Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - EMD SD45

Selected scales:


1:18 Drawings

Model Built Phase Numbers Notes Last modified
EMD SD45
  
1970-06 -
1970-09
2b2 BN 6472-6497
2022-03-29Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box

2020-11-07
- Corrected sand line glitch near steps (right side)

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1971-05 -
1971-08
2c BN 6498-6542
2022-03-29Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box

2020-11-07
- Corrected sand line glitch near steps (right side)

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1971-10 -
1971-12
2c, 3 BN 6543-6567, CS 868-874 BN units Phase 3; CS units Phase 2c
CS 868-874 to BN 6570-6576
2022-03-29Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box

2020-11-07
- Corrected sand line glitch near steps (right side)

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1969-01 2b1 CBQ 516-530
2023-01-24Revision history:

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions

2023-01-24
- Removed end drop steps and handrail chains
EMD SD45
  
1967-02 -
1967-03
1b1 CNW 901-920
2022-03-21Revision history:

2014-12-31
- Underframe height
- Truck details and casting logos

2017-03-18
- Narrower cab sub-base ribs

2017-05-20
- Revised handrail stanchion at rear of walkway blower duct

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box

2020-11-07
- Added antenna

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1969-01 -
1969-02
2b1 CNW 937-977
2022-12-05Revision history:

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1967-06 1c EL 3601-3620
2022-03-21Revision history:

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1968-05 2a3 EL 3621-3634
2022-03-29Revision history:

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1965-12 -
1966-01
1a1 EMDX 4351-4353
2022-03-21Revision history:

2014-12-31
- Underframe height
- Truck details and casting logos

2017-05-20
- Removed dynamic brake roof vent
- Revised handrail stanchion at rear of walkway blower duct

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1966-07 -
1966-09
1a3 NW 1700-1734 High short hood
2022-03-21Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Corrected glitch in short hood headlight
- Added missing grabiron ahead of right-side battery box

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1967-04 -
1967-05
1b2 NW 1735-1738 High short hood
2022-03-21Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Corrected glitch in short hood headlight
- Added missing grabiron ahead of right-side battery box

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1967-07 -
1967-08
2a1 NW 1739-1764 High short hood
2022-03-29Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Corrected glitch in short hood headlight
- Added missing grabiron ahead of right-side battery box

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1969-12 -
1970-03
2b1 NW 1765-1814 High short hood, clasp brakes
2022-12-05Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Corrected glitch in short hood headlight
- Added missing grabiron ahead of right-side battery box

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1968-08 2b1 PC 6235-6239
2022-12-05Revision history:

2017-05-20
- Removed dynamic brake roof vent

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1966-10 -
1967-02
1b1 PRR 6105-6169
2022-03-21Revision history:

2014-12-31
- Underframe height
- Truck details and casting logos

2017-03-18
- Narrower cab sub-base ribs
- Cab side wind deflectors

2017-05-20
- Removed dynamic brake roof vent
- Revised handrail stanchion at rear of walkway blower duct

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-02
- Added MU connector on end handrails

2021-01-10
- Fuel tank height and gap from underframe

2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1967-12 -
1968-02
2a2 PRR 6170-6234
2022-03-29Revision history:

2017-05-20
- Removed dynamic brake roof vent
- Revised handrail stanchion at rear of walkway blower duct

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-02
- Added MU connector on end handrails

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1967-07 2a1 RDG 7600-7604
2022-03-29Revision history:

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1968-10 2b1 SCL 2010-2023
2022-03-29Revision history:

2017-05-20
- Removed dynamic brake roof vent
- Revised handrail stanchion at rear of walkway blower duct

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box

2020-11-07
- Corrected sand line glitch near steps (right side)

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1971-09 -
1971-10
2c SCL 2024-2044
2022-03-29Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box

2020-11-07
- Corrected sand line glitch near steps (right side)

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1967-02 -
1967-05
1b2 SLSF 900-913
2022-03-21Revision history:

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1968-02 2a3 SLSF 914-925
2022-03-29Revision history:

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1968-10 -
1969-10
2b1 SLSF 926-942
2022-12-05Revision history:

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
  
1969-12 2b1 SLSF 943-948
2022-12-05Revision history:

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
EMD SD45
   
1967-11 -
1967-12
2a3 SOU 3105-3121, 3122-3159 High short hood
2022-03-29Revision history:

2017-05-20
- Removed dynamic brake roof vent

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box
- Corrected glitch in cab eave drip rail

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
EMD SD45
  
1970-03 2b2 SOU 3100-3104, 3160-3169 High short hood
2022-12-05Revision history:

2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans

2017-11-11
- Revised central hood door spacing

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box
- Corrected glitch in cab eave drip rail

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
EMD SD45
  
1966-08 -
1966-09
1a3 SP 8800-8844
2022-12-07Revision history:

2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors

2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward

2019-08-10
- Added missing grabiron ahead of right-side battery box

2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-10
- Fuel tank height and gap from underframe

2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points

2022-11-08
- Fuel fillers

2022-12-07
- Added hatch ahead of dynamic brake intake
- Fuel tank vent pipe
EMD SD45
  
1967-02 -
1967-04
1b2 SP 8845-8893 2022-12-07
EMD SD45
  
1967-05 -
1967-07
1b2 SP 8894-8934 2022-12-07
EMD SD45
  
1968-02 -
1968-05
2a3 SP 8935-8963 2022-12-11
EMD SD45
  
1968-02 -
1968-06
2a3 SSW 8964-8981 2022-12-11
EMD SD45
  
1968-12 -
1970-03
2b1 SP 8982-9051, 9069-9151 2022-12-11
EMD SD45
  
1969-01 -
1970-01
2b1 SSW 9052-9068, 9152-9155 2022-12-11

See also: