Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - EMD SD70MAC

Selected scales:


1:18 Drawings

Model Built Phase Numbers Notes Last modified
EMD SD70MAC
  
1993-11 -
1994-08
1a BN 9400-9474
2022-03-30Revision history:

2021-01-11
- Fuel tank height and gap from underframe

2021-01-22
- Added rear numberboards
- Added circular hatches on long hood top end

2021-02-26
- Cab door (4 hinges instead of 3) (left side)

2021-01-18
- Added missing portion of brake levers near brake cylinders

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
  
1994-08 -
1995-01
1b BN 9475-9499, 9504-9511, 9542-9571
2022-03-30Revision history:

2021-01-11
- Fuel tank height and gap from underframe

2021-02-26
- Cab door (4 hinges instead of 3) (left side)

2022-01-18
- Access panels on bottom corners of nose
- Added missing portion of brake levers near brake cylinders

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
  
1995-01 -
1995-03
1c1 BN 9512-9541
2022-03-30Revision history:

2021-01-11
- Fuel tank height and gap from underframe

2021-02-26
- Cab door (4 hinges instead of 3) (left side)

2022-01-18
- Access panels on bottom corners of nose
- Added missing portion of brake levers near brake cylinders

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
  
1995-03 -
1995-07
1c2 BN 9572-9716
2022-03-30Revision history:

2021-01-11
- Fuel tank height and gap from underframe

2021-02-26
- Cab door (increased height and angled top corner) (right side)

2022-01-18
- Access panels on bottom corners of nose
- Added missing portion of brake levers near brake cylinders

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
  
1996-01 -
1996-05
1d BNSF 9717-9775
2022-03-30Revision history:

2020-12-16
- Added missing bolts on outer secondary suspension blocks of HTCR trucks

2020-12-30
- Revised fuel tank height
- Added line representing top edge of fuel tank
- Added missing bolt on second handrail stanchion behind cab (left side)
- Wider right front / left rear inverter cabinet panels
- Narrower spacing of walkway supports on blower duct (left side)

2021-01-11
- Fuel tank height and gap from underframe

2021-02-26
- Cab door (increased height and angled top corner) (right side)

2022-01-18
- Access panels on bottom corners of nose
- Added missing portion of brake levers near brake cylinders

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
   
1997-01 -
1997-03
1e1, 1e2 BNSF 9776-9782, 9783-9802
2022-03-30Revision history:

2020-12-16
- Added missing bolts on outer secondary suspension blocks of HTCR trucks

2020-12-30
- Revised fuel tank height
- Added line representing top edge of fuel tank
- Added missing bolt on second handrail stanchion behind cab (left side)
- Wider right front / left rear inverter cabinet panels

2021-01-11
- Fuel tank height and gap from underframe

2021-02-26
- Cab door (increased height and angled top corner) (right side)

2022-01-18
- Access panels on bottom corners of nose
- Axle bearing adapters on trucks
- Added missing portion of brake levers near brake cylinders

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
  
1997-03 -
1997-08
1f1 BNSF 9803-9837
2022-03-30Revision history:

2020-12-16
- Added missing bolts on outer secondary suspension blocks of HTCR trucks

2020-12-30
- Revised fuel tank height
- Added line representing top edge of fuel tank
- Added missing bolt on second handrail stanchion behind cab (left side)
- Wider right front / left rear inverter cabinet panels

2021-01-11
- Fuel tank height and gap from underframe

2021-02-26
- Cab door (increased height and angled top corner) (right side)

2022-01-18
- Access panels on bottom corners of nose
- Axle bearing adapters on trucks
- Added missing portion of brake levers near brake cylinders

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
  
1997-11 -
1997-12
1f1 BNSF 9838-9864
2022-03-30Revision history:

2020-12-16
- Added missing bolts on outer secondary suspension blocks of HTCR trucks

2020-12-30
- Revised fuel tank height
- Added line representing top edge of fuel tank
- Added missing bolt on second handrail stanchion behind cab (left side)
- Wider right front / left rear inverter cabinet panels

2021-01-11
- Fuel tank height and gap from underframe

2021-02-26
- Cab door (increased height and angled top corner) (right side)

2022-01-18
- Access panels on bottom corners of nose
- Axle bearing adapters on trucks
- Added missing portion of brake levers near brake cylinders

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
  
1997-12 -
1999-01
1f2 BNSF 8800-8807; 9865-9999 BNSF 8806 combination of Phase 1f2 and 1g1 details
2022-03-30Revision history:

2020-12-16
- Added missing bolts on outer secondary suspension blocks of HTCR trucks

2020-12-30
- Revised fuel tank height
- Added line representing top edge of fuel tank
- Added missing bolt on second handrail stanchion behind cab (left side)
- Wider right front / left rear inverter cabinet panels

2021-01-11
- Fuel tank height and gap from underframe

2021-02-26
- Cab door (increased height and angled top corner) (right side)

2022-01-18
- Access panels on bottom corners of nose
- Axle bearing adapters on trucks
- Added missing portion of brake levers near brake cylinders

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
  
1999-01 -
1999-03
1g1 BNSF 8808-8811; some of 8812-8842
2022-03-30Revision history:

2020-12-16
- Added missing bolts on outer secondary suspension blocks of HTCR trucks

2020-12-30
- Revised fuel tank height
- Added line representing top edge of fuel tank
- Added missing bolt on second handrail stanchion behind cab (left side)

2021-01-11
- Fuel tank height and gap from underframe

2021-02-26
- Cab door (increased height and angled top corner) (right side)

2022-01-18
- Access panels on bottom corners of nose
- Axle bearing adapters on trucks
- Added missing portion of brake levers near brake cylinders

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
   
1999-03 -
2000-10
1g1, 1g2 some of BNSF 8812-8842; 8843-8989;
TFM 1600-1674
2022-03-30Revision history:

2020-12-16
- Added missing bolts on outer secondary suspension blocks of HTCR trucks

2020-12-30
- Revised fuel tank height
- Added line representing top edge of fuel tank
- Added missing bolt on second handrail stanchion behind cab (left side)

2021-01-11
- Fuel tank height and gap from underframe

2021-02-26
- Cab door (increased height and angled top corner) (right side)

2022-01-18
- Access panels on bottom corners of nose
- Axle bearing adapters on trucks
- Added missing portion of brake levers near brake cylinders

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
  
1998-03 -
1998-06
1f2 CR 4130-4144 built to CSXT specs
to CSXT 775-789; re# 4575-4589
2022-03-30Revision history:

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
  
1997-07 -
1997-09
1f1 CSXT 700-724 re# 4500-4524
2022-03-30Revision history:

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points
EMD SD70MAC
  
1999-08 -
2000-03
1g2 CSXT 725-774 re# 4525-4574
2022-03-30Revision history:

2022-03-30
- Coupler cut levers
- Corner handrail end plate attachment points

See also: