Model
| Built
| Phase
| Numbers
| Qty
| Notes
| Last modified
|
EMD GP35 ← →
| 1964-03 - 1964-04
| 1a2
| AA 385-390
| 6
| Type B trucks; no dynamic brakes
| 2022-02-04Revision history:
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
|
|
EMD GP35 ← →
| 1964-05 - 1964-06
| 1b1
| AA 391-394
| 4
| Type B trucks; no dynamic brakes
| 2022-02-04Revision history:
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
|
|
EMD GP35 ← →
| 1963-10
| 1a1
| ACL 909-915
| 7
| No dynamic brakes
| 2022-02-04Revision history:
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
EMD GP35 ← →
| 1964-01 - 1964-02
| 1a1
| ATSF 1300-1315
| 16
|
| 2022-03-02Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-03 - 1964-06
| 1a2
| ATSF 1316-1349
| 34
|
| 2022-03-02Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| "
| 1b1
| "
| "
|
| 2022-03-02Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1965-04 - 1965-05
| 1d
| ATSF 1350-1383
| 34
|
| 2022-03-02Revision history:
2018-11-11
- Revised blower duct (GP40-style: fewer bolts, edge seam)
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1965-06 - 1965-11
| 2b
| ATSF 1384-1460
| 77
|
| 2022-03-02Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2019-08-07
- Corrected line/crop issue at right of image
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-03 - 1964-04
| 1a2
| BO 3500-3519
| 20
|
| 2022-03-02Revision history:
2012-12-16
- Air reservoir size
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-05 - 1964-09
| 1b1
| BO 3540-3559; CO 3520-3539
| 20 + 20
|
| 2022-03-02Revision history:
2012-12-16
- Air reservoir size
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-09 - 1964-11
| 1b3
| CO 3560-3575
| 16
|
| 2022-03-02Revision history:
2012-12-16
- Air reservoir size
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1965-09 - 1965-12
| 2b
| BO 3581; CO 3537:2, 3563:2, 3574:2, 3582-3584
| 7
|
| 2022-03-02Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2019-08-07
- Corrected line/crop issue at right of image
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1963-12
| 1a1
| CBQ 978-981
| 4
|
| 2022-03-02Revision history:
2012-12-16
- Air reservoir size
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2016-10-16
- Changed horn to Leslie S-2M
2017-09-03
- Changed cab light from Gyralite to Mars light
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-03 - 1964-04
| 1a2
| CBQ 982-985
| 4
|
| 2022-03-02Revision history:
2012-12-16
- Air reservoir size
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2016-10-16
- Changed horn to Leslie S-2M
2017-09-03
- Changed cab light from Gyralite to Mars light
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-05 - 1964-08
| 1b1
| CBQ 986-993
| 8
|
| 2022-03-02Revision history:
2012-12-16
- Air reservoir size
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2016-10-16
- Changed horn to Leslie S-2M
2017-09-03
- Changed cab light from Gyralite to Mars light
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← ← →
| 1964-08 - 1964-12
| 1b2, 1b3, 1b4
| CBQ 994-996, 997-999
| 6
|
| 2022-03-02Revision history:
2012-12-16
- Air reservoir size
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2016-10-16
- Changed horn to Leslie S-2M
2017-09-03
- Changed cab light from Gyralite to Mars light
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-03
| 1a1
| CEI 244
| 1
|
| 2023-10-25Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1964-03
| 1a2
| CEI 242-243
| 2
|
| 2023-10-25Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1964-06 - 1964-07
| 1b1
| CEI 245-254
| 10
|
| 2023-10-25Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1964-09 - 1964-11
| 1b3
| CEI 255-264
| 10
|
| 2023-10-25Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1965-06
| 2b
| CEI 265-272
| 8
|
| 2023-10-25Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2019-08-07
- Corrected line/crop issue at right of image
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1964-02
| 1a1
| CNW 824-825
| 2
| No dynamic brakes
| 2022-03-21Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-03 - 1964-04
| 1a2
| CNW 826-833
| 8
| No dynamic brakes
| 2022-03-21Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
- Removed dynamic brakes (left-side view)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-04
| 1a2
| CNW 834-843
| 10
| No dynamic brakes
| 2022-03-21Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-05 - 1964-06
| 1b1
| DRGW 3029-3038
| 10
|
| 2022-02-04Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2018-11-14
- Revised steps and pilots
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
EMD GP35 ← →
| 1964-12 - 1965-01
| 1b4
| DRGW 3039-3047
| 9
|
| 2022-02-04Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2018-11-14
- Revised steps and pilots
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
EMD GP35 ← →
| 1965-01
| 1c1
| DRGW 3048-3050
| 3
|
| 2022-02-04Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)
2018-11-14
- Revised steps and pilots
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
EMD GP35 ← →
| 1964-01 - 1964-02
| 1a1
| DTI 350-357
| 8
| No dynamic brakes
| 2022-02-04Revision history:
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
EMD GP35 ← →
| 1964-09
| 1b1
| EL 2551-2562
| 12
|
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1965-08 - 1965-09
| 2b
| EL 2563-2586
| 24
|
| 2022-03-02Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2019-08-07
- Corrected line/crop issue at right of image
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1963-07 - 1963-08
| 1a1
| EMDX 5652, 5654
| 2
|
| 2022-03-02Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-02
| 1a1
| EMDX 5661
| 1
| re# EMDX 1964
| 2022-03-02Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-02
| 1a1
| GMO 601-605
| 5
| Type B Trucks
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2014-11-27
- Revised trucks
2015-07-26
- Added missing fuel gauge (left side)
2016-02-25
- Revised horn
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-03 - 1964-04
| 1a2
| GMO 606-612
| 7
| Type B Trucks
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2014-11-27
- Revised trucks
2015-07-26
- Added missing fuel gauge (left side)
2016-02-25
- Revised horn
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-08 - 1964-09
| 1b1
| GMO 613-624
| 12
| Type B Trucks
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2014-11-27
- Revised trucks
2015-07-26
- Added missing fuel gauge (left side)
2016-02-25
- Revised horn
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← → →
| 1965-01 - 1965-03
| 1c1, 1c2
| GMO 625-636
| 12
| Type B Trucks
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2014-11-27
- Revised trucks
2015-07-26
- Added missing fuel gauge (left side)
2016-02-25
- Revised horn
2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2020-12-28
- Brake chain bracket (left side)
- Added pole pockets near steps
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1965-08 - 1965-09
| 2c
| GMO 637-648
| 12
| Type B Trucks
| 2022-03-02Revision history:
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-02 - 1964-05
| 1a2
| LN 1100-1113
| 14
| No dynamic brakes
| 2022-03-02Revision history:
2012-12-16
- Air reservoir size
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2017-01-04
- Removed hand brake (left side)
2017-10-07
- Removed hand brake chain (right side)
- Corrected minor line glitch on latches on first engine room door (right side)
2018-11-11
- Corrected minor line glitch on latches on first engine room door (left side)
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-11
| 1b4
| LN 1114-1115
| 2
| No dynamic brakes
| 2022-03-02Revision history:
2012-12-16
- Air reservoir size
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2017-01-04
- Removed hand brake (left side)
2017-10-07
- Removed hand brake chain (right side)
- Corrected minor line glitch on latches on first engine room door (right side)
2018-11-11
- Corrected minor line glitch on latches on first engine room door (left side)
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1963-12 - 1964-01
| 1a1
| MP 600-624
| 25
| No dynamic brakes Post-delivery radiator screens
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
- Removed end drop step and handrail chains
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← → →
| 1965-01 - 1965-04
| 1c1, 1c2
| MP 625-634, 635-649
| 25
| No dynamic brakes Post-delivery radiator screens
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
- Removed end drop step and handrail chains
- Removed dynamic brakes (right-side views)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1963-11 - 1963-12
| 1a1
| NW 200-214
| 15
| High short hood
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2017-05-16
- Added grabiron at top of short hood
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2019-08-10
- Corrected glitch in short hood headlight
2020-01-30
- Replaced all-weather cab window (as-modified) with standard window (as-built)
- Added awning
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-03 - 1964-04
| 1a2
| NW 215-239
| 25
| High short hood
| 2022-03-02Revision history:
2014-10-23
- Radiator and dynamic brake fans (bottom rim edge and upper rim clips)
- Truck shape and casting logos
2017-05-16
- Added grabiron at top of short hood
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2019-08-10
- Corrected glitch in short hood headlight
2020-01-30
- Replaced all-weather cab window (as-modified) with standard window (as-built)
- Added awning
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← → →
| 1965-01 - 1965-03
| 1c1, 1c2
| NW 1309-1328
| 20
| High short hood
| 2022-03-02Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2019-08-10
- Corrected glitch in short hood headlight
2020-01-30
- Replaced all-weather cab window (as-modified) with standard window (as-built)
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-05 - 1964-06
| 1b1
| PRR 2252-2296
| 45
|
| 2022-03-02Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-02
- Corrected mismatched front right handrail (right side)
- Added MU connector on end handrails
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-11
| 1b3
| PRR 2297-2310
| 14
| 2309, 2310 re# 2250, 2251
| 2022-03-02Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-02
- Corrected mismatched front right handrail (right side)
- Added MU connector on end handrails
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← → →
| 1965-01 - 1965-04
| 1c1, 1c2
| PRR 2311-2370
| 60
| 2369, 2370 re# 2309, 2310
| 2022-03-02Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-01
- Corrected mismatched front right handrail (right side)
- Added MU connector on end handrails
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1963-12
| 1a1
| RDG 6501-6506
| 6
| re# 3620-3625
| 2022-03-02Revision history:
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2018-11-15
- Corrected glitch in speed recorder cable
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1964-08 - 1964-09
| 1b1
| RDG 3626-3655
| 30
|
| 2022-03-02Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1965-05
| 1d
| RDG 3656
| 1
|
| 2022-03-02Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1965-04
| 2a
| RI 300-304
| 5
| No dynamic brakes
| 2023-10-25Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2019-08-07
- Corrected line/crop issue at right of image
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1965-05 - 1965-08
| 2b
| RI 305-333
| 29
| No dynamic brakes
| 2023-10-25Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2019-08-07
- Corrected line/crop issue at right of image
2020-12-06
- Increased handrail thickness
- Revised radiator fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1965-04
| 2a
| SLSF 717-719
| 3
|
| 2022-03-02Revision history:
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1965-04 - 1965-12
| 2b
| SLSF 720-724, 732
| 6
|
| 2022-03-02Revision history:
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1965-12
| 2c
| SLSF 725-731
| 7
| Type B trucks
| 2022-03-02Revision history:
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2020-12-28
- Brake chain bracket (left side)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1963-12
| 1a1
| SOU 210-214
| 5
| High short hood Central of Georgia
| 2022-02-04Revision history:
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
EMD GP35 ← → →
| 1964-12 - 1965-04
| 1c1, 1c2
| SOU 2645-2702, 2705-2715
| 58 + 11
| Type B Trucks; high short hood 2705-2715 Savannah & Atlanta
| 2022-02-04Revision history:
2021-02-09
- Added missing end transoms on trucks
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
|
|
EMD GP35 ← →
| 1965-02
| 1c1
| SOU 2703-2704
| 2
| High short hood
| 2022-02-04Revision history:
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
EMD GP35 ← →
| 1963-12 - 1964-02
| 1a1
| SP 7408-7455; SSW 760-763
| 48 + 4
| re# SP 6520-6567, SSW 6500-6503
| 2023-10-25Revision history:
2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2018-11-14
- Added circular vent on top of short hood
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1964-02 - 1964-03
| 1a2
| SP 7456-7464
| 9
| re# SP 6568-6576
| 2023-10-25Revision history:
2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2018-11-14
- Added circular vent on top of short hood
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1964-05 - 1964-06
| 1b1
| SP 7465-7484
| 20
| re# SP 6577-6596
| 2023-10-25Revision history:
2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2018-11-14
- Added circular vent on top of short hood
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1964-12
| 1b4
| SP 7700-7712; SSW 764-771
| 13 + 8
| re# SP 6597-6609, SSW 6504-6511
| 2023-10-25Revision history:
2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards
2018-11-11
- Corrected minor line glitch on latches on first engine room door
2018-11-14
- Added circular vent on top of short hood
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← → →
| 1965-02 - 1965-03
| 1c1, 1c2
| SP 7713-7720, 7721-7727; SSW 772-775, 776-779
| 15 + 8
| re# SP 6610-6617, 6618-6624, SSW 6512-6515, 6516-6519
| 2023-10-25Revision history:
2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards
2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)
2018-11-14
- Added circular vent on top of short hood
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1965-04 - 1965-06
| 1c2
| SP 7728-7761
| 34
| re# SP 6625-6658
| 2023-10-25Revision history:
2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards
2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)
2018-11-14
- Added circular vent on top of short hood
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| "
| 1d
| "
| "
| "
| 2023-10-25Revision history:
2017-10-16
- Added circular hatch on long hood end
- Removed long hood number boards
2018-11-11
- Corrected minor line glitch on latches on first engine room door
- Revised blower duct (GP40-style: fewer bolts, edge seam)
2018-11-14
- Added circular vent on top of short hood
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2020-01-18
- Added lift rings below radiator intakes
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1965-07 - 1965-11
| 2b
| SP 7762-7782; SSW 780-781
| 21 + 2
| re# SP 6659-6679, SSW 6680-6681
| 2023-10-25Revision history:
2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
2019-08-07
- Corrected line/crop issue at right of image
2020-01-18
- Added lift rings below radiator intakes
- Removed rear numberboards
- Added circular panels on long hood end
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2021-01-13
- Fuel tank height and gap from underframe
- Fuel tank vent pipe (increased diameter, revised fittings)
- Handrail stanchions above fuel tank (left side)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
2022-11-08
- Fuel filler
2023-10-25
- Nathan P-series horn dimensions
|
|
EMD GP35 ← →
| 1964-05 - 1964-07
| 1b1
| UP 740-761
| 22
|
| 2022-03-02Revision history:
2020-12-06
- Increased handrail thickness
- Revised radiator and dynamic brake fans (48" fans)
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
2022-03-02
- Horn manifold and back cap dimensions
|
|
EMD GP35 ← →
| 1963-11
| 1a1
| WP 3001-3010
| 10
|
| 2022-02-04Revision history:
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
EMD GP35 ← →
| 1964-11
| 1b4
| WP 3011-3012
| 2
|
| 2022-02-04Revision history:
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|
EMD GP35 ← →
| 1965-03 - 1965-04
| 1c2
| WP 3013-3022
| 10
|
| 2022-02-04Revision history:
2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Dynamic brake housing dimensions and shape
- Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts
|
|