Top header photo
 Trainiax logo
HomeNewContactLinks

Undecorated Drawings - LV

Selected scales:


1:18 Drawings

Model Built Phase Numbers Notes Last modified
ALCO C-420
  
1963-10 1b LV 404-415
2024-01-11Revision history:

2023-08-20
- Changed battery boxes from bolted to hinged

2024-01-11
- Hood door handles
ALCO PA-1
  
1947-08 -
1948-05
LV 601-614;
ALCO 1776
2022-03-13
ALCO RS-11
  
1960-03 2b LV 400-403
2023-12-17Revision history:

2019-08-21
- Decreased height of cab sub-base doors

2020-11-04
- Narrower cab side window

2021-08-01
- All long hood components moved rearward (radiator fan by 1.75", radiator intakes by 1", hood doors and center hood section by 0.75")
- Cab moved rearward by 0.5" and lengthened by 0.5"
- Battery box and short hood side doors/grabirons moved rearward by 0.25"
- Side handrail stanchion spacing
- Cab sub-base door and hinge spacing
- Footboards and pilot plate
- Corrected too-short latch on hood door under air intake/intercooler (left side only)

2021-12-30
- Hood roof panels, hinges and exhaust housing
- Removed extra bolt around radiator intakes

2022-03-23
- Coupler cut lever and pilot end handrail

2023-11-28
- Hood corner notch and side door dimensions

2023-12-17
- Corrected number of radiator shutters
EMD GP18
  
1960-05 -
1960-06
1 LV 302-305
2023-07-10Revision history:

2020-12-05
- Increased handrail thickness
- Revised radiator and dynamic brake fans

2022-01-03
- Larger roof lift rings
- Added lift rings around dynamic brakes
- Added lift rings on short hood
- Removed grabiron behind rear fan
- Exhaust stacks

2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Corner step height increased by 2"
- Footboard height increased by 1.25"
- Revised coupler carrier / draft gear

2022-11-15
- Changed draft gear housing from M-375/MS-485 to M-380/M-381

2023-01-14
- Added toilet drain pipe behind front steps (right side)

2023-02-07
- Removed handrail stanchion top clamps

2023-02-16
- Fuel tank height
- Fuel filler

2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
EMD GP38-2
  
1972-11 1b2 LV 314-325
2023-01-09Revision history:

2019-01-22
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Revised hood section under inertial air intake
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised paper air filter housing and dynamic brake taper
- Revised roof fan hatch

2019-01-24
- Front left traction motor cables moved 2.25" rearward
- Front right traction motor cables and air piping moved 0.75" to 1" rearward

2020-12-08
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator and dynamic brake fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)
- Increased metal sand pipe diameter
- Air pipe vent valve (left front / right rear under walkway)
- Front uncoupling lever

2021-01-09
- Fuel tank height and gap from underframe

2022-02-07
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-03-03
- Horn manifold and back cap dimensions

2023-01-09
- Long hood end seams
EMD GP38AC
  
1971-12 3 LV 310-313
2023-10-25Revision history:

2018-12-01
- Corrected minor line glitch on latches on first engine room door

2019-01-18
- Relocated front hood seam resulting in revised hood proportions
- Front section of hood lengthened and blower duct widened by 1"
- Gap from seam to middle hood doors shortened by 0.75"
- Middle hood doors shortened by 0.25"
- Increased height of walkway blower duct and bottom of hood doors
- Corrected seam at bottom corners of long hood
- Revised radiator intake grills and roof fan hatch
- Revised paper air filter housing and dynamic brake taper

2019-01-23
- Fuel tank and air reservoirs moved 1" to 1.5" rearward
- Corrected pipe overlapping bell

2020-12-04
- Revised side handrail stanchions
- Increased handrail thickness
- Revised radiator fan dimensions and spacing
- Fuel tank vent pipe (increased diameter, revised fittings)

2021-01-09
- Fuel tank height and gap from underframe

2022-01-29
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Revised ribs on blower duct

2022-03-02
- Horn manifold and back cap dimensions

2023-10-25
- Bottom latch on second hood door
EMD GP9
  
1959-10 3c LV 300-301
2023-07-10Revision history:

2020-12-05
- Increased handrail thickness
- Revised radiator fans

2022-01-03
- Larger roof lift rings
- Added lift rings around dynamic brakes
- Added lift rings on short hood
- Removed grabiron behind rear fan
- Exhaust stacks

2022-03-21
- Coupler cut lever and pilot details
- Corner handrail end plate / stairwell attachment points
- Corner step height increased by 2"
- Footboard height increased by 1.25"
- Revised coupler carrier / draft gear

2022-11-15
- Changed draft gear housing from M-375/MS-485 to M-380/M-381

2023-02-07
- Removed handrail stanchion top clamps

2023-02-16
- Fuel tank height
- Fuel filler

2023-07-10
- Moved latches under radiators from 2nd to 3rd door from long hood end (right side)
GE U23B
  
1974-11 2h1 LV 501-512
2022-03-15Revision history:

2020-02-11
- Corrected minor line glitch in front upper air intake (right side)
- Removed pipe behind fuel tank (right side)

2020-02-13
- Increased corner step spacing

2020-12-31
- Increased corner handrail thickness

2021-02-05
- Fuel filler

2021-02-09
- Air filter bracket and piping behind fuel tank (right side)
- Added sloped plate under frame behind draft gear
- Added missing section of angled pilot brace behind steps
- Added missing end transoms on trucks

2021-02-13
- Longer handrail stanchion in front of cab (right side)

2022-02-08
- Coupler cut lever and pilot details
- Corner handrail and step bolts
- Cab window gaskets

2022-03-15
- Horn manifold and back cap dimensions

1:36 Drawings

Model Built Phase Numbers Notes
EMD GP38-2
  
1972-11 1b LV 314-325
EMD GP38AC
  
1971-12 3 LV 310-313
GE U23B
  
1974-11 2h1 LV 501-512

1:55 Drawings

Model Phase Numbers Notes Accuracy
ALCO C-420
 
1 LV version
*Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
ALCO C-628
  
2b LV 625-629
* * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)
EMD GP38-2
  
1b LV 314-325
* *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate)
* * 2005-2007 drawings (generally accurate)
* 2000-2004 drawings (not dimensionally accurate)

See also: