD GP38, GP39 Section
- Added 10 GP40 drawings (AWP-GA-WRA, DQE and TOE versions) and 4 GP40-2 drawings (BO-CO and AWP-GA-WRA versions) in Drawings/1:36 EMD GP40 Section
2008-03-12
- Added 2 GP40 drawings (BO Phase 1b version) in Drawings/1:36 EMD GP40 Section
- Created Drawings/1:36 EMD GP38, GP39 Section
- Added 4 GP38 drawings and 2 GP39 drawings in Drawings/1:36 EMD GP38, GP39 Section
- Added 2 crossing signal drawings (USA versions) in 1:36 Lineside Structures and Equipment Section
2008-03-09
- Added 6 C30-7 drawings (BN versions with GSC trucks) in Drawings/1:36 GE Dash-7 Section
2008-03-08
- Added 4 C30-7 drawings (BN Phase 2a and 2c versions) in Drawings/1:36 GE Dash-7 Section
2008-03-07
- Created Drawings/1:36 GE Dash-7 Section
- Added 2 C30-7 drawings in Drawings/1:36 GE Dash-7 Section
- Created table classification system for 1:36 drawings
2008-03-04
- Created 1:36 Painted Locomotives Section
- Created 1:36 Lineside Structures and Equipment Section
- Added SLR #3804 in 1:36 Painted Locomotives Section
- Added 2 crossing signal drawings (Canadian versions) in 1:36 Lineside Structures and Equipment Section
2008-03-03
- Added 6 GP40 drawings (BO/CO versions) and 2 GP40M-3 drawings (TM 1174) in Drawings/1:36 EMD GP40 Section
- Revised existing 1:36 GP40M-3 and RM-1 drawings (grabiron placement, MU hoses, speed recorder cables, coupler outlines and numberboards) in Drawings/1:36 EMD GP40 Section
2008-02-28
- Added 119 new photos in Photos section
2008-02-26
- Added 2 GP40M-3 drawings (GNWR 3801-3803) and 2 RM-1 drawings (QGRY 800-801) in Drawings/1:36 EMD GP40 Section
2008-02-25
- Major update completed
- Introduced 1:36 drawing series
- Revamped Drawings section
- Added 8 GP40M-3 and 4 RM-1 drawings in Drawings/1:36 EMD GP40 Section
2008-02-21
- Added 144 new photos in Photos section
2008-02-20
- Added 92 new photos in Photos section
2008-02-19
- Added 80 new photos in Photos section
2008-02-18
- Added 1 redrawn C36-7 drawing (now CR left-side view) in Drawings/GE Section
- Added 3 new C36-7 drawings (CR right-side view and NW version) in Drawings/GE Section
- Added 15 C30-7 drawings (LN and SCL versions) in
2008-02-17
- Added 2 C30-7A drawings in Drawings/GE Section
- Added 72 new photos in Photos section
2008-02-16
- Added 16 redrawn C30-7 drawings (CR and UP versions) in Drawings/GE Section
- Added 2 new C30-7 drawings (NW version) in Drawings/GE Section
2008-02-14
- Added 4 new GP40 drawings (NYC Phase 1a and B&O Phase 2b versions) in Drawings/EMD Section
- Added 2 redrawn GP40 drawings (NYC Phase 1b version) in Drawings/EMD Section
- Added 5 new C424 drawings (EL, PRR and RDG versions) in Drawings/ALCO-MLW-BBD Section
- Added 1 redrawn C424 drawing (now PRR left-side view) in Drawings/ALCO-MLW-BBD Section
2008-02-13
- Added 6 C630 drawings (C&O and RDG versions) in Drawings/ALCO-MLW-BBD Section
2008-02-12
- Added 24 new photos in Photos section
2008-02-11
- Added 28 new photos in Photos section
2008-02-09
- Added 1 redrawn C424 drawing (now GBW Phase 1 left-side view) in Drawings/ALCO-MLW-BBD Section
- Added 1 new C424 drawing (GBW Phase 1 right-side view) in Drawings/ALCO-MLW-BBD Section
- Added 4 redrawn GP38-2W drawings in Drawings/EMD Section
- Added FURX GP40M-3 #1176, LSRC GP40M-3 #1164 and TM GP40M-3's #1163, #1164, #1166, #1173, #1177 and #1178 in Drawings/Painted Locomotives section
2008-02-08
- Revised all existing TM GP40M-3 drawings (speed recorder, fans, ditch lights, battery box louvers) in Drawings/EMD Section
2008-02-07
- Added 4 C628 drawings (LN versions) and 4 C630 drawings (NW and PRR versions) in Drawings/ALCO-MLW-BBD Section
- Revised all existing C628 drawings (fuel filler, air reservoirs, trucks) in Drawings/ALCO-MLW-BBD Section
2008-02-06
- Added 97 new photos in Photos section
2008-02-05
- Added 6 new C628 drawings (ACL and NW versions) in Drawings/ALCO-MLW-BBD Section
- Added 6 redrawn GP40 drawings (B&O versions), 16 revised GP40M-3 drawings (TM versions), 12 revised GP40-2LW drawings (CN, HRCY and MEC versions) and 14 revised GP40-2W drawings (CN, GOT and MEC versions) in Drawings/EMD Section
2008-02-03
- Added 11 new C628 drawings in Drawings/ALCO-MLW-BBD Section
- Added 1 redrawn C628 drawing (now LV Phase 2b version) in Drawings/ALCO-MLW-BBD Section
2008-01-31
- Added 118 new photos in Photos section
2008-01-29
- Repaired broken Site Map link
- Added 60 new photos in Photos section
2008-01-24
- Added 130 new photos in Photos section
2008-01-18
- Added 1 redrawn C425 drawing (NW left-side view) and 1 redrawn C424 drawing (TPW left-side view) in Drawings/ALCO-MLW-BBD Section
- Added 3 new C425 drawings (NW right-side view and PRR version) and 3 new C424 drawings (TPW right-side view and GBW version) in Drawings/ALCO-MLW-BBD Section
2008-01-14
- Major site update completed
- Added new contact information (new email address: eby_michael@sympatico.ca)
- Added 19 new hopper car drawings from 2007 (ACF 2700, 2971, 2980, 3200 and 3560 cu-ft, PS 3002, 4427, 4650 and 4750 cu-ft) in Drawings/RS Section
- Added 2 redrawn hopper car drawings from 2007 (PS 4427, PS 4750) in Drawings/RS Section
- Added 1 new boxcar drawing from 2007 (NSC 5380 cu-ft) in Drawings/RS Section
- Added 2 redrawn boxcar drawings from 2007 (TWI 6269 cu-ft) in Drawings/RS Section
- Added 1 new hopper car drawing from 2008 (TRN 3621 cu-ft) in Drawings/RS Section
- Added 4 SD70ACe drawings from 2007 (BNSF and KCS versions) and 4 SD70M-2 drawings (NS and FEC versions) in Drawings/EMD Section
- Added 4 redrawn SD70M-2 drawings from 2007 (CN and NS versions) in Drawings/EMD Section
- Added 1 new C425 drawing from 2008 (EL right-side view) in Drawings/ALCO-MLW-BBD Section
- Added 1 redrawn C425 drawing from 2008 (EL left-side view) in Drawings/ALCO-MLW-BBD Section
- Revised all existing M420(W) drawings (CN versions) in Drawings/ALCO-MLW-BBD Section
Past Updates - 2007
2007-12-22
- Added 2 new hopper car drawings (NACC 2785 cu-ft Phase 1) and TTX Front Runner (leaf springs) in Drawings/RS Section
2007-12-21
- Added 3 new hopper car drawings (NACC 2785 cu-ft) and 1 well car drawing (CN Transcona 5-unit set) in Drawings/RS Section
2007-12-17
- Added 3 new hopper car drawings (ACF 3500 cu-ft) in Drawings/RS Section
2007-12-15
- Added 8 new SD70ACe drawings (top views) in Drawings/EMD Section
- Revised all existing SD70ACe drawings (fans, exhaust stack, rear hood end, grabirons) in Drawings/EMD Section
2007-12-10
- Added 2 new SD70ACe drawings (BNSF 9330-9369) in Drawings/EMD Section
- Added 2 redrawn SD70ACe drawings (BNSF 9370-9399) in Drawings/EMD Section
2007-12-09
- Added 2 new SD70ACe drawings (KCS 4030-4059) in Drawings/EMD Section
- Added 2 redrawn SD70ACe drawings (KCS 4000-4029) in Drawings/EMD Section
2007-12-08
- Added 2 new SD70ACe drawings (UP 8521-8620) in Drawings/EMD Section
- Added 4 redrawn SD70ACe drawings (FXE 4000-4014 and UP 8424-8520) in Drawings/EMD Section
2007-12-07
- Added Trinity 23,589-gallon tank car in Drawings/RS Section
- Added 4 redrawn SD70ACe drawings (MRL and early UP versions) in Drawings/EMD Section
2007-11-30
- Added 124 new photos in Photos section
2007-11-24
- Added 39 previously unindexed photos in Photos section
2007-11-23
- Added 18 previously unindexed photos in Photos section
- Added 95 new photos in Photos section
2007-11-22
- Added 10 previously unindexed photos in Photos section
- Added detailed Site Stats section
2007-11-21
- Added 47 new photos in Photos section
2007-11-19
- Added 68 new photos in Photos section
2007-11-18
- Major update completed
- Added 125 photos in Photos section (see reporting mark index)
- Added camera information in Photos section (new camera in use as of November 09, 2007)
2007-11-16
- Added 7 new hopper car drawings (Ingalls 5750 cu-ft and RTC 4750 and 5800 cu-ft) in Drawings/RS Section
2007-10-28
- Added 2 new hopper car drawings (PS 3506 cu-ft) in Drawings/RS Section
2007-10-27
- Added 16 new hopper car drawings (PS 2003 cu-ft and PS/GSC 2893 cu-ft variations) in Drawings/RS Section
- Added new images of freight car trucks and locomotive plows in Drawing Parts Section
2007-10-14
- Added 7 new hopper car drawings (ACF 4460 and 4650 cu-ft variations) in Drawings/RS Section
- Added 2 redrawn hopper car drawings (ACF 4460 and 4650 cu-ft variations) in Drawings/RS Section
2007-10-13
- Added 2 hopper car drawings (NSC 3800 cu-ft and Procor 3800 cu-ft pressurized) in Drawings/RS Section
- Added 1 painted hopper car drawing (NAHX 320089) in Drawings/Painted RS Section
2007-10-12
- Added 8 hopper car drawings (NSC 5800, 5810, 5847, 6245 and 6400 cu-ft) in Drawings/RS Section
2007-10-06
- Added 1 redrawn flatcar drawing (now NSC 73' Centerbeam, risers, version 3) in Drawings/RS Section
- Added 1 new hopper car drawing (Procor 3300 cu-ft, CN version 2) and 2 new flatcar drawings (NSC 73' Centerbeam, risers, versions 1 and 2) in Drawings/RS Section
- Added 1 redrawn painted hopper car drawing (CGLX 386) in Drawings/Painted RS Section
- Added 2 new painted hopper car drawings (CGLX 494 and UNPX 120960) in Drawings/Painted RS Section
2007-09-29
- Added 2 hopper car drawings (Procor 3300 cu-ft pressurized) and 2 gondola car drawings (NSC 2430 cu-ft) in Drawings/RS Section
2007-09-25
- Added 5 hopper car drawings (Thrall/Trinity 3230 cu-ft and Evans 4780 cu-ft) in Drawings/RS Section
2007-09-17
- Added 3 hopper car drawings (Trinity 5161 cu-ft) and 1 tank car drawing (UTLX 13,600 version 5) in Drawings/RS Section
- Added 2 painted tank car drawings (UTLX 11268 and 11864) in Drawings/Painted RS Section
2007-09-08
- Added 51 previously non-indexed photos and 24 new photos (see Photos section for details)
2007-08-31
- Added 8 new tank car drawings (Procor/UTLX 13,600-gallon) in Drawings/RS Section
- Added redrawn Gunderson "Maxi-Stack I" well car in Drawings/RS Section
2007-08-24
- Revised existing FMC boxcar drawings (minor detail and dimension corrections) in Drawings/RS Section
- Added 4 hopper car drawings (Procor 2900 cu-ft version 1) in Drawings/RS Section
2007-08-23
- Added BNSF #563186 (NSC 73' Centerbeam) in Drawings/Painted RS Section
2007-08-22
- Added 3 new centerbeam car drawings (NSC 73') in Drawings/RS Section
2007-08-17
- Added 7 new painted 40' container drawings (CHPU, CZLU, HJCU, KKFU, KLFU, KNLU and SENU) and 3 new painted 20' container drawings (DVRU, HLXU and LTIU) in Drawings/Painted Containers-Trailers Section
2007-08-16
- Added 10 new painted 20' container drawings (AFRO, ACXU, CASU, CBHU, CHPU, CZLU, EMCU, KKTU and UGMU) in Drawings/Painted Containers-Trailers Section
2007-08-15
- Added 8 new GP9 drawings (C&O and FEC versions) in Drawings/EMD Section
- Added 2 new hopper car drawings (ACF 4650 cu-ft Phase 1a) in Drawings/RS Section
- Added 4 new container drawings (12G1, 22G0, 42G0 version 1 and L5G1 version 2) in Drawings/Containers-Trailers Section
- Reclassified existing container drawings (added ISO size-type codes) in Drawings/Containers-Trailers Section
2007-08-11
- Added 4 redrawn and 4 new GP9 drawings (B&O versions) in Drawings/EMD Section
2007-07-30
- Added 32 redrawn SD40-2 drawings, 2 redrawn SD38-2 drawings and 6 redrawn GP9RM drawings in Drawings/EMD Section
- Added 30 new GP9RM drawings and 6 new SD40-2 drawings (KCS and UP versions) in Drawings/EMD Section
- Added CN GP9RM's 4111 (replacing 4021), 4116, 7003, 7074, 7211 and 7253 in Drawings/Painted Locomotives section
2007-07-13
- Added 4 redrawn painted drawings (BN 6811, 8011, 8155 and CNW 6910) in Drawings/Painted Locomotives section
2007-07-12
- Created new classification and file-naming system for painted drawings (to apply to drawings as they are revised)
- Added 5 redrawn painted drawings (BN 7800, UP 3537, 3593, 3699 and 4049) in Drawings/Painted Locomotives section
2007-07-07
- Added in Drawings/EMD Section:
- 81 redrawn EMD SD40-2 drawings (ATSF, BN, B&O, CNW, ICG, KCS, LN, MP Phase 1b and 2b, and UP versions)
- 14 redrawn GMD SD40-2 drawings (CP versions)
- 14 redrawn SD40 drawings (C&O Phase 1a1, CRR, GM&O, PRR, SP Phase 1a2, UP Phase 1a2 and WM versions)
2007-06-08
- Added 58 photos
2007-06-07
- Added 3 new and 1 redrawn GP15-1 drawings (CNW and SLSF versions) in Drawings/EMD Section
- Revised all existing GP15-1 drawings (minor detail corrections) in Drawings/EMD Section
- Added MP GP15-1 #1690 in Drawings/Painted Locomotives section
2007-05-07
- Revised 1 GE C30-7 to 2007 detail standards (BN Phase 1 left side view) in Drawings/GE Section
- Added BNSF ACF 4650 cu-ft hopper #403367 in Drawings/Painted RS Section
2007-05-06
- Added 2 ACF Phase 1c 4650 cu-ft hopper cars in Drawings/RS Section
2007-05-05
- Added 2 ARI 3425 cu-ft and JA/FA 3200 cu-ft hopper cars in Drawings/RS Section
2007-05-04
- Added 5 Phase 1b and 1c ACF 2970 cu-ft hopper cars in Drawings/RS Section
2007-05-03
- Added 4 Phase 1b and 1c ACF 4460 and 4650 cu-ft hopper cars (2 of which replace old drawings) in Drawings/RS Section
2007-05-02
- Added 10 ACF 4650 cu-ft hopper cars (2 of which replace old drawings) in Drawings/RS Section
2007-04-29
- Added FMC 4692 and 4700 cu-ft hoppers in Drawings/RS Section
2007-04-26
- Added Trinity 4207 cu-ft coal hopper in Drawings/RS Section
2007-04-25
- Added Trinity 70' HD flat and TTX Front Runner in Drawings/RS Section
- Added UNPX 2900 cu-ft hopper #120765 in Drawings/Painted RS Section
2007-04-22
- Added 6 hopper car drawings (NSC 2900 cu-ft, P75 2900 and 3000 cu-ft and Thrall 3250 cu-ft) in Drawings/RS Section
- Added 1 redrawn hopper car drawing (now NSC 2900 cu-ft with roof rails) in Drawings/RS Section
2007-04-07
- Added UP AC4400CW #5701 in Drawings/Painted Locomotives section
- Added redrawn UP AC4400CW's #6608 and #5952 in Drawings/Painted Locomotives section
2007-04-06
- Added 2 AC4400CW drawings (UP Phase 1b2 right-side view and Phase 2b #2 left-side view) in Drawings/GE Section
- Added 11 redrawn AC4400CW drawings (BNSF and CEFX Phase 2a versions, UP versions) in Drawings/GE Section
2007-03-30
- Added 2 SD90MAC drawings (UP version) in Drawings/EMD Section
2007-03-28
- Added SD80MAC right-side view in Drawings/EMD Section
2007-03-24
- Added redrawn SD80MAC (left-side view) in Drawings/EMD Section
2007-03-18
- Revised 1 GP15-1 drawing (now UP 1645-1714 left-side view) in Drawings/EMD Section
- Added 11 GP15-1 drawings (UP versions) and 6 GP15AC drawings in Drawings/EMD Section
2007-03-17
- Added 26 GP15-1 drawings (CR and MP versions) in Drawings/EMD Section
2007-03-01
- Added CN SD40-2W #5362 in Drawings/Painted Locomotives section
- Revised CN SD40-2W #5334 in Drawings/Painted Locomotives section
2007-02-22
- Added 6 SD40-2W drawings (right-side as-built versions) in Drawings/EMD Section
- Revised SD40-2W right-side views in Drawings/EMD Section
2007-02-20
- Added CN GP40-2W's #9637 and #9656 in Drawings/Painted Locomotives section
- Revised CN GP40-2LW's #9411, #9531 and #9606 in Drawings/Painted Locomotives section
2007-02-18
- Added 6 SD40-2W drawings (left-side as-built versions) in Drawings/EMD Section
- Revised SD40-2W left-side views in Drawings/EMD Section
2007-02-16
- Added PPGX Trinity 3281 cu-ft hopper #20056 in Drawings/Painted RS Section
2007-02-13
- Added GACX NSC 3220 cu-ft hoppers #2411 and #12358 in Drawings/Painted RS Section
2007-02-12
- Added 3 Johnstown America 5400 cu-ft hopper variations in Drawings/RS Section
2007-02-10
- Major photo update (See Reporting Mark Index)
- Added NSC 3220 cu-ft hopper in Drawings/RS Section
2007-02-09
- Added Trinity 3281 cu-ft hopper in Drawings/RS Section
- Revised 2 AC4400CW drawings (UP Phase 2a version) in Drawings/GE Section
- Revised all couplers in Drawings/Parts Section
2007-02-03
- Added Drawings History section
2007-02-02
- Added details under About Me
- Added link to Railarc Photo Archive in Links Section
- Revised 4 SD70M drawings (UP Phase 1c versions) in Drawings/EMD Section
2007-01-27
- Added 85 photos (see photos section for details)
- Added 2 SD50 drawings (SBD 8596-8602) in Drawings/EMD Section
- Revised all SD50/SD60 series drawings (new wheel bearings, air intakes and walkway blower duct) in Drawings/EMD Section
2007-01-19
- Added SD45 old-vs-new comparison in Drawings/Comparison section
- Added 22 SD45 drawings (ATSF, CNW and GN Phase 2b2, RDG, NW Phase 2a1, PC, SLSF and SP Phase 2 versions) in Drawings/EMD Section
- Revised 6 SD45 drawings (now NW Phase 1a2-1b2 and PRR Phase 2a2 versions) in Drawings/EMD Section
2007-01-18
- Added SP SD45 #8824 in Drawings/Painted Locomotives section Revised all recently added SD45 drawings (handrail stanchion spacing)
2007-01-15
- Added GN SD45 #400 in Drawings/Painted Locomotives section
2007-01-14
- Added 12 SD45 drawings (GN Phase 1b2, PRR and SP versions) in Drawings/EMD Section
- Revised 2 SD45 drawings (now CNW version) in Drawings/EMD Section
2007-01-12
- Added 2 SD45 drawings (GN as-modified) in Drawings/EMD Section
- Revised 4 SD45 drawings (now EMDX and ATSF Phase 1b1 versions) in Drawings/EMD Section
2007-01-11
- Added 4 SD45 drawings (ACL and GN versions) and 7 GP40-2LW drawings (KCS versions) in Drawings/EMD Section
2007-01-09
- Added 2 SD45 drawings (ATSF version) in Drawings/EMD Section
- Revised 2 SD40 drawings (PRR version) in Drawings/EMD Section
2007-01-06
- Added 4 GP40-2LW and 2 GP40-2W drawings (MEC versions) in Drawings/EMD Section
- Added MEC (Pan Am) GP40-2LW #505 and GP40-2W #511 in Drawings/Painted Locomotives section
2007-01-05
- Added 14 GP40-2LW and GP40-2W drawings (GOT and HCRY versions) in Drawings/EMD Section
- Added HCRY GP40-2LW #3011 and GP40-2W #3013 in Drawings/Painted Locomotives section
- Revised undecorated GP40-2W drawings (CN and GOT versions) in Drawings/EMD Section
2007-01-04
- Revised undecorated GP40-2LW drawings (formerly listed as GP40-2W's) in Drawings/EMD Section
- Added 1 recording (SLR RM-1 #804 leading) in Recordings section
2007-01-03
- Added 14 SD40-2 drawings (ATSF and KCS as-modified versions) in Drawings/EMD Section
- Revised existing ATSF, B&O, IC, KCS and UP SD40-2 drawings in Drawings/EMD Section
- Added BN SD40-2 #8011, IC SD40-2 #6030 and UP SD40-2's #3311 and #3699 in Drawings/Painted Locomotives section
Past Updates - 2006
2006-12-18
- Added NS SD50 #6519 and UP SD60 #6005 in Drawings/Painted Locomotives section
- Added 7 SD40-2 drawings (BN versions) in Drawings/EMD Section
- Revised existing BN and CNW SD40-2 drawings in Drawings/EMD Section
2006-12-14
- Added 16 GP40M-3 drawings (TM versions) in Drawings/EMD Section
- Added 15 U33C drawings (SP versions) in Drawings/GE Section
- Revised 3 U33C drawings (now various SP versions) in Drawings/GE Section
- Added SP SD50's #5510 and #5517 in Drawings/Painted Locomotives section
2006-12-13
- Added SBD B36-7 #5847 in Drawings/Painted Locomotives section
- Added 8 SD60 drawings (early EMDX, KCS and NS versions) in Drawings/EMD Section
- Added 2 U33C drawings (now BN and D&H right-side views) in Drawings/GE Section
- Revised 2 U33C drawings (now BN and D&H left-side views) in Drawings/GE Section
2006-12-12
- Added 6 SD60 drawings (EMDX and SOO versions) in Drawings/EMD Section
2006-12-11
- Added SOO SD60M #6060 in Drawings/Painted Locomotives section
- Added 4 SD60 drawings (CR and CSX versions) and 9 SD60M drawings (BN, CR, SOO and UP versions) in Drawings/EMD Section
- Revised 8 SD60M drawings (now CR and UP versions) and 2 SD60I drawings in Drawings/EMD Section
2006-12-10
- Revised all new SD50/SD60 drawings (corrected hood proportions)
- Revised 2 SD60 drawings (now UP version) in Drawings/EMD Section
2006-12-09
- Added 2 SD60 drawings (C&NW version) in Drawings/EMD Section
- Added 2 B36-7 drawings (SBD version with Adirondack trucks) in Drawings/GE Section
- Added MP SD50's #5000 and #5002, SBD B36-7 #5900 and SD50's #8500 and #8615 in Drawings/Painted Locomotives section
2006-12-08
- Added 8 SD50 drawings (C&NW, MP, KCS and CR versions) in Drawings/EMD Section
- Revised 2 SD50 drawings (now CNW version) in Drawings/EMD Section
- Revised most existing SD50 drawings (minor details) in Drawings/EMD Section
2006-12-07
- Added 15 SD50 drawings (B&O, C&O, D&RGW, NS, SBD and UP versions) in Drawings/EMD Section
2006-12-05
- Added SD50 drawing (D&RGW left-side view) in Drawings/EMD Section
2006-11-17
- Added 2 recordings from early 2006 (SLR GP40's 3004 and 3206 leading) in Recordings section
2006-10-29
- Re-transferred 27 recordings in Recordings section
2006-10-27
- Added 2 SD38-2 drawings (CNW version) in Drawings/EMD Section
- Added 7 U28B drawings (GN, MILW, NW and RI versions) and 4 U30B drawings (ACL and SAL versions) in Drawings/GE Section
- Revised 1 U28B drawing (now GN left-side view) in Drawings/GE Section
2006-10-22 to 26
- Worked on updating and revamping Photos/Reporting Marks section (updated lists and added new photos)
2006-10-19
- Added CB&Q U28B #107 in Drawings/Painted Locomotives section
2006-10-18
- Added 1 U30B drawing (NYC right-side view), 4 U28B drawings, 1 U33B drawing (SCL Phase 2a right-side view) and 7 U36B drawings (SCL and AT versions) in Drawings/GE Section
- Revised 1 U30B drawing (now NYC left-side view) 1 U33B drawing (now SCL Phase 2a left-side view) and 1 U36B drawing (now SCL Phase 2e left-side view) in Drawings/GE Section
- Added SLR PS 50' 5077 cu-ft boxcar #1062 in Drawings/Painted RS Section
2006-10-17
- Added 7 PS 50' boxcars (5219 and early 5277 cu-ft versions) in Drawings/RS Section
- Revised 3 PS 50' boxcars (now 5219 cu-ft versions) in Drawings/RS Section
2006-10-14
- Added 10 U30B drawings (IC, NW, LN and WP Phase 1b and 1c versions, NW Phase 2f version) 1 U36B drawing (CR Phase 3c1 right-side view) and 2 U33B drawings (SCL Phase 2c versions) in Drawings/GE Section
- Revised U36B drawing (now CR Phase 3c1 left-side view) in Drawings/GE Section
2006-10-13
- Added 4 U30B drawings (WP Phase 2d-2e versions) and 9 U33B drawings (PC and RI versions) in Drawings/GE Section
- Revised U33B drawing (now RI Phase 2b left-side view) in Drawings/GE Section
2006-10-12
- Added 8 U30B drawings (C&O Phase 3c2, CB&Q, NW and WP versions) in Drawings/GE Section
2006-10-09
- Added 4 new PS 50' boxcars in Drawings/RS Section
- Revised 2 PS 50' boxcars in Drawings/RS Section
2006-10-07
- Added/Re-transferred 14 recordings in Recordings section
- Today I started tracking down html files that I had not yet uploaded onto the "new" (as of December 2005) server, and which were no longer on my old server or on the hard drive. Thanks to http://web.archive.org , I've been able to download fairly recent versions of those pages (which include pages about the history of the drawings and details on how I make the drawings) and I will eventually have them uploaded again--once they're brought up-to-date. However, I also started having some fun by typing in addresses from the old server (0catch.com)... Ever wonder what this site looked like five years ago? 2001 was only one year after I initially created this site and the year I started with 0catch as a server. I've uploaded the drawings page from late 2001 and plan on uploading other pages from years ago.
2006-10-02
- Added PS 50' 5277 and 5344 cu-ft boxcars in Drawings/RS Section
2006-09-26
- Added NSC 50' 5092 and 5101 cu-ft boxcars (BCIT/BCOL versions) in Drawings/RS Section
2006-09-24
- Revised NSC 50' 5092 cu-ft boxcars (CN 400350-400599 and later versions) in Drawings/RS Section (longer truck centers)
- Added NSC 50' 5092 cu-ft boxcar (CN 411000-411899) in Drawings/RS Section
2006-09-23
- Added NSC 50' 5092 cu-ft boxcar (10' YSD plug door) and FMC 5283 cu-ft boxcar in Drawings/RS Section
2006-09-22
- Added 6 NSC 50' 5092 cu-ft boxcars in Drawings/RS Section
2006-09-21
- Added 3 NSC 50' 5082 cu-ft boxcars in Drawings/RS Section
2006-09-16
- Added 2 FMC 50' boxcar drawings (MEC as-modified versions) in Drawings/RS Section
- Added MEC (Pan Am) FMC 50' 5347 cu-ft boxcar #32074 in Drawings/Painted RS Section
2006-09-14
- Added 3 FMC 50' boxcar drawings (5347 cushion underframe and 5077 cu-ft versions) in Drawings/RS Section
2006-09-09
- Added 2 FMC 50' boxcar drawings (5317 and 5347 cu-ft versions) in Drawings/RS Section
- Revised all existing FMC 50' boxcar drawings in Drawings/RS Section
2006-06-23
- Added 2 GP38 drawings (MP Phase 1 version) and 6 GP38-2 drawings (GP50 and GP40X rebuilds) in Drawings/EMD Section
2006-06-20
- Major update completed
- Added in Drawings/Painted Contributed Section:
- 1 new drawing and 1 revised drawing contributed by Alec Holmes (WC 7530, WC 7508 respectively)
- 1 drawing contributed by David Cenci (CN 2500)
- 1 drawing contributed by David Hancock (FXE 4000)
- 2 drawings contributed by Hank Stephens (RI 990, RI train)
- 2 drawings contributed by Joe LeMay (BNSF 9388, UP 1989)
- 2 drawings contributed by Max Koehn (MWC GP60, MWC 9141)
- 10 drawings contributed by Sean Casey (BNSF 9385, CITX SD70M-2, CSX 7573, Metrolink 882, SP 4048, UP 4049, 4050, 4051, 5229 & 8331)
- 4 drawings contributed by Zach Pumphery (AMTK 517 & 600, MP 2103, UP 8320)
- 1 revised drawing contributed by William Strannix (DOE 106)
- Added in Drawings/Undecorated Contributed Section:
- 4 drawings contributed by David Cenci (EMD F38F-2, F38H-2, SD38T-2, SD40-2M)
- 1 drawing contributed by Hank Stephens (GE P30CH)
- 1 drawing contributed by Sean Casey (EMD SD70T-2)
- Added 1 drawing contributed by Hank Stephens (Quicksilver Roadrailer) in Drawings/Painted Contributed RS Section
2006-06-19
- Added 2 GP38-3 drawings (NS GP50 rebuild) and 2 SD70ACe drawings (UP 8424-8523) in Drawings/EMD Section
2006-06-18
- Added GP60B right-side view in Drawings/EMD Section
- Revised GP60B right-side view in Drawings/EMD Section
2006-06-15
- Revised ATSF GP60M's #101 and #146 in Drawings/Painted Locomotives section
2006-06-14
- Added 2 revised GP60M drawings in Drawings/EMD Section
2006-06-12
- Revised EMDX GP60 #7 in Drawings/Painted Locomotives section
2006-06-10
- Added GP60 demonstrator and 5 SD70MAC drawings (all right-side views) in Drawings/EMD Section
- Revised all existing SD70MAC drawings (minor details) in Drawings/EMD Section
- Added revised GP60 demonstrator left-side view in Drawings/EMD Section
2006-06-09
- Added 8 GP59 drawings (EMDX, ex-EMDX versions) in Drawings/EMD Section
2006-06-08
- Added GP59 right-side view in Drawings/EMD Section
- Added revised GP59 left-side view in Drawings/EMD Section
2006-06-06
- Added 2 ES44DC drawings (CSX version) in Drawings/GE Section
- Added 2 SD70ACe drawings (FXE version) in Drawings/EMD Section
2006-06-05
- Added 2 revised C40-9 drawings in Drawings/GE Section
- Added 1 GP60 drawing (SSW Phase 2a left-side view) in Drawings/EMD Section
- Revised all Phase 2b and 2c GP60 drawings (low-mounted stepwell lights, fewer latched hood doors) in Drawings/EMD Section
2006-06-04
- Revised CP ES44AC #8724 and UP ES44AC #5698 in Drawings/Painted Locomotives section
- Added CITX SD70M-2 #142 and CN ES44DC #2222 in Drawings/Painted Locomotives section
2006-06-03
- Added BNSF ES44DC #7687 in Drawings/Painted Locomotives section
- Added 2 new ES44DC drawings (CN version) in Drawings/GE Section
- Revised all existing ES40DC, ES44DC and ES44AC drawings (center hood proportions) in Drawings/GE Section
- Added 2 revised GP39 drawings in Drawings/EMD Section
2006-06-02
- Added 15 new GP60 drawings in Drawings/EMD Section
- Added 5 revised GP60 drawings in Drawings/EMD Section
2006-05-31
- Added 2 GP40 drawings (LLPX version), 2 GP60 drawings (ATSF Phase 1 version) and 2 SD70ACe drawings (BNSF version) in Drawings/EMD Section
2006-05-22
- Added 37 various photos in Photos/Reporting Marks section (to be added with descriptions and thumbnails in MMA photo archive)
2006-05-20
- Added SLR GP40 #3001, SLR GP40M-3 #3805 and SSW B36-7 #7770 in Drawings/Painted Locomotives section
- Revised ATSF B40-8W #561, BCR B39-8E #3905, MMA C30-7 #5078 and SLR GP40 #3207in Drawings/Painted Locomotives section
2006-05-19
- Added MMA B39-8E #8569, MP B23-7 #4653 and MP SD40-2 #3186 in Drawings/Painted Locomotives section
- Revised "Jenks Blue" colour shade on MP painted locomotives
2006-05-17
- Added MP GP40 #622 and UP SD40-2's #3798 and #4238 in Drawings/Painted Locomotives section
- Added MP logos in Drawings/Logos section
2006-05-16
- Added 2 U30C drawings (KSCX version) in Drawings/GE Section
- Added KSCX U30C #1030 in Drawings/Painted Locomotives section
2006-05-15
- Added 2 H16-44 drawings (CN version) in Drawings/FM Section
- Revised 4 H16-44 drawings (B&O versions) in Drawings/FM Section
2006-05-12
- Major update completed
- Added in Drawings/Undecorated Contributed Section:
- 2 drawings contributed by David Cenci (SD40R and SD40X)
- 5 drawings contributed by Nathan Rohdenburg (GP28, GP49, GP49PH, S6-B1 and SD38-3)
- Added in Drawings/Painted Contributed Section:
- 3 drawings contributed by David Cenci (GTW 5910, TSBY 392 & 2681)
- 5 drawings contributed by James Schultz (DM&E 4002, 6365 & 551, Northshore Mining 650, SOO 6001)
- 1 drawing contributed by Max Koehn (MWC 6620)
- 17 drawings contributed by Nathan Rohdenburg (AGR 4027 & 4028, CIND 2252, CNRY 85, CSCD 6637, GSWR 1900 & 4026, HESR 2006--2 views, IORY 4011 & 4030, MNAR 1023, NECR 3689, OTVR 192, SCXY 189, TPW 2058 & 4056)
- 3 drawings contributed by R. T. Dowling (BM 3001, IVRT 212, MEC 516)
- Added 1 drawing contributed by Hank Stephens (Wabash roadrailer) in Drawings/Undecorated Contributed RS Section
- Added 171 new and 25 revised EMD drawings (most of the GP18, GP20, GP30 and GP35 drawings currently posted, as well as ACL and WP GP40 drawings) in Drawings/EMD Section
- Added 10 new and 2 revised FM H24-66 drawings (FM, DLW and RDG versions) in Drawings/FM Section
- Added KCS GP30 #107, MP B23-7 #4660, NYC GP20 #6107, RDG GP30 #5513 and SLSF U30B #850 in Drawings/Painted Locomotives section
2006-05-08
- Major update in progress
- Added 54 various photos in Photos/Reporting Marks section (to be added with descriptions and thumbnails in MMA photo archive)
2006-05-06
- Major update in progress
- Updated Photos/Reporting Marks section (and all sub-sections)
- Added 123 various photos in Photos/Reporting Marks section (to be added with descriptions and thumbnails in MMA photo archive)
2006-05-02
- Added 5 recordings in Recordings page
Past Updates - 2005
[Data missing from February to December 2005]
February 05, 2005
- Removed (by request) 35 drawings by Chase Zickefoose from Drawings/Painted Contributed section
- All the above drawings can be found on Chase's website, at http://ak.cats.ohiou.edu/~cz143803/paintings.htm
February 03, 2005
- Created Drawings/8-driver Steam Locomotives section
- Added UP FEF-3 in Drawings/8-driver Steam Locomotives section
February 01, 2005
- Major update in completed
- Created Drawings/Undecorated Contributed European section
- Added 1 drawing contributed by Clive Mortimore in Drawings/Undecorated Contributed European section
- Created Drawings/Painted Contributed European section
- Added 1 drawing contributed by Clive Mortimore in Drawings/Painted Contributed European section
- Added 5 drawings contributed by Jason Pelton in Drawings/Painted Contributed section
- Added 2 drawings contributed by Michael Huhn in Drawings/Painted Contributed section
- Added 2 drawings contributed by Andrew Matuska in Drawings/Painted Contributed section
- Added 1 drawing contributed by Jay Tester in Drawings/Painted Contributed section
- Added 1 drawing contributed by Joe LeMay in Drawings/Painted Contributed section
- Added 2 drawings contributed by Jonathon Leese in Drawings/Painted Contributed section
- Added 2 drawings contributed by Andrew Matuska in Drawings/Undecorated Contributed section
- Added 1 drawing contributed by David Cenci in Drawings/Undecorated Contributed section
- Added 1 drawing contributed by Jay Tester in Drawings/Undecorated Contributed section
- Added 1 drawing contributed by Mark Fredricks in Drawings/Undecorated Contributed RS section
- Added 12 drawings contributed by Rick de Karske in Drawings/Painted Contributed RS section
- Removed (by request) 21 drawings contributed by Alexander Costenoble from Drawings/Painted Contributed section
- All the above drawings can be found on Alexander's website, at http://www.airlandrail.net
January 30, 2005
- Added SNCF BB 15000 variations in Drawings/SNCF section
January 17, 2005
- Added SNCF CC 72000 and BB 22200 Phase 1 in Drawings/SNCF section
January 15, 2005
- Added painted SNCF BB 67400 variations and Z-5300 in Drawings/Painted SNCF section
- Revised painted SNCF BB 22200 in Drawings/Painted SNCF section
- Added SNCF Z5300 variations in Drawings/SNCF section
January 09, 2005
- Added SNCF BB 22200 and BB 67400 variations in Drawings/SNCF section
- Added SNCF BB 22200 #522316 in Drawings/Painted SNCF section
January 08, 2005
- Added multiple BNSF Bethgon II Coalporters in Drawings/Painted Rolling Stock section
January 07, 2005
- Added Johnstown America Bethcon Coalporters and 81' "Flexibeam" in Drawings/Rolling Stock section
January 06, 2005
- Major update completed
- Revised most undecorated and painted freight car drawings (trucks)
- Added CN, IMRL, NS and TR NSC coil cars in Drawings/Painted Rolling Stock section
January 05, 2005
- Added NSC 42' coil cars in Drawings/Rolling Stock section
January 02, 2005
- Major update completed
- Added TWI 73' depressed-center centerbeam flatcar and PS 60' flatcar in Drawings/Rolling Stock section
- Added 6 drawings contributed by Alexander Costenoble in Drawings/Painted Contributed section
- Added 1 drawing contributed by Daomn Curtis in Drawings/Painted Contributed section
- Added 1 drawing contributed by Zach Pumphery in Drawings/Painted Contributed section
- Added 4 drawings contributed by Jason Pelton in Drawings/Painted Contributed section
- Added 12 drawings contributed by Rick de Karske in Drawings/Painted Contributed section
- Added 2 drawings contributed by Rick de Karske in Drawings/Painted Contributed RS section
- Added 2 drawings contributed by Jason Pelton in Drawings/Painted Contributed RS section
- Added 8 drawings contributed by Adam Chilcote in Drawings/Undecorated Contributed RS section
January 01, 2005
- Added NSC 3-unit drawbar-connected well car in Drawings/Rolling Stock section
- Added C39-8E and C40-8M right-side views in Drawings/GE Section
- Created Drawings/MK-MPI section and Drawings/RPRX section
- Added GG-20B right-side views in Drawings/RPRX section
- Revised GG-20B drawing in Drawings/RPRX section
Past Updates - 2004
December 30, 2004
- Added BCOL TWI 73' Centerbeam, CRLE Gunderson well car and SLGG PS 50' boxcar #10326 in Drawings/Painted Rolling Stock section
- Added CP Angus wide-vision caboose and PS 50' boxcar variation in Drawings/Rolling Stock section
December 29, 2004
- Added 23 photos in SLR/SLQ Photo Archive
December 28, 2004
- Purchased additional bandwidth to make site viewable again
- Rescanned a few MMA and SLR photos from 2004
December 27, 2004
- Added NSXU 53' container in Drawings/Painted Containers section
December 26, 2004
- Added NSC and Thrall articulated well cars in Drawings/Rolling Stock section
December 24, 2004
- Revised all articulated Gunderson well cars (125-ton trucks, 36" wheels between cars)
December 23, 2004
- Added USRX 50' boxcar (Evans design) in Drawings/Rolling Stock section
December 21, 2004
- Added ACFX 5000 cu-ft hopper cars #45290 and #51394 in Drawings/Painted Rolling Stock section
December 20, 2004
- Added Enterprise Ore Cars and International wide-vision caboose variations in Drawings/Rolling Stock section
December 19, 2004
- Added CP, ATW and SOO Thrall 52' 6" Gondolas in Drawings/Painted Rolling Stock section
December 18, 2004
- Added Thrall 52' 6" Gondola (5' 0" interior height) in Drawings/Rolling Stock section
- Added ATSF PS 4427 cu-ft hoppers in Drawings/Painted Rolling Stock section
- Added PRR S2 #9107, SLR M420W #3569, GP40M-3 #3804 and RM-1 #805 in Drawings/Painted Locomotives section
December 17, 2004
- Added BNSF GP60M #115 in Drawings/Painted Locomotives section
- Added FT A-B and A-B-A sets in Drawings/EMD Section
- Added RS3 variations in Drawings/ALCO-MLW-BBD Section
December 16, 2004
- Added RS2 and RS3 variations in Drawings/ALCO-MLW-BBD Section
December 15, 2004
- Added Thrall 48' all-purpose spine car in Drawings/Rolling Stock section
- Added E8A, E9A, GP60M, SD7 and SD9 right-side views in Drawings/EMD Section
- Added E8A Phase 1 and SD9 Phase 3 variations in Drawings/EMD Section
- Revised all E-unit drawings (wheel size)
December 14, 2004
- Added RS1 variations and S1, S2, S3 and S4 right-side views in Drawings/ALCO-MLW-BBD Section
- Added GP20, GP50, SD24 and SD24B right-side views in Drawings/EMD Section
- Added 3 ATSF F-units in Drawings/Painted Locomotives section
December 13, 2004
- Removed 259 drawings contributed by Peter Weiss from Drawings/Painted Contributed section
- Removed 19 drawings contributed by Peter Weiss from Drawings/Painted Contributed RS section
- Removed 1 drawing contributed by Peter Weiss from Drawings/Undecorated Contributed section
- All the above drawings can be found on Peter's website, at http://pacificbelt.0catch.com
December 12, 2004
- Major update in progress
- Added F3B variations, and GP39-2 and F3A right-side views in Drawings/EMD Section
- Removed (by request) 9 drawings by Michael Huhn in Drawings/Painted Contributed section
- Added 5 drawings contributed by Clive Mortimore in Drawings/Undecorated Contributed section
- Added 1 drawing contributed by David Cenci in Drawings/Undecorated Contributed section
- Added 1 drawing contributed by Adam Chilcote in Drawings/Painted Contributed RS section
- Added 15 drawings contributed by Alexander Costenoble in Drawings/Painted Contributed section
- Added 4 drawings contributed by Rob Smith in Drawings/Painted Contributed section
- Added 5 drawings contributed by Michael Huhn in Drawings/Painted Contributed section
- Added 1 drawing contributed by David Hancock in Drawings/Painted Contributed section
- Added 3 drawings contributed by Rick de Karske in Drawings/Painted Contributed section
- Added 4 drawings contributed by Adam Chilcote in Drawings/Painted Contributed section
December 11, 2004
- Created Drawings/BLW Section
- Added F7B variations in Drawings/EMD Section
- Added RF16 variations in Drawings/BLW Section
December 10, 2004
- Added CP H16-44 #8605 in Drawings/Painted Locomotives section
December 09, 2004
- Revised all B23S-7 drawings
- Added AOK B23S-7 #4093 in Drawings/Painted Locomotives section
December 08, 2004
- Added NHRR GP30 #2198 in Drawings/Painted Locomotives section
December 07, 2004
- Added MET F59PH #861 in Drawings/Painted Locomotives section
- Added 5 MET bi-level coaches in Drawings/Painted Rolling Stock section
December 05, 2004
- Added GO Transit F59PH #525 in Drawings/Painted Locomotives section
December 04, 2004
- Added BBD bi-level coach/cab variations in Drawings/Rolling Stock section
- Added 3 GO Transit bi-level coaches in Drawings/Painted Rolling Stock section
- Added F59PH right-side views in Drawings/EMD Section
- Revised all F59PH drawings (radiator intakes)
- Revised all GO Transit locomotives (shade of green, white stripe thickness)
December 03, 2004
- Added HS/UTDC and BBD bi-level coaches in Drawings/Rolling Stock section
December 01, 2004
- Added CSX and UP AC6000CW's in Drawings/Painted Locomotives section
- Revised all AC6000CW variations (number board location)
November 29, 2004
- Added Gunderson 53' "Husky Stack" in Drawings/Rolling Stock section
- Added 3 Genstar 40' containers in Drawings/Painted Containers section
- Revised Genstar 20' container (orange shade) in Drawings/Painted Containers section
November 28, 2004
- Added 4 AC6000CW variations in Drawings/GE Section
November 25, 2004
- Added TTGX bi-level autorack (CP rack) in Drawings/Painted Rolling Stock section
November 22, 2004
- Added BSC bi-level autorack variation in Drawings/Rolling Stock section
- Added 2 TTGX bi-level autoracks and DPCX pressure-slide hopper #303 in Drawings/Painted Rolling Stock section
November 21, 2004
- Added BSC bi-level autorack in Drawings/Rolling Stock section
November 20, 2004
- Revised CN GP40-2LW vs. human vs. Subaru drawing in Drawings/Painted Locomotives section
- Added 3 ETTX tri-level autoracks in Drawings/Painted Rolling Stock section
November 19, 2004
- Major update in progress
- Created Drawings/Painted Contributed RS section
- Added 1 drawing contributed by Geoff Littlefield in Drawings/Undecorated Contributed section
- Added 1 drawing contributed by Jason Pelton in Drawings/Painted Contributed RS section
- Added 4 drawings contributed by Chris Blaschuk in Drawings/Painted Contributed section
- Added 1 drawing contributed by Jason Pelton in Drawings/Painted Contributed section
- Added 4 drawings contributed by Geoff Littlefield in Drawings/Painted Contributed section
- Added 5 drawings contributed by David Hancock in Drawings/Painted Contributed section
- Added 2 drawings contributed by Rob Smith in Drawings/Painted Contributed section
- Added 1 drawing contributed by Roland Ruesch in Drawings/Painted Contributed section
November 15, 2004
- Added BSC tri-level autorack, GATX 2800 cu-ft pressure-flow hopper variation and PCF 57' reefers in Drawings/Rolling Stock section
November 13, 2004
- Added ETTX tri-level autorack (CN rack) in Drawings/Painted Rolling Stock section
November 12, 2004
- Added 3 tri-level autoracks in Drawings/Rolling Stock section
- Removed (by request) 5 drawings by David Hancock in Drawings/Painted Contributed section
November 10, 2004
- Added HS/NSC woodchip gondola in Drawings/Rolling Stock section
November 08, 2004
- Added ACF 5000 cu-ft hopper variation in Drawings/Rolling Stock section
- Added ACFX 5000 cu-ft hopper and SRY NSC 50' high-cube boxcar in Drawings/Painted Rolling Stock section
November 07, 2004
- Added TWI 50' high-cube boxcar and ACF 5000, 5250 and 5800 cu-ft hopper car variations in Drawings/Rolling Stock section
- Added CRLE and MMA TWI 50' high-cube boxcars and BN 60' Thrall Centerbeam in Drawings/Painted Rolling Stock section
November 06, 2004
- Added OPSU 53' container in Drawings/Painted Containers section
- Added 3 FBOX NSC 50' high-cube boxcars, UTCX 5800 cu-ft hopper and DTTX 56' well car in Drawings/Painted Rolling Stock section
November 05, 2004
- Major update in progress - See Photos section
- Added 1 drawing contributed by Jason Pelton in Drawings/Painted Contributed section
- Added 3 drawings contributed by David Hancock in Drawings/Painted Contributed section
- Added 2 drawings contributed by Rob Smith in Drawings/Painted Contributed section
- Added 1 drawing contributed by Geoff Littlefield in Drawings/Painted Contributed section
November 03, 2004
- Major update in progress
- Added ACF 4600 and 4700 cu-ft hoppers in Drawings/Rolling Stock section
- Added WC TRN 2980 cu-ft hopper in Drawings/Painted Rolling Stock section
- Added 1 drawing contributed by Rob Smith in Drawings/Undecorated Contributed section
- Added 2 drawings contributed by Rob Smith in Drawings/Painted Contributed section
- Added 1 drawing contributed by Shane MacKellar in Drawings/Painted Contributed section
- Added 3 drawings contributed by David Hancock in Drawings/Painted Contributed section
- Added 1 drawing contributed by Adam Chilcote in Drawings/Painted Contributed section
- Added 1 drawing contributed by Austin MacDougall in Drawings/Painted Contributed section
- Added 1 drawing contributed by Geoff Littlefield in Drawings/Painted Contributed section
- Added 1 drawing contributed by Jason Pelton in Drawings/Painted Contributed section
November 02, 2004
- Revised Thrall/Trinity 5150, 5250, 5800 and 6270 cu-ft hopper car variations (end sheets and ladders)
October 31, 2004
- Added Trinity 2980 and 3260 cu-ft hoppers in Drawings/Rolling Stock section
October 29, 2004
- Added HLCS SD40-2's 8142 and 8173, MPA SW9 #82 and UTAH GP35M #2008 in Drawings/Painted Locomotives section
October 27, 2004
- Added NS C40-9 #8795 in Drawings/Painted Locomotives section
- Revised C40-9 drawings (correct number of steps) in Drawings/GE Section
- Added NS and SLGG PS 50' boxcars in Drawings/Painted Rolling Stock section
October 25, 2004
- Added EMD SD70M-2 #74 in Drawings/Painted Locomotives section
- Added SD70M-2 left- and right-side views in Drawings/EMD Section
October 23, 2004
- Added CP PS 50' boxcar #215385 and SLGG PS 50' boxcar #10410 in Drawings/Painted Rolling Stock section
- Added BCR SD40-2 #766 in Drawings/Painted Locomotives section
October 22, 2004
- Added BCR B39-8E #3905 in Drawings/Painted Locomotives section
October 21, 2004
- Added early PS 50' ribside boxcars and Thrall 52' 6" Gondolas in Drawings/Rolling Stock section
October 16, 2004
- Added BSC 89' 4" "Twin-45" trailer flatcar in Drawings/Rolling Stock section
- Added DTTX NSC 53' well cars in Drawings/Painted Rolling Stock section
- Added 4 APL 45' containers in Drawings/Painted Containers section
- Revised all 20' container drawings (increased length by 2 pixels)
October 11, 2004
- Added SLR GP40 #3002 and MMA C30-7 #7078 in Drawings/Painted Locomotives section
- Added Thrall 40' well car and Gunderson 50' high-cube boxcars in Drawings/Rolling Stock section
October 08, 2004
- Major site update in progress
- Added 2 48' containers in Drawings/Containers section
- Added 8 painted containers in Drawings/Painted Containers section
- Added 4 drawings by Rick de Karske in Drawings/Undecorated Contributed section
- Added 1 drawing by Michael Huhn in Drawings/Undecorated Contributed section
- Added 1 drawing by Rob Smith in Drawings/Painted Contributed section
- Added 4 drawings by Jay Tester in Drawings/Painted Contributed section
- Added 9 drawings by Chase Zickefoose in Drawings/Painted Contributed section
- Added 1 drawing by Shane MacKellar in Drawings/Painted Contributed section
- Added 1 drawing by Jonathon Leese in Drawings/Painted Contributed section
- Added 1 drawing by Andrew Matuska in Drawings/Painted Contributed section
October 04, 2004
- Added 11 painted containers in Drawings/Painted Containers section
- Added 48' corrugated container in Drawings/Containers section
October 03, 2004
- Added Drawings/Containers section
- Added Drawings/Painted Containers section
- Added 53' Stroughton container in Drawings/Containers section
- Added 12 painted containers in Drawings/Painted Containers section
October 02, 2004
- Added Gunderson "Husky Stack 2+2", Thrall/TRN 48' well cars and various containers in Drawings/Rolling Stock section
September 29, 2004
- Added 48' and 53' containers and NSC 53' well car in Drawings/Rolling Stock section
- Added HR616 (right side view--100th ALCO drawing) in Drawings/ALCO-MLW-BBD Section
- Revised HR616 drawings (roof details)
September 28, 2004
- Added C430 drawings in Drawings/ALCO-MLW-BBD Section
September 22, 2004
- Added C855A drawings in Drawings/ALCO-MLW-BBD Section
- Added UP C855A #61 in Drawings/Painted Locomotives section
September 13, 2004
- Added SD40u drawings in Drawings/EMD Section
September 11, 2004
- Added AMTK F69PH-AC #450 in Drawings/Painted Locomotives section
- Added 11 photos from Jasper (Alberta) CN yard in Photos section
September 10, 2004
- Added SDP40F and F69PH-AC (right side view--500th EMD drawing) in Drawings/EMD Section
September 08, 2004
- Added 6 various cab units in Drawings/FM-CLC Section
September 06, 2004
- Added CP MLW H-1b Hudson in Drawings/6-driver Steam Locomotives section
September 05, 2004
- Added various Gunderson well cars in Drawings/Rolling Stock section
September 04, 2004
- Added C40-9 in Drawings/GE Section
- Added C40-9, C40-9W, C44-9W and C44-9WL right-side views in Drawings/GE Section
- Revised C44-9WL variations (single rear headlight, repositioned door latch pair)
August 31, 2004
- Added 4 GP35 Phase 2 variations in Drawings/EMD Section
August 29, 2004
- Major update in progress
- Removed 1 drawing contributed by Michael Huhn in Drawings/Painted Contributed section
- Added 8 drawings by Jonathon Leese in Drawings/Painted Contributed section
- Added 2 drawings by Andrew Matuska in Drawings/Painted Contributed section
- Added 4 drawings by Rob Smith in Drawings/Painted Contributed section
- Added 3 drawings by Rick de Karske in Drawings/Painted Contributed section
- Added 2 drawings by Rick de Karske in Drawings/Undecorated Contributed section
- Added 3 drawings by Rick de Karske in Drawings/Undecorated Contributed RS section
- Added 1 drawing by David Cenci in Drawings/Undecorated Contributed section
August 25, 2004
- Major update in progress
- Added 26 photos from Vernon, BC, in Photos section
August 22, 2004
- Major update in progress
- Added 24 photos from Fort St. John (BC) BCR yard in Photos section
August 03, 2004
- Added AGPX Thrall 5250 cu-ft hopper car #98072 in Drawings/Painted Rolling Stock section
August 01, 2004
- Added BRIX Thrall 5150 cu-ft hopper car #97005 in Drawings/Painted Rolling Stock section
- Revised all ACF 4460 and 4650 cu-ft hopper cars (added stirrup steps and jacking pads)
July 31, 2004
- Added ACFX ACF 4650 cu-ft hopper car #48703 in Drawings/Painted Rolling Stock section
- Added ACF 4460 and 4650 cu-ft hopper car variations in Drawings/Rolling Stock section
July 30, 2004
- Added Thrall 5150- and 5250 cu-ft hopper car variations in Drawings/Rolling Stock section
- Added Tuning up HO Athearn Locomotives in Info section
July 28, 2004
- Revised all Pullman-Standard 4427 cu-ft hopper car variations in Drawings/Rolling Stock section (ladders)
July 27, 2004
- Added Trinity 4750 cu-ft and Pullman-Standard 4427 cu-ft hopper car variations in Drawings/Rolling Stock section
- Revised all Pullman-Standard 4740 and 4750 cu-ft hopper car drawings (outlet size)
July 25, 2004
- Added Pullman-Standard 54' 4740 cu-ft hopper car in Drawings/Rolling Stock section
- Revised all Pullman-Standard 55' 4750 cu-ft hopper car drawings (roofwalk)
July 24, 2004
- Added Thrall and Trinity 5800 and 6270 cu-ft hopper cars in Drawings/Rolling Stock section
July 22, 2004
- Added GATX Pressure-slide hopper in Drawings/Rolling Stock section
July 21, 2004
- Added 2 drawings contributed by Michael Huhn in Drawings/Painted Contributed section
- Added 1 drawing contributed by Michael Ostertag in Drawings/Painted Contributed section
July 20, 2004
- Added 16 photos from July 09, 2004 in Photos/Quebec St. Yard section
July 19, 2004
- Added GP40X (SP version) in Drawings/EMD Section
- Added 2 GP40X right-side views in Drawings/EMD Section
- Revised all GP40X drawings (radiator flare, steps, pilots and handrails)
July 18, 2004
- Added GP9RM variation in Drawings/EMD Section
- Added 6 GP9, 3 GP9RM and 9 SD40 right-side views in Drawings/EMD Section
- Revised all GP9RM variations (2 additional hood louvers)
- Revised all first-generation GP units with dynamic brakes (reshaped dynamic brake housing)
July 14, 2004
- Major site update in progress
- Removed 30 redundant/poor-quality photos from SLR Photo Archive
- Added 7 new photos in SLR Photo Archive
- Revamped and simplified Photos section
- Added PROX section in Photos/Reporting Mark List section
June 30, 2004
- Added CSX GP39s 4280 and 4297 in Drawings/Painted Locomotives section
June 29, 2004
- Simplified Drawing Tidbits page and Photos Section
- Added CFA16-4 variations and CFA20-4 in Drawings/FM-CLC Section
- Added 1 drawing contributed by David Cenci in Drawings/Painted Contributed section
- Added 1 drawing contributed by Zach Pumphery in Drawings/Painted Contributed section
- Added 5 drawings contributed by Mike Hensch in Drawings/Painted Contributed section
June 26, 2004
- Added 2 CLC H16-44 and 4 FM H16-44 right-side views in Drawings/FM-CLC Section
- Added CLC H16-44 variation in Drawings/FM-CLC Section
June 25, 2004
- Added CLC H16-44 in Drawings/FM-CLC Section
June 23, 2004
- Created Drawings/FM-CLC Section
- Added 4 H16-44 Phase 3b variations in Drawings/FM-CLC Section
June 18, 2004
- Added 1 drawing contributed by Bryn Zellner in Drawings/Undecorated Contributed section
- Revised 5 drawings contributed by Clive Mortimore in Drawings/Undecorated Contributed section
- Added 3 drawings contributed by Rick De Karske in Drawings/Painted Contributed section
- Added 3 drawings contributed by Michael Huhn in Drawings/Painted Contributed section
- Added 1 drawing contributed by Mike Hensch in Drawings/Painted Contributed section
June 17, 2004
- Major site update completed
- Added 32 new photos of Montreal-Delson steam excursion in Photos section
- Added 3 new photos in SLR Photo Archive
- Created roster pages for new photos
June 15, 2004
- Revised RPRX GG-20B #2001 in Drawings/Painted Locomotives section
- Renamed all "Green Goat" variations to GG-20B
June 14, 2004
- Revised all painted GP30 variations in Drawings/Painted Locomotives section
- Revised undecorated C30-7 and C36-7 variations in Drawings/GE Section
- Added C30-7 Phase 2 right-side view in Drawings/GE Section
- Added NHRR C30-7 #7087 in Drawings/Painted Locomotives section
June 13, 2004
- Added C30-7 Phase 1 right-side view in Drawings/GE Section
- Added 4 GP30 right-side views in Drawings/EMD Section
June 11, 2004
- Major site update in progress
- Revamped Drawings section
- Enlarged backgrounds to prevent tiling on larger screen resolutions
- Added 8 drawings contributed by Aubrey Cartman in Drawings/Painted Contributed section
- Added 1 drawing contributed by Zach Pumphery in Drawings/Painted Contributed section
- Added 1 drawing contributed by David Cenci in Drawings/Painted Contributed section
- Added 5 drawings contributed by Michael Huhn in Drawings/Painted Contributed section
- Revised 1 drawing contributed by Michael Huhn in Drawings/Painted Contributed section
June 08, 2004
- Removed 3 GP30 drawings (generic) from Drawings/EMD Section
- Added 5 GP30 drawings (phase-specific and revised) in Drawings/EMD Section
- Added Chessie (C&O) GP39 #3908 in Drawings/Painted Locomotives section
June 04, 2004
- Added GP39 and SD40-2/SD40T-2 "snoot" variations in Drawings/EMD Section
- Revised existing SD40T-2 "snoot" variations in Drawings/EMD Section
June 03, 2004
- Added NW GP38 #4140 in Drawings/Painted Locomotives section
- Revised all Phase 2 GP38, GP40, SD40 and SD45 left-side drawings (added electrical cabinet)
- Revised all Phase 2c GP38 and GP40 drawings (handrail stanchion spacing)
- Added SD9 Phase 4 variations in Drawings/EMD Section
- Revised all SD7, SD9 and SD24 drawings (frame height and proportions)
June 02, 2004
- Updated Drawing Requests page to include requests filled in by contributors
- Removed 5 SD45, 4 SD40 and 7 GP38 drawings (generic) from Drawings/EMD Section
- Added 16 SD45, 6 SD40 and 22 GP38 drawings (phase-specific) in Drawings/EMD Section
- Revised GP40 Phase 2c variations in Drawings/EMD Section
- Removed 6 redundant/unexeptional recordings
June 01, 2004
- Added 7 drawings contributed by Clive Mortimore in Drawings/Painted Contributed section
- Added 1 drawing contributed by Damon Curtis in Drawings/Painted Contributed section
- Added 1 drawing contributed by David Cenci in Drawings/Painted Contributed section
- Added 1 drawing contributed by Rick De Karske in Drawings/Painted Contributed section
- Added 1 drawing contributed by Jason Pelton in Drawings/Painted Contributed section
May 29, 2004
- Added 14 new photos in SLR Photo Archive
- Removed 6 redundant 2004 photos from SLR Photo Archive
May 28, 2004
- Added RI SD40-2 #4793 in Drawings/Painted Locomotives section
May 27, 2004
- Added LLPX SD40-2 #4405 and NS SD40-2 #3210 in Drawings/Painted Locomotives section
- Added SD40-2 Phase 1 (high short hood) variations in Drawings/EMD Section
- Added 2 drawings contributed by Michael Huhn in Drawings/Painted Contributed section
- Added 13 drawings contributed by Austin MacDougall in Drawings/Painted Contributed section
- Added 18 drawings contributed by Chase Zickefoose in Drawings/Painted Contributed section
- Revised 8 drawings contributed by Chase Zickefoose in Drawings/Painted Contributed section
May 26, 2004
- Added GATX SD40-2 #7361, CNW SD40-2 #6910 and BNSF SD40-2 #8001 in Drawings/Painted Locomotives section
May 25, 2004
- Added BNSF ES44AC #5731 and CSX SD40-2 #2438 in Drawings/Painted Locomotives section
May 24, 2004
- Added SLR Locomotive Roster
- Added recording of SLR GP40M-3 #3805 in Recordings/SLR GP40M-3/RM-1 slug sets section
- Added 3 drawings contributed by Michael Huhn in Drawings/Painted Contributed section
- Added ATSF CF7 #2425 in Drawings/Painted Locomotives section
May 22, 2004
- Added BNSF GP7 #1313 in Drawings/Painted Locomotives section
- Revised GP7 (ATSF version) variations in Drawings/EMD Section
- Added 1 drawing contributed by Zach Pumphery in Drawings/Painted Contributed section
- Added 1 drawing contributed by Michael Huhn in Drawings/Painted Contributed section
- Added embedded sample sound in Recordings Page
May 20, 2004
- Added NS ES40DC #9913 and CSX SD70ACe #4831 in Drawings/Painted Locomotives section
- Revised ES44AC right-side views and ES40DC drawings in Drawings/GE Section
May 18, 2004
- Added ES40DC and ES44AC right-side views in Drawings/GE Section
- Added details to all AC4400CW and Dash-9 variations
- Added 2 drawings contributed by Mark Fredricks in Drawings/Undecorated Contributed section
May 17, 2004
- Added 16 drawings contributed by Clive Mortimore in Drawings/Undecorated Contributed section
- Added 1 drawing contributed by Nicholas Todd in Drawings/Painted Contributed section
- Added ES40DC in Drawings/GE Section
May 16, 2004
- Added GP7 (ATSF rebuild) and SD70ACe right-side views in Drawings/EMD Section
- Corrected nomenclature of GEVO unit drawings
May 14, 2004
- Added 2 recordings of GP40M-3 3804 and 1 recording of GP40M-3 3805 in Recordings/SLR GP40M-3/RM-1 slug sets section
May 13, 2004
- Added UP SD70M #2002 (right-side view) in Drawings/Painted Locomotives section
May 11, 2004
- Added GP7 (ATSF rebuild) and SD70MAC-I Phase 2 in Drawings/EMD Section
- Added SLR GP40M-3 #3803, BNSF SW1000B #3635 and UP SD70M #2001 (right-side view) in Drawings/Painted Locomotives section
May 08, 2004
- Added SW1500 right-side views and SW1000B in Drawings/EMD Section
May 07, 2004
- Major site update in progress
- Added 26 new photos in SLR Photo Archive
- Added 6 new photos in MMA Photo Archive
- Created roster pages for all new photos
May 05, 2004
- Added BN SW1 #97 in Drawings/Painted Locomotives section
- Added NW2 and SW1200RS right-side view in Drawings/EMD Section
May 02, 2004
- Added 9 SW-unit right-side views in Drawings/EMD Section
May 01, 2004
- Added 20' and 40' corrugated containers in Drawings/Rolling Stock section
April 30, 2004
- Added Evans 50' boxcar and NSC 62' high-cube boxcar in Drawings/Rolling Stock section
- Added UP NSC 73' Centerbeam #274459 in Drawings/Painted Rolling Stock section
April 29, 2004
- Added NSC 73' Centerbeam and USRX 50' boxcar variations in Drawings/Rolling Stock section
- Revised all ACF boxcar drawing variations
- Added CN NSC 73' Centerbeam #625706 in Drawings/Painted Rolling Stock section
April 28, 2004
- Major site update completed
- Added 1 drawing contributed by Austin MacDougall in Drawings/Undecorated Contributed section
- Added 3 drawings contributed by Austin MacDougall in Drawings/Painted Contributed section
- Added 3 drawings contributed by Jason Pelton in Drawings/Painted Contributed section
- Added 33 drawings contributed by Peter Weiss in Drawings/Painted Contributed section
- Revised 6 drawings contributed by Peter Weiss in Drawings/Painted Contributed section
April 27, 2004
- Major site update in progress
- Revamped entire photo section
- Removed 53 redundant/poor-quality photos
- Rescanned various photos
- Added 160 new sections of photos classified by railroad/reporting mark
- Added 11 new photos in SLR Photo Archive
- Added 12 new photos in MMA Photo Archive
April 09, 2004
- Added CP RS18u #1800 in Drawings/Painted Locomotives section
- Revised RS18u variations (numerous details) in Drawings/ALCO-MLW-BBD Section
April 08, 2004
- Added RS18u, RS18u right-side view and RS27 right-side views in Drawings/ALCO-MLW-BBD Section
April 07, 2004
- Added recording of GP40M-3 #3803 in Recordings/SLR GP40M-3/RM-1 slug sets section
April 06, 2004
- Added SD70M and SD70I rooftop views in Drawings/EMD Section
- Added GP40X and GP40M-3 right-side views in Drawings/EMD Section
- Added RS18 right-side view and RS27 variations in Drawings/ALCO-MLW-BBD Section
April 03, 2004
- Added CP H-1e 4-6-4 #2860 in Drawings/Painted Locomotives section
April 01, 2004
- Added SD40-2W right-side views in Drawings/EMD Section
- Added MLW CP H-1e class 4-6-4 (Royal Hudson--as reconditioned) in Drawings/6-driver Steam Section
March 31, 2004
- Uploaded MLW CP H-1e class 4-6-4 (Royal Hudson), 1000th drawing, in Drawings/6-driver Steam Section
March 25, 2004
- Added 1 drawing contributed by Michael Ostertag in Drawings/Undecorated Contributed section
- Added 1 photo contributed by Michael Ostertag in Photos/Contributed section
March 22, 2004
- Major update in completed
- Added 2 recordings in Recordings/SLR GP40M-3/RM-1 slug sets section
- Added 20 drawings contributed by Peter Weiss in Drawings/Painted Contributed section
- Added 12 drawings contributed by Austin MacDougall in Drawings/Painted Contributed section
- Added 7 drawings contributed by Austin MacDougall in Drawings/Undecorated Contributed section
- Revised 1 drawing contributed by Peter Weiss in Drawings/Painted Contributed section
- Revised 2 drawings contributed by Austin MacDougall in Drawings/Undecorated Contributed section
- Revised 1 drawing contributed by Austin MacDougall in Drawings/Painted Contributed section
March 12, 2004
- Fixed plan for 1000th drawing...
- Added FXE AC4400CW #4506 (999th drawing) in Drawings/Painted Locomotives section
March 06, 2004
- Major update completed
- Updated site map
- Added GP7 ("torpedo tube") and GP40M-3 (GNWR slug mother) variations in Drawings/EMD Section
- Added SLR GP40M-3 #3806, SLR RM-1 #804 and FNM M630W #723 in Drawings/Painted Locomotives section
- Revised all late Dash-8, Dash-9 and AC GE drawings (radiator size and proportions)
- Split contributed drawings page into two sections
- Added 3 drawings contributed by Austin MacDougall in Drawings/Undecorated Contributed section
- Added 1 drawing contributed by Austin MacDougall in Drawings/Painted Contributed section
- Added 2 drawings contributed by Micael Ostertag in Drawings/Painted Contributed section
February 18, 2004
- Added RM-1 slugs in Drawings/EMD Section
- Added 3 drawings contributed by Andrew Morris in Drawings/Contributed section
- Added 6 drawings contributed by Clive Mortimore in Drawings/Contributed section
- Added 10 drawings contributed by Peter Weiss in Drawings/Contributed section
February 11, 2004
- Added 2 drawings contributed by Michael Ostertag in Drawings/Contributed section
- Added 1 recording in Recordings/SLR GP40M-3/RM-1 slug sets section
- Added 2 recordings in Recordings/MMA Locomotives section
February 10, 2004
- Added 14 drawings contributed by Clive Mortimore in Drawings/Contributed section
- Added 12 drawings contributed by Peter Weiss in Drawings/Contributed section
- Revised 3 Drawings contributed by Peter Weiss in Drawings/Contributed section
February 08, 2004
- Added AC4400CW GEVO variations in Drawings/GE Section
February 07, 2004
- Added CV RS11 #3609 in Drawings/Painted Locomotives section
February 06, 2004
- Added 2 recordings in Recordings section
February 04, 2004
- Added SOO SD60 #6053 in Drawings/Painted Locomotives section
February 03, 2004
- Added 18 drawings contributed by Peter Weiss in Drawings/Contributed section
- Renumbered 1 drawing contributed by Peter Weiss in Drawings/Contributed section
February 01, 2004
- Added DWP RS11 #3601 and CN GP7 #4818 in Drawings/Painted Locomotives section
January 31, 2004
- Added 1 drawing contributed by Austin MacDougall in Drawings/Contributed section
- Added CV RS11 #3610, DWP RS11 #3608 and HRRC GP35 #3603 in Drawings/Painted Locomotives section
- Added RS11 (DWP version) variations in Drawings/ALCO-MLW-BBD Section
- Added FPA2 and FPA4 right-side views in Drawings/ALCO-MLW-BBD Section
January 30, 2004
- Added 5 RS10 and 4 RS11 right-side view variations in Drawings/ALCO-MLW-BBD Section
- Added 2004 section in SLR Photo Archive
- Added 1 photo in 2004 section in SLR Photo Archive
- Revised all RS10 and RS11 drawings (added rear drop step)
January 29, 2004
- Revised all RS10, RS11 and RS18 variations (narrowed radiator intake)
- Added DWP RS11 #3603 in Drawings/Painted Locomotives section
January 28, 2004
- Added RS10 (CN version) variations and RS11 (DWP/CV version) in Drawings/ALCO-MLW-BBD Section
- Added 8 drawings contributed by Clive Mortimore in Drawings/Contributed section
- Added 2 drawings contributed by Austin MacDougall in Drawings/Contributed section
January 19, 2004
- Added 10 drawings contributed by Peter Weiss in Drawings/Contributed section
- Revised/renamed 6 drawings contributed by Peter Weiss in Drawings/Contributed section
January 13, 2004
- Added GP40-3 (GP40X rebuild, GNWR slug set mother) in Drawings/EMD Section
January 11, 2004
- Added SLR GP40 #3004 in Drawings/Painted Locomotives section
January 10, 2004
- Added fans and couplers in section of drawing parts in Drawings Section
January 09, 2004
- Added trucks in section of drawing parts in Drawings Section
January 07, 2004
- Major update completed
- Revised all Leslie horns in drawings
- Revised most EMD drawings (see Drawings Section for more information)
- Added section of drawing parts
January 05, 2004
- Added SP DDB35 #9500 in Drawings/Painted Locomotives section
- Added C40-8W and C44-9W ("gullwing" cab) variations in Drawings/GE Section
- Added 17 drawings contributed by Peter Weiss in Drawings/Contributed section
- Revised 9 Drawings contributed by Peter Weiss in Drawings/Contributed section
- Revised B40-8W (addition of "gullwing" cab) in Drawings/GE Section
- Revised various ATSF Dash-8 and Dash-9 drawings (addition of "gullwing" cab) in Drawings/Painted Locomotives section
- Revised all C44-9WL (Canadian cab) drawing variations (removal of frame-mounted bell)
January 03, 2004
- Added AC4400CW right-side views in Drawings/GE Section
- Added UP C44AC-CTE (AC4400CW-CTE) #5952 in Drawings/Painted Locomotives section
January 02, 2004
- Major Update Completed
- Added AC4400CW variations in Drawings/GE Section (listed as 2003 drawings)
- Added AC4400CW (Phase 1, Hi-Ad trucks) right-side view in Drawings/GE Section (listed as 2003 drawing)
- Added AC4400CW right-side views in Drawings/GE Section
- Removed C44AC-CTE (replaced by AC4400CW Phase 2) in Drawings/GE Section
- Revised all late GE Dash-8 series, Dash-9 series and AC series drawings
Past Updates - 2003
December 31, 2003
- Added 4 photos from SLR line in SLR Photo Archive
December 22, 2003
- Added UP SD70M #4845 Drawings/Painted Locomotives section
- Added 7 Drawings contributed by Peter Weiss in Drawings/Contributed section
- Revised 1 drawing contributed by Peter Weiss in Drawings/Contributed section
December 21, 2003
- Added RS18M in Drawings/ALCO-MLW-BBD Section
- Revised all ALCO RS11 and MLW RS23, RS10 and RS18 drawings
- Added 4 drawings contributed by Austin MacDougall in Drawings/Contributed section
December 19, 2003
- Added SDP40 (BN version) in Drawings/EMD Section
- Added 5 drawings contributed by Austin MacDougall in Drawings/Contributed section
December 18, 2003
- Added TRN 50' high-cube boxcar in Drawings/Rolling Stock Section
- Added SD40T-2 right-side views in Drawings/EMD Section
- Added M420W right-side view in Drawings/ALCO-MLW-BBD Section
- Added 5 drawings contributed by Austin MacDougall in Drawings/Contributed section
- Added 3 drawings contributed by Mark MacDougall in Drawings/Contributed section
- Revised 1 drawings contributed by Mark MacDougall in Drawings/Contributed section
- Revised all SD40T-2 and SD45T-2 drawings (fan size)
December 17, 2003
- Added 1 drawing contributed by Clive Mortimore in Drawings/Contributed section
- Added 12 drawings contributed by Peter Weiss in Drawings/Contributed section
- Added 17 drawings contributed by Austin MacDougall in Drawings/Contributed section
- Added 3 drawings contributed by Mark MacDougall in Drawings/Contributed section
- Revised 6 drawings contributed by Peter Weiss in Drawings/Contributed section
December 14, 2003
- Added NSC and TRN 50' high-cube boxcars in Drawings/Rolling Stock Section
December 13, 2003
- Rescanned 10 photos from Quebec St. Yard in London, Ontario from 2003
- Added NSC 60' high-cube boxcar in Drawings/Rolling Stock Section
- Added TBOX NSC 60' high-cube boxcar #665390 in Drawings/Painted Rolling Stock Section
December 12, 2003
- Added 7 CF7 variations in Drawings/EMD Section
December 09, 2003
- Added 1 drawing contributed by Mark MacDougall in Drawings/Contributed section
- Added 14 drawings contributed by Austin MacDougall in Drawings/Contributed section
December 08, 2003
- Added EMD SD70ACe #72 in Drawings/Painted Locomotives section
December 07, 2003
- Added SD70ACe and SD40-2 back-to-back pairs in Drawings/EMD Section
- Revised SD90MAC Phase 2 in Drawings/EMD Section
- Added 2 drawings contributed by Mark MacDougall in Drawings/Contributed section
- Added 1 drawing contributed by Austin MacDougall in Drawings/Contributed section
- Added 8 drawings contributed by Peter Weiss in Drawings/Contributed section
- Added 17 drawings contributed by Clive Mortimore in Drawings/Contributed section
December 06, 2003
- Added Amtrak photo contributed by Leo Persick in /Contributed section
- Added 5 drawings contributed by Austin MacDougall in Drawings/Contributed section
December 05, 2003
- Added BQ23-7 in Drawings/GE Section
December 04, 2003
- Added 8 drawings contributed by Clive Mortimore in Drawings/Contributed section
December 03, 2003
- Added 1 drawing contributed by Jason Pelton in Drawings/Contributed section
- Added 3 drawings contributed by Clive Mortimore in Drawings/Contributed section
- Revised 1 drawing contributed by Clive Mortimore in Drawings/Contributed section
December 02, 2003
- Added 5 drawings contributed by Jason Pelton in Drawings/Contributed section
- Added 8 drawings contributed by Chase Zickfoose in Drawings/Contributed section
- Added 3 drawings contributed by Clive Mortimore in Drawings/Contributed section
November 28, 2003
- Added 6 drawings contributed by Peter Weiss in Drawings/Contributed section
- Added 23 revised drawings contributed by Peter Weiss in Drawings/Contributed section
November 25, 2003
- Added SD70M and SD70M right-side views (Phase 2 and 3) in Drawings/EMD Section
November 22, 2003
- Added SD40-2 and SD40-2 right-side view (ONR version) in Drawings/EMD Section
- Added ONR SD40-2 #1730 in Drawings/Painted Locomotives section
{Data missing for October-November 2003]
September 30, 2003
- Added right-side views of C40-8W in Drawings/GE Section
August 19, 2003
- Major site update in progress
- Continued photo scanning
- Added TTZX Thrall 73' Centerbeam flatcar #87322 in Drawings/Painted Rolling Stock section
- Added NSC 48' cylindrical hopper in Drawings/Rolling Stock section
- Added 4 Thrall Centerbeam Flatcar variations in Drawings/Rolling Stock section
August 18, 2003
- Photo update paused
- Added U34CH in
August 17, 2003
- Photo update paused
- Added NSC 73' Centerbeam Flatcar in Drawings/Rolling Stock section
August 15, 2003
- Major site update in progress
- Started uploading all SLR 2001 photos (rescanned) in SLR Photo Archive
- Revised all FMC boxcar drawing variations
- Added ACF and FMC boxcar variations in Drawings/Rolling Stock section
August 14, 2003
- Major site update in progress
- Started uploading all SLR 2001 photos (rescanned) in SLR Photo Archive
August 13, 2003
- Major site update in progress
- Completely revised 1999 photos section in SLR Photo Archive
- Uploaded all SLR 1999 photos (rescanned)
- Added 2 photos in 1999 photos section in SLR Photo Archive
- Thoroughly revised all sections of Train Info section
- Revised all Recordings sections
August 11, 2003
- Major site update in progress
- Created two Photos/Ontario 2003 sections
- Added 29 photos in Photos/Ontario 2003 section
August 10, 2003
- Major site update in progress
- Added Rock Island GP38-2 #4348 in Drawings/Painted Locomotives section
- Added 11 photos from SLR line in SLR Photo Archive
- Continued rescanning photos
August 05, 2003
- Photo update paused
- Added GMRC GP40 #305 in Drawings/Painted Locomotives section
- Added 4 GP35 variations in Drawings/EMD section
August 04, 2003
- Major site update in progress
- Completed missing 2003 photo descriptions in MMA photo archive
- Added CGLX NSC 33' hopper #386 in Drawings/Painted Rolling Stock section
August 03, 2003
- Major site update in progress
- Continued rescanning photos
- Added ATSF B39-8 #7401 and BN SD40-2 #6811 in Drawings/Painted Locomotives section
- Added 17 GP38-2 and 10 SD40-2 right-side view variations in Drawings/EMD section
August 01, 2003
- Major site update in progress
- Continued rescanning photos
- Created MMA photo archive
- Added 30 photos in MMA photo archive
July 31, 2003
- Major site update in progress
- Started biggest ever site update
- Started rescanning all photos with HP S20 film scanner
- Uploaded all 2003 photos (rescanned)
- Added 10 photos from SLR line in SLR Photo Archive
- Added MLW M420W right-side view in Drawings/ALCO-MLW-BBD section
[Data missing for June-July 2003]
June 23, 2003
- Added TP&W (RailAmerica) GP40X #4056 in Drawings/Painted Locomotives section
June 22, 2003
- Added Southern GP59 #4610 in Drawings/Painted Locomotives section
- Added 8 contributed drawings in Drawings/Contributed section
June 21, 2003
- Added VIA F40PH-2 #6429 (Telus) and CR C39-8 #6002 in Drawings/Painted Locomotives section
- Added TR3, TR4 and SD40-2B variations in Drawings/EMD section
June 20, 2003
- Added CMC MP1500D #101 in Drawings/Painted Locomotives section
- Added 16 contributed drawings in Drawings/Contributed section
June 19, 2003
- Added SD7 and SD9 Phase 1 variations in Drawings/EMD section
- Added 13 contributed drawings in Drawings/Contributed section
- Added 4 recordings in Recordings/SLR-GNWR GP40s section
June 17, 2003
- Added GP49, GP59 and SD35 variations in Drawings/EMD section
- Revised all GP50 and GP60 variations
June 16, 2003
- Added SW1000 in Drawings/EMD section
June 15, 2003
- Added section of drawing requests
June 13, 2003
- Added RS11 (Phase 1a) variations in Drawings/ALCO-MLW-BBD section
June 11, 2003
- Added VIA Rail Operation Lifesaver F40PH-2 #6411 in Drawings/Painted Locomotives section
- Fixed broken links in Drawings/EMD section and Drawings/GE section
June 08, 2003
- Added NSC 52' double-door boxcar, NSC 33' cylindrical hopper and MIL 48' cylindrical hopper in Drawings/Rolling Stock section
June 07, 2003
- Added TWI 50' boxcar in Drawings/Rolling Stock section
May 30, 2003
- Fixed broken links in Photos/SNCF section
May 27, 2003
- Added 28 new photos from SLR line in SLR Photo Archive
May 21, 2003
- Added B23-7, B30-7 and B36-7 (all Phase 3) variations in Drawings/GE section
- Removed inaccurate B23-7, B30-7 and B36-7 variations from Drawings/GE section
- Revised all B23S-7 and painted Phase 3 B36-7 drawings
May 19, 2003
- Added B39-8 (Phase 1) in Drawings/GE section
- Revised all B32-8, B39-8 and B40-8 narrow cab variations
May 17, 2003
- Major site update in progress
- Continued photo page updates
May 16, 2003
- Major site update in progress
- Reorganized photo sections
- Added roster photo pages without thumbnails
May 14, 2003
- Added 15 new photos from SLR line in SLR Photo Archive
May 13, 2003
- Added Providence & Worcester U18B #1801 and ATSF C40-8W #934 in Drawings/Painted Locomotives section
May 11, 2003
- Added MPEX MP2000C #6201 in Drawings/Painted Locomotives section
- Added C40-8W (Phase 2) in Drawings/GE section
- Revised all MK/MPI MK1500D/MP1500D, MP2000D, MP2000C and EMD GP15D and GP20D drawing variations
May 09, 2003
- Revised all GE U30C, U33C, U36C, C30-7, C30S-7, C36-7, C32-8, C39-8 and C40-8 (standard cab) drawing variations with scale 3" thicker frames
May 08, 2003
- Added BNSF Gunderson "Maxi-Stack III" 5-unit well car in Drawings/Painted Rolling Stock section
- Added NSC high-cube 50' boxcar variation in Drawings/Rolling Stock section
May 07, 2003
- Added ATSF F59PHI in Drawings/Contributed section
May 06, 2003
- Added New England Central GP38 #3845 in Drawings/Painted Locomotives section
- Added step-by-step info on drawing NECR GP38 #3845 in Drawings Info section
May 05, 2003
- Added 16 photos from SLR line in SLR Photo Archive
May 04, 2003
- Added Providence & Worcester GP38-2s #2006 and #2007 in Drawings/Painted Locomotives section
May 03, 2003
- Added CNA FMC 50' XP boxcar and CNIS NSC 50' XM boxcar in Drawings/Painted Rolling Stock section
- Added Maine Central U18B #407 in Drawings/Painted Locomotives section
- Added SP and PRR F59PHI in Drawings/Contributed section
April 29, 2003
- Resumed site updates after 2-week absence
- Added Guilford (Maine Central) U18B #407 in Drawings/Painted Locomotives section
[Data missing for January-April 2003]
Past Updates - 2002
[Data missing for December 2002]
November 25, 2002
- Revised all SD70, SD70M, SD70I, SD75M, SD75I and SD70MAC variations (higher frame)
November 24, 2002
- Added Kansas City Southern SD60 #747 in Drawings/Painted Locomotives section
November 22, 2002
- Added Illinois Central Gulf GP8 #7727 in Drawings/Painted Locomotives section
- Revised GP8 in Drawings/EMD section
November 21, 2002
- Added Denver & Rio Grande Western SD50 #5501 and Norfolk Southern GP38-2 #5208 in Drawings/Painted Locomotives section
- Added high-nose GP38-2 variant in Drawings/EMD section
- Revised all Norfolk Southern locomotives in Drawings/Painted Locomotives section
November 18, 2002
- Added CN SD75I snow scene drawing to homepage and Drawings/Painted Locomotives section
- Revised CN SD75I #5728 in Drawings/Painted Locomotives section
November 13, 2002
- Revised photo section of St. Thomas Railway Museum
November 11, 2002
- Added Union Pacific DDA40X #6900 in Drawings/Painted Locomotives section
November 07, 2002
- Added SD60 top view in Drawings/EMD section
November 03, 2002
- Added Railpower "Green Goat" #2001, British Columbia Railway C40-8M #4601, CIT Group/Capital Finance Inc. GP20D #2017, Canadian National GMD1 #1604 and Canadian Pacific RS23 #8038 in Drawings/Painted Locomotives section
November 01, 2002
- Added Coaster F40PHM-2C #2103 in Drawings/Painted Locomotives section
October 31, 2002
- Added Genesee & Wyoming MP15DC #45 in Drawings/Painted Locomotives section
- Revised Chicago & North western SD60 #8014 and AC4400CW #8808 in Drawings/Painted Locomotives section
October 30, 2002
- Added GP15D in Drawings/EMD section
October 28, 2002
- Added Chessie System (C&O) GP30 #3003 in Drawings/Painted Locomotives section
- Revised GATX GP40 #3702, Chessie System GP40 #3717 and SD40-2 #7602 in Drawings/Painted Locomotives section
October 27, 2002
- Added Atchison, Topeka & Santa Fe SD40-2 #5106 and Baltimore & Ohio GP40 #3696 in Drawings/Painted Locomotives section
- Revised Canadian National GP40-2LW #9581, SD40-2 #5935 and Atchison, Topeka & Santa Fe GP35 #2887 in Drawings/Painted Locomotives section
October 26, 2002
- Added Burlington Northern Santa Fe C44-9W #4642 in Drawings/Painted Locomotives section
- Added C44-9W and AC4400CW variants in Drawings/GE section
October 25, 2002
- Added Canadian Pacific M636 #4718 in Drawings/Painted Locomotives section
October 24, 2002
- Added British Columbia Railway M420W #641 in Drawings/Painted Locomotives section
October 23, 2002
- Added British Columbia Railway M420Ws #643 and #646 in Drawings/Painted Locomotives section
October 22, 2002
- Added Massachusetts Bay Transportation Authority F40PH-2C #1036 in Drawings/Painted Locomotives section
- Added 24 new photos in SLR Photo Archive
October 21, 2002
- Added Canadian National SD50F #5421, Canadian Pacific SD40-2Fs #9000 and #9020, and Via Rail LRC #6917 in Drawings/Painted Locomotives section
October 19, 2002
- Added Florida East Coast GP40-2 #419 and Guilford (Maine Central) GP40-2W #504 in Drawings/Painted Locomotives section
October 18, 2002
- Added F40PH-2C in Drawings/EMD section
October 17, 2002
- Added MLW M640 in Drawings/Alco-MLW-BBD section
- Revised all MLW C424, C630M, M630 and M636 drawings
October 16, 2002
- Added FA1 variations in Drawings/Alco-MLW-BBD section
- Revised ALCO PA1, PA2 and PA3 variations in Drawings/Alco-MLW-BBD section
October 13, 2002
- Added 12 new photos in SLR Photo Archive
- Added 3 new photos in Photos/Ontario 2002
October 10, 2002
- Added DDA40X in Drawings/EMD section (the largest and most powerful diesel ever built)
- Added information section on giant Union Pacific diesels
October 07, 2002
- Added DDA35 and DDB35 in Drawings/EMD section
- Revised Drawing Info section
October 02, 2002
- Added B&P SD45 #451 in Drawings/Painted Locomotives section
- Revised St. Lawrence & Atlantic GP40 #3207 and Acadian F40PH #293 in Drawings/Painted Locomotives section
October 01, 2002
- Added separate photo and recording sections for Acadian Railway trains
- Added several links to other sites
- Revised and renamed St. Lawrence & Atlantic GP40 #3207 (ex-GNWR GP40 #3207) in Drawings/Painted Locomotives section
September 30, 2002
- Added Burlington Northern GP35 #2532 in Drawings/Painted Locomotives section
September 29, 2002
- Added Pennsylvania SD45 #6182 in Drawings/Painted Locomotives section
- Revised Canadian Pacific beaver logo in drawings
September 28, 2002
- Added Railpower "Green Goat" in Drawings/Misc. Locomotives section
September 26, 2002
- Added PA1, PA2 and PA3 variations in Drawings/Alco-MLW-BBD section
- Added MLW S13 and RS23 variations in Drawings/Alco-MLW-BBD section
Data missing for June-September 2002]
June 16, 2002
- Added CSX GP40-2 #6409 in Drawings/Painted section
June 15, 2002
- Added Soo Line SD60 #6019 and Cotton Belt GP35s #761 and #6681 in Drawings/Painted section
June 14, 2002
- Added Chicago & North Western AC4400CW #8808 and Conrail SD40-2 #6492 in Drawings/Painted section
- Added SD40-2 (Conrail version) in Drawings/EMD section
- Revised Chicago & North Western SD60 #8014 in Drawings/Painted section
June 12, 2002
- Added Burlington Northern C30-7 #5000 in Drawings/Painted section
- Revised all U-boat and Dash-7 series drawings except U25B
June 11, 2002
- Added Atchison, Topeka & Santa Fe GP60B #325 in Drawings/Painted section
June 10, 2002
- Added Chessie System SD40-2 #7602 and Kansas City Southern SD40-2 #692 in Drawings/Painted section
June 09, 2002
- Added LLPX GP38 #2259 in Drawings/Painted section
- Revised LLPX GP38-2 #2249 in Drawings/Painted section
- Added new recordings of Acadian Railway Express in Recordings/CDAC Locomotives section
June 08, 2002
- Added SD40-2F in Drawings/EMD section
- Revised SD50F and SD60F in Drawings/EMD section
June 04, 2002
- Major site update in progress
- Added new recording of GP40 #3002 in Recordings/SLR GP40 section
- Revised several pages around the site
- Added section on locomotive and train terminology
June 03, 2002
- Added Grand Trunk Western GP38-2 #5828 in Drawings/Painted section
June 01, 2002
- Added Duluth, Missabe & Iron Range SD38 #211 in Drawings/Painted section
- Added new recording of GP40 #3204 in Recordings/SLR GP40 section
May 30, 2002
- Re-recorded several recordings for better sound quality
- Added new recording of GP40 #3202 in Recordings/SLR GP40 section
May 27, 2002
- Added Canadian Pacific AC4400CW #8523 in Drawings/Painted section
- Added AC4400CW (CP version) in Drawings/GE section
May 22, 2002
- Added new recording of GP40X #3210in Recordings/SLR GP40 section
May 21, 2002
- Added almost 20 new SLR photos
May 15, 2002
- Added CSX U18B #9505 in Drawings/Painted section
- Added new recording of GP40 #3205 in Recordings/SLR GP40 section
May 10, 2002
- Revised various descriptions around the site
May 09, 2002
- Added SD75I (ONR version) in Drawings/EMD section
- Added Ontario Northland SD75I in Drawings/Painted section
May 08, 2002
- Added F40PH-2 (Via version) in Drawings/EMD section
- Added VIA Rail F40PH-2 #6401 in Drawings/Painted section
May 03, 2002
- Added top/front/back views of EMD SD38 and SD40
May 01, 2002
- Major site update in progress
- Added Union Pacific Olympic SD70M #2002 in Drawings/Painted section
- Uploaded new sections about painted drawings
- Inserted new links to main pages in all recording and drawing sections
- Revised descriptions on all recording pages
April 28, 2002
- Major site update in progress
- Finished re-recording recordings, uploaded them
- Added older recording of M420W #3512 in Recordings/SLR M420W section
April 27, 2002
- Major update in progress
- Added Union Pacific Olympic SD70M #2001 in Drawings/Painted section
- Started re-recording recordings for better sound quality
- Added several new recordings in Recordings/SLR GP40 section
April 22, 2002
- Added Frisco SD45 #934 in Drawings/Painted section
April 20, 2002
- Added GO Transit F59PH #537 in Drawings/Painted section
- Revised GO Transit GP40-2W #700 in Drawings/Painted section
April 17, 2002
- Added EMD GP60 #7 in Drawings/Painted section
- Revised EMD GP40s #192 and 202 and LLPX GP60 #6002 in Drawings/Painted section
- Revised all GP60 variations in Drawings/EMD section
April 16, 2002
- Added LLPX GP60 #6002 in Drawings/Painted section
April 15, 2002
- Added BN SD70MAC #9411 in Drawings/Painted section
- Revised SD70MAC (BN version) in Drawings/EMD section
April 14, 2002
- Added SD70MAC and SD70MAC-I variations in Drawings/EMD section
- Added BNSF SD70MAC-I #8803 in Drawings/Painted section
April 12, 2002
- Added C420 variations in Drawings/ALCO-MLW-Bombardier section
April 11, 2002
- Added GP60B in Drawings/EMD section
- Revised all later GP60 and GP60M variations
April 09, 2002
- Added IC SD70 #1000 in Drawings/Painted section
April 08, 2002
- Added UP GP50 #970 in Drawings/Painted section
- Added GP15-1 in Drawings/EMD section
- Added U23B and U36B variations in Drawings/GE section
- Revised UP GP40 #867 in Drawings/Painted section
April 07, 2002
- Added CN HR616 #2100 in Drawings/Painted section
- Revised HR616 in Drawings/ALCO-MLW-Bombardier section
April 06, 2002
- Added HR616 in Drawings/ALCO-MLW-Bombardier section
April 05, 2002
- Added SD60F in Drawings/EMD section
April 04, 2002
- Added C40-8M in Drawings/GE section
- Added SD50F in Drawings/EMD section
April 02, 2002
- Added Guilford (B&M) GP40-2 #301 in Drawings/Painted section
April 01, 2002
- Revised all GP40X variations
- Added SLR GP40X #3210 and GP9 #60 in Drawings/Painted section
March 31, 2002
- Major update in progress
- Updated almost all recording and sound-related sections
- Uploaded two new and two older recordings
- Re-recorded several existing recordings for better quality
March 30, 2002
- Added Guilford (B&M) GP39-2 #351 in Drawings/Painted section
March 29, 2002
- Added CSX MP15T #1219 and SWP GP11 #2002 in Drawings/Painted section
- Revised all CSX and MP15T locomotives
- Revised SLR GP11 #8748, converted number to 8749, in Drawings/Painted section
March 28, 2002
- Added CN Expo 86 SD40-2W #5334 (100th painted drawing) in Drawings/Painted section
March 27, 2002
- Added CN SD40-2W #5243 in Drawings/Painted section
- Added drawings in Drawings/Contributed section
March 26, 2002
- Added ATSF C44-9W #600 in Drawings/Painted section
March 25, 2002
- Added GP39-2 variations in Drawings/EMD section
March 24, 2002
- Added CN SD40-2 #5935 in Drawings/Painted section
March 23, 2002
- Added NS GP60 #7115 in Drawings/Painted section
March 20, 2002
- Major update in progress
- Finished railroad-divided photo pages
- Added DRGW SD40T-2 #5375 in Drawings/Painted section
March 19, 2002
- Major update in progress
- Started work on new railroad-divided photo sections, with all photos taken from existing chronological pages
March 18, 2002
- Added CR GP38-2 #8058, GP40-2 #3300 and B40-8 #5068 in Drawings/Painted section
- Revised all CR locomotives in Drawings/Painted section
March 17, 2002
- Added UP SD60 #6024 in Drawings/Painted section
- Revised all UP locomotives in Drawings/Painted section
March 15, 2002
- Added CN M636 #2335 and BCR C44-9WL #4641 in Drawings/Painted section
- Added CN M636 version in Drawings/ALCO-MLW-Bombardier section
- Revised M630 and M636 variations (again) in Drawings/ALCO-MLW-Bombardier section
- Revised BCR SD40-2 #756 in Drawings/Painted section
March 14, 2002
- Added CP M630 variations in Drawings/ALCO-MLW-Bombardier section
- Revised M630, M630W and M636 variations in Drawings/ALCO-MLW-Bombardier section
March 13, 2002
- Added M630, M630W and M636 variations in Drawings/ALCO-MLW-Bombardier section
- Revised all C630M and MLW C424 variations
March 10, 2002
- Added C630M variations in Drawings/ALCO-MLW-Bombardier section
March 09, 2002
- Added CSX SD50 #8503 in Drawings/Painted section
March 07, 2002
- Added Metrolink F59PH #866 and Chessie (B&O) GP40 #3717 in Drawings/Painted section
March 06, 2002
- Added INCX GP38m-4 #2001 in Drawings/Painted section
- Added GP38m-4 (version 2) in Drawings/EMD section
- Revised MPEX GP38m-4 #2001 and CORP GP38-3 #3805 in Drawings/Painted section
March 03, 2002
- Added BCR SD40-2 #756 in Drawings/Painted section
- Added SD40-2 (BCR version) in Drawings/EMD section
March 02, 2002
- Added C628 and C630 in Drawings/ALCO-MLW-Bombardier section
- Revised MLW C424 variations
March 01, 2002
- Added GNWR GP40 #3207 in Drawings/Painted section
[Data missing for January-March 2002]
January 15, 2002
- Revised all CN and SSW locomotive drawings in Drawings/Painted section
January 14, 2002
- Added CP SD40 #5541 in Drawings/Painted section
January 13, 2002
- Revised various descriptions around the site
January 12, 2002
- Added CP C424 #4211 and CR C30-7 #6600 in Drawings/Painted section
- Revised various descriptions around the site
January 11, 2002
- Revised painted MLW M420W variations in Drawings/Painted section
January 06, 2002
- Added MLW C424 in Drawings/ALCO-MLW-Bombardier section
- Added ALCO C425 variations in Drawings/ALCO-MLW-Bombardier section
January 05, 2002
- Added ALCO C424 variations in Drawings/ALCO-MLW-Bombardier section
January 03, 2002
- Revised various descriptions around the site
January 02, 2002
- Revised all MLW M420W/BBD HR412 variations in Drawings/ALCO-MLW-Bombardier section
Past Updates - 2001
December 30, 2001
- Added ATSF GP35 #2887 in Drawings/Painted section
December 24, 2001
- Added BCVX F59PHI #905 in Drawings/Painted section
- Revised CSX GP40-2 #6086 and SD60M #8758 in Drawings/Painted section
December 23, 2001
- Added GE U30C, U33C and U36C variants in Drawings/GE section
December 22, 2001
- Added GE C30-7 variants in Drawings/GE section
December 19, 2001
- Added AMT F59PHIs #456 and #469 in Drawings/Painted section
December 18, 2001
- Revised EMD F59PHI variants in Drawings sections
- Added B&LE SD38-2 #890 in Drawings/Painted section
- Added recording in Recordings/LLPX GP38-2 section
December 17, 2001
- Added two versions of EMD F59PHI in Drawings/EMD section
- Added AMT F59PHI #2009 in Drawings/Painted section
December 13, 2001
- Added D&RGW GP40-2 #3097 and AMT F40PHs #257, #300, #358 and #393 to Drawings/Painted section
- Revised AMT B32-8WHs #513 and #517 and CDAC F40PH #450 in Drawings/Painted section
December 12, 2001
- Revised "Tunnel Motors", Locomotive engines and SLR Line history descriptions in Train Facts section
December 09, 2001
- Added several photos to Photos/SLR section/Section 6
- Revised EMD SD40T-2 in Drawings/EMD section
December 06, 2001
- Updated various recording and train facts descriptions
December 03, 2001
- Finished updating all recordings
- added recording in Recordings/SLR M420W section
December 03, 2001
- Major update in progress
- Started updating (recording using a different method) all recordings for better sound quality
[Data missing for October-December 2001]
October 26, 2001
- Revised several horn descriptions and added Nathan M3 horn variations in Information/Locomotive Air Horns section
- Revised recording descriptions for LLPX GP38-2s 2231 and 2232 (Nathan M3 instead of Leslie S3L horns)
October 25, 2001
- Revised a few horn descriptions and added Leslie SL4T in Information/Locomotive Air Horns section
October 23, 2001
- Added/revised several Recordings sections
- Added "History of Current 1:55 drawings" and "How I draw my Drawings" to Information section
October 20, 2001
- Added "Personal Favourite" icon in recordings sections
- Worked out any minor mistakes or forgotten revisions
October 17, 2001
- Finished uploading all revisions
October 15, 2001
- Major update in progress
- converted all recordings to different WAV format
- Updated various photo descriptions and information sections
September 14, 2001
- Updated various information sections
September 13, 2001
- Added two recordings in Recordings/SLR GP11 and Recordings/SLR M420W Sections
September 12, 2001
- Added CDAC F40PHs 450 and 461 in Drawings/Painted Section
September 11, 2001
- Added Recording in Recordings/LLPX GP38-2 Section
September 08, 2001
- Added GTW GP40-2 in Drawings/Painted Section
September 06, 2001
- Fixed improper links in Photos/Other North American Trains
September 05, 2001
- Added new icons in all recordings and guide sections
- Added photos to recordings sections
September 04, 2001
- Added SLR M420W #3517 and CN GP40-2LW #9524 in Drawings/Painted Section
August 31, 2001
- Finished adding new photos, revised photo descriptions in all Photos/SLR sections
- Finished Guide to Locomotive Horns section, revised Guide to Locomotive Engine Sounds section
August 30, 2001
- Added new photos to several Photos sections
[Data missing for prior dates back to 2000]