Undecorated Drawings - NS
Selected scales: |
1:18 Drawings
Model | Built | Phase | Numbers | Notes | Last modified |
---|---|---|---|---|---|
EMD GP38-3 ← → | 2004-02 (R) | 1 | NS 5801 | NS GP50 rebuild | 2023-12-28Revision history:
2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) 2021-01-12 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height 2023-12-28 - Nathan P-series horn dimensions |
EMD GP38-3 ← → | 2004-06 - 2005-06 (R) | 2 | NS 5802-5808, 5811-5813 | " | 2022-12-21Revision history:
2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) 2021-01-12 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height |
EMD GP38-3 ← → | 2004-12 - 2005-06 (R) | " | NS 5809-5810, 5814 | " | 2022-12-21Revision history:
2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) 2021-01-12 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height |
EMD GP38-3 ← → | 2005-07 - 2005-09 (R) | 3 | NS 5815-5817, 5819 | " | 2022-12-21Revision history:
2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) 2021-01-12 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height |
EMD GP38-3 ← → | 2005-09 (R) | " | NS 5818 | " | 2023-12-28Revision history:
2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) 2021-01-12 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height 2023-12-28 - Nathan P-series horn dimensions |
EMD GP38-3 ← → | 2006-11 - 2006-12 (R) | 4 | NS 5820, 5823 | " | 2022-12-21Revision history:
2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) 2021-01-12 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height |
EMD GP38-3 ← → | 2006-12 (R) | " | NS 5821 | " | 2022-12-21Revision history:
2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) 2021-01-12 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height |
EMD GP38-3 ← → | 2006-12 (R) | " | NS 5822 | " | 2022-12-21Revision history:
2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) 2021-01-12 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height |
EMD GP38-3 ← → | 2006-12 - 2007-01 (R) | " | NS 5824-5829 | " | 2022-12-21Revision history:
2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) 2021-01-12 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height |
EMD GP38-3 ← → | 2007-02 - 2007-04 (R) | 5 | NS 5830-5834, 5836-5837 | " | 2022-12-21Revision history:
2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) 2021-01-12 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height |
EMD GP38-3 ← → | 2007-03 (R) | " | NS 5835 | " | 2022-12-21Revision history:
2019-08-06 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" (Phase 1 versions) - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-11 - Revised side handrail stanchions - Increased handrail thickness - Revised radiator and dynamic brake fan dimensions and spacing - Fuel tank vent pipe (increased diameter, revised fittings) - Air pipe vent valve (left front / right rear under walkway) 2021-01-12 - Fuel tank height and gap from underframe 2022-11-30 - Coupler cut lever and pilot details - Corner handrail end plate / stairwell attachment points - Revised ribs on blower duct 2022-12-21 - End handrail height |
EMD GP59 ← → | 1989-11 - 1989-12 | 2b | NS 4609-4641 | 2022-12-11Revision history:
2013-03-05 - Corner handrails, pilot braces, rear end plate - Traction motor cables 2014-02-15 - Truck shape and casting logo 2014-10-23 - Radiator and dynamic brake fans (bottom rim edge and upper rim clips) 2014-11-15 - Moved rear lift ring from roof to side - Revised inertial air intakes 2015-08-25 - Revised end handrails (center stanchions moved in from the end, modified stanchion/chain support) 2020-01-05 - Revised center hood door spacing - Revised hood behind cab - Blower duct widened by 1" - Increased height of walkway blower duct and bottom of hood doors - Corrected minor line glitch on latches on first engine room door 2020-12-15 - Increased handrail thickness - Fuel tank vent pipe (increased diameter, revised fittings) - Revised radiator and dynamic brake fan dimensions and spacing - Increased metal sand pipe diameter 2021-01-12 - Fuel tank height and gap from underframe 2021-02-10 - Revised side handrail stanchions 2022-12-11 - Coupler cut levers - Corner handrail end plate / stairwell attachment points - Anticlimber and MU receptacle brackets | |
EMD SD70ACe ← → | 2011-02 - 2011-03 | 2f | NS 1000-1024 | 2022-03-30Revision history:
2017-09-19 - Revised truck traction pin (near center axle on trucks) - Added minor truck details (bolts under axles and pins at radial-steering arm ends) - Smaller radiator fan diameter and spacing, fans moved rearward - Added missing section of air pipe behind front steps (left side) - Revised inverter cabinet grills 2017-11-11 - Relocated hole below handbrake wheel (right side) 2017-12-17 - Revised cables/pipes under back of cab (right side) 2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Added missing portion of brake levers near brake cylinders - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points | |
EMD SD70ACe ← → | 2011-10 - 2013-04 | 2f | NS 1025-1064, 1075-1099 | 2022-03-30Revision history:
2017-09-19 - Revised truck traction pin (near center axle on trucks) - Added minor truck details (bolts under axles and pins at radial-steering arm ends) - Smaller radiator fan diameter and spacing, fans moved rearward - Added missing section of air pipe behind front steps (left side) - Revised inverter cabinet grills 2017-11-11 - Relocated hole below handbrake wheel (right side) 2017-12-17 - Revised cables/pipes under back of cab (right side) 2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Added missing portion of brake levers near brake cylinders - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points | |
EMD SD70ACe ← → | 2012-05 | 2f | NS 1065-1074 | 2022-03-30Revision history:
2017-09-19 - Revised truck traction pin (near center axle on trucks) - Added minor truck details (bolts under axles and pins at radial-steering arm ends) - Smaller radiator fan diameter and spacing, fans moved rearward - Added missing section of air pipe behind front steps (left side) - Revised inverter cabinet grills 2017-11-11 - Relocated hole below handbrake wheel (right side) 2017-12-17 - Revised cables/pipes under back of cab (right side) 2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Added missing portion of brake levers near brake cylinders - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points | |
EMD SD70ACe ← → | 2014-02 - 2015-01 | 2f | NS 1100-1174 | 2022-03-30Revision history:
2017-09-19 - Revised truck traction pin (near center axle on trucks) - Added minor truck details (bolts under axles and pins at radial-steering arm ends) - Smaller radiator fan diameter and spacing, fans moved rearward - Added missing section of air pipe behind front steps (left side) - Revised inverter cabinet grills 2017-11-11 - Relocated hole below handbrake wheel (right side) 2017-12-17 - Revised cables/pipes under back of cab (right side) 2020-12-22 - Increased handrail thickness 2021-01-11 - Fuel tank height and gap from underframe 2022-01-21 - Added missing portion of brake levers near brake cylinders - Corrected line glitch above cab nose door (right side) 2022-03-30 - Coupler cut levers - Corner handrail end plate attachment points | |
GE AC44C6M ← → | 2015-08 (R) | NS 4000-4001 | Dash 9-40C rebuild; originally built 1995 | 2023-03-04Revision history:
2018-03-26 - Revised door width/spacing under central air intake (right side) - Added 2 holes below front cab sub-base door (right side) 2020-01-20 - Revised grabirons behind cab (left side) - Thinner handrails behind cab 2021-01-12 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-11 - Added numberboard seam - Coupler cut lever and pilot details - Corner handrail and step bolts 2023-03-04 - Traction motor cables (left side) | |
GE AC44C6M ← → | 2016-08 - 2016-10 (R) | NS 4002-4003 | " | 2023-03-04Revision history:
2018-03-26 - Revised door width/spacing under central air intake (right side) - Added 2 holes below front cab sub-base door (right side) 2020-01-20 - Revised grabirons behind cab (left side) 2021-01-12 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-11 - Added numberboard seam - Coupler cut lever and pilot details - Corner handrail and step bolts 2023-03-04 - Traction motor cables (left side) | |
GE AC44C6M ← → → | 2016-08 - 2018-12 (R) | NS 4004-4106, 4108-4124 | " | 2023-03-04Revision history:
2018-01-12 - Removed second cab side mirror 2018-03-26 - Revised door width/spacing under central air intake (right side) - Added 2 holes below front cab sub-base door (right side) 2020-01-20 - Revised grabirons behind cab (left side) 2021-01-12 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-11 - Added numberboard seam - Coupler cut lever and pilot details - Corner handrail and step bolts 2023-03-04 - Traction motor cables (left side) | |
GE AC44C6M ← → → | 2017-12 - 2021-08 (R) | NS 4107, some of 4125-4500 | Dash 9-44CW rebuild; originally built 1996-1997; ex-NS 8889-9008, 9009-9128 series | 2023-03-04Revision history:
2020-01-20 - Revised grabirons behind cab (left side) 2021-01-12 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-11 - Added numberboard seam - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height 2023-03-04 - Traction motor cables - Air pipes above air reservoirs (right side) | |
GE AC44C6M ← ← → → | " | " | Dash 9-44CW rebuild; originally built 1998-1999; ex-NS 9129-9169, 9170-9264, 9265-9441 series | 2023-03-04 | |
GE C36-7 ← → | 1984-05 | 2f | NS 8531-8542 | 2022-08-03Revision history:
2021-02-12 - Added safety valve to front air reservoir (left side) - Rear headlight and numberboards - Longer handrail stanchion in front of cab (right side) - Revised seams under door behind cab - Added drip rail over door behind cab 2022-08-03 - Coupler cut lever and pilot details - Corner handrail and step bolts - Horn manifold and back cap dimensions | |
GE C39-8 ← → | 1984-10 - 1984-11 | 1b | NS 8552-8563 | 2022-11-18Revision history:
2020-01-05 - Increased corner handrail thickness 2021-01-28 - Revised air reservoir height and brackets - Added missing section of bell (right side) 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts | |
GE C39-8 ← → | 1985-04 - 1985-08 | 2 | NS 8564-8613 | Adirondack trucks | 2022-11-18Revision history:
2020-01-05 - Increased corner handrail thickness 2021-01-28 - Revised air reservoir height and brackets - Added missing section of bell (right side) 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts |
GE C39-8 ← → | " | " | " | Rockwell trucks | 2022-11-18Revision history:
2020-01-05 - Increased corner handrail thickness 2021-01-28 - Revised air reservoir height and brackets - Added missing section of bell (right side) 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts |
GE C39-8 ← → | 1986-05 - 1986-06 | 3a | NS 8614-8638 | Adirondack trucks | 2022-11-18Revision history:
2020-01-05 - Increased corner handrail thickness 2021-01-28 - Revised air reservoir height and brackets - Added missing section of bell (right side) 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts |
GE C39-8 ← → | " | " | " | Rockwell trucks | 2022-11-18Revision history:
2020-01-05 - Increased corner handrail thickness 2021-01-28 - Revised air reservoir height and brackets - Added missing section of bell (right side) 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts |
GE C39-8 ← → | 1986-08 - 1986-10 | 3b | NS 8639-8663 | 2022-11-18Revision history:
2020-01-05 - Increased corner handrail thickness 2021-01-28 - Revised air reservoir height and brackets - Added missing section of bell (right side) 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts | |
GE C39-8 ← → | 1987-03 - 1987-06 | NS 8664-8688 | Unofficially referred to as C39-8E Adirondack trucks | 2022-11-18Revision history:
2016-05-09 - Added missing front class lights 2020-01-05 - Increased corner handrail thickness 2021-01-28 - Revised air reservoir height and brackets - Added missing section of bell (right side) 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts | |
GE C39-8 ← → | " | " | " Rockwell trucks | 2022-11-18Revision history:
2020-01-05 - Increased corner handrail thickness 2021-01-28 - Revised air reservoir height and brackets - Added missing section of bell (right side) 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts | |
GE Dash 8-32B ← → | 1989-10 - 1989-12 | NS 3522-3566 | 2022-11-14Revision history:
2015-01-05 - Radiator roof grill dimensions - Left-side fuel tank fittings - Dynamic brake roof panels - Front anticlimber 2015-08-07 - Removed right rear hood grabiron 2021-01-05 - Increased corner handrail thickness - Revised end handrail stanchions 2021-01-28 - Revised air reservoir height and brackets 2022-11-14 - Coupler cut lever and pilot details - Corner handrail and step bolts | ||
GE Dash 8-40C ← → | 1990-12 - 1991-03 | 2b | NS 8689-8713 | Vertical short hood grabirons added shortly after delivery | 2022-11-18Revision history:
2015-01-05 - Dynamic brake roof panels 2015-07-03 - Anticlimber MU cutout - Corner handrails 2015-07-08 - Corrected air reservoir length (right side) - Rremoved rear hood end grabiron 2015-07-21 - Revised vertical bars in dynamic brake intakes 2017-06-05 - Changed top of short hood from sloped to flat 2021-01-05 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts |
GE Dash 8-40C ← → | 1992-08 - 1992-12 | 2b | NS 8714-8763 | 2022-11-18Revision history:
2015-01-05 - Dynamic brake roof panels 2015-07-03 - Anticlimber MU cutout - Corner handrails - Anticlimber step, ditch lights, MU connections 2015-07-08 - Corrected air reservoir length (right side) - Corrected rear hood end grabiron 2015-07-21 - Revised vertical bars in dynamic brake intakes 2017-06-05 - Changed top of short hood from sloped to flat 2021-01-05 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-18 - Coupler cut lever and pilot details - Corner handrail and step bolts | |
GE Dash 9-40C ← → | 1995-01 - 1995-04 | 1e | NS 8764-8888 | 2022-11-12Revision history:
2017-06-05 - Changed top of short hood from sloped to flat 2017-09-29 - Added missing handrail stanchion clips on 2 middle stanchions - Removed fuel tank seam 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2020-10-20 - Revised truck brake piping - Reversed orientation of truck brake hose (right side) 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Coupler cut lever and pilot details - Corner handrail and step bolts | |
GE Dash 9-40CW ← → | 1996-01 - 1996-02 | 2a | NS 8889-8931 | 2022-11-12Revision history:
2016-02-06 - Shortened rear-most hood intake under radiator intakes 2016-02-20 - Added traction pin in center of trucks 2017-01-30 (8889 only) - Added angled panel behind right-side radiator intake 2017-01-23 - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location (slightly taller, moved slightly upward) 2017-02-08 - Added empty handbrake chain bracket to front right truck - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2018-12-28 - Corrected underframe line glitch above fuel gauge 2019-10-03 - Revised rear ditch lights 2020-10-20 - Revised truck brake piping - Reversed orientation of truck brake hose (right-side) 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height | |
GE Dash 9-40CW ← ← → | 1996-02 - 1996-04 | 2a | NS 8932-8947, 8948-9008 | 2022-11-12Revision history:
2016-02-06 - Shortened rear-most hood intake under radiator intakes 2016-02-20 - Added traction pin in center of trucks 2017-01-23 - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location (slightly taller, moved slightly upward) 2017-02-08 - Added empty handbrake chain bracket to front right truck - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2018-12-28 (8889-9128) - Corrected underframe line glitch above fuel gauge 2019-10-03 - Revised rear ditch lights 2020-10-20 - Revised truck brake piping - Reversed orientation of truck brake hose (right-side) 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height | |
GE Dash 9-40CW ← → | 1997-02 - 1997-05 | 2a | NS 9009-9128 | 2022-11-12Revision history:
2016-02-06 - Shortened rear-most hood intake under radiator intakes 2016-02-20 - Added traction pin in center of trucks 2017-01-23 - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location (slightly taller, moved slightly upward) 2017-02-08 - Added empty handbrake chain bracket to front right truck - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2018-12-28 - Corrected underframe line glitch above fuel gauge 2019-10-03 - Revised rear ditch lights 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height | |
GE Dash 9-40CW ← ← → → | 1998-02 - 1998-10 | 2c1, 2c2, 2d | NS 9129-9154, 9155-9169, 9170-9258 | 2022-11-12Revision history:
2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2017-01-23 - Fuel tank seam - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location (slightly taller, moved slightly upward) 2017-02-08 - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2019-10-03 - Revised rear ditch lights 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height | |
GE Dash 9-40CW ← → | 1998-10 | 2d | NS 9259-9264 | 2022-11-12Revision history:
2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2017-01-23 - Fuel tank seam - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location (slightly taller, moved slightly upward) 2017-02-08 - Added empty handbrake chain bracket to front right truck - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2019-10-03 - Revised rear ditch lights 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height | |
GE Dash 9-40CW ← → | 1999-02- 2000-03 | 2f | NS 9265-9441 | 2022-11-12Revision history:
2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2017-01-23 - Fuel tank seam - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location (slightly taller, moved slightly upward) 2017-02-08 - Added empty handbrake chain bracket to front right truck - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2019-10-03 - Revised rear ditch lights 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height | |
GE Dash 9-40CW ← ← → | 2000-03 - 2000-05 | 2f | NS 9442-9529, 9530-9534 | 2022-11-12Revision history:
2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2017-01-23 - Fuel tank seam - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location (slightly taller, moved slightly upward) 2017-02-08 - Added empty handbrake chain bracket to front right truck - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2019-10-03 - Revised rear ditch lights 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height | |
GE Dash 9-40CW ← → | 2000-12 - 2001-12 | 2g | NS 9535-9719 | 2022-11-12Revision history:
2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2017-01-23 - Fuel tank seam - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location (slightly taller, moved slightly upward) 2017-02-08 - Added empty handbrake chain bracket to front right truck - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2019-10-03 - Revised rear ditch lights 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height | |
GE Dash 9-40CW ← → | 2001-12 | 2g | NS 9720-9744 | 2022-11-12Revision history:
2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2017-01-23 - Fuel tank seam - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location (slightly taller, moved slightly upward) 2017-02-08 - Added empty handbrake chain bracket to front right truck - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2019-10-03 - Revised rear ditch lights 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height | |
GE Dash 9-40CW ← ← → | 2003-01 - 2004-03 | 2h | NS 9745-9811, 9812-9841 | 2022-11-12Revision history:
2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2017-01-23 - Fuel tank seam - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location (slightly taller, moved slightly upward) 2017-02-08 - Added empty handbrake chain bracket to front right truck - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2019-10-03 - Revised rear ditch lights 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height | |
GE Dash 9-40CW ← → | 2004-03 - 2004-05 | 2h | NS 9842-9886 | 2022-11-12Revision history:
2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2017-01-23 - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location (slightly taller, moved slightly upward) 2017-02-08 - Added empty handbrake chain bracket to front right truck - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2019-10-03 - Revised rear ditch lights 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height | |
GE Dash 9-40CW ← → | 2004-09 - 2004-12 | 2h | NS 9887-9978 | 2022-11-12Revision history:
2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2017-01-23 - Piping behind fuel tank 2017-01-25 - Revised cab side window size and location (slightly taller, moved slightly upward) 2017-02-08 - Added empty handbrake chain bracket to front right truck - Corrected location of hinges on first 2 hood doors under front air intake (left side) 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2019-10-03 - Revised rear ditch lights 2021-01-04 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-12 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts - Step height | |
GE ES40DC ← → | 2004-03 - 2004-05 | 1b | NS 7500-7514 | 2022-11-29Revision history:
2014-02-22 - Truck casting logo and text - Short hood height 2015-07-08 - Added missing brake line on truck near brake chain (left side) - Corrected air reservoir length - Added missing sand hose in front underframe (right side) 2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2016-11-17 - Lowered latch on hood door below exhaust stack (right side) 2017-01-25 - Revised cab side window size and location (slightly taller; moved slightly upward) - Revised sunshade - Added 4 holes behind left front jacking pad 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2018-03-26 - Revised door width/spacing under central air intake - Added 2 holes below front cab sub-base door 2019-10-03 - Revised rear ditch lights 2021-01-06 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-13 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts 2022-11-28 - Added AEI tag above left rear truck - Removed chain posts on end handrails | |
GE ES40DC ← ← → | 2005-11 - 2006-06 | 1c, 1d | NS 7515-7564, 7565-7579 | 2022-11-29Revision history:
2014-02-22 - Truck casting logo and text - Short hood height 2015-07-08 - Corrected air reservoir length - Added missing sand hose in front underframe (right side) 2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2016-11-17 - Lowered latch on hood door below exhaust stack (right side) 2017-01-25 - Revised cab side window size and location (slightly taller; moved slightly upward) - Revised sunshade - Added 4 holes behind left front jacking pad 2017-02-08 - Added empty handbrake chain bracket to front right truck 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2018-03-26 - Revised door width/spacing under central air intake - Added 2 holes below front cab sub-base door 2019-10-03 - Revised rear ditch lights 2021-01-06 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-13 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts 2022-11-28 - Added AEI tag above left rear truck - Removed chain posts on end handrails | |
GE ES40DC ← → | 2006-06 - 2006-10 | 1e | NS 7580-7616 | 2022-11-29Revision history:
2014-02-22 - Truck casting logo and text - Short hood height 2015-07-08 - Corrected air reservoir length - Added missing sand hose in front underframe (right side) 2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2016-11-17 - Lowered latch on hood door below exhaust stack (right side) 2017-01-25 - Revised cab side window size and location (slightly taller; moved slightly upward) - Revised sunshade - Added 4 holes behind left front jacking pad 2017-02-08 - Added empty handbrake chain bracket to front right truck 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2018-03-26 - Revised door width/spacing under central air intake - Added 2 holes below front cab sub-base door 2019-10-03 - Revised rear ditch lights 2021-01-06 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-13 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts 2022-11-28 - Added AEI tag above left rear truck - Removed chain posts on end handrails | |
GE ES40DC ← → | 2007-02 - 2007-04 | 1f | NS 7617-7655 | 2022-11-29Revision history:
2014-02-22 - Truck casting logo and text - Short hood height 2015-07-08 - Corrected air reservoir length - Added missing sand hose in front underframe (right side) 2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2016-11-17 - Lowered latch on hood door below exhaust stack (right side) 2017-01-25 - Revised cab side window size and location (slightly taller; moved slightly upward) - Added 4 holes behind left front jacking pad 2017-02-08 - Added empty handbrake chain bracket to front right truck 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2018-03-26 - Revised door width/spacing under central air intake - Added 2 holes below front cab sub-base door 2019-10-03 - Revised rear ditch lights 2021-01-06 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-13 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts 2022-11-28 - Added AEI tag above left rear truck - Removed chain posts on end handrails | |
GE ES40DC ← → | 2007-04 - 2008-02 | 2b | NS 7656-7719 | 2022-11-29Revision history:
2014-02-22 - Truck casting logo and text - Short hood height 2015-07-08 - Corrected air reservoir length - Added missing sand hose in front underframe (right side) 2016-02-20 - Added traction pin in center of trucks 2016-10-09 - Added cab signalling sensor behind steps 2016-11-17 - Lowered latch on hood door below exhaust stack (right side) 2017-01-25 - Revised cab side window size and location (slightly taller; moved slightly upward) - Added 4 holes behind left front jacking pad 2017-02-08 - Added empty handbrake chain bracket to front right truck 2017-02-18 - Corrected location of 3rd handrail stanchion from rear and rear air pipe vent valve (immediately under stanchion) 2018-03-26 - Revised door width/spacing under central air intake - Added 2 holes below front cab sub-base door 2019-10-03 - Revised rear ditch lights 2021-01-06 - Increased corner handrail thickness - Revised end handrail stanchions 2022-11-13 - Cab door window height - Coupler cut lever and pilot details - Corner handrail and step bolts 2022-11-28 - Added AEI tag above left rear truck - Removed chain posts on end handrails | |
GE ES44AC ← → | 2008-09 - 2008-10 | 2c | NS 8000-8023 | 2022-11-29Revision history:
2020-01-14 - Revised grabirons behind cab (left-side) 2021-01-06 - Increased corner handrail thickness - Revised end handrail stanchions 2022-01-09 - Added numberboard seam - Cab door window height - Corrected line glitch on right front / left rear traction motor air duct 2022-11-12 - Coupler cut lever and pilot details - Corner handrail and step bolts - Added missing truck brake piping (left side) 2022-11-28 - Added AEI tag above left rear truck | |
GE ES44AC ← → | 2010-09 - 2011-03 | 2e | NS 8024-8090 | 2022-11-29Revision history:
2020-01-14 - Revised grabirons behind cab (left-side) - Revised wide handrail stanchions 2021-01-12 - Increased corner handrail thickness - Revised end handrail stanchions 2022-01-09 - Added numberboard seam - Cab door window height - Corrected line glitch on right front / left rear traction motor air duct 2022-11-12 - Coupler cut lever and pilot details - Corner handrail and step bolts - Added missing truck brake piping (left side) 2022-11-28 - Added AEI tag above left rear truck | |
GE ES44AC ← → | 2012-02 - 2012-12 | 2f1 | NS 8091-8140 | 2022-11-29Revision history:
2019-08-12 - Corrected minor transparency issue in radiators (left side) 2020-01-14 - Revised grabirons behind cab (left-side) - Revised wide handrail stanchions 2021-01-12 - Increased corner handrail thickness - Revised end handrail stanchions 2022-01-09 - Added numberboard seam - Corrected line glitch on right front / left rear traction motor air duct - Added missing sight glass under right side radiators 2022-11-12 - Coupler cut lever and pilot details - Corner handrail and step bolts - Added missing truck brake piping (left side) 2022-11-28 - Added AEI tag above left rear truck | |
GE ES44AC ← → | 2013-09 | 2f2 | NS 8141-8165 | 2022-11-29Revision history:
2019-08-12 - Corrected minor transparency issue in radiators (left side) 2020-01-14 - Revised grabirons behind cab (left-side) - Revised wide handrail stanchions - Thinner side handrails 2021-01-12 - Increased corner and side handrail thickness - Revised end handrail stanchions 2022-01-09 - Added numberboard seam - Corrected line glitch on right front / left rear traction motor air duct - Added missing sight glass under right side radiators 2022-11-12 - Coupler cut lever and pilot details - Corner handrail and step bolts - Added missing truck brake piping (left side) 2022-11-28 - Added AEI tag above left rear truck | |
GE ES44AC ← → | 2016-05 | 2g | NS 8166-8168 | 2022-11-29Revision history:
2020-01-14 - Revised grabirons behind cab (left-side) - Revised wide handrail stanchions - Thinner side handrails 2021-01-12 - Increased corner and side handrail thickness - Revised end handrail stanchions 2022-01-09 - Added numberboard seam - Corrected line glitch on right front / left rear traction motor air duct - Added missing sight glass under right side radiators 2022-11-12 - Coupler cut lever and pilot details - Corner handrail and step bolts - Added missing truck brake piping (left side) 2022-11-28 - Added AEI tag above left rear truck | |
GE ET44AC ← → | 2016-05 - 2017-02 | NS 3600-3680 | 2022-11-29 |
1:36 Drawings
Model | Built | Phase | Numbers | Notes |
---|---|---|---|---|
EMD SD70 ← → | 1993-11 - 1994-09 | 1b | NS 2507-2556 | |
EMD SD70M-2 ← → | 2005-10 - 2006-01 | 2a1 | NS 2649-2700 | |
EMD SD70M-2 ← → | 2006-01 - 2006-05 | 2a1 | NS 2701-2778 | |
GE C39-8 ← → | 1984-10 - 1984-11 | 1b | NS 8552-8563 | |
GE C39-8 ← → | " | " | " | As modified |
GE C39-8 ← → | 1985-04 - 1985-08 | 2 | NS 8564-8613 | Adirondack trucks |
GE C39-8 ← → | " | " | " | Rockwell trucks |
GE C39-8 ← → | " | " | " | Adirondack trucks As modified |
GE C39-8 ← → | " | " | " | Rockwell trucks As modified |
GE C39-8 ← → | 1986-05 - 1986-06 | 3a | NS 8614-8638 | Adirondack trucks |
GE C39-8 ← → | " | " | " | Rockwell trucks |
GE C39-8 ← → | " | " | " | Adirondack trucks As modified |
GE C39-8 ← → | " | " | " | Rockwell trucks As modified |
GE C39-8 ← → | 1986-08 - 1986-10 | 3b | NS 8639-8663 | |
GE C39-8 ← → | " | " | " | As modified |
GE C39-8 ← → | 1987-03 - 1987-06 | NS 8664-8688 | Unofficially referred to as C39-8E | |
GE Dash 8-40C ← → | 1990-12 - 1992-10 | NS 8689-8763 | ||
GE Dash 9-40C ← → | 1995-01 - 1995-04 | NS 8764-8888 | ||
GE Dash 9-40CW ← ← ← → | 1996-01 - 1997-05 | NS 8889-8947, 8948-9008, 9009-9128 | ||
GE Dash 9-40CW ← ← → → | 1998-02 - 1998-10 | NS 9129-9154, 9155-9169, 9170-9257 | ||
GE Dash 9-40CW ← → | 1998-10 | NS 9258-9264 | ||
GE Dash 9-40CW ← → | 1999-02 - 2000-05 | NS 9265-9529 | ||
GE Dash 9-40CW ← → | 2000-05 - 2001-12 | NS 9530-9719 | ||
GE Dash 9-40CW ← → | 2001-12 | NS 9720-9744 | ||
GE Dash 9-40CW ← → | 2003-01 - 2004-05 | NS 9745-9841 | ||
GE Dash 9-40CW ← → | 2003-01 - 2004-05 | NS 9842-9886 | ||
GE Dash 9-40CW ← → | 2004-09 - 2004-12 | NS 9887-9978 | ||
GE ES40DC ← → | 2004-03 - 2004-05 | 1b | NS 7500-7514 | |
GE ES40DC ← ← → | 2005-11 - 2006-06 | 1c, 1d | NS 7515-7564, 7565-7579 | |
GE ES40DC ← → | 2006-06 - 2006-10 | 1e | NS 7580-7616 | |
GE ES40DC ← → | 2007-02 - 2007-04 | 1f | NS 7617-7655 | |
GE ES40DC ← → | 2007-04 - 2008-02 | 2b | NS 7656-7719 | |
GE ES44AC ← → | 2008-09 - 2008-10 | 2c | NS 8000-8023 |
1:55 Drawings
Model | Phase | Numbers | Notes | Accuracy |
---|---|---|---|---|
EMD GP18 ← → | 2 | NS 1-17 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38-2 ← → | CP 4520 | ex-NS GP50 rebuild | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP38-3 ← → | NS 5801-5819 | GP50 rebuild | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP59 ← → | 1 | NS 4606-4607 | ex-EMDX 8-9 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD GP59 ← → | 1 | NS 4608 | ex-EMDX 10 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
EMD GP59 ← → | 2b | NS 4609-4641 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD GP60 ← → | 2d | NS 7101-7150 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD60 ← → | NS 6676-6700 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
EMD SD70 ← → | 1b | NS 2507-2556 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD70M ← → | 1f | NS 2581-2590 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD70M ← → | 2g | NS 2591-2623 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD70M-2 ← → | 2a1 | NS 2649-2700 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
EMD SD70M-2 ← → | 2a1 | NS 2701-2778 | * * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE C39-8 ← → | NS 8550-8563 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
GE C39-8 ← → | NS 8564-8613 | Adirondack FB-3 trucks | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE C39-8 ← → | " | Rockwell FB-3 trucks | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE C39-8 ← → | NS 8614-8638 | Adirondack FB-3 trucks | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE C39-8 ← → | " | Rockwell FB-3 trucks | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE C39-8 ← → | NS 8639-8663 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
GE C39-8 ← → | NS 8664-8688 | Unofficially referred to as C39-8E | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | |
GE Dash 8-32B ← → | NS 3522-3566 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
GE Dash 8-40C ← → | NS 8689-8763 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
GE Dash 9-40C ← → | NS 8764-8888 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
GE Dash 9-40CW ← ← → | NS 8889-8947, 8948-9128, 9129-9258 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
GE Dash 9-40CW ← → | NS 9129-9258, 9259-9529 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
GE Dash 9-40CW ← ← → | NS 9530-9744, 9745-9841 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
GE Dash 9-40CW ← → | NS 9842-9978 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) | ||
GE ES40DC ← → | NS 7500-7514 | * *Accuracy legend for 1:55 drawings:
* * * 2007-2008 drawings (mostly accurate) * * 2005-2007 drawings (generally accurate) * 2000-2004 drawings (not dimensionally accurate) |
See also: