| Model
| Built
| Phase
| Numbers
| Qty
| Notes
| Last modified
|
GE C30-7
← →
| 1977-12 -
1978-06
| 1a
| ATSF 8010-8057
| 48
| Hyatt wheel bearings shown;
Timken bearings (as on later units) on approx. 8048+
| 2022-08-03Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank
2018-12-01
- Corrected height of wheel bearings
- Removed brake lever pins from truck sideframe
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1978-10
| 1b
| ATSF 8058-8063
| 6
|
| 2022-08-03Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank
2018-12-01
- Removed brake lever pins from truck sideframe
2019-12-27
- Revised fuel cutoff switch housing
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1979-04 -
1979-05
| 1c
| ATSF 8064-8098
| 35
| Adirondack trucks
| 2022-08-03Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2018-12-01
- Removed brake lever pins from truck sideframe
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| "
| "
| "
| "
| Rockwell trucks
| 2022-08-03Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2018-12-01
- Removed brake lever pins from truck sideframe
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1980-05 -
1980-06
| 2b
| ATSF 8099-8122
| 24
| Adirondack trucks
| 2022-08-03Revision history:
2018-12-01
- Removed brake lever pins from truck sideframe
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| "
| "
| "
| "
| Rockwell trucks
| 2022-08-03Revision history:
2018-12-01
- Removed brake lever pins from truck sideframe
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1981-05
| 2c
| ATSF 8123-8132, 8134, 8136
| 12
| Adirondack trucks
| 2022-08-03Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2018-11-30
- Removed front louvers from right-side cab sub-base
2018-12-01
- Removed brake lever pins from truck sideframe
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler cutout in side frame
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| "
| "
| "
| "
| Rockwell trucks
| 2022-08-03Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2018-11-30
- Removed front louvers from right-side cab sub-base
2018-12-01
- Removed brake lever pins from truck sideframe
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler cutout in side frame
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1981-06
| 2c
| ATSF 8133, 8135, 8137-8152
| 18
| Adirondack trucks
Locotrol-equipped
| 2022-08-03Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2018-12-01
- Removed brake lever pins from truck sideframe
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler cutout in side frame
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| "
| "
| "
| "
| Rockwell trucks
Locotrol-equipped
| 2022-08-03Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2018-12-01
- Removed brake lever pins from truck sideframe
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler cutout in side frame
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1983-01
| 2e
| ATSF 8153-8166
| 14
| Adirondack trucks
| 2022-08-03Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2018-12-01
- Removed brake lever pins from truck sideframe
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Corrected sand line glitch behind front truck (right side)
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab
- Added drip rail over door behind cab
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
- Added missing section of inner sand line brackets (under #3 and #4 axles) (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| "
| "
| "
| "
| Rockwell trucks
| 2022-08-03Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2018-12-01
- Removed brake lever pins from truck sideframe
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Corrected sand line glitch behind front truck (right side)
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab
- Added drip rail over door behind cab
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
- Added missing section of inner sand line brackets (under #3 and #4 axles) (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1976-09 -
1977-12
| 1a
| BN 5500-5544
| 45
| Adirondack trucks
A small minority had Rockwell trucks
| 2022-08-03Revision history:
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
|
|
|
GE C30-7
← →
| 1978-09 -
1979-02
| 1b
| BN 5545-5581
| 37
| Adirondack trucks
5567-5581 had lower fuel cutoff switch (as on later units)
| 2022-08-03Revision history:
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
|
|
|
GE C30-7
← →
| "
| "
| "
| "
| Rockwell trucks
| 2022-08-03Revision history:
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
|
|
|
GE C30-7
← →
| 1979-06 -
1979-11
| 1c
| BN 5000-5046, 5582-5599
| 65
| Adirondack trucks
| 2022-08-03Revision history:
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
|
|
|
GE C30-7
← →
| "
| "
| "
| "
| Rockwell trucks
| 2022-08-03Revision history:
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
|
|
|
GE C30-7
← →
| 1980-02 -
1980-07
| 2a
| BN 5047-5126
| 80
| Adirondack trucks
| 2022-08-03Revision history:
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing rear class lights (left side)
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
|
|
|
GE C30-7
← →
| "
| "
| "
| "
| Rockwell trucks
| 2022-08-03Revision history:
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing rear class lights (left side)
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
|
|
|
GE C30-7
← →
| 1981-03 -
1981-06
| 2c
| BN 5127-5141
| 15
| Adirondack trucks
| 2022-08-03Revision history:
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab
2021-02-15
- Added missing rear class lights (left side)
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
|
|
|
GE C30-7
← →
| "
| "
| "
| "
| Rockwell trucks
| 2022-08-03Revision history:
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab
2021-02-15
- Added missing rear class lights (left side)
- Added missing section of pipe for handbrake chain (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
- Changed horn from Leslie S-3K to Prime PM-990
|
|
|
GE C30-7
← →
| 1977-11
| 1a
| CR 6600-6609
| 10
|
| 2022-08-03Revision history:
2016-12-30
- Added flange lubricators
- Corrected front left truck brake line
- Added missing right rear air pipe vent valve
- Revised top corner steps
2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank
2020-11-18
- Revised horn
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1979-02
| 1b
| (F.L.)
LN 7000-7015
| 16
| Adirondack trucks
| 2023-02-18Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank
2020-11-18
- Revised horn
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
2023-02-18
- Bottom taper on stairwell side sheet
|
|
|
GE C30-7
← →
| "
| "
| "
| "
| Rockwell trucks
| 2023-02-18Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank
2020-11-18
- Revised horn
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
2023-02-18
- Bottom taper on stairwell side sheet
|
|
|
GE C30-7
← →
| 1979-03
| 1b
| (F.L.)
SCL 7016-7024
| 9
| Adirondack trucks
| 2023-02-18Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank
2020-11-18
- Revised horn
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
2023-02-18
- Bottom taper on stairwell side sheet
|
|
|
GE C30-7
← →
| "
| "
| "
| "
| Rockwell trucks
| 2023-02-18Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Changed air reservoir brackets to early style with vertical C-channel supports
- Added end-mounted fuel gauge on fuel tank
2020-11-18
- Revised horn
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
2023-02-18
- Bottom taper on stairwell side sheet
|
|
|
GE C30-7
← →
| 1979-08
| 1c
| (F.L.)
SCL 7025-7031
| 7
|
| 2023-02-18Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2021-01-04
- Increased corner handrail thickness
2021-01-27
- Removed partial valve from air line behind front steps
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
2023-02-18
- Bottom taper on stairwell side sheet
|
|
|
GE C30-7
← →
| 1979-09
| 1c
| (F.L.)
LN 7032-7051
| 20
|
| 2023-02-18Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2021-01-04
- Increased corner handrail thickness
2021-01-27
- Removed partial valve from air line behind front steps
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
2023-02-18
- Bottom taper on stairwell side sheet
|
|
|
GE C30-7
← →
| 1980-03
| 2a
| (F.L.)
SCL 7052-7061
| 10
|
| 2023-02-18Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2021-01-04
- Increased corner handrail thickness
2021-01-27
- Removed partial valve from air line behind front steps
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
2023-02-18
- Bottom taper on stairwell side sheet
|
|
|
GE C30-7
← →
| 1980-07
| 2b
| (F.L.)
LN 7062-7069
| 8
|
| 2023-02-18Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2021-01-04
- Increased corner handrail thickness
2021-01-27
- Removed partial valve from air line behind front steps
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
2023-02-18
- Bottom taper on stairwell side sheet
|
|
|
GE C30-7
← →
| 1981-10
| 2c
| (F.L.)
SCL 7070-7094
| 25
|
| 2023-02-18Revision history:
2018-11-22
- Revised air reservoir height and brackets
- Added end-mounted fuel gauge on fuel tank
2020-11-18
- Revised horn
2021-01-04
- Increased corner handrail thickness
2021-01-27
- Removed partial valve from air line behind front steps
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Changed bolted strip / front hood doors to later-phase version
- Longer handrail stanchion in front of cab (right side)
- Revised seams under door behind cab
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
2023-02-18
- Bottom taper on stairwell side sheet
|
|
|
GE C30-7
← →
| 1979-09 -
1979-11
| 1c
| NdeM 6701-6729
| 29
| Export (Mexico)
| 2022-08-03Revision history:
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1979-11 -
1981-01
| 2a
| NdeM 6730-6799, 9600-9646
| 70 + 47
| Export (Mexico)
| 2022-08-03Revision history:
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1981-04 -
1981-08
| 2c
| FCP 434-455; NdeM 9647-9652
| 22 + 6
| Export (Mexico)
| 2022-08-03Revision history:
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1982-01 -
1982-02
| 2c
| some of NdeM 11001-11028
| 28
| Export (Mexico)
| 2022-08-03Revision history:
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1982-01 -
1982-03
| 2d
| some of NdeM 11001-11028; 11029-11039
| " + 11
| Export (Mexico)
| 2022-08-03Revision history:
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1982-06 -
1985-01
| 2e
| NdeM 11040-11128
| 89
| Export (Mexico)
| 2022-08-03Revision history:
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1986-05 -
1986-07
| 2f
| FCP 456-459; NdeM 11129-11148
| 4 + 20
| Export (Mexico)
| 2022-08-03Revision history:
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1978-11 -
1978-12
| 1b
| NW 8003-8037
| 35
|
| 2022-08-03Revision history:
2020-11-18
- Revised horn
2021-01-04
- Increased corner handrail thickness
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
|
|
|
GE C30-7
← →
| 1979-07 -
1979-10
| 1c
| NW 8038-8082
| 45
|
| 2022-08-03Revision history:
2021-01-04
- Increased corner handrail thickness
2021-01-29
- Added pipe in front of fuel tank (right side)
2021-02-12
- Added safety valve to front air reservoir (left side)
- Added notch and square hole at top of bolted strip behind front air intake (right side)
- Rear headlight and numberboards
- Fuel filler
- Longer handrail stanchion in front of cab (right side)
2021-02-15
- Added missing rear class lights (left side)
2022-08-03
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets
- Horn manifold and back cap dimensions
|
|
