Drawings > Undecorated Drawings - By Type > EMD SD70MAC
Undecorated Drawings - EMD SD70MAC
| Selected scales: |
1:18 Drawings
| Model | Built | Phase | Numbers | Qty | Notes | Last modified |
|---|---|---|---|---|---|---|
| EMD SD70MAC ← → | 1993-11 - 1994-08 | 1a | BN 9400-9474 | 75 | 2023-01-20Revision history:
2021-01-11 - Fuel tank height and gap from underframe 2021-01-22 - Added rear numberboards - Added circular hatches on long hood top end 2021-02-26 - Cab door (4 hinges instead of 3) (left side) 2021-01-18 - Added missing portion of brake levers near brake cylinders 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot | |
| EMD SD70MAC ← → | 1994-08 - 1995-01 | 1b | BN 9475-9499, 9504-9511, 9542-9571 | 63 | 2023-01-20Revision history:
2021-01-11 - Fuel tank height and gap from underframe 2021-02-26 - Cab door (4 hinges instead of 3) (left side) 2022-01-18 - Access panels on bottom corners of nose - Added missing portion of brake levers near brake cylinders 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot | |
| EMD SD70MAC ← → | 1995-01 - 1995-03 | 1c1 | BN 9512-9541 | 30 | 2023-01-20Revision history:
2021-01-11 - Fuel tank height and gap from underframe 2021-02-26 - Cab door (4 hinges instead of 3) (left side) 2022-01-18 - Access panels on bottom corners of nose - Added missing portion of brake levers near brake cylinders 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot | |
| EMD SD70MAC ← → | 1995-03 - 1995-07 | 1c2 | BN 9572-9716 | 145 | 2023-01-20Revision history:
2021-01-11 - Fuel tank height and gap from underframe 2021-02-26 - Cab door (increased height and angled top corner) (right side) 2022-01-18 - Access panels on bottom corners of nose - Added missing portion of brake levers near brake cylinders 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot | |
| EMD SD70MAC ← → | 1996-01 - 1996-05 | 1d | BNSF 9717-9775 | 59 | 2023-01-20Revision history:
2020-12-16 - Added missing bolts on outer secondary suspension blocks of HTCR trucks 2020-12-30 - Revised fuel tank height - Added line representing top edge of fuel tank - Added missing bolt on second handrail stanchion behind cab (left side) - Wider right front / left rear inverter cabinet panels - Narrower spacing of walkway supports on blower duct (left side) 2021-01-11 - Fuel tank height and gap from underframe 2021-02-26 - Cab door (increased height and angled top corner) (right side) 2022-01-18 - Access panels on bottom corners of nose - Added missing portion of brake levers near brake cylinders 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot | |
| EMD SD70MAC ← ← → | 1997-01 - 1997-03 | 1e1, 1e2 | BNSF 9776-9782, 9783-9802 | 27 | 2023-01-24Revision history:
2020-12-16 - Added missing bolts on outer secondary suspension blocks of HTCR trucks 2020-12-30 - Revised fuel tank height - Added line representing top edge of fuel tank - Added missing bolt on second handrail stanchion behind cab (left side) - Wider right front / left rear inverter cabinet panels 2021-01-11 - Fuel tank height and gap from underframe 2021-02-26 - Cab door (increased height and angled top corner) (right side) 2022-01-18 - Access panels on bottom corners of nose - Axle bearing adapters on trucks - Added missing portion of brake levers near brake cylinders 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-07-12 - Axle shock strut locations 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot | |
| EMD SD70MAC ← → | 1997-03 - 1997-08 | 1f1 | BNSF 9803-9837 | 35 | 2023-01-24Revision history:
2020-12-16 - Added missing bolts on outer secondary suspension blocks of HTCR trucks 2020-12-30 - Revised fuel tank height - Added line representing top edge of fuel tank - Added missing bolt on second handrail stanchion behind cab (left side) - Wider right front / left rear inverter cabinet panels 2021-01-11 - Fuel tank height and gap from underframe 2021-02-26 - Cab door (increased height and angled top corner) (right side) 2022-01-18 - Access panels on bottom corners of nose - Axle bearing adapters on trucks - Added missing portion of brake levers near brake cylinders 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-07-12 - Axle shock strut locations 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot | |
| EMD SD70MAC ← → | 1997-11 - 1997-12 | 1f1 | BNSF 9838-9864 | 27 | 2023-01-24Revision history:
2020-12-16 - Added missing bolts on outer secondary suspension blocks of HTCR trucks 2020-12-30 - Revised fuel tank height - Added line representing top edge of fuel tank - Added missing bolt on second handrail stanchion behind cab (left side) - Wider right front / left rear inverter cabinet panels 2021-01-11 - Fuel tank height and gap from underframe 2021-02-26 - Cab door (increased height and angled top corner) (right side) 2022-01-18 - Access panels on bottom corners of nose - Axle bearing adapters on trucks - Added missing portion of brake levers near brake cylinders 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-07-12 - Axle shock strut locations 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot | |
| EMD SD70MAC ← → | 1997-12 - 1999-01 | 1f2 | BNSF 8800-8807; 9865-9999 | 143 | BNSF 8806 combination of Phase 1f2 and 1g1 details | 2023-01-24Revision history:
2020-12-16 - Added missing bolts on outer secondary suspension blocks of HTCR trucks 2020-12-30 - Revised fuel tank height - Added line representing top edge of fuel tank - Added missing bolt on second handrail stanchion behind cab (left side) - Wider right front / left rear inverter cabinet panels 2021-01-11 - Fuel tank height and gap from underframe 2021-02-26 - Cab door (increased height and angled top corner) (right side) 2022-01-18 - Access panels on bottom corners of nose - Axle bearing adapters on trucks - Added missing portion of brake levers near brake cylinders 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-07-12 - Axle shock strut locations 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot |
| EMD SD70MAC ← → | 1999-01 - 1999-03 | 1g1 | BNSF 8808-8811; some of 8812-8842 | 4 (+ 31) | 2023-01-24Revision history:
2020-12-16 - Added missing bolts on outer secondary suspension blocks of HTCR trucks 2020-12-30 - Revised fuel tank height - Added line representing top edge of fuel tank - Added missing bolt on second handrail stanchion behind cab (left side) 2021-01-11 - Fuel tank height and gap from underframe 2021-02-26 - Cab door (increased height and angled top corner) (right side) 2022-01-18 - Access panels on bottom corners of nose - Axle bearing adapters on trucks - Added missing portion of brake levers near brake cylinders 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-07-12 - Axle shock strut locations 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot | |
| EMD SD70MAC ← → → | 1999-03 - 2000-10 | 1g1, 1g2 | some of BNSF 8812-8842; 8843-8989; TFM 1600-1674 | (31) + 147 + 75 | 2023-01-20Revision history:
2020-12-16 - Added missing bolts on outer secondary suspension blocks of HTCR trucks 2020-12-30 - Revised fuel tank height - Added line representing top edge of fuel tank - Added missing bolt on second handrail stanchion behind cab (left side) 2021-01-11 - Fuel tank height and gap from underframe 2021-02-26 - Cab door (increased height and angled top corner) (right side) 2022-01-18 - Access panels on bottom corners of nose - Axle bearing adapters on trucks - Added missing portion of brake levers near brake cylinders 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-07-12 - Axle shock strut locations 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot | |
| EMD SD70MAC ← → | 1998-03 - 1998-06 | 1f2 | CR 4130-4144 | 15 | built to CSXT specs to CSXT 775-789; re# 4575-4589 | 2023-01-24Revision history:
2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-07-12 - Axle shock strut locations 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot |
| EMD SD70MAC ← → | 1997-07 - 1997-09 | 1f1 | CSXT 700-724 | 25 | re# 4500-4524 | 2023-01-24Revision history:
2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-07-12 - Axle shock strut locations 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot |
| EMD SD70MAC ← → | 1999-08 - 2000-03 | 1g2 | CSXT 725-774 | 50 | re# 4525-4574 | 2023-01-20Revision history:
2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-07-12 - Axle shock strut locations 2023-01-20 - Hood door and radiator intake height - Inverter cabinet dimensions - MU sockets on pilot |
1:55 Drawings
| Model | Phase | Numbers | Notes | Accuracy |
|---|---|---|---|---|
| EMD SD70MAC ← → | 1a | BN 9400-9474 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD70MAC ← → | 1b | BN 9475-9499, 9504-9571 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD70MAC ← ← → | 1c, 1d | BN 9572-9716; BNSF 9717-9775 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD70MAC ← → | 1f1 | BNSF 9803-9864 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD70MAC ← → | 1f1, 1g1, 1g2 | BNSF 8800-8989, 9865-9999 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
| EMD SD70MAC ← → | 2 | CSXT 4701-4830 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
See also: