Undecorated Drawings - IC
Selected scales: |
1:18 Drawings
Model | Built | Phase | Numbers | Notes | Last modified |
---|---|---|---|---|---|
EMD GP10 ← → | 1970 - 1977 (R) | 3a | IC 8000 - 8400 series | some Phase 3a units initially had footboards 36" fans, front fuel filler | 2023-07-10Revision history:
2020-12-05 - Increased handrail thickness - Fewer bolts around radiator intake screens 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | " | " | " | 36" fans, rear fuel filler | 2023-07-10Revision history:
2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | " | " | " | 48" fans, front fuel filler | 2023-07-10Revision history:
2020-12-05 - Increased handrail thickness - Revised radiator fans - Fewer bolts around radiator intake screens 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | " | " | IC 8343, 8346, 8370 | 48" fans, rear fuel filler | 2023-07-10Revision history:
2020-12-05 - Increased handrail thickness - Revised radiator fans - Fewer bolts around radiator intake screens 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | " | " | IC 8317, 8335, 8383, 8391, 8392 | 48" fans, rear fuel filler GP7 rebuild | 2023-07-10Revision history:
2020-12-05 - Increased handrail thickness - Revised radiator fans - Fewer bolts around radiator intake screens 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Revised draft gear housing 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | 1974 - 1977 (R) | 3b | IC 8028, 8138 | some Phase 3b units initially had footboards 36" fans, front fuel filler | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side 2020-12-05 - Increased handrail thickness - Fewer bolts around radiator intake screens 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | " | " | IC 8000, 8008, 8098, 8103, 8104, 8117, 8123, 8147, 8156, 8178, 8202, 8283, 8302, 8308, 8446 | 36" fans, rear fuel filler | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | " | " | IC 8024, 8037, 8043, 8046, 8095, 8116 | 36" fans, rear fuel filler GP7 rebuild | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Revised draft gear housing 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | " | " | IC 8130, 8136, 8153 | 48" fans, front fuel filler | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | " | " | IC 8097, 8126, 8359 | 48" fans, rear fuel filler | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | " | " | IC 8361 | 48" fans, rear fuel filler GP7 rebuild | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Revised draft gear housing 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | 1977 (R) | 3c | IC 8057, 8089, 8174, 8214, 8240, 8305, 8312, 8325 | 36" fans | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | " | " | IC 8050 | 48" fans | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | " | " | IC 8320 | 48" fans | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | 1977 (R) | 4 | IC 8054, 8086, 8309-8311, 8314, 8323-8324, 8330, 8358, 8462 | 36" fans | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | " | " | IC 8203 | 36" fans GP7 rebuild | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Revised draft gear housing 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP10 ← → | 1977 - 1978 (R) | " | IC 8080, 8109, 8315, 8319, 8331 | 48" fans | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP11 ← → | 1979 (R) | 1b | IC 8702, 8704-8707, 8709, 8712, 8715-8716 | 36" fans, rear fuel filler 8702 and 8704 had M-375 draft gear housing (as on 8701 and 8735) | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8710, 8717 | 36" fans, front fuel filler | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8703, 8711, 8714 | 48" fans, rear fuel filler 8703 had M-375 draft gear housing (as on 8701 and 8735) | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8701 | 48" fans, front fuel filler | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8708, 8713 | " | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | 1979 (R) | 2a | IC 8718-8719 | 36" fans, rear fuel filler | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8720 | 48" fans GP18 rebuild | 2024-01-04Revision history:
2017-10-30 - Revised rear headlight - Relocated fuel cutoff switch (farther rearward) - Revised underframe shape (longer sloped sections toward middle with thicker bottom plate) - Added traction motor cables in middle underframe - Added cooling water drain (above left rear truck) - Lower end handrail mounting points 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8721 | 36" fans, front fuel filler | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | 1979 (R) | 2b | IC 8722 | 48" fans, rear fuel filler GP7 rebuild | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Revised draft gear housing 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8724 | 36" fans, rear fuel filler | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8723, 8725 | " GP7 rebuild | 2024-01-04Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Revised draft gear housing 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | 1979 - 1981 (R) | 3 | IC 8727, 8730, 8732, 8736-8738, 8740, 8743, 8745 | 36" fans, rear fuel filler 8745 had M-375 draft gear housing (as on 8701 and 8735) | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8729, 8742, 8751 | " | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8744 | " GP7 rebuild | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Revised draft gear housing 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8735 | 36" fans, front fuel filler | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8749 | " | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8731, 8746 | 48" fans, rear fuel filler | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8752 | " | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → | " | " | IC 8747 | " GP7 rebuild | 2024-01-04Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP11 ← → → | " | " | IC 8726, 8728, 8733-8734, 8739, 8741, 8748, 8750, 8753 | 48" fans, front fuel filler 8734 had M-375 draft gear housing (as on 8701 and 8735) | 2024-01-04Revision history:
2014-01-24 - Sunshades - Window armrests - Oscitrol lights 2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Fewer bolts around radiator intake screens 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) 2024-01-04 - Nathan P-series horn dimensions |
EMD GP18 ← → | 1961-05 | 1 | BM 1770-1774 | 2023-07-10Revision history:
2017-10-30 - Revised rear headlight - Removed bottom hatches on long hood end - Relocated fuel cutoff switch (farther rearward) - Revised underframe shape (longer sloped sections toward middle with thicker bottom plate) - Added traction motor cables in middle underframe - Added cooling water drain (above left rear truck) - Revised step kick plates - Lower end handrail mounting points 2020-12-05 - Increased handrail thickness - Revised dynamic brake fan 2022-01-03 - Larger roof lift rings - Added lift rings around dynamic brakes - Removed grabiron behind rear fan - Exhaust stacks 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Footboard height increased by 1.25" - Revised coupler carrier / draft gear - Horn manifold and back cap dimensions 2023-02-07 - Removed handrail stanchion top clamps - Adjusted handrail stanchion spacing next to short hood 2023-02-16 - Fuel tank height - Fuel filler 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) | |
EMD GP18 ← → | 1961-05 | 1 | BM 1775 | 2023-07-10Revision history:
2017-10-30 - Revised rear headlight - Removed bottom hatches on long hood end - Relocated fuel cutoff switch (farther rearward) - Revised underframe shape (longer sloped sections toward middle with thicker bottom plate) - Added traction motor cables in middle underframe - Added cooling water drain (above left rear truck) - Revised step kick plates - Lower end handrail mounting points 2020-12-05 - Increased handrail thickness - Revised radiator and dynamic brake fans 2022-01-03 - Larger roof lift rings - Added lift rings around dynamic brakes - Removed grabiron behind rear fan - Exhaust stacks 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Footboard height increased by 1.25" - Revised coupler carrier / draft gear - Horn manifold and back cap dimensions 2023-02-07 - Removed handrail stanchion top clamps - Adjusted handrail stanchion spacing next to short hood 2023-02-16 - Fuel tank height - Fuel filler 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) | |
EMD GP18 ← → | 1960-03 | 1 | IC 9400-9414 | 2023-07-10Revision history:
2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings - Added lift rings on short hood - Removed grabiron behind rear fan - Exhaust stacks 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Footboard height increased by 1.25" - Revised coupler carrier / draft gear 2022-11-15 - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-01-14 - Added toilet drain pipe behind front steps (right side) 2023-02-04 - Corrected slight misplacement of bell (left side) 2023-02-07 - Removed handrail stanchion top clamps 2023-02-16 - Fuel tank height - Fuel filler 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) | |
EMD GP18 ← → | 1963-03 - 1963-10 | 2 | IC 9415-9428 | 2023-07-10Revision history:
2017-10-30 - Revised rear headlight - Removed bottom hatches on long hood end - Relocated fuel cutoff switch (farther rearward) - Revised underframe shape (longer sloped sections toward middle with thicker bottom plate) - Added traction motor cables in middle underframe - Added cooling water drain (above left rear truck) - Revised step kick plates - Lower end handrail mounting points 2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings - Removed grabiron behind rear fan - Exhaust stacks 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Footboard height increased by 1.25" - Revised coupler carrier / draft gear 2022-11-15 - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-02-07 - Removed handrail stanchion top clamps - Adjusted handrail stanchion spacing next to short hood 2023-02-16 - Fuel tank height - Fuel filler 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) | |
EMD GP28 ← → | 1964-03 - 1963-09 | 1b1 | IC 9429-9437 | 2023-10-25Revision history:
2012-12-16 - Air reservoir size 2013-06-09 - Removed duplicate bell 2014-10-23 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-28 - Revised cab awning 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Corrected minor line glitch on latches on first engine room door 2020-12-06 - Increased handrail thickness - Revised radiator fans 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts | |
EMD GP28 ← → | 1964-11 | 1b2 | IC 9438 | 2023-10-25Revision history:
2012-12-16 - Air reservoir size 2013-06-09 - Removed duplicate bell 2014-10-23 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-28 - Revised cab awning 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Corrected minor line glitch on latches on first engine room door 2020-12-06 - Increased handrail thickness - Revised radiator fans 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts | |
EMD GP28 ← → | 1964-11 | 1b4 | IC 9439-9440 | 2023-10-25Revision history:
2012-12-16 - Air reservoir size 2013-06-09 - Removed duplicate bell 2014-10-23 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-28 - Revised cab awning 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Corrected minor line glitch on latches on first engine room door 2020-12-06 - Increased handrail thickness - Revised radiator fans 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts | |
EMD GP28 ← → | 1964-09 | 1b3 | MSC 211 | re# IC 9441 | 2022-03-02Revision history:
2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Corrected minor line glitch on latches on first engine room door 2020-12-06 - Increased handrail thickness - Revised radiator fans 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Added missing portion of #2 (left side) and #3 (right side) traction motor air ducts 2022-03-02 - Horn manifold and back cap dimensions |
EMD GP38AC ← → | 1970-02 | 2b | IC 9500-9519 | 2022-03-02Revision history:
2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised paper air filter housing and dynamic brake taper 2019-01-23 - Revised handrail stanchion spacing - Fuel tank and air reservoirs moved 1" to 1.5" rearward 2020-05-16 - Added ATS shoe on the right front axle - Revised cab side mirrors - Added water level sight glass (right side) 2020-12-04 - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Added missing pixel in left side frame above rear of fuel tank 2021-01-09 - Fuel tank height and gap from underframe 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-03-02 - Horn manifold and back cap dimensions | |
EMD GP40 ← → | 1966-01 - 1967-03 | 1a3 | IC 3000-3059 | 2023-12-28Revision history:
2018-10-31 - Corrected minor line glitch on latches on first engine room door 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Revised handrail stanchion spacing - Fuel tank and air reservoirs moved 1" to 1.5" rearward - Revised exhaust stack 2020-12-04 - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Added missing pixel in left side frame above rear of fuel tank 2021-01-09 - Fuel tank height and gap from underframe 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2023-12-28 - Nathan P-series horn dimensions | |
EMD GP40 ← → | 1969-08 - 1970-02 | 2b | IC 3060-3075 | 2022-03-02Revision history:
2014-10-22 - Truck shape and casting logos - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) 2018-10-31 - Corrected minor line glitch on latches on first engine room door 2019-01-17 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Revised handrail stanchion spacing - Fuel tank and air reservoirs moved 1" to 1.5" rearward - Revised exhaust stack 2020-05-16 - Added ATS shoe on the right front axle - Revised cab side mirrors - Added water level sight glass (right side) 2020-12-04 - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Added missing pixel in left side frame above rear of fuel tank 2021-01-09 - Fuel tank height and gap from underframe 2022-01-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points 2022-03-02 - Horn manifold and back cap dimensions | |
EMD GP8 ← → | 1977 - 1978 (R) | 3c | IC 7746, 7910, 7916 | Early GP7 rebuild | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Revised draft gear housing 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP8 ← → | 1977 (R) | " | IC 7913, 7965 | Late GP7 rebuild | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Revised draft gear housing 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP8 ← → | 1977 (R) | 4a | IC 7954 | Early GP7 rebuild | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Revised draft gear housing 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP8 ← → | " | " | IC 7911 | Late GP7 rebuild | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Revised draft gear housing 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP8 ← → | 1977 - 1978 (R) | 4b | IC 7908, 7912, 7915, 7917, 7918 | Early GP7 rebuild | 2023-07-10Revision history:
2014-10-24 - Radiator fans (bottom rim edge and upper rim clips) - Truck shape and casting logos 2016-02-29 - Added hood grabiron behind cab on engineer's side - Added pipe conduit behind cab on conductor's side 2020-12-05 - Increased handrail thickness 2022-01-03 - Larger roof lift rings 2022-11-17 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Revised coupler carrier - Revised draft gear housing 2023-02-21 - Fuel tank height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP9 ← → | 1954-04 - 1954-06 | 1a | IC 9000-9041 | As modified - fuel tank skirt, bell location (1960s) | 2023-07-10Revision history:
2023-02-16 - Fuel tank height - Fuel filler 2023-04-08 - Air reservoir piping (left side) 2023-04-24 - Step kick plate height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP9 ← → | 1954-12 | 1b | IC 9048-9067 | As modified - fuel tank skirt, bell location (1960s) | 2023-07-10Revision history:
2023-02-16 - Fuel tank height - Fuel filler 2023-04-08 - Air reservoir piping (left side) 2023-04-24 - Step kick plate height 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP9 ← → | 1955-01 - 1957-01 | 2 | IC 9068-9199, 9220-9257 | As modified - fuel tank skirt, bell location (1960s) | 2023-07-10Revision history:
2023-02-16 - Fuel tank height - Fuel filler 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) |
EMD GP9 ← → | 1957-12 - 1959-01 | 3c | IC 9300-9389 | 2023-07-10Revision history:
2020-12-05 - Increased handrail thickness - Revised radiator fans 2022-01-03 - Larger roof lift rings - Added lift rings on short hood - Removed grabiron behind rear fan - Exhaust stacks 2022-03-21 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Corner step height increased by 2" - Footboard height increased by 1.25" - Revised coupler carrier / draft gear 2022-11-15 - Changed draft gear housing from M-375/MS-485 to M-380/M-381 2023-01-14 - Added toilet drain pipe behind front steps (right side) 2023-02-04 - Corrected slight misplacement of bell (left side) 2023-02-07 - Removed handrail stanchion top clamps 2023-02-16 - Fuel tank height - Fuel filler 2023-07-10 - Moved latches under radiators from 2nd to 3rd door from long hood end (right side) | |
EMD SD40 ← → | 1967-12 | 2a2 | IC 6000-6005 | 2022-03-29Revision history:
2017-10-08 - Corrected minor line glitch on latches on first engine room door - Removed extra bolt on exhaust stack housing 2018-02-25 - Removed ballast plate above fuel tank 2019-01-18 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch 2019-01-23 - Revised exhaust stack - Corrected error with 4th handrail stanchion from rear 2019-08-10 - Added missing grabiron ahead of right-side battery box 2020-11-05 - Corrected line glitch in fuel filler (left side) 2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-10 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions | |
EMD SD40-2 ← → | 1975-12 | 1b2 | ICG 6030-6033 | 2023-01-09Revision history:
2014-02-17 - Truck shape and casting logos 2014-10-22 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) 2014-11-07 - Inertial air intakes (added ridge on top) - Revised center axle shock strut 2016-04-14 - Revised steps - Revised jacking pads (no casting hole) 2017-09-26 - Revised position of lift ring and flag holder at rear of long hood - Corrected minor line glitch on latches on first engine room door 2019-01-22 - Relocated front hood seam resulting in revised hood proportions - Front section of hood lengthened and blower duct widened by 1" - Revised hood section under inertial air intake - Gap from seam to middle hood doors shortened by 0.75" - Middle hood doors shortened by 0.25" - Increased height of walkway blower duct and bottom of hood doors - Corrected seam at bottom corners of long hood - Revised radiator intake grills and roof fan hatch - Revised exhaust stack 2020-12-18 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) - Sand lines (larger pipe diameter, revised hoses) - Adjusted height of center hinge of engine room doors - Added missing line segment in traction motor cables above fuel filler (left side) 2020-12-24 - Added raised rear uncoupling lever 2021-01-09 - Fuel tank height and gap from underframe 2022-03-19 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct - Horn manifold and back cap dimensions 2023-01-09 - Long hood end seams | |
EMD SD40A ← → | 1969-08 - 1970-01 | 2b1 | IC 6006-6023 | 2022-12-05Revision history:
2020-12-21 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) 2021-01-13 - Fuel tank height and gap from underframe 2022-03-29 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Horn manifold and back cap dimensions 2022-12-05 - Added sand pipes running below walkway sideframe | |
EMD SD70 ← → | 1995-04 - 1995-10 | 1c | IC 1000-1019 | 2023-01-19Revision history:
2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-12-21 - Fuel tank length 2023-01-19 - Hood door and radiator intake height - MU sockets on pilot | |
EMD SD70 ← → | 1999-02 | 1d2 | IC 1020-1039 | 2023-01-19Revision history:
2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points 2022-12-21 - Fuel tank length 2023-01-19 - Hood door and radiator intake height - MU sockets on pilot | |
GE Dash 9-44CW ← → | 2004-06 - 2004-09 | 2h | CN (IC) 2697-2726 | CN Class EF-644h | 2022-11-12Revision history:
2014-02-22 - Truck casting logo and text - Short hood height 2015-07-08 - Corrected air reservoir length - Added missing sand hose in front underframe - Added missing brake line on truck near brake chain (left side) - Corrected brake lines 2015-07-21 - Revised vertical bars in dynamic brake intakes 2016-02-20 - Added traction pin in center of trucks 2016-11-06 - Revised panel under cab on conductor's side 2017-01-23 - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location 2017-02-08 - Added empty handbrake chain bracket to front right truck - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Coupler cut lever and pilot details - Corner handrail and step bolts - Added numberboard seam |
1:36 Drawings
Model | Built | Phase | Numbers | Notes |
---|---|---|---|---|
ALCO C-636 ← → | 1968 | IC 1100-1105 | ||
EMD GP11 ← → | 1979 (R) | 1b | IC 8702, 8704-8707, 8709, 8712, 8715-8716 | 36" fans rear fuel filler |
EMD GP11 ← → | " | " | IC 8710, 8717 | 36" fans front fuel filler |
EMD GP11 ← → | " | " | IC 8703, 8711, 8714 | 48" fans rear fuel filler |
EMD GP11 ← → | " | " | IC 8708, 8713 | 48" fans front fuel filler |
EMD GP11 ← → | " | " | IC 8701 | " |
EMD GP11 ← → | 1979 (R) | 2 | IC 8718-8719, 8723-8725 | 36" fans rear fuel filler |
EMD GP11 ← → | " | " | IC 8721 | 36" fans front fuel filler |
EMD GP11 ← → | " | " | IC 8722 | 48" fans rear fuel filler |
EMD GP11 ← → | 1979 - 1981 (R) | 3 | IC 8727, 8729-8730, 8732, 8736-8738, 8740, 8742-8745, 8747, 8751 | 36" fans, rear fuel filler |
EMD GP11 ← → | " | " | IC 8735, 8749 | 36" fans front fuel filler |
EMD GP11 ← → | " | " | IC 8731, 8746, 8752 | 48" fans rear fuel filler |
EMD GP11 ← → | " | " | IC 8726, 8728, 8733-8734, 8739, 8741, 8748, 8750, 8753 | 48" fans front fuel filler |
EMD GP11 ← → | 1978 (R) | 1a | IC 8301 | First GP11 |
EMD SD20 ← → | 1979 - 1980 (R) | 1 | IC 2000, 2002-2010 | round-top fans |
EMD SD20 ← → | 1979 - 1980 (R) | 1 | IC 2001, 2011 | flat-top fans |
EMD SD20 ← → | 1980 (R) | 2 | IC 2012-2016, 2018, 2020-2022 | round-top fans |
EMD SD20 ← → | 1980 (R) | 2 | IC 2017, 2019, 2023 | flat-top fans |
EMD SD20 ← → | 1981 (R) | 3a | IC 2024 | |
EMD SD20 ← → | 1982 (R) | 3b | IC 2025 | |
EMD SD20 ← → | 1982 (R) | 3b | IC 2026 | wire grid radiator intakes |
EMD SD20 ← → | 1982 (R) | 3c | IC 2027-2029, 2031 | round-top fans |
EMD SD20 ← → | 1982 (R) | 3c | IC 2030 | flat-top fans wire grid radiator intakes |
EMD SD20 ← → | 1982 (R) | 3c | IC 2032-2037 | flat-top fans |
EMD SD70 ← → | 1995-04 - 1995-10 | 1c | IC 1000-1019 | |
EMD SD70 ← → | 1999-02 | 1d2 | IC 1020-1039 | |
GE Dash 9-44CW ← → | 2004 | 2h | CN (IC) 2697-2726 | CN Class EF-644h |
1:55 Drawings
Model | Phase | Numbers | Notes | Accuracy |
---|---|---|---|---|
EMD GP10 ← | 3a | IC Rebuild | 36" fans | *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD GP10 ← | 3a | IC Rebuild | 48" fans | *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD GP10 ← | 3b | IC Rebuild | 36" fans | *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD GP10 ← | 3b | IC Rebuild | 48" fans | *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD GP11 ← → | IC Rebuild | 36" fans | *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP11 ← → | IC Rebuild | 48" fans | *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP18 ← → | 2 | IC 9415-9428 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38-2 ← → | LLPX 2261, 2269, 2273-2274 | ex-IC GP40 rebuild | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38-2 ← → | LLPX 2259-2260, 2262-2263, 2267-2268, 2270-2271, 2275 | ex-IC GP40 rebuild | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38-2 ← → | LLPX 2263-2265, 2272, 2276 | ex-IC GP40 rebuild | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38AC ← → | 2b | IC 9500-9519 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP40 ← → | 1a3 | IC 3000-3059 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP8 ← | IC Rebuild | *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD20 ← → | IC 2000-2025 | flat-top fans | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD20 ← → | " | round-top fans | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD20 ← → | IC 2026-2037 | flat-top fans | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD20 ← → | " | round-top fans | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD40 ← → | 2a2 | IC 6000-6005 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD70 ← → | 1c, 1d2 | IC 1000-1039 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD70 ← → | " | " | As modified (truck swap to later HTCR) | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
GE U30B ← → | 1b | IC 5000-5005 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
See also: