Drawings > Undecorated Drawings - By Type > EMD SD45
Undecorated Drawings - EMD SD45
| Selected scales: |
1:18 Drawings
| Model | Built | Phase | Numbers | Qty | Notes | Last modified |
|---|---|---|---|---|---|---|
| EMD SD45 ← → | 1970-06 - 1970-09 | 2b2 | BN 6472-6497 | 26 | 2022-03-29Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-07 - Corrected sand line glitch near steps (right side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1971-05 - 1971-08 | 2c | BN 6498-6542 | 45 | 2022-03-29Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-07 - Corrected sand line glitch near steps (right side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1971-10 - 1971-12 | 2c, 3 | BN 6543-6567, CS 868-874 | 25 + 7 | BN units Phase 3; CS units Phase 2c CS 868-874 to BN 6570-6576 | 2022-03-29Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-07 - Corrected sand line glitch near steps (right side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions |
| EMD SD45 ← → | 1969-01 | 2b1 | CBQ 516-530 | 15 | 2023-01-24Revision history:
2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions 2023-01-24 - Removed end drop steps and handrail chains | |
| EMD SD45 ← → | 1967-02 - 1967-03 | 1b1 | CNW 901-920 | 20 | 2022-03-21Revision history:
2014-12-31 - Underframe height - Truck details and casting logos 2017-03-18 - Narrower cab sub-base ribs 2017-05-20 - Revised handrail stanchion at rear of walkway blower duct 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-07 - Added antenna 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1969-01 - 1969-02 | 2b1 | CNW 937-977 | 41 | 2022-12-05Revision history:
2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1967-06 | 1c | EL 3601-3620 | 20 | 2022-03-21Revision history:
2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1968-05 | 2a3 | EL 3621-3634 | 14 | 2022-03-29Revision history:
2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1965-12 - 1966-01 | 1a1 | EMDX 4351-4353 | 3 | 2022-03-21Revision history:
2014-12-31 - Underframe height - Truck details and casting logos 2017-05-20 - Removed dynamic brake roof vent - Revised handrail stanchion at rear of walkway blower duct 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1966-07 - 1966-09 | 1a3 | NW 1700-1734 | 35 | High short hood | 2022-03-21Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Corrected glitch in short hood headlight - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions |
| EMD SD45 ← → | 1967-04 - 1967-05 | 1b2 | NW 1735-1738 | 4 | High short hood | 2022-03-21Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Corrected glitch in short hood headlight - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions |
| EMD SD45 ← → | 1967-07 - 1967-08 | 2a1 | NW 1739-1764 | 26 | High short hood | 2022-03-29Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Corrected glitch in short hood headlight - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions |
| EMD SD45 ← → | 1969-12 - 1970-03 | 2b1 | NW 1765-1814 | 50 | High short hood, clasp brakes | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Corrected glitch in short hood headlight - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions |
| EMD SD45 ← → | 1968-08 | 2b1 | PC 6235-6239 | 5 | 2022-12-05Revision history:
2017-05-20 - Removed dynamic brake roof vent 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1966-10 - 1967-02 | 1b1 | PRR 6105-6169 | 65 | 2022-03-21Revision history:
2014-12-31 - Underframe height - Truck details and casting logos 2017-03-18 - Narrower cab sub-base ribs - Cab side wind deflectors 2017-05-20 - Removed dynamic brake roof vent - Revised handrail stanchion at rear of walkway blower duct 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-02 - Added MU connector on end handrails 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1967-12 - 1968-02 | 2a2 | PRR 6170-6234 | 65 | 2022-03-29Revision history:
2017-05-20 - Removed dynamic brake roof vent - Revised handrail stanchion at rear of walkway blower duct 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-02 - Added MU connector on end handrails 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1967-07 | 2a1 | RDG 7600-7604 | 5 | 2022-03-29Revision history:
2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1968-10 | 2b1 | SCL 2010-2023 | 14 | 2022-03-29Revision history:
2017-05-20 - Removed dynamic brake roof vent - Revised handrail stanchion at rear of walkway blower duct 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-07 - Corrected sand line glitch near steps (right side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1971-09 - 1971-10 | 2c | SCL 2024-2044 | 41 | 2022-03-29Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-07 - Corrected sand line glitch near steps (right side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1967-02 - 1967-05 | 1b2 | SLSF 900-913 | 14 | 2022-03-21Revision history:
2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1968-02 | 2a3 | SLSF 914-925 | 12 | 2022-03-29Revision history:
2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1968-10 - 1969-10 | 2b1 | SLSF 926-942 | 17 | 2022-12-05Revision history:
2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → | 1969-12 | 2b1 | SLSF 943-948 | 6 | 2022-12-05Revision history:
2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
| EMD SD45 ← → → | 1967-11 - 1967-12 | 2a3 | SOU 3105-3121, 3122-3159 | 17 + 38 | High short hood | 2022-03-29Revision history:
2017-05-20 - Removed dynamic brake roof vent 2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box - Corrected glitch in cab eave drip rail 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points |
| EMD SD45 ← → | 1970-03 | 2b2 | SOU 3100-3104, 3160-3169 | 15 | High short hood | 2022-12-05Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Revised bottom flange of dynamic brake and radiator fans 2017-11-11 - Revised central hood door spacing 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box - Corrected glitch in cab eave drip rail 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points |
| EMD SD45 ← → | 1966-08 - 1966-09 | 1a3 | SP 8800-8844 | 45 | 2022-12-07Revision history:
2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Middle section of hood moved rearward by 1" - Rear section of hood shortened by 1" - Increased height of walkway blower duct and bottom of hood doors 2019-01-28 - Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-11-08 - Fuel fillers 2022-12-07 - Added hatch ahead of dynamic brake intake - Fuel tank vent pipe | |
| EMD SD45 ← → | 1967-02 - 1967-04 | 1b2 | SP 8845-8893 | 49 | 2022-12-07 | |
| EMD SD45 ← → | 1967-05 - 1967-07 | 1b2 | SP 8894-8934 | 41 | 2022-12-07 | |
| EMD SD45 ← → | 1968-02 - 1968-05 | 2a3 | SP 8935-8963 | 29 | 2022-12-11 | |
| EMD SD45 ← → | 1968-02 - 1968-06 | 2a3 | SSW 8964-8981 | 18 | 2022-12-11 | |
| EMD SD45 ← → | 1968-12 - 1970-03 | 2b1 | SP 8982-9051, 9069-9151 | 153 | 2022-12-11 | |
| EMD SD45 ← → | 1969-01 - 1970-01 | 2b1 | SSW 9052-9068, 9152-9155 | 21 | 2022-12-11 | |
1:36 Drawings
| Model | Built | Phase | Numbers | Notes |
|---|---|---|---|---|
| EMD SD45 ← → | 1969-01 | 2b | CBQ 516-530 | |
| EMD SD45 ← → | 1967-01 - 1967-02 | 1b1 | DRGW 5315-5324 | |
| EMD SD45 ← → | 1967-06 | 1c | EL 3601-3620 | |
| EMD SD45 ← → | 1968-05 | 2b | EL 3621-3634 | |
| EMD SD45 ← → | 1965-12 - 1966-01 | 1a1 | EMDX 4351-4353 | |
| EMD SD45 ← → | 1966-07 - 1966-09 | 1a3 | NW 1700-1734 | |
| EMD SD45 ← → | 1967-04 - 1967-05 | 1b2 | NW 1735-1738 | |
| EMD SD45 ← → | 1967-07 - 1967-08 | 2a1 | NW 1739-1764 | |
| EMD SD45 ← → | 1969-12 - 1970-03 | 2b | NW 1765-1814 | |
| EMD SD45 ← → | 1968-08 | 2b | PC 6235-6239 | |
| EMD SD45 ← → | 1966-10 - 1967-02 | 1b1 | PRR 6105-6169 | |
| EMD SD45 ← → | 1967-12 - 1968-02 | 2a2 | PRR 6170-6234 | |
| EMD SD45 ← → | 1967-07 - 1967-08 | 2a1 | RDG 7600-7604 | |
| EMD SD45 ← → | 1967-11 - 1967-12 | 2a2 | SOU 3105-3159 | |
| EMD SD45 ← → | 1970-03 | 2b | SOU 3100-3104, 3160-3169 | |
1:55 Drawings
| Model | Phase | Numbers | Notes | Accuracy |
|---|---|---|---|---|
| EMD SD45 ← → | 1a2 | ACL 1024-1033 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 1a2 | ATSF 1800-1829 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 1b1 | ATSF 1830-1889 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 2b | ATSF 5590-5624 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 1b1 | CNW 901-920 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 2b1 | CNW 937-977 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 1c | EL 3601-3620 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 1a1 | EMDX 4351-4353 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 1a2 | GN 400-407 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | " | " | GN 403, 407 as modified | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
| EMD SD45 ← → | 1b2 | GN 408-417 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | " | " | GN 412-413 as modified | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
| EMD SD45 ← → | 2b | GN 418-426 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 1a3 | NW 1700-1734 | High short hood | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
| EMD SD45 ← → | 1b2 | NW 1735-1738 | High short hood | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
| EMD SD45 ← → | 2a1 | NW 1739-1764 | High short hood | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
| EMD SD45 ← → | 2b1 | PC 6235-6239 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 1b1 | PRR 6105-6169 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 2a2 | PRR 6170-6234 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 2a1 | RDG 7600-7604 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 1b2 | SLSF 900-913 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 2a3 | SLSF 914-925 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 2b1 | SLSF 926-948 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | SOU version | *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
| EMD SD45 ← → | 1a3 | SP 8800-8844 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 1b2 | SP 8845-8888 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 1b2 | SP 8889-8934 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 2a3 | SP 8935-8963 SSW 8964-8981 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD45 ← → | 2b | SP 8982-9051, 9069-9151 SSW 9052-9068, 9152-9155 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
See also: