Undecorated Drawings - ALCO RS-11
| Selected scales: |
1:18 Drawings
| Model | Built | Phase | Numbers | Notes | Last modified |
|---|---|---|---|---|---|
| ALCO RS-11 ← → | 1956-08 - 1956-09 | 1a1 | DWP 3600-3614 | 2023-11-20Revision history:
2019-01-09 - Shorter cab side window - Added radiator fan clips 2019-01-11 - Replaced curved sanding line pipe at ends with hose - Revised pipes on engineer's side behind fuel tank - Added rooftop vent on conductor's side behind cab 2019-01-14 - Revised air cooling manifold piping (over intercooler intake) 2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2020-11-04 - Narrower cab side window (left side) 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing 2022-03-23 - Coupler cut lever and pilot end handrail 2023-11-20 - Added missing step behind cab (right side) | |
| ALCO RS-11 ← → | 1960-03 | 2b | LV 400-403 | 2023-12-17Revision history:
2019-08-21 - Decreased height of cab sub-base doors 2020-11-04 - Narrower cab side window 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail 2023-11-28 - Hood corner notch and side door dimensions 2023-12-17 - Corrected number of radiator shutters | |
| ALCO RS-11 ← → | 1956-06 | 1a1 | MEC 801; PTM 1082 | PTM 1082 re# MEC 802 | 2023-11-20Revision history:
2019-01-09 - Shorter cab side window - Added radiator fan clips 2019-01-11 - Replaced curved sanding line pipe at ends with hose - Revised pipes on engineer's side behind fuel tank - Added rooftop vent on conductor's side behind cab 2019-01-14 - Revised air cooling manifold piping (over intercooler intake) 2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2020-11-04 - Narrower cab side window 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing 2022-03-23 - Coupler cut lever and pilot end handrail 2023-11-20 - Added missing step behind cab (right side) |
| ALCO RS-11 ← → | 1956-03 - 1957-06 | 1a1 | NW 308-344 | 2023-11-20Revision history:
2019-01-14 - Revised air cooling manifold piping (over intercooler intake) 2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-11-20 - Added missing step behind cab (right side) | |
| ALCO RS-11 ← → | " | " | " | As modified | 2023-11-20Revision history:
2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-11-20 - Added missing step behind cab (right side) |
| ALCO RS-11 ← → | 1957-11 - 1957-12 | 1a2 | NW 345-364 | 2023-11-20Revision history:
2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-11-20 - Added missing step behind cab (right side) | |
| ALCO RS-11 ← → | " | " | " | As modified | 2023-11-20Revision history:
2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-11-20 - Added missing step behind cab (right side) |
| ALCO RS-11 ← → | 1958-11 - 1958-12 | 1c1 | NW 365-376 | 2023-12-17Revision history:
2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-12-17 - Corrected number of radiator shutters | |
| ALCO RS-11 ← → | " | " | " | As modified | 2023-12-17Revision history:
2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-12-17 - Corrected number of radiator shutters |
| ALCO RS-11 ← → | 1959-01 - 1959-04 | 1c2 | NW 377-392 | 2023-12-17Revision history:
2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-12-17 - Corrected number of radiator shutters | |
| ALCO RS-11 ← → | " | " | " | As modified | 2023-12-17Revision history:
2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-12-17 - Corrected number of radiator shutters |
| ALCO RS-11 ← → | 1959-05 - 1959-06 | 2a1 | NW 393-400 | 2023-12-17Revision history:
2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-12-17 - Corrected number of radiator shutters | |
| ALCO RS-11 ← → | " | " | " | As modified | 2023-12-17Revision history:
2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-12-17 - Corrected number of radiator shutters |
| ALCO RS-11 ← → | 1961-05 - 1961-06 | 2b | NW 401-406 | 2023-12-17Revision history:
2019-08-21 - Decreased height of cab sub-base doors 2020-11-04 - Narrower cab side window 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-12-17 - Corrected number of radiator shutters | |
| ALCO RS-11 ← → | 1957-06 - 1957-07 | 1a2 | NYC 8000-8008 | 2023-11-20Revision history:
2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2020-11-04 - Narrower cab side window 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing 2022-03-23 - Coupler cut lever and pilot end handrail - Horn manifold and back cap dimensions 2023-11-20 - Added missing step behind cab (right side) | |
| ALCO RS-11 ← → | 1956-08 | 1a1 | PRR 8617-8625 | 2023-11-20Revision history:
2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing 2022-03-23 - Coupler cut lever and pilot end handrail - Horn manifold and back cap dimensions 2023-11-20 - Added missing step behind cab (right side) | |
| ALCO RS-11 ← → | 1957-02 - 1957-05 | 1a1 | PRR 8626-8635 | 2023-11-20Revision history:
2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2020-11-04 - Narrower cab side window 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing 2022-03-23 - Coupler cut lever and pilot end handrail - Horn manifold and back cap dimensions 2023-11-20 - Added missing step behind cab (right side) | |
| ALCO RS-11 ← → | 1957-11 - 1957-12 | 1a2 | PRR 8636-8654 | 2023-11-20Revision history:
2019-08-21 - Decreased height of cab sub-base doors - Revised base of handrail stanchion near long hood end 2020-11-04 - Narrower cab side window 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing 2022-03-23 - Coupler cut lever and pilot end handrail - Horn manifold and back cap dimensions 2023-11-20 - Added missing step behind cab (right side) | |
| ALCO RS-11 ← → | 1960-06 | 2a2 | SAL 100-109 | 2023-12-17Revision history:
2020-11-04 - Narrower cab side window - Removed short hood doors (left side) - Corrected minor line glitch in front sanding line (left side) - Changed brake wheel from surface-mounted to recessed (right side) 2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail - Horn manifold and back cap dimensions 2023-12-17 - Corrected number of radiator shutters | |
| ALCO RS-11 ← → | 1956-11 | 1a1 | SP 5723-5729 | re# 2903-2909 | 2023-11-20Revision history:
2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-11-20 - Added missing step behind cab (right side) |
| ALCO RS-11 ← → | 1959-04 - 1959-05 | 2a1 | SP 5845-5859 | re# 2910-2924 | 2023-12-17Revision history:
2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-12-17 - Corrected number of radiator shutters |
| ALCO RS-11 ← → | 1959-08 | 2a2 | SP 5860-5865 | re# 2925-2930 | 2023-12-17Revision history:
2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-12-17 - Corrected number of radiator shutters |
| ALCO RS-11 ← → | 1959-08 | 2a2 | SP 5866-5871 | re# 2931-2936 | 2023-12-17Revision history:
2021-08-01 - All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75") - Cab moved rearward by 0.5" and lengthened by 0.5" - Battery box and short hood side doors/grabirons moved rearward by 0.25" - Side handrail stanchion spacing - Cab sub-base door and hinge spacing - Footboards and pilot plate - Corrected too-short latch on hood door under air intake/intercooler (left side only) 2021-12-30 - Hood roof panels, hinges and exhaust housing - Removed extra bolt around radiator intakes 2022-03-23 - Coupler cut lever and pilot end handrail 2023-10-22 - Nathan P-series horn dimensions 2023-11-28 - Hood corner notch and side door dimensions 2023-12-17 - Corrected number of radiator shutters |
See also: