Model
| Built
| Phase
| Numbers
| Qty
| Notes
| Last modified
|
EMD SD60 ← →
| 1986-08 - 1986-10
|
| CNW 8001-8055
| 55
|
| 2023-01-19Revision history:
2017-07-01
- Removed angled braces under front walkway extension
- Corrected latches on first and last tall hood doors
2017-12-31
- Revised angled sheet behind bottom step
- Revised piping behind fuel tank
2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
- Revised hood behind cab (right-side view)
2020-11-28
- Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2020-12-26
- Corrected location of handrail attachment point to rear of cab (left side)
2021-01-10
- Fuel tank height and gap from underframe
2022-12-12
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-19
- Hood door and radiator intake height
|
|
EMD SD60 ← →
| 1989-06 - 1989-07
|
| CR 6843-6857
| 15
|
| 2023-01-19Revision history:
2017-07-01
- Corrected latches on first and last tall hood doors
2017-12-31
- Revised piping behind fuel tank
2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
- Revised hood behind cab (right-side view)
2020-11-28
- Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2020-12-26
- Corrected location of handrail attachment point to rear of cab (left side)
2021-01-10
- Fuel tank height and gap from underframe
2021-01-27
- Corrected line glitch in speed recorder cable at axle
2022-12-12
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
2023-01-19
- Hood door and radiator intake height
|
|
EMD SD60 ← →
| 1986-10 - 1986-12
|
| EMDX 9000-9099
| 100
| Oakway Leasing
| 2023-01-19Revision history:
2017-07-01
- Corrected latches on first and last tall hood doors
2017-12-31
- Revised angled sheet behind bottom step
- Revised piping behind fuel tank
2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
- Revised hood behind cab (right-side view)
2020-11-28
- Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2020-12-26
- Corrected location of handrail attachment point to rear of cab (left side)
2021-01-10
- Fuel tank height and gap from underframe
2021-01-22
- Relocated horn
2022-12-12
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
2023-01-19
- Hood door and radiator intake height
|
|
EMD SD60 ← →
| 1986-02 - 1986-05
|
| UP 6000-6059
| 60
|
| 2023-01-19Revision history:
2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
- Revised hood behind cab (right-side view)
2020-11-28
- Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2020-12-26
- Corrected location of handrail attachment point to rear of cab (left side)
2021-01-10
- Fuel tank length, height and gap from underframe
2022-12-12
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
2023-01-19
- Hood door and radiator intake height
|
|
EMD SD60 ← →
| 1988-02 - 1988-06
|
| UP 6060-6084
| 25
|
| 2023-01-19Revision history:
2020-01-05
- Revised center hood door spacing
- Increased height of walkway blower duct and bottom of hood doors
- Revised hood behind cab (right-side view)
2020-11-28
- Shifted first hood door, inertial air intake, dynamic brakes and blower duct rearward by 0.25" to 0.5"
2020-12-03
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
2020-12-05
- Increased fuel tank vent pipe diameter
- Sand lines (larger pipe diameter, revised hoses)
2020-12-26
- Corrected location of handrail attachment point to rear of cab (left side)
2021-01-10
- Fuel tank length, height and gap from underframe
2022-12-12
- Coupler cut levers
- Corner handrail end plate / stairwell attachment points
- Horn manifold and back cap dimensions
2023-01-19
- Hood door and radiator intake height
|
|