Model
| Built
| Phase
| Numbers
| Qty
| Notes
| Last modified
|
EMD SD45 ← →
| 1970-06 - 1970-09
| 2b2
| BN 6472-6497
| 26
|
| 2022-03-29Revision history:
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
2020-11-07
- Corrected sand line glitch near steps (right side)
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1971-05 - 1971-08
| 2c
| BN 6498-6542
| 45
|
| 2022-03-29Revision history:
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
2020-11-07
- Corrected sand line glitch near steps (right side)
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1971-10 - 1971-12
| 2c, 3
| BN 6543-6567, CS 868-874
| 25 + 7
| BN units Phase 3; CS units Phase 2c CS 868-874 to BN 6570-6576
| 2022-03-29Revision history:
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
2020-11-07
- Corrected sand line glitch near steps (right side)
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1969-01
| 2b1
| CBQ 516-530
| 15
|
| 2023-01-24Revision history:
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
2023-01-24
- Removed end drop steps and handrail chains
|
|
EMD SD45 ← →
| 1967-02 - 1967-03
| 1b1
| CNW 901-920
| 20
|
| 2022-03-21Revision history:
2014-12-31
- Underframe height
- Truck details and casting logos
2017-03-18
- Narrower cab sub-base ribs
2017-05-20
- Revised handrail stanchion at rear of walkway blower duct
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
2020-11-07
- Added antenna
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1969-01 - 1969-02
| 2b1
| CNW 937-977
| 41
|
| 2022-12-05Revision history:
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1967-06
| 1c
| EL 3601-3620
| 20
|
| 2022-03-21Revision history:
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1968-05
| 2a3
| EL 3621-3634
| 14
|
| 2022-03-29Revision history:
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1965-12 - 1966-01
| 1a1
| EMDX 4351-4353
| 3
|
| 2022-03-21Revision history:
2014-12-31
- Underframe height
- Truck details and casting logos
2017-05-20
- Removed dynamic brake roof vent
- Revised handrail stanchion at rear of walkway blower duct
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1966-07 - 1966-09
| 1a3
| NW 1700-1734
| 35
| High short hood
| 2022-03-21Revision history:
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Corrected glitch in short hood headlight
- Added missing grabiron ahead of right-side battery box
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1967-04 - 1967-05
| 1b2
| NW 1735-1738
| 4
| High short hood
| 2022-03-21Revision history:
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Corrected glitch in short hood headlight
- Added missing grabiron ahead of right-side battery box
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1967-07 - 1967-08
| 2a1
| NW 1739-1764
| 26
| High short hood
| 2022-03-29Revision history:
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Corrected glitch in short hood headlight
- Added missing grabiron ahead of right-side battery box
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1969-12 - 1970-03
| 2b1
| NW 1765-1814
| 50
| High short hood, clasp brakes
| 2022-12-05Revision history:
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Corrected glitch in short hood headlight
- Added missing grabiron ahead of right-side battery box
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1968-08
| 2b1
| PC 6235-6239
| 5
|
| 2022-12-05Revision history:
2017-05-20
- Removed dynamic brake roof vent
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1966-10 - 1967-02
| 1b1
| PRR 6105-6169
| 65
|
| 2022-03-21Revision history:
2014-12-31
- Underframe height
- Truck details and casting logos
2017-03-18
- Narrower cab sub-base ribs
- Cab side wind deflectors
2017-05-20
- Removed dynamic brake roof vent
- Revised handrail stanchion at rear of walkway blower duct
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-02
- Added MU connector on end handrails
2021-01-10
- Fuel tank height and gap from underframe
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1967-12 - 1968-02
| 2a2
| PRR 6170-6234
| 65
|
| 2022-03-29Revision history:
2017-05-20
- Removed dynamic brake roof vent
- Revised handrail stanchion at rear of walkway blower duct
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-02
- Added MU connector on end handrails
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1967-07
| 2a1
| RDG 7600-7604
| 5
|
| 2022-03-29Revision history:
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1968-10
| 2b1
| SCL 2010-2023
| 14
|
| 2022-03-29Revision history:
2017-05-20
- Removed dynamic brake roof vent
- Revised handrail stanchion at rear of walkway blower duct
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
2020-11-07
- Corrected sand line glitch near steps (right side)
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1971-09 - 1971-10
| 2c
| SCL 2024-2044
| 41
|
| 2022-03-29Revision history:
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
2020-11-07
- Corrected sand line glitch near steps (right side)
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1967-02 - 1967-05
| 1b2
| SLSF 900-913
| 14
|
| 2022-03-21Revision history:
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1968-02
| 2a3
| SLSF 914-925
| 12
|
| 2022-03-29Revision history:
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1968-10 - 1969-10
| 2b1
| SLSF 926-942
| 17
|
| 2022-12-05Revision history:
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← →
| 1969-12
| 2b1
| SLSF 943-948
| 6
|
| 2022-12-05Revision history:
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
|
|
EMD SD45 ← → →
| 1967-11 - 1967-12
| 2a3
| SOU 3105-3121, 3122-3159
| 17 + 38
| High short hood
| 2022-03-29Revision history:
2017-05-20
- Removed dynamic brake roof vent
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
- Corrected glitch in cab eave drip rail
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
|
|
EMD SD45 ← →
| 1970-03
| 2b2
| SOU 3100-3104, 3160-3169
| 15
| High short hood
| 2022-12-05Revision history:
2017-10-08
- Corrected minor line glitch on latches on first engine room door
- Revised bottom flange of dynamic brake and radiator fans
2017-11-11
- Revised central hood door spacing
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
- Corrected glitch in cab eave drip rail
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
|
|
EMD SD45 ← →
| 1966-08 - 1966-09
| 1a3
| SP 8800-8844
| 45
|
| 2022-12-07Revision history:
2019-01-17
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Middle section of hood moved rearward by 1"
- Rear section of hood shortened by 1"
- Increased height of walkway blower duct and bottom of hood doors
2019-01-28
- Shifted rear 4 engine compartment doors, rear hood doors, radiators and dynamic brakes 0.5" forward
2019-08-10
- Added missing grabiron ahead of right-side battery box
2020-12-21
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
2021-01-10
- Fuel tank height and gap from underframe
2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
2022-11-08
- Fuel fillers
2022-12-07
- Added hatch ahead of dynamic brake intake
- Fuel tank vent pipe
|
|
EMD SD45 ← →
| 1967-02 - 1967-04
| 1b2
| SP 8845-8893
| 49
|
| 2022-12-07
|
|
EMD SD45 ← →
| 1967-05 - 1967-07
| 1b2
| SP 8894-8934
| 41
|
| 2022-12-07
|
|
EMD SD45 ← →
| 1968-02 - 1968-05
| 2a3
| SP 8935-8963
| 29
|
| 2022-12-11
|
|
EMD SD45 ← →
| 1968-02 - 1968-06
| 2a3
| SSW 8964-8981
| 18
|
| 2022-12-11
|
|
EMD SD45 ← →
| 1968-12 - 1970-03
| 2b1
| SP 8982-9051, 9069-9151
| 153
|
| 2022-12-11
|
|
EMD SD45 ← →
| 1969-01 - 1970-01
| 2b1
| SSW 9052-9068, 9152-9155
| 21
|
| 2022-12-11
|
|